Download or read book Automatic Tool path Generation for Machining Sculptured Surfaces Using Optimizations Based on Thin layer Cutting and High speed Machining Concepts written by Dennis Tang and published by . This book was released on 1994 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 39 (thesis year 1994) a total of 13,953 thesis titles from 21 Canadian and 159 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 39 reports theses submitted in 1994, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.

Download or read book Machine Tools for High Performance Machining written by Norberto Lopez de Lacalle and published by Springer Science & Business Media. This book was released on 2008-10-01 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machine tools are the main production factor for many industrial applications in many important sectors. Recent developments in new motion devices and numerical control have lead to considerable technological improvements in machine tools. The use of five-axis machining centers has also spread, resulting in reductions in set-up and lead times. As a consequence, feed rates, cutting speed and chip section increased, whilst accuracy and precision have improved as well. Additionally, new cutting tools have been developed, combining tough substrates, optimal geometries and wear resistant coatings. “Machine Tools for High Performance Machining” describes in depth several aspects of machine structures, machine elements and control, and application. The basics, models and functions of each aspect are explained by experts from both academia and industry. Postgraduates, researchers and end users will all find this book an essential reference.

Download or read book Analysis of Machining and Machine Tools written by Steven Liang and published by Springer. This book was released on 2015-12-29 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the fundamental, analytical, and quantitative knowledge of machining process planning and optimization based on advanced and practical understanding of machinery, mechanics, accuracy, dynamics, monitoring techniques, and control strategies that they need to understanding machining and machine tools. It is written for first-year graduate students in mechanical engineering, and is also appropriate for use as a reference book by practicing engineers. It covers topics such as single and multiple point cutting processes; grinding processes; machine tool components, accuracy, and metrology; shear stress in cutting, cutting temperature and thermal analysis, and machine tool chatter. The second section of the book is devoted to “Non-Traditional Machining,” where readers can find chapters on electrical discharge machining, electrochemical machining, laser and electron beam machining, and biomedical machining. Examples of realistic problems that engineers are likely to face in the field are included, along with solutions and explanations that foster a didactic learning experience.

Download or read book Practical Milling written by Benjamin William Dedrick and published by . This book was released on 1924 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Design and Manufacturing Based on STEP written by Xun Xu and published by Springer Science & Business Media. This book was released on 2009-09-29 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and manufacturing is the essential element in any product development lifecycle. Industry vendors and users have been seeking a common language to be used for the entire product development lifecycle that can describe design, manufacturing and other data pertaining to the product. Many solutions were proposed, the most successful being the Stadndard for Exchange of Product model (STEP). STEP provides a mechanism that is capable of describing product data, independent from any particular system. The nature of this description makes it suitable not only for neutral file exchange, but also as a basis for implementing, sharing and archiving product databases. ISO 10303-AP203 is the first and perhaps the most successful AP developed to exchange design data between different CAD systems. Going from geometric data (as in AP203) to features (as in AP224) represents an important step towards having the right type of data in a STEP-based CAD/CAM system. Of particular significance is the publication of STEP-NC, as an extension of STEP to NC, utilising feature-based concepts for CNC machining purposes. The aim of this book is to provide a snapshot of the recent research outcomes and implementation cases in the field of design and manufacturing where STEP is used as the primary data representation protocol. The 20 chapters are contributed by authors from most of the top research teams in the world. These research teams are based in national research institutes, industries as well as universities.

Download or read book Handbook of High Speed Machining Technology written by Robert King and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: The United States now spends approximately $115 billion annually to perform its metal removal tasks using conventional machining technology. Of this total amount, about $14 billion is invested in the aerospace and associated industries. It becomes clear that metal removal technology is a very important candidate for rigorous investigation looking toward improvement of productivity within the manufacturing system. To aid in this endeavor, work has begun to establish a new scientific and technical base that will provide principles upon which manufacturing decisions may be based. One of the metal removal areas that has the potential for great economic advantages is high-speed machining and related technology. This text is concerned with discussions of ways in which high-speed machining systems can solve immediate problems of profiling, pocketing, slotting, sculpturing, facing, turning, drilling, and thin-walled sectioning. Benefits to many existing programs are provided by aiding in solving a current management production problem, that of efficiently removing large volumes of metal by chip removal. The injection of new high-rate metal removal techniques into conventional production procedures, which have remained basically unchanged for a century, presents a formidable systems problem, both technically and man agerially.The proper solution requires a sophisticated, difficult process whereby management-worker relationships are reassessed, age-old machine deSigns reevaluated, and a new vista of product/process planning and design admitted.

