Download or read book Overview of Industrial Process Automation written by K.L.S. Sharma and published by Elsevier. This book was released on 2016-10-25 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overview of Industrial Process Automation, Second Edition, introduces the basics of philosophy, technology, terminology, and practices of modern automation systems through the presentation of updated examples, illustrations, case studies, and images. This updated edition adds new developments in the automation domain, and its reorganization of chapters and appendixes provides better continuity and seamless knowledge transfer. Manufacturing and chemical engineers involved in factory and process automation, and students studying industrial automation will find this book to be a great, comprehensive resource for further explanation and study. - Presents a ready made reference that introduces all aspects of automation technology in a single place with day-to-day examples - Provides a basic platform for the understanding of industry literature on automation products, systems, and solutions - Contains a guided tour of the subject without the requirement of any previous knowledge on automation - Includes new topics, such as factory and process automation, IT/OT Integration, ISA 95, Industry 4.0, IoT, etc., along with safety systems in process plants and machines

Download or read book Terminological Dictionary of Automatic Control Systems and Robotics written by Rihard Karba and published by Springer Nature. This book was released on 2024-01-02 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dictionary contains terms from the fields of automatic control, which includes mathematical modelling, simulation of dynamic systems, automation technology with its corresponding elements, and robotics. It also includes signal processing, information technologies and production technologies. The terminological dictionary is primarily aimed at experts and students who deal with control technology and dynamic systems in both technical and non-technical domains. To be able to use the dictionary, at least basic knowledge in this field is required. In the dictionary users will find concise terminological definitions. A concept may be designated by different terms; therefore, cross-references are used. The aim of the dictionary is to collect and unify – at least to an achievable extent – the terminology in the field of automatic control, dynamic systems and robotics.

Download or read book Automatic Control Mechatronics and Industrial Engineering written by Yigang He and published by CRC Press. This book was released on 2019-03-20 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering technology development and implementation play an important role in making the industry more sustainable in an increasingly competitive world. This book covers significant recent developments in both fundamental and applied research in the engineering field. Domains of application include, but are not limited to, Intelligent Control Systems and Optimization, Signal Processing, Sensors, Systems Modeling and Control, Robotics and Automation, Industrial and Electric Engineering, Production and Management. This book is an excellent reference work to get up to date with the latest research and developments in the fields of Automation, Mechatronics and Industrial Engineering. It aims to provide a platform for researchers and professionals in all relevant fields to gain new ideas and establish great achievements in scientific development.

Download or read book Collaborative Design and Planning for Digital Manufacturing written by Lihui Wang and published by Springer Science & Business Media. This book was released on 2009-01-27 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaborative design has attracted much attention in the research community in recent years. With increasingly decentralized manufacturing systems and processes, more collaborative approaches and systems are needed to support distributed manufacturing operations. "Collaborative Design and Planning for Digital Manufacturing" presents a focused collection of quality chapters on the state-of-the-art research efforts in the area of collaborative design and planning, as well as their practical applications towards digital manufacturing. "Collaborative Design and Planning for Digital Manufacturing" provides both a broad-based review of the key areas of research in digital manufacturing, and an in-depth treatment of particular methodologies and systems, from collaborative design to distributed planning, monitoring and control. Recent development and innovations in this area provide a pool of focused research efforts, relevant to a wide readership from academic researchers to practicing engineers.

Download or read book Automatic Control of Food Manufacturing Processes written by I. McFarlane and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the ten years since the first edition of this book appeared there have been significant developments in food process engineering, notably in biotechnology and membrane application. Advances have been made in the use of sensors for process control, and the growth of information technology and on-line computer applications continues apace. In addition, plant investment decisions are increasingly determined by quality assurance considerations and have to incorporate a greater emphasis on health and safety issues. The content of this edition has been rearranged to include descriptions of recent developments and to reflect the influence of new technology on the control and operations of automated plant. Original examples have been retained where relevant and these, together with many new illustrations, provide a comprehensive guide to good practice.

Download or read book Advances in Automatic Control written by Mihail Voicu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the academic year 2002-2003, the Faculty of Automatic Control and Computer Engineering of Ia~i (Romania), and its Departments of Automatic Control and Industrial Informatics and of Computer Engineering respectively, celebrated 25 years from the establishment of the specialization named Automatic Control and Computer Engineering within the framework of the former Faculty of Electrical Engineering of Ia~i, and, at the same time, 40 years since the first courses on Automatic Control and Computers respectively, were introduced in the curricula of the former specializations of Electromechanical Engineering and Electrical Power Engineering at the already mentioned Faculty of Electrical Engineering. The reader interested to know some important moments ofour evolution during the last five decades is invited to see the Addendum ofthis volume, where a short history is presented. And, to highlight once more the nice coincidences, it must be noted here that in 2003 our Technical University "Gheorghe Asachi" of Ia~i celebrated 190 years from the emergence of the first cadastral engineering degree course in Ia~i (thanks to the endeavor ofGheorghe Asachi), which is today considered to be the beginningofthe engineering higher education in Romania. Generally speaking, an anniversary is a celebration meant to mark special events ofthe past, with festivities to be performed solemnly and publicly according to a specific ritual.

