Download or read book Automation and Robotics in Construction XI written by Alan Chamberlain and published by Newnes. This book was released on 2012-12-02 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sourced from international experts, this book presents papers dealing with a wide range of soft and hard research issues at various stages of development in the field. Some cover entirely new ground, whilst others reflect progress on the sometimes frustrating path to truly robust technology. Of particular interest are contributions discussing issues of exploitation and commercialisation, the integration of end products within the design and construction processes incorporating information technology (IT) and the impact of the emerging technology on the culture and organisation of the construction industry. A mark of growing maturity is apparent in the coverage of health and safety and related social issues. This is complemented by a clear commitment to the consideration of human factors and the environment. It is hoped that by promoting a wider debate on the matters of future technology and its horizons, on the identification of what industry needs from the research and development community and on building effective partnerships between academia, industry and government, the publication not only addresses the practical commercial obligation to seek robust solutions for today's problems, but will stimulate research for the years to come.
Download or read book Automation and Robotics in Construction XI written by Denis A. Chamberlain and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Sourced from international experts, this book presents papers dealing with a wide range of soft and hard research issues at various stages of development in the field. Some cover entirely new ground, whilst others reflect progress on the sometimes frustrating path to truly robust technology. Of particular interest are contributions discussing issues of exploitation and commercialisation, the integration of end products within the design and construction processes incorporating information technology (IT) and the impact of the emerging technology on the culture and organisation of the construction industry. A mark of growing maturity is apparent in the coverage of health and safety and related social issues. This is complemented by a clear commitment to the consideration of human factors and the environment. It is hoped that by promoting a wider debate on the matters of future technology and its horizons, on the identification of what industry needs from the research and development community and on building effective partnerships between academia, industry and government, the publication not only addresses the practical commercial obligation to seek robust solutions for today's problems, but will stimulate research for the years to come.
Download or read book Robotics and Automation in Construction written by Carlos Balaguer and published by BoD – Books on Demand. This book was released on 2008-10-01 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses several issues related to the introduction of automaton and robotics in the construction industry in a collection of 23 chapters. The chapters are grouped in 3 main sections according to the theme or the type of technology they treat. Section I is dedicated to describe and analyse the main research challenges of Robotics and Automation in Construction (RAC). The second section consists of 12 chapters and is dedicated to the technologies and new developments employed to automate processes in the construction industry. Among these we have examples of ICT technologies used for purposes such as construction visualisation systems, added value management systems, construction materials and elements tracking using multiple IDs devices. This section also deals with Sensorial Systems and software used in the construction to improve the performances of machines such as cranes, and in improving Human-Machine Interfaces (MMI). Authors adopted Mixed and Augmented Reality in the MMI to ease the construction operations. Section III is dedicated to describe case studies of RAC and comprises 8 chapters. Among the eight chapters the section presents a robotic excavator and a semi-automated façade cleaning system. The section also presents work dedicated to enhancing the force of the workers in construction through the use of Robotic-powered exoskeletons and body joint-adapted assistive units, which allow the handling of greater loads.
Download or read book Design and Construction written by Rick Best and published by Routledge. This book was released on 2007-06-01 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design and construction of buildings is a lengthy and expensive process, and those who commission buildings are continually looking for ways to improve the efficiency of the process. In this book, the second in the Building in Value series, a broad range of topics related to the processes of design and construction are explored by an international group of experts. The overall aim of the book is to look at ways that clients can improve the value for money outcomes of their decisions to construct buildings. The book is aimed at students studying in many areas related to the construction industry including architecture, construction management, civil engineering and quantity surveying, and should also be of interest to many in the industry including project managers, property developers, building contractors and cost engineers.
Download or read book Robot Oriented Design written by Thomas Bock and published by Cambridge University Press. This book was released on 2015-05-05 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cambridge Handbooks on Construction Robotics series focuses on the implementation of automation and robot technology to renew the construction industry and to arrest its declining productivity. The series is intended to give professionals, researchers, lecturers, and students basic conceptual and technical skills and implementation strategies to manage, research, or teach the implementation of advanced automation and robot-technology-based processes and technologies in construction. Currently, the implementation of modern developments in product structures (modularity and design for manufacturing), organizational strategies (just in time, just in sequence, and pulling production), and informational aspects (computer-aided design/manufacturing or computer-integrated manufacturing) are lagging because of the lack of modern integrated machine technology in construction. The Cambridge Handbooks on Construction Robotics books discuss progress in robot systems theory and demonstrate their integration using real systematic applications and projections for off-site as well as on-site building production. Robot-Oriented Design and Management introduces the design, innovation, and management methodologies that are key to the realization and implementation of the advanced concepts and technologies presented in the subsequent volumes. This book describes the efficient deployment of advanced construction and building technology. It is concerned with the coadaptation of construction products, processes, organization, and management, and with automated/robotic technology, so that the implementation of modern technology becomes easier and more efficient. It is also concerned with technology and innovation management methodologies and the generation of life cycle-oriented views related to the use of advanced technologies in construction.
Download or read book Automation and Robotics in Construction X written by George H. Watson and published by Elsevier Publishing Company. This book was released on 1993 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent accomplishments and visions for the future in the practical applications of construction robots and automated systems are reviewed in the 71 papers in this volume. The experience of specialists is brought together on a wide range of activities that employ common analytical and experimental methods in their estimation of automated construction planning. The results of the meeting are of world-wide interest, and will help to stimulate future research and analysis in this field.
Download or read book Site Automation written by Thomas Bock and published by Cambridge University Press. This book was released on 2016-04-18 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Site Automation extends the new technology of robotics in building-component manufacturing and construction to on-site structured environments and on-site automated factories.
Download or read book Construction Robots written by Thomas Bock and published by Cambridge University Press. This book was released on 2016-10-24 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining architectural theory with the latest trends in manufacturing technology, this volume shows how Single-Task Construction Robots (STCRs) can improve productivity in the construction industry. It presents two hundred types of STCRs and includes numerous real-world case studies, making it an excellent resource for professional engineers and researchers.
Download or read book Automation and Robotics in the Architecture Engineering and Construction Industry written by Houtan Jebelli and published by Springer Nature. This book was released on 2022-01-03 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automation and Robotics in the Architecture, Engineering, and Construction Industry provides distinct and unified insight into current and future construction robotics, offering readers a comprehensive perspective for constructing a road map and illuminating improvements for a successful transition towards construction robotization. The book covers the fundamentals and applications of robotics, autonomous vehicles, and human-perceptive machines at construction sites. Through theoretical and experimental analyses, it examines the potential of robotics and automated systems for current and future fieldwork operations and identifies the factors that determine their implementation pace, adoption scale, and ubiquity throughout the industry. The book evaluates the technical, societal, and economic aspects of adopting robots in construction, both as standalone and collaborative systems, which in return can afford the opportunity to investigate these AI-enabled machines more systematically.
Download or read book InCIEC 2013 written by Rohana Hassan and published by Springer Science & Business Media. This book was released on 2014-01-09 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: The special focus of this proceeding is to cover the areas of infrastructure engineering and sustainability management. The state-of-the art information in infrastructure and sustainable issues in engineering covers earthquake, bioremediation, synergistic management, timber engineering, flood management and intelligent transport systems. It provides precise information with regards to innovative research development in construction materials and structures in addition to a compilation of interdisciplinary finding combining nano-materials and engineering.
Download or read book Robotics and Automation in Construction written by Carlos Balaguer and published by . This book was released on 2008 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses several issues related to the introduction of automaton and robotics in the construction industry in a collection of 23 chapters. The chapters are grouped in 3 main sections according to the theme or the type of technology they treat. Section I is dedicated to describe and analyse the main research challenges of Robotics and Automation in Construction (RAC). The second section consists of 12 chapters and is dedicated to the technologies and new developments employed to automate processes in the construction industry. Among these we have examples of ICT technologies used for purposes such as construction visualisation systems, added value management systems, construction materials and elements tracking using multiple IDs devices. This section also deals with Sensorial Systems and software used in the construction to improve the performances of machines such as cranes, and in improving Human-Machine Interfaces (MMI). Authors adopted Mixed and Augmented Reality in the MMI to ease the construction operations. Section III is dedicated to describe case studies of RAC and comprises 8 chapters. Among the eight chapters the section presents a robotic excavator and a semi-automated façade cleaning system. The section also presents work dedicated to enhancing the force of the workers in construction through the use of Robotic-powered exoskeletons and body joint-adapted assistive units, which allow the handling of greater loads.
Download or read book Intelligent Autonomous Systems written by Ulrich Rembold and published by IOS Press. This book was released on 1995 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents the proceedings of a conference on intelligent autonomous systems. Papers contribute solutions to the task of designing autonomous systems that are capable of operating independently of a human in partially structured and unstructured environments. For specific application, these systems should also learn from their actions in order to improve and optimize planning and execution of new tasks.
Download or read book Robotic Industrialization written by Thomas Bock and published by Cambridge University Press. This book was released on 2015-08-10 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this volume, concepts, technologies and developments in the field of building-component manufacturing - based on concrete, brick, wood and steel as building materials and on large-scale prefabrication, delivering complex, customized components and products - are introduced and discussed. Robotic industrialization refers to the transformation of parts and low-level components into higher-level components, modules and finally building systems by highly mechanized, automated, or robot-supported industrial settings in structured off-site environments. Components and modules are open building systems (in modular building product structures) that are delivered by suppliers to original equipment manufacturers such as, for example, large-scale prefabrication companies or automated/robotic on-site factories. In particular, innovative large-scale prefabrication companies have altered the building structures, manufacturing processes, and organizational structures significantly to be able to assemble in their factories high-level components and modules from Tier-1 suppliers into customized buildings by heavily utilizing robotic technology in combination with automated logistics and production lines.
Download or read book Robotic Fabrication in Architecture Art and Design 2016 written by Dagmar Reinhardt and published by Springer. This book was released on 2016-02-03 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the proceedings of Rob/Arch 2016, the third international conference on robotic fabrication in architecture, art, and design. The work contains a wide range of contemporary topics, from methodologies for incorporating dynamic material feedback into existing fabrication processes, to novel interfaces for robotic programming, to new processes for large-scale automated construction. The latent argument behind this research is that the term ‘file-to-factory’ must not be a reductive celebration of expediency but instead a perpetual challenge to increase the quality of feedback between design, matter, and making.
Download or read book EG ICE 2021 Workshop on Intelligent Computing in Engineering written by Abualdenien, Jimmy and published by Universitätsverlag der TU Berlin. This book was released on 2021-08-06 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 28th EG-ICE International Workshop 2021 brings together international experts working at the interface between advanced computing and modern engineering challenges. Many engineering tasks require open-world resolutions to support multi-actor collaboration, coping with approximate models, providing effective engineer-computer interaction, search in multi-dimensional solution spaces, accommodating uncertainty, including specialist domain knowledge, performing sensor-data interpretation and dealing with incomplete knowledge. While results from computer science provide much initial support for resolution, adaptation is unavoidable and most importantly, feedback from addressing engineering challenges drives fundamental computer-science research. Competence and knowledge transfer goes both ways. Der 28. Internationale EG-ICE Workshop 2021 bringt internationale Experten zusammen, die an der Schnittstelle zwischen fortgeschrittener Datenverarbeitung und modernen technischen Herausforderungen arbeiten. Viele ingenieurwissenschaftliche Aufgaben erfordern Open-World-Resolutionen, um die Zusammenarbeit mehrerer Akteure zu unterstützen, mit approximativen Modellen umzugehen, eine effektive Interaktion zwischen Ingenieur und Computer zu ermöglichen, in mehrdimensionalen Lösungsräumen zu suchen, Unsicherheiten zu berücksichtigen, einschließlich fachspezifischen Domänenwissens, Sensordateninterpretation durchzuführen und mit unvollständigem Wissen umzugehen. Während die Ergebnisse aus der Informatik anfänglich viel Unterstützung für die Lösung bieten, ist eine Anpassung unvermeidlich, und am wichtigsten ist, dass das Feedback aus der Bewältigung technischer Herausforderungen die computer-wissenschaftliche Grundlagenforschung vorantreibt. Kompetenz und Wissenstransfer gehen in beide Richtungen.
Download or read book Algorithmic Foundations of Robotics XIII written by Marco Morales and published by Springer Nature. This book was released on 2020-05-07 with total page 959 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the outcomes of the thirteenth Workshop on the Algorithmic Foundations of Robotics (WAFR), the premier event for showcasing cutting-edge research on algorithmic robotics. The latest WAFR, held at Universidad Politécnica de Yucatán in Mérida, México on December 9–11, 2018, continued this tradition. This book contains fifty-four papers presented at WAFR, which highlight the latest research on fundamental algorithmic robotics (e.g., planning, learning, navigation, control, manipulation, optimality, completeness, and complexity) demonstrated through several applications involving multi-robot systems, perception, and contact manipulation. Addressing a diverse range of topics in papers prepared by expert contributors, the book reflects the state of the art and outlines future directions in the field of algorithmic robotics.
Download or read book Construction Robots written by Leslie Cousineau and published by ASCE Publications. This book was released on 1998-01-01 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents Japan"s achievements in the development and application of over 100 construction robots and five automated systems. The Japanese have progressed far beyond the U.S. in these new technologies, which are already having a revolutionary impact on Japanese architecture. The impact of robotics has already begun to show measured improvements in quality, productivity, and safety in construction.