Download or read book Artificial Immune Systems A New Computational Intelligence Approach written by Leandro Nunes de Castro and published by Springer Science & Business Media. This book was released on 2002-09-23 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial Immune Systems (AIS) are adaptive systems inspired by the biological immune system and applied to problem solving. This book provides an accessible introduction that will be suitable for anyone who is beginning to study or work in this area. It gives a clear definition of an AIS, sets out the foundations of the topic (including basic algorithms), and analyses how the immune system relates to other biological systems and processes. No prior knowledge of immunology is needed - all the essential background information is covered in the introductory chapters. Key features of the book include: - A discussion of AIS in the context of Computational Intelligence; - Case studies in Autonomous Navigation, Computer Network Security, Job-Shop Scheduling and Data Analysis =B7 An extensive survey of applications; - A framework to help the reader design and understand AIS; - A web site with additional resources including pseudocodes for immune algorithms, and links to related sites. Written primarily for final year undergraduate and postgraduate students studying Artificial Intelligence, Evolutionary and Biologically Inspired Computing, this book will also be of interest to industrial and academic researchers working in related areas.

Download or read book Fused Deposition Modeling Based 3D Printing written by Harshit K. Dave and published by Springer Nature. This book was released on 2021-04-21 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers 3D printing activities by fused deposition modeling process. The two introductory chapters discuss the principle, types of machines and raw materials, process parameters, defects, design variations and simulation methods. Six chapters are devoted to experimental work related to process improvement, mechanical testing and characterization of the process, followed by three chapters on post-processing of 3D printed components and two chapters addressing sustainability concerns. Seven chapters discuss various applications including composites, external medical devices, drug delivery system, orthotic inserts, watertight components and 4D printing using FDM process. Finally, six chapters are dedicated to the study on modeling and optimization of FDM process using computational models, evolutionary algorithms, machine learning, metaheuristic approaches and optimization of layout and tool path.

Download or read book Artificial Intelligence A Systems Approach written by M. Tim Jones and published by Jones & Bartlett Learning. This book was released on 2008-12-26 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers students and AI programmers a new perspective on the study of artificial intelligence concepts. The essential topics and theory of AI are presented, but it also includes practical information on data input & reduction as well as data output (i.e., algorithm usage). Because traditional AI concepts such as pattern recognition, numerical optimization and data mining are now simply types of algorithms, a different approach is needed. This “sensor / algorithm / effecter” approach grounds the algorithms with an environment, helps students and AI practitioners to better understand them, and subsequently, how to apply them. The book has numerous up to date applications in game programming, intelligent agents, neural networks, artificial immune systems, and more. A CD-ROM with simulations, code, and figures accompanies the book.

Download or read book CAD CAM Abstracts written by and published by . This book was released on 1992 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Principles of Process Planning written by G. Halevi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process planning determines how a product is to be manufactured and is therefore a key element in the manufacturing process. It plays a major part in determining the cost of components and affects all factory activities, company competitiveness, production planning, production efficiency and product quality. It is a crucial link between design and manufacturing. There are several levels of process planning activities. Early in product engineering and development, process planning is responsible for determining the general method of production. The selected general method of production affects the design constraints. In the last stages of design, the designer has to consider ease of manufacturing in order for it to be economic. The part design data is transferred from engineering to manufacturing and process planners develop the detailed work package for manufacturing a part. Dimensions and tolerances are determined for each stage of processing of the workpiece. Process planning determines the sequence of operations and utilization of machine tools. Cutting tools, fixtures, gauges and other accessory tooling are also specified. Feeds, speeds and other parameters of the metal cutting and forming processes are determined.