Download or read book Automating Manufacturing Systems with Plcs written by Hugh Jack and published by Lulu.com. This book was released on 2009-08-27 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in depth examination of manufacturing control systems using structured design methods. Topics include ladder logic and other IEC 61131 standards, wiring, communication, analog IO, structured programming, and communications.Allen Bradley PLCs are used extensively through the book, but the formal design methods are applicable to most other PLC brands.A full version of the book and other materials are available on-line at http://engineeronadisk.com

Download or read book Forces of Production written by David Noble and published by Routledge. This book was released on 2017-07-12 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the design and implementation of computer-based automatic machine tools, David F. Noble challenges the idea that technology has a life of its own. Technology has been both a convenient scapegoat and a universal solution, serving to disarm critics, divert attention, depoliticize debate, and dismiss discussion of the fundamental antagonisms and inequalities that continue to beset America. This provocative study of the postwar automation of the American metal-working industry—the heart of a modern industrial economy—explains how dominant institutions like the great corporations, the universities, and the military, along with the ideology of modern engineering shape, the development of technology. Noble shows how the system of "numerical control," perfected at the Massachusetts Institute of Technology (MIT) and put into general industrial use, was chosen over competing systems for reasons other than the technical and economic superiority typically advanced by its promoters. Numerical control took shape at an MIT laboratory rather than in a manufacturing setting, and a market for the new technology was created, not by cost-minded producers, but instead by the U. S. Air Force. Competing methods, equally promising, were rejected because they left control of production in the hands of skilled workers, rather than in those of management or programmers. Noble demonstrates that engineering design is influenced by political, economic, managerial, and sociological considerations, while the deployment of equipment—illustrated by a detailed case history of a large General Electric plant in Massachusetts—can become entangled with such matters as labor classification, shop organization, managerial responsibility, and patterns of authority. In its examination of technology as a human, social process, Forces of Production is a path-breaking contribution to the understanding of this phenomenon in American society.

Download or read book Advanced Control Systems written by Yuriy P. Kondratenko and published by CRC Press. This book was released on 2022-09-01 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Control Systems: Theory and Applications provides an overview of advanced research lines in control systems as well as in design, development and implementation methodologies for perspective control systems and their components in different areas of industrial and special applications. It consists of extended versions of the selected papers presented at the XXV International Conference on Automatic Control “Automatics 2018” (September 18-19, 2018, Lviv, Ukraine) which is the main Ukrainian Control Conference organized by Ukrainian Association on Automatic Control (National member organization of IFAC) and Lviv National University “Lvivska Politechnica”. More than 100 papers were presented at the conference with topics including: mathematical problems of control, optimization and game theory; control and identification under uncertainty; automated control of technical, technological and biotechnical objects; controlling the aerospace craft, marine vessels and other moving objects; intelligent control and information processing; mechatronics and robotics; information measuring technologies in automation; automation and IT training of personnel; the Internet of things and the latest technologies. The book is divided into two main parts, the first concerning theory (7 chapters) and the second concerning applications (7 chapters) of advanced control systems. The first part “Advances in Theoretical Research on Automatic Control” consists of theoretical research results which deal with descriptor control impulsive delay systems, motion control in condition of conflict, inverse dynamic models, invariant relations in optimal control, robust adaptive control, bio-inspired algorithms, optimization of fuzzy control systems, and extremal routing problem with constraints and complicated cost functions. The second part “Advances in Control Systems Applications” is based on the chapters which consider different aspects of practical implementation of advanced control systems, in particular, special cases in determining the spacecraft position and attitude using computer vision system, the spacecraft orientation by information from a system of stellar sensors, control synthesis of rotational and spatial spacecraft motion at approaching stage of docking, intelligent algorithms for the automation of complex biotechnical objects, an automatic control system for the slow pyrolysis of organic substances with variable composition, simulation complex of hierarchical systems based on the foresight and cognitive modelling, and advanced identification of impulse processes in cognitive maps. The chapters have been structured to provide an easy-to-follow introduction to the topics that are addressed, including the most relevant references, so that anyone interested in this field can get started in the area. This book may be useful for researchers and students who are interesting in advanced control systems.

