Download or read book Automated Impact Response Sounding for Accelerated Concrete Bridge Deck Inspection written by Jacob Lynn Larsen and published by . This book was released on 2018 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrastructure deterioration is an international problem requiring significant attention. One particular manifestation of this deterioration is the occurrence of sub-surface cracking (delaminations) in reinforced concrete bridge decks. Of many techniques available for inspection, air-coupled impact-echo testing, or sounding, is a non-destructive evaluation technique to determine the presence and location of delaminations based upon the acoustic response of a bridge deck when struck by an impactor. In this work, two automated air-coupled impact echo sounding devices were designed and constructed. Each device included fast and repeatable impactors, moving platforms for traveling across a bridge deck, microphones for air-coupled sensing, distance measurement instruments for keeping track of impact locations, and signal processing modules. First, a single-channel automated sounding device was constructed, followed by a multi channel system that was designed and built from the findings of the single-channel apparatus. The multi channel device performed a delamination inspection in the same manner as the single-channel device but could complete an inspection of an entire traffic lane in one pass. Each device was tested on at least one concrete bridge deck and the delamination maps produced by the devices were compared with maps generated from a traditional chain-drag sounding inspection. The comparison between the two inspection approaches yielded high correlations for bridge deck delamination percentages. Testing with the two devices was more than seven and thirty times faster, respectively, than typical manual sounding procedures. This work demonstrates a technological advance in which sounding can be performed in a manner that makes complete bridge deck scanning for delaminations rapid, safe, and practical.
Download or read book Nondestructive Testing to Identify Concrete Bridge Deck Deterioration written by and published by Transportation Research Board. This book was released on 2013 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: " TRB's second Strategic Highway Research Program (SHRP 2) Report S2-R06A-RR-1: Nondestructive Testing to Identify Concrete Bridge Deck Deterioration identifies nondestructive testing technologies for detecting and characterizing common forms of deterioration in concrete bridge decks.The report also documents the validation of promising technologies, and grades and ranks the technologies based on results of the validations.The main product of this project will be an electronic repository for practitioners, known as the NDToolbox, which will provide information regarding recommended technologies for the detection of a particular deterioration. " -- publisher's description.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1989 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1976 with total page 1004 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Field Inspection of In service FRP Bridge Decks written by Niket M. Telang and published by Transportation Research Board. This book was released on 2006 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Inspection and Monitoring Techniques for Bridges and Civil Structures written by Gongkang Fu and published by CRC Press. This book was released on 2005-11-29 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses techniques that require physical measurement for inspection, and/or monitoring of structures.
Download or read book Popular Science written by and published by . This book was released on 2004-12 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Popular Science gives our readers the information and tools to improve their technology and their world. The core belief that Popular Science and our readers share: The future is going to be better, and science and technology are the driving forces that will help make it better.
Download or read book Engineering for Structural Stability in Bridge Construction written by Federal Highway Federal Highway Administration and published by . This book was released on 2020-07-19 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual is intended to serve as a reference. It will provide technical information which will enable Manual users to perform the following activities:Describe typical erection practices for girder bridge superstructures and recognize critical construction stagesDiscuss typical practices for evaluating structural stability of girder bridge superstructures during early stages of erection and throughout bridge constructionExplain the basic concepts of stability and why it is important in bridge erection* Explain common techniques for performing advanced stability analysis along with their advantages and limitationsDescribe how differing construction sequences effect superstructure stabilityBe able to select appropriate loads, load combinations, and load factors for use in analyzing superstructure components during constructionBe able to analyze bridge members at various stages of erection* Develop erection plans that are safe and economical, and know what information is required and should be a part of those plansDescribe the differences between local, member and global (system) stability
Download or read book Engineering and Design written by Us Army Corps Of Engineers and published by Military Bookshop. This book was released on 1995-06 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides guidance on evaluating the condition of the concrete in a structure, relating the condition of the concrete to the underlying cause or causes of that condition, selecting an appropriate repair material and method for any deficiency found, and using the selected materials and methods to repair or rehabilitate the structure. Guidance is also included on maintenance of concrete and on preparation of concrete investigation reports for repair and rehabilitation projects. Considerations for certain specialized types of rehabilitation projects are also given.