Download or read book Advanced Numerical Methods to Optimize Cutting Operations of Five Axis Milling Machines written by Stanislav S. Makhanov and published by Springer Science & Business Media. This book was released on 2007-04-18 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new optimization algorithms designed to improve the efficiency of tool paths for five-axis NC machining of sculptured surfaces. The book covers both the structure of the SLAM problem in general and proposes a new extremely efficient approach. It can be used by undergraduate and graduate students and researchers in the field of NC machining and CAD/CAM as well as by corporate research groups for advanced optimization of cutting operations.

Download or read book Advanced Modeling and Optimization of Manufacturing Processes written by R. Venkata Rao and published by Springer Science & Business Media. This book was released on 2010-12-01 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Modeling and Optimization of Manufacturing Processes presents a comprehensive review of the latest international research and development trends in the modeling and optimization of manufacturing processes, with a focus on machining. It uses examples of various manufacturing processes to demonstrate advanced modeling and optimization techniques. Both basic and advanced concepts are presented for various manufacturing processes, mathematical models, traditional and non-traditional optimization techniques, and real case studies. The results of the application of the proposed methods are also covered and the book highlights the most useful modeling and optimization strategies for achieving best process performance. In addition to covering the advanced modeling, optimization and environmental aspects of machining processes, Advanced Modeling and Optimization of Manufacturing Processes also covers the latest technological advances, including rapid prototyping and tooling, micromachining, and nano-finishing. Advanced Modeling and Optimization of Manufacturing Processes is written for designers and manufacturing engineers who are responsible for the technical aspects of product realization, as it presents new models and optimization techniques to make their work easier, more efficient, and more effective. It is also a useful text for practitioners, researchers, and advanced students in mechanical, industrial, and manufacturing engineering.

Download or read book Theory and Design of CNC Systems written by Suk-Hwan Suh and published by Springer Science & Business Media. This book was released on 2008-08-22 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Numerical Control (CNC) controllers are high value-added products counting for over 30% of the price of machine tools. The development of CNC technology depends on the integration of technologies from many different industries, and requires strategic long-term support. “Theory and Design of CNC Systems” covers the elements of control, the design of control systems, and modern open-architecture control systems. Topics covered include Numerical Control Kernel (NCK) design of CNC, Programmable Logic Control (PLC), and the Man-Machine Interface (MMI), as well as the major modules for the development of conversational programming methods. The concepts and primary elements of STEP-NC are also introduced. A collaboration of several authors with considerable experience in CNC development, education, and research, this highly focused textbook on the principles and development technologies of CNC controllers can also be used as a guide for those working on CNC development in industry.

Download or read book Abrasive Technology written by Anna Rudawska and published by BoD – Books on Demand. This book was released on 2018-10-24 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject matter of this book is the information on the abrasive technology methods, the characteristics of the methods (for example, the technological parameters, tools, and machines), innovative methods, characteristics of surface structure and surface properties after this type of mechanical process, and application in various industrial branches and other technical and technological domains. Abrasive technology is very important, for example, in precision component manufacturing and nano-technology devices. The aim of this book is to present information on the characteristics and applications of abrasive technology, abrasive tools, tests, and also the innovative methods of this technology. This information enables scientists, engineers, and designers to ensure the soundness and integrity of the fabricated components and to develop new techniques effectively.

Download or read book Parallel Kinematics written by Xin-Jun Liu and published by Springer Science & Business Media. This book was released on 2013-08-15 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel Kinematics- Type, Kinematics, and Optimal Design presents the results of 15 year's research on parallel mechanisms and parallel kinematics machines. This book covers the systematic classification of parallel mechanisms (PMs) as well as providing a large number of mechanical architectures of PMs available for use in practical applications. It focuses on the kinematic design of parallel robots. One successful application of parallel mechanisms in the field of machine tools, which is also called parallel kinematics machines, has been the emerging trend in advanced machine tools. The book describes not only the main aspects and important topics in parallel kinematics, but also references novel concepts and approaches, i.e. type synthesis based on evolution, performance evaluation and optimization based on screw theory, singularity model taking into account motion and force transmissibility, and others. This book is intended for researchers, scientists, engineers and postgraduates or above with interests in robotics and advanced machine tools technology such as parallel kinematics machines (PKMs). Xinjun Liu and Jinsong Wang, professors, work at The Institute of Manufacturing Engineering, Department of Precision Instruments and Mechanology, Tsinghua University.