Download or read book Automotive Embedded Systems Handbook written by Nicolas Navet and published by CRC Press. This book was released on 2017-12-19 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Clear Outline of Current Methods for Designing and Implementing Automotive Systems Highlighting requirements, technologies, and business models, the Automotive Embedded Systems Handbook provides a comprehensive overview of existing and future automotive electronic systems. It presents state-of-the-art methodological and technical solutions in the areas of in-vehicle architectures, multipartner development processes, software engineering methods, embedded communications, and safety and dependability assessment. Divided into four parts, the book begins with an introduction to the design constraints of automotive-embedded systems. It also examines AUTOSAR as the emerging de facto standard and looks at how key technologies, such as sensors and wireless networks, will facilitate the conception of partially and fully autonomous vehicles. The next section focuses on networks and protocols, including CAN, LIN, FlexRay, and TTCAN. The third part explores the design processes of electronic embedded systems, along with new design methodologies, such as the virtual platform. The final section presents validation and verification techniques relating to safety issues. Providing domain-specific solutions to various technical challenges, this handbook serves as a reliable, complete, and well-documented source of information on automotive embedded systems.

Download or read book Automotive Embedded Systems Handbook written by Nicolas Navet and published by CRC Press. This book was released on 2017-12-19 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Clear Outline of Current Methods for Designing and Implementing Automotive Systems Highlighting requirements, technologies, and business models, the Automotive Embedded Systems Handbook provides a comprehensive overview of existing and future automotive electronic systems. It presents state-of-the-art methodological and technical solutions in the areas of in-vehicle architectures, multipartner development processes, software engineering methods, embedded communications, and safety and dependability assessment. Divided into four parts, the book begins with an introduction to the design constraints of automotive-embedded systems. It also examines AUTOSAR as the emerging de facto standard and looks at how key technologies, such as sensors and wireless networks, will facilitate the conception of partially and fully autonomous vehicles. The next section focuses on networks and protocols, including CAN, LIN, FlexRay, and TTCAN. The third part explores the design processes of electronic embedded systems, along with new design methodologies, such as the virtual platform. The final section presents validation and verification techniques relating to safety issues. Providing domain-specific solutions to various technical challenges, this handbook serves as a reliable, complete, and well-documented source of information on automotive embedded systems.

Download or read book Automotive Embedded Systems written by M. Kathiresh and published by Springer Nature. This book was released on 2021-04-24 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of the recent technologies and innovations in the field of automotive embedded systems with a special mention to the role of Internet of Things in automotive systems. The book provides easy interpretable explanations for the key technologies involved in automotive embedded systems. The authors illustrate various diagnostics over internet protocol and over-the-air update process, present advanced driver assistance systems, discuss various cyber security issues involved in connected cars, and provide necessary information about Autosar and Misra coding standards. The book is relevant to academics, professionals, and researchers.

Download or read book Distributed Automotive Embedded Systems written by Ronald K. Jurgen and published by . This book was released on 2007 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Embedded Software Timing written by Peter Gliwa and published by Springer Nature. This book was released on 2021-02-09 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Without correct timing, there is no safe and reliable embedded software. This book shows how to consider timing early in the development process for embedded systems, how to solve acute timing problems, how to perform timing optimization, and how to address the aspect of timing verification. The book is organized in twelve chapters. The first three cover various basics of microprocessor technologies and the operating systems used therein. The next four chapters cover timing problems both in theory and practice, covering also various timing analysis techniques as well as special issues like multi- and many-core timing. Chapter 8 deals with aspects of timing optimization, followed by chapter 9 that highlights various methodological issues of the actual development process. Chapter 10 presents timing analysis in AUTOSAR in detail, while chapter 11 focuses on safety aspects and timing verification. Finally, chapter 12 provides an outlook on upcoming and future developments in software timing. The number of embedded systems that we encounter in everyday life is growing steadily. At the same time, the complexity of the software is constantly increasing. This book is mainly written for software developers and project leaders in industry. It is enriched by many practical examples mostly from the automotive domain, yet the vast majority of the book is relevant for any embedded software project. This way it is also well-suited as a textbook for academic courses with a strong practical emphasis, e.g. at applied sciences universities. Features and Benefits * Shows how to consider timing in the development process for embedded systems, how to solve timing problems, and how to address timing verification * Enriched by many practical examples mostly from the automotive domain * Mainly written for software developers and project leaders in industry

Download or read book Automotive Systems and Software Engineering written by Yanja Dajsuren and published by Springer. This book was released on 2019-07-17 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state of the art, challenges and future trends in automotive software engineering. The amount of automotive software has grown from just a few lines of code in the 1970s to millions of lines in today’s cars. And this trend seems destined to continue in the years to come, considering all the innovations in electric/hybrid, autonomous, and connected cars. Yet there are also concerns related to onboard software, such as security, robustness, and trust. This book covers all essential aspects of the field. After a general introduction to the topic, it addresses automotive software development, automotive software reuse, E/E architectures and safety, C-ITS and security, and future trends. The specific topics discussed include requirements engineering for embedded software systems, tools and methods used in the automotive industry, software product lines, architectural frameworks, various related ISO standards, functional safety and safety cases, cooperative intelligent transportation systems, autonomous vehicles, and security and privacy issues. The intended audience includes researchers from academia who want to learn what the fundamental challenges are and how they are being tackled in the industry, and practitioners looking for cutting-edge academic findings. Although the book is not written as lecture notes, it can also be used in advanced master’s-level courses on software and system engineering. The book also includes a number of case studies that can be used for student projects.

Download or read book Embedded Security in Cars written by Kerstin Lemke and published by Springer. This book was released on 2010-10-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most innovations in the car industry are based on software and electronics, and IT will soon constitute the major production cost factor. It seems almost certain that embedded IT security will be crucial for the next generation of applications. Yet whereas software safety has become a relatively well-established field, the protection of automotive IT systems against manipulation or intrusion has only recently started to emerge. Lemke, Paar, and Wolf collect in this volume a state-of-the-art overview on all aspects relevant for IT security in automotive applications. After an introductory chapter written by the editors themselves, the contributions from experienced experts of different disciplines are structured into three parts. "Security in the Automotive Domain" describes applications for which IT security is crucial, like immobilizers, tachographs, and software updates. "Embedded Security Technologies" details security technologies relevant for automotive applications, e.g., symmetric and asymmetric cryptography, and wireless security. "Business Aspects of IT Systems in Cars" shows the need for embedded security in novel applications like location-based navigation systems and personalization. The first book in this area of fast-growing economic and scientific importance, it is indispensable for both researchers in software or embedded security and professionals in the automotive industry.

Download or read book Software Engineering for Embedded Systems written by Inga Harris and published by Elsevier Inc. Chapters. This book was released on 2013-04-01 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter introduces the automotive system, which is unlike any other, characterized by its rigorous planning, architecting, development, testing, validation and verification. The physical task of writing embedded software for automotive applications versus other application areas is not significantly different from other embedded systems, but the key differences are the quality standards which must be followed for any development and test project. To write automotive software the engineer needs to understand how and why the systems have evolved into the complex environment it is today. They must be aware of the differences and commonalties between the automotive submarkets. They must be familiar with the applicable quality standards and why such strict quality controls exist, along with how quality is tested and measured, all of which are described in this chapter with examples of the most common practices. This chapter introduces various processes to help software engineers write high-quality, fault-tolerant, interoperable code such as modeling, autocoding and advanced trace and debug assisted by the emergence of the latest AUTOSAR and ISO26262 standards, as well as more traditional standards such as AEC, OBD-II and MISRA.

Download or read book Software Engineering for Automotive Systems written by P. Sivakumar and published by CRC Press. This book was released on 2022-08-08 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software Engineering for Automotive Systems: Principles and Applications discusses developments in the field of software engineering for automotive systems. This reference text presents detailed discussion of key concepts including timing analysis and reliability, validation and verification of automotive systems, AUTOSAR architecture for electric vehicles, automotive grade Linux for connected cars, open-source architecture in the automotive software industry, and communication protocols in the automotive software development process. Aimed at senior undergraduate and graduate students in the fields of electrical engineering, electronics and communication engineering, and automobile engineering, this text: Provides the fundamentals of automotive software architectures. Discusses validation and verification of automotive systems. Covers communication protocols in the automotive software development process. Discusses AUTOSAR architecture for electric vehicles. Examines open-source architecture in the automotive software industry.

Download or read book Multiplexed Networks for Embedded Systems written by Dominique Paret and published by John Wiley & Sons. This book was released on 2007-06-13 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiplexed networks are essential for the unified, efficient and cost-effective exchange of electronic information within embedded component systems. This is especially important in automotive manufacturing as vehicles become increasingly reliant on robust electronic networks and systems for improved reliability, anti-lock brake systems (ABS), steering, on-board navigation systems, and much more. The latest systems such as X-by-Wire and FlexRay aim to produce faster, fault-tolerant network component interconnects, for state-of-the-art network implementation and safer, more reliable engineering of vehicular systems. This book provides a thorough and comprehensive introduction to automotive multiplexed network buses, covering the technical principles, components, implementation issues and applications. Key features: Presents a thorough coverage of the controller area network (CAN) protocol, including information on physical layers, conformity problems, hardware and software tools, and application layers. Gives a detailed description of the new local interconnect network (LIN) bus, setting out its developments, properties, problems and ways to overcome these. Examines the existing and emerging network buses such as time-triggered CAN (TTCAN), FlexRay and X-by-Wire. Explores the possibilities for linking the various buses that are discussed, explaining how the Fail-Safe-System basis chip (SBC) and other gateways are designed and constructed. Analyses wired and wireless internal and external serial links, including Safe-by-Wire plus, I2C, Media Oriented Systems Transport (MOST), remote keyless entry, tyre pressure monitoring systems (TPMS) and Bluetooth. A valuable guide to embedded systems for a range of applications, Multiplexed Networks for Embedded Systems: CAN, LIN, FlexRay, Safe-by-Wire...is essential reading for electronics engineers and researchers developing electronics for the automotive industry. It is also useful for practising aerospace engineers and other practitioners interested in the application of network technologies, and advanced students taking courses on automotive and embedded system design.