Download or read book Bridge Evaluation Repair and Rehabilitation written by A.S. Nowak and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Evaluation, repair and rehabilitation of bridges are increasingly important topics in the effort to deal with the deteriorating infrastructure. For example, in the United States about 40 percent of the nation's 570,000 bridges are classified, according to the Federal Highway Administra tion's (FHW A) criteria, as deficient and in need of rehabilitation and replacement. In other countries the situation is similar. FHW A estimates the cost of a bridge replacement and reha bilitation program at 50 billion dollars. The major factors that have contributed to the present situation are: the age, inadequate maintenance, increasing load spectra and environmental contamination. The deficient bridges are posted, repaired or replaced. The disposition of bridges involves clear economical and safety implications. To avoid high costs of replacement or repair, the evaluation must accurately reveal the present load carrying capacity of the struc ture and predict loads and any further changes in the capacity (deterioration) in the applicable time span. Accuracy of bridge evaluation can be improved by using the recent developments in bridge diagnostics, structural tests, material tests, structural analysis and probabilistic methods. There is a need for an international exchange of advanced experience to increase the research effi ciency. The Workshop is organized on the premise that the exchange of existing American and European experience in the area of bridge evaluation, repair and rehabilitation is beneficial for both parties involved.
Download or read book LRFD Guide Specifications for the Design of Pedestrian Bridges written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 2009 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transit Noise and Vibration Impact Assessment written by Carl Hanson and published by . This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Maintenance Monitoring Safety Risk and Resilience of Bridges and Bridge Networks written by Tulio Nogueira Bittencourt and published by CRC Press. This book was released on 2016-11-17 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintenance, Monitoring, Safety, Risk and Resilience of Bridges and Bridge Networks contains the lectures and papers presented at the Eighth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2016), held in Foz do Iguaçu, Paraná, Brazil, 26-30 June, 2016. This volume consists of a book of extended abstracts and a DVD containing the full papers of 369 contributions presented at IABMAS 2016, including the T.Y. Lin Lecture, eight Keynote Lectures, and 360 technical papers from 38 countries. The contributions deal with the state-of-the-art as well as emerging concepts and innovative applications related to all main aspects of bridge maintenance, safety, management, resilience and sustainability. Major topics covered include: advanced materials, ageing of bridges, assessment and evaluation, bridge codes, bridge diagnostics, bridge management systems, composites, damage identification, design for durability, deterioration modeling, earthquake and accidental loadings, emerging technologies, fatigue, field testing, financial planning, health monitoring, high performance materials, inspection, life-cycle performance and cost, load models, maintenance strategies, non-destructive testing, optimization strategies, prediction of future traffic demands, rehabilitation, reliability and risk management, repair, replacement, residual service life, resilience, robustness, safety and serviceability, service life prediction, strengthening, structural integrity, and sustainability. This volume provides both an up-to-date overview of the field of bridge engineering as well as significant contributions to the process of making more rational decisions concerning bridge maintenance, safety, serviceability, resilience, sustainability, monitoring, risk-based management, and life-cycle performance using traditional and emerging technologies for the purpose of enhancing the welfare of society. It will serve as a valuable reference to all involved with bridge structure and infrastructure systems, including students, researchers and engineers from all areas of bridge engineering.
Download or read book Popular Science written by and published by . This book was released on 2002-12 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Popular Science gives our readers the information and tools to improve their technology and their world. The core belief that Popular Science and our readers share: The future is going to be better, and science and technology are the driving forces that will help make it better.
Download or read book Cal OSHA Pocket Guide for the Construction Industry written by and published by . This book was released on 2015-01-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cal/OSHA Pocket Guide for the Construction Industry is a handy guide for workers, employers, supervisors, and safety personnel. This latest 2011 edition is a quick field reference that summarizes selected safety standards from the California Code of Regulations. The major subject headings are alphabetized and cross-referenced within the text, and it has a detailed index. Spiral bound, 8.5 x 5.5"
Download or read book Infrared Thermography Recent Advances and Future Trends written by Carosena Meola and published by Bentham Science Publishers. This book was released on 2012-08-03 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared thermography (IRT) is a non-contact, non-invasive methodology which allows for detection of thermal energy that is radiated from objects in the infrared band of the electromagnetic spectrum, for conversion of such energy into a visible image (such as a surface temperature map). This feature represents a great potential to be exploited in a vast variety of fields from aerospace to civil engineering, to medicine, to agriculture, etc. However, IRT is still not adequately enclosed in industrial instrumentation and there are still potential users who might benefit from the use of such a technique and who are not aware of their existence. This e-book conveys information about basic IRT theory, infrared detectors, signal digitalization and applications of infrared thermography in many fields such as medicine, foodstuff conservation, fluid-dynamics, architecture, anthropology, condition monitoring, non destructive testing and evaluation of materials and structures. The volume promotes an exchange of information between the academic world and industry, and shares methodologies which were independently developed and applied in specific disciplines.
Download or read book Impact echo written by Mary Sansalone and published by . This book was released on 1997 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