Download or read book Advanced Information Processing in Automatic Control AIPAC 89 written by R. Husson and published by Elsevier. This book was released on 2014-05-23 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information Processing is a key area of research and development and the symposium presented state-of-the-art reports on some of the areas which are of relevance in automatic control: fault diagnosis and system reliability. Papers also covered the role of expert systems and other knowledge based systems, which are needed, to cope with the vast quantities of data generated by large scale systems. This volume should be considered essential reading for anyone involved in this rapidly developing area.

Download or read book The Digital Shopfloor Industrial Automation in the Industry 4 0 Era written by John Soldatos and published by CRC Press. This book was released on 2022-09-01 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today’s competitive global environment, manufacturers are offered with unprecedented opportunities to build hyper-efficient and highly flexible plants, towards meeting variable market demand, while at the same time supporting new production models such as make-to-order (MTO), configure-to-order (CTO) and engineer-to-order (ETO). During the last couple of years, the digital transformation of industrial processes is propelled by the emergence and rise of the fourth industrial revolution (Industry4.0). The latter is based on the extensive deployment of Cyber-Physical Production Systems (CPPS) and Industrial Internet of Things (IIoT) technologies in the manufacturing shopfloor, as well as on the seamless and timely exchange of digital information across supply chain participants. The benefits of Industry 4.0 have been already proven in the scope of pilot and production deployments in a number of different use cases including flexibility in automation, predictive maintenance, zero defect manufacturing and more. Despite early implementations and proof-of-concepts, CPPS/IIoT deployments are still in their infancy for a number of reasons, including:• Manufacturers’ poor awareness about digital manufacturing solutions and their business value potential, as well as the lack of relevant internal CPPS/IIoT knowledge.• The high costs that are associated with the deployment, maintenance and operation of CPPS systems in the manufacturing shopfloors, which are particularly challenging in the case of SME (Small Medium Enterprises) manufacturers that lack the equity capital needed to invest in Industry 4.0.• The time needed to implement CPPS/IIoT and the lack of a smooth and proven migration path from existing OT solutions.• The uncertainty over the business benefits and impacts of IIoT and CPPS technologies, including the lack of proven methods for the techno-economic evaluation of Industry4.0 systems. • Manufacturers’ increased reliance on external integrators, consultants and vendors. • The absence of a well-developed value chain needed to sustain the acceptance of these new technologies for digital automation.In order to alleviate these challenges, three European Commission funded projects (namely H2020 FAR-EDGE (http://www.far-edge.eu/), H2020 DAEDALUS (http://daedalus.iec61499.eu) and H2020 AUTOWARE (http://www.autoware-eu.org/)) have recently joined forces towards a “Digital Shopfloor Alliance”. The Alliance aims at providing leading edge and standards based digital automation solutions, along with guidelines and blueprints for their effective deployment, validation and evaluation. The present book provides a comprehensive description of some of the most representative solutions that offered by these three projects, along with the ways these solutions can be combined in order to achieve multiplier effects and maximize the benefits of their use. The presented solutions include standards-based digital automation solutions, following different deployment paradigms, such as cloud and edge computing systems. Moreover, they also comprise a rich set of digital simulation solutions, which are explored in conjunction with the H2020 MAYA project (http://www.maya-euproject.com/). The latter facilitate the testing and evaluation of what-if scenarios at low risk and cost, but also without disrupting shopfloor operations. As already outlined, beyond leading edge scientific and technological development solutions, the book comprises a rich set of complementary assets that are indispensable to the successful adoption of IIoT/CPPS in the shopfloor. The book is structured in three parts as follows: • The first part of the book is devoted to digital automation platforms. Following an introduction to Industry 4.0 in general and digital automation platforms in particular, this part presents the digital automation platforms of the FAR-EDGE, AUTOWARE and DAEDALUS projects. • The second part of the book focuses on the presentation of digital simulation and digital twins’ functionalities. These include information about the models that underpin digital twins, as well as the simulators that enable experimentation with these processes over these digital models. • The third part of the book provides information about complementary assets and supporting services that boost the adoption of digital automation functionalities in the Industry4.0 era. Training services, migration services and ecosystem building services are discussed based on the results of the three projects of the Digital Shopfloor Alliance. The target audience of the book includes:• Researchers in the areas of Digital Manufacturing and more specifically in the areas of digital automation and simulation, who wish to be updated about latest Industry4.0 developments in these areas.• Manufacturers, with an interest in the next generation of digital automation solutions based on Cyber-Physical systems.• Practitioners and providers of Industrial IoT solutions, which are interested in the implementation of use cases in automation, simulation and supply chain management.• Managers wishing to understand technologies and solutions that underpin Industry4.0, along with representative applications in the shopfloor and across the supply chain.