Download or read book Automotive Software Engineering written by Thomas Zurawka and published by SAE International. This book was released on 2016-09-18 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the early seventies, the development of the automobile has been characterized by a steady increase in the deploymnet of onboard electronics systems and software. This trend continues unabated and is driven by rising end-user demands and increasingly stringent environmental requirements. Today, almost every function onboard the modern vehicle is electronically controlled or monitored. The software-based implementation of vehicle functions provides for unparalleled freedoms of concept and design. However, automobile development calls for the accommodation of contrasting prerequisites – such as higher demands on safety and reliability vs. lower cost ceilings, longer product life cycles vs. shorter development times – along with growing proliferation of model variants. Automotive Software Engineering has established its position at the center of these seemingly conflicting opposites. This book provides background basics as well as numerous suggestions, rare insights, and cases in point concerning those processes, methods, and tools that contribute to the surefooted mastery of the use of electronic systems and software in the contemporary automobile.

Download or read book Automotive Software Architectures written by Miroslaw Staron and published by Springer Nature. This book was released on 2021-03-01 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the concept of software architecture as one of the cornerstones of software in modern cars. Following a historical overview of the evolution of software in modern cars and a discussion of the main challenges driving that evolution, Chapter 2 describes the main architectural styles of automotive software and their use in cars’ software. Chapter 3 details this further by presenting two modern architectural styles, i.e. centralized and federated software architectures. In Chapter 4, readers will find a description of the software development processes used to develop software on the car manufacturers’ side. Chapter 5 then introduces AUTOSAR – an important standard in automotive software. Chapter 6 goes beyond simple architecture and describes the detailed design process for automotive software using Simulink, helping readers to understand how detailed design links to high-level design. The new chapter 7 reports on how machine learning is exploited in automotive software e.g. for image recognition and how both on-board and off-board learning are applied. Next, Chapter 8 presents a method for assessing the quality of the architecture – ATAM (Architecture Trade-off Analysis Method) – and provides a sample assessment, while Chapter 9 presents an alternative way of assessing the architecture, namely by using quantitative measures and indicators. Subsequently Chapter 10 dives deeper into one of the specific properties discussed in Chapter 8 – safety – and details an important standard in that area, the ISO/IEC 26262 norm. Lastly, Chapter 11 presents a set of future trends that are currently emerging and have the potential to shape automotive software engineering in the coming years. This book explores the concept of software architecture for modern cars and is intended for both beginning and advanced software designers. It mainly aims at two different groups of audience – professionals working with automotive software who need to understand concepts related to automotive architectures, and students of software engineering or related fields who need to understand the specifics of automotive software to be able to construct cars or their components. Accordingly, the book also contains a wealth of real-world examples illustrating the concepts discussed and requires no prior background in the automotive domain. Compared to the first edition, besides the two new chapters 3 and 7 there are considerable updates in chapters 5 and 8 especially.

Download or read book Automotive Electronics Design Fundamentals written by Najamuz Zaman and published by Springer. This book was released on 2015-08-19 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the topology behind automotive electronics architectures and examines how they can be profoundly augmented with embedded controllers. These controllers serve as the core building blocks of today’s vehicle electronics. Rather than simply teaching electrical basics, this unique resource focuses on the fundamental concepts of vehicle electronics architecture, and details the wide variety of Electronic Control Modules (ECMs) that enable the increasingly sophisticated "bells & whistles" of modern designs. A must-have for automotive design engineers, technicians working in automotive electronics repair centers and students taking automotive electronics courses, this guide bridges the gap between academic instruction and industry practice with clear, concise advice on how to design and optimize automotive electronics with embedded controllers.

Download or read book Embedded Security in Cars written by Kerstin Lemke and published by Springer Science & Business Media. This book was released on 2006-03-28 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most innovations in the car industry are based on software and electronics, and IT will soon constitute the major production cost factor. It seems almost certain that embedded IT security will be crucial for the next generation of applications. Yet whereas software safety has become a relatively well-established field, the protection of automotive IT systems against manipulation or intrusion has only recently started to emerge. Lemke, Paar, and Wolf collect in this volume a state-of-the-art overview on all aspects relevant for IT security in automotive applications. After an introductory chapter written by the editors themselves, the contributions from experienced experts of different disciplines are structured into three parts. "Security in the Automotive Domain" describes applications for which IT security is crucial, like immobilizers, tachographs, and software updates. "Embedded Security Technologies" details security technologies relevant for automotive applications, e.g., symmetric and asymmetric cryptography, and wireless security. "Business Aspects of IT Systems in Cars" shows the need for embedded security in novel applications like location-based navigation systems and personalization. The first book in this area of fast-growing economic and scientific importance, it is indispensable for both researchers in software or embedded security and professionals in the automotive industry.

Download or read book Making Embedded Systems written by Elecia White and published by "O'Reilly Media, Inc.". This book was released on 2011-10-25 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interested in developing embedded systems? Since they donâ??t tolerate inefficiency, these systems require a disciplined approach to programming. This easy-to-read guide helps you cultivate a host of good development practices, based on classic software design patterns and new patterns unique to embedded programming. Learn how to build system architecture for processors, not operating systems, and discover specific techniques for dealing with hardware difficulties and manufacturing requirements. Written by an expert whoâ??s created embedded systems ranging from urban surveillance and DNA scanners to childrenâ??s toys, this book is ideal for intermediate and experienced programmers, no matter what platform you use. Optimize your system to reduce cost and increase performance Develop an architecture that makes your software robust in resource-constrained environments Explore sensors, motors, and other I/O devices Do more with less: reduce RAM consumption, code space, processor cycles, and power consumption Learn how to update embedded code directly in the processor Discover how to implement complex mathematics on small processors Understand what interviewers look for when you apply for an embedded systems job "Making Embedded Systems is the book for a C programmer who wants to enter the fun (and lucrative) world of embedded systems. Itâ??s very well writtenâ??entertaining, evenâ??and filled with clear illustrations." â??Jack Ganssle, author and embedded system expert.

Download or read book Software Engineering for Embedded Systems written by Robert Oshana and published by Newnes. This book was released on 2013-04-01 with total page 1201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Expert Guide gives you the techniques and technologies in software engineering to optimally design and implement your embedded system. Written by experts with a solutions focus, this encyclopedic reference gives you an indispensable aid to tackling the day-to-day problems when using software engineering methods to develop your embedded systems. With this book you will learn: The principles of good architecture for an embedded system Design practices to help make your embedded project successful Details on principles that are often a part of embedded systems, including digital signal processing, safety-critical principles, and development processes Techniques for setting up a performance engineering strategy for your embedded system software How to develop user interfaces for embedded systems Strategies for testing and deploying your embedded system, and ensuring quality development processes Practical techniques for optimizing embedded software for performance, memory, and power Advanced guidelines for developing multicore software for embedded systems How to develop embedded software for networking, storage, and automotive segments How to manage the embedded development process Includes contributions from: Frank Schirrmeister, Shelly Gretlein, Bruce Douglass, Erich Styger, Gary Stringham, Jean Labrosse, Jim Trudeau, Mike Brogioli, Mark Pitchford, Catalin Dan Udma, Markus Levy, Pete Wilson, Whit Waldo, Inga Harris, Xinxin Yang, Srinivasa Addepalli, Andrew McKay, Mark Kraeling and Robert Oshana. Road map of key problems/issues and references to their solution in the text Review of core methods in the context of how to apply them Examples demonstrating timeless implementation details Short and to- the- point case studies show how key ideas can be implemented, the rationale for choices made, and design guidelines and trade-offs

Download or read book Introduction to Embedded Systems Second Edition written by Edward Ashford Lee and published by MIT Press. This book was released on 2017-01-06 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the engineering principles of embedded systems, with a focus on modeling, design, and analysis of cyber-physical systems. The most visible use of computers and software is processing information for human consumption. The vast majority of computers in use, however, are much less visible. They run the engine, brakes, seatbelts, airbag, and audio system in your car. They digitally encode your voice and construct a radio signal to send it from your cell phone to a base station. They command robots on a factory floor, power generation in a power plant, processes in a chemical plant, and traffic lights in a city. These less visible computers are called embedded systems, and the software they run is called embedded software. The principal challenges in designing and analyzing embedded systems stem from their interaction with physical processes. This book takes a cyber-physical approach to embedded systems, introducing the engineering concepts underlying embedded systems as a technology and as a subject of study. The focus is on modeling, design, and analysis of cyber-physical systems, which integrate computation, networking, and physical processes. The second edition offers two new chapters, several new exercises, and other improvements. The book can be used as a textbook at the advanced undergraduate or introductory graduate level and as a professional reference for practicing engineers and computer scientists. Readers should have some familiarity with machine structures, computer programming, basic discrete mathematics and algorithms, and signals and systems.