Download or read book Site Reliability Engineering written by Niall Richard Murphy and published by "O'Reilly Media, Inc.". This book was released on 2016-03-23 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The overwhelming majority of a software system’s lifespan is spent in use, not in design or implementation. So, why does conventional wisdom insist that software engineers focus primarily on the design and development of large-scale computing systems? In this collection of essays and articles, key members of Google’s Site Reliability Team explain how and why their commitment to the entire lifecycle has enabled the company to successfully build, deploy, monitor, and maintain some of the largest software systems in the world. You’ll learn the principles and practices that enable Google engineers to make systems more scalable, reliable, and efficient—lessons directly applicable to your organization. This book is divided into four sections: Introduction—Learn what site reliability engineering is and why it differs from conventional IT industry practices Principles—Examine the patterns, behaviors, and areas of concern that influence the work of a site reliability engineer (SRE) Practices—Understand the theory and practice of an SRE’s day-to-day work: building and operating large distributed computing systems Management—Explore Google's best practices for training, communication, and meetings that your organization can use

Download or read book Control and Dynamic Systems V47 Manufacturing and Automation Systems Techniques and Technologies written by C.T. Leonides and published by Elsevier. This book was released on 2012-12-02 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control and Dynamic Systems: Advances in Theory and Applications, Volume 47: Manufacturing and Automation Systems: Techniques and Technologies, Part 3 of 5 deals with techniques and technologies in manufacturing and automation systems. This book discusses techniques in modeling and control policies for production networks; effective planning and control of day-to-day operations; evaluation of automated manufacturing systems; the use of Petri Nets in modeling, control and performance analysis of automated manufacturing systems; and concurrent engineering and evaluation of concurrency in engineering design. The final chapter discusses the algorithm for solving allocation problems. This book will provide a uniquely significant reference source for practitioners in the field who want a comprehensive source of techniques with significant applied implications.

Download or read book Springer Handbook of Automation written by Shimon Y. Nof and published by Springer Nature. This book was released on 2023-06-16 with total page 1533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook incorporates new developments in automation. It also presents a widespread and well-structured conglomeration of new emerging application areas, such as medical systems and health, transportation, security and maintenance, service, construction and retail as well as production or logistics. The handbook is not only an ideal resource for automation experts but also for people new to this expanding field.

Download or read book Kaikaku written by Norman Bodek and published by PCS Inc.. This book was released on 2004 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foreword. . . Foreword. . Ch. 1. The journey begins. 5. Ch. 2. Introducing Dr. Shigeo Shingo. 15. Ch. 3. Taichi Ohno. 27. Ch. 4. Defining waste. 39. Ch. 5. Dr. Shingo asking five whys at Granville Phillips. 45. Ch. 6. My first trip to Japan : a thriller. 49. Ch. 7. Discovering Shingo : a magic moment. 63. Ch. 8. The lobster feast and the first changeover by Dr. Shingo. 71. Ch. 9. The study mission process. 85. Ch. 10. SMED - quick changeovers - the heart of JIT. 93. Ch. 11. My mental transformation : there are 'gems' scattered all over Japan. 103. Ch. 12. Developing an understanding of Japan. 121. Ch. 13. Factory tours : a feast for the eyes. 127. Ch. 14. The Gemba walk. 137. Ch. 15. 5 S. 143. Ch. 16. Discovering books in Japan. 147. Ch. 17. Fire the quality manager!. 155. Ch. 18. The best factory in the world. 161. Ch. 19. Getting to know Dr. Shingo. 171. Ch. 20. The birth of the Kaizen Blitz. 177. Ch. 21. Finding books and meeting Kazuhiro Uchiyama. 187. Ch. 22. Shingo to teacher. 193. Ch. 23. Never take no for an answer. 197. Ch. 24. Introduction to TPM - another billion dollar idea. 201. Ch. 25. Shigehiro Nakamura. 213. Ch. 26. Kaoru Ishikawa. 227. Ch. 27. Iwao Kobayashi - 20 keys. 231. Ch. 28. Union of Japanese scientists and engineers (JUSE). 235. Ch. 29. Dr. W. Edwards deming. 237. Ch. 30. The impact of Dr. Joseph Juran. 251. Ch. 31. Life time employment system. 253. Ch. 32. Quick and easy Kaizen. 257. Ch. 33. A gallery of great geniuses. 277. Ch. 34. Professor Louis E. Davis and socio-technical systems. 295. Ch. 35. Failure to change is a vice!. 301. Ch. 36. Summary. 305. Ch. 37. Gary Convis - President Toyota (TMMK). 307. Ch. 38. Gary Smuda - technicolor corporation. 319. Ch. 39. Professor Doc - Robert Hall. 329. Ch. 40. Don Dewar - President QCI International. 341. Ch. 41. Richard Schonberger. 345. Ch. 42. Vision statements. 355. . Lean terms. 361.

Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.

Download or read book Soviet Union written by and published by . This book was released on 1965 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: