Download or read book Autodesk Inventor 2021 Advanced Assembly Modeling Mixed Units Autodesk Authorized Publisher written by ASCENT - Center for Technical Knowledge and published by Ascent, Center for Technical Knowledge. This book was released on 2020-05-11 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Autodesk(R) Inventor(R) 2021: Advanced Assembly Modeling guide builds on the skills acquired in the Autodesk Inventor 2021: Introduction to Solid Modeling and Autodesk Inventor 2021: Advanced Part Modeling guides to take you to a higher level of productivity when creating and working with assemblies. You begin by focusing on the Top-Down Design workflow. You learn how tools are used to achieve this workflow using Derive, Multi-Body Design, and Layouts. Other topics include model simplification tools, Positional and Level of Detail Representations, iMates and iAssemblies, Frame Generator, Design Accelerator, and file management and duplication techniques. A chapter has also been included about the Autodesk(R) Inventor(R) Studio to teach you how to render, produce, and animate realistic images. Topics Covered Applying motion to existing assembly constraints using Motion and Transitional Constraints. Introduction of the Top-Down Design technique for creating assemblies and its components. Tools for Top-Down Design, such as associative links, adaptive parts, multi-body and layout design, derived components, and skeleton models. Creating Positional Representations to review motion, evaluate the position of assembly components, or document an assembly in a drawing. Using Shrinkwrap and other model simplification tools to create a part model that represents an overall assembly. Creating Level of Detail Representations to reduce the clutter of large assemblies, reduce retrieval times, and substituting models. Using the Design Accelerator to easily insert standard and customizable components and features into your model. Creating rendered realistic images and animations of parts and assemblies using Autodesk Inventor Studio and the Video Producer. Prerequisites Access to the 2021.0 version of the software, to ensure compatibility with this guide. Future software updates that are released by Autodesk may include changes that are not reflected in this guide. The practices and files included with this guide are not compatible with prior versions (e.g., 2020). The class assumes mastery of Autodesk Inventor basics as taught in Autodesk(R) Inventor(R) Introduction to Solid Modeling. In addition, Autodesk(R) Inventor(R) Advanced Part Modeling knowledge is recommended. The use of Microsoft(R) Excel is required for this training course.

Download or read book Autodesk Inventor 2022 Advanced Assembly Modeling Mixed Units Autodesk Authorized Publisher written by Ascent - Center for Technical Knowledge and published by Ascent, Center for Technical Knowledge. This book was released on 2021-06-18 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Autodesk(R) Inventor(R) 2022: Advanced Assembly Modeling guide builds on the skills acquired in the Autodesk Inventor 2022: Introduction to Solid Modeling and Autodesk Inventor 2022: Advanced Part Modeling guides to take you to a higher level of productivity when creating and working with assemblies. You begin by focusing on the Top-Down Design workflow. You learn how tools are used to achieve this workflow using Derive, Multi-Body Design, and Layouts. Other topics include model simplification tools, positional representations, model states, iMates and iAssemblies, Frame Generator, Design Accelerator, and file management and duplication techniques. A chapter has also been included about the Autodesk(R) Inventor(R) Studio to teach you how to render, produce, and animate realistic images. Topics Covered Applying motion to existing assembly constraints using Motion and Transitional constraints. Introduction of the Top-Down Design technique for creating assemblies and their components. Tools for Top-Down Design, such as associative links, adaptive parts, multi-body and layout design, derived components, and skeleton models. Creating positional representations to review motion, evaluate the position of assembly components, or document an assembly in a drawing. Using the model simplification tools to create simplified part models and views of assembly designs. Creating model states and iAssemblies to create customizable versions of assembly designs. Creating rendered realistic images and animations of parts and assemblies using Autodesk Inventor Studio and the Video Producer. Using the Design Accelerator and Frame Generator to easily insert standard and customizable components and features into your model. Efficiently duplicating components in an assembly. Adding welds and weld symbols to weldment assemblies. Prerequisites Access to the 2022.0 version of the software, to ensure compatibility with this guide. Future software updates that are released by Autodesk may include changes that are not reflected in this guide. The practices and files included with this guide are not compatible with prior versions (e.g., 2021). The class assumes mastery of Autodesk Inventor basics as taught in Autodesk Inventor: Introduction to Solid Modeling. In addition, Autodesk Inventor: Advanced Part Modeling knowledge is recommended. The use of Microsoft(R) Excel is required for this training course.

Download or read book Autodesk Inventor 2020 Advanced Assembly Modeling Mixed Units written by ASCENT - Center for Technical Knowledge and published by . This book was released on 2019-07-11 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Autodesk(R) Inventor(R) 2020: Advanced Assembly Modeling guide builds on the skills acquired in the Autodesk Inventor 2020: Introduction to Solid Modeling and Autodesk Inventor 2020: Advanced Part Modeling guides to take you to a higher level of productivity when creating and working with assemblies. You begin by focusing on the Top-Down Design workflow. You learn how tools are used to achieve this workflow using Derive, Multi-Body Design, and Layouts. Other topics include model simplification tools, Positional and Level of Detail Representations, iMates and iAssemblies, Frame Generator, Design Accelerator, and file management and duplication techniques. A chapter has also been included about the Autodesk(R) Inventor(R) Studio to teach you how to render, produce, and animate realistic images. Topics Covered Applying motion to existing assembly constraints using Motion and Transitional Constraints. Introduction of the Top-Down Design technique for creating assemblies and its components. Tools for Top-Down Design, such as associative links, adaptive parts, multi-body and layout design, derived components, and skeleton models. Creating Positional Representations to review motion, evaluate the position of assembly components, or document an assembly in a drawing. Using Shrinkwrap and other model simplification tools to create a part model that represents an overall assembly. Creating Level of Detail Representations to reduce the clutter of large assemblies, reduce retrieval times, and substituting models. Using the Design Accelerator to easily insert standard and customizable components and features into your model. Creating rendered realistic images and animations of parts and assemblies using Autodesk Inventor Studio and the Video Producer. Prerequisites Access to the 2020.0 version of the software, to ensure compatibility with this guide. Future software updates that are released by Autodesk may include changes that are not reflected in this guide. The practices and files included with this guide are not compatible with prior versions (i.e., 2019). The class assumes mastery of Autodesk Inventor basics as taught in Autodesk(R) Inventor(R) Introduction to Solid Modeling. In addition, Autodesk(R) Inventor(R) Advanced Part Modeling knowledge is recommended. The use of Microsoft(R) Excel is required for this guide.

Download or read book Autodesk Inventor 2023 Advanced Assembly Modeling Mixed Units written by ASCENT - Center for Technical Knowledge and published by . This book was released on 2022-05-06 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Autodesk Inventor 2021 written by Ascent - Center for Technical Knowledge and published by . This book was released on 2020-08-18 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Autodesk(R) Inventor(R) 2021: Design Variations and Representations guide contains topics that teach how to efficiently create and represent designs based on existing geometry. You will learn how the iFeature, iPart, and iAssembly tools can leverage existing geometry to quickly create additional or slightly varied geometry. Additionally, how iMates can be used for placement in an assembly. The remaining chapters focus on how you can create positional configurations to evaluate a components' range of motion (Positional Representations), create simplified geometry to share with customers while protecting your intellectual property (Shrinkwrap and Assembly Simplification), and how to manage large assemblies (Level of Detail Representations). The topics covered in this guide are also covered in the following ASCENT guides, which include a broader range of advanced topics: Autodesk(R) Inventor(R) 2021: Advanced Assembly Modeling Autodesk(R) Inventor(R) 2021: Advanced Part Modeling Topics Covered Create and place an iFeature. Use the Copy command to duplicate features in or between models. Create an iPart that can generate different configurations of a model. Insert standard or custom iParts into an assembly. Modify an iPart factory. Use a table-driven iPart to create an iFeature. Build iMate constraints into parts or subassemblies. Manually or automatically match iMates of parts in an assembly and use a Match List. Create, place, and edit an iAssembly. Create and edit different positional representations of an assembly. Create a Shrinkwrap part. Selectively determine which components to include in a simplified view and use that information to create a new part model. Define bounding box or cylindrical geometry to represent assembly components and use that information to create a new part model. Combine the use of a simplified view, envelopes, and visibility settings to create a new simplified model. Create and use Level of Detail representations in an assembly. Prerequisites Access to the 2021.0 version of the software, to ensure compatibility with this guide. Future software updates that are released by Autodesk may include changes that are not reflected in this guide. The practices and files included with this guide might not be compatible with prior versions (i.e., 2020). The material covered in this guide assumes a mastery of Autodesk Inventor basics as taught in the Autodesk Inventor: Introduction to Solid Modeling guide.

Download or read book Autodesk Inventor 2021 written by Ascent - Center for Technical Knowledge and published by . This book was released on 2020-08-18 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Autodesk(R) Inventor(R) 2021: Design Tools and Strategies guide provides instruction on how to incorporate the use of top-down design and advanced modeling techniques into your design environment. The guide begins with an introduction to top-down design and the software tools that can be used. There is a focus on multi-body design, deriving components, working with layouts and sketch blocks, and how associative links and adaptive parts can help you incorporate design intent into your models. The guide also includes chapters that cover Generative Shape Design, Frame Generator, and Design Accelerator, teaching you how you can use these advanced design tools to quickly create designs that meet your requirements. The topics covered in this guide are also covered in the following ASCENT guides, which include a broader range of advanced topics: Autodesk(R) Inventor(R) 2021: Advanced Assembly Modeling Autodesk(R) Inventor(R) 2021: Advanced Part Modeling Topics Covered Learn how to enforce design intent using three major top-down design techniques. Create solid bodies and correctly assign features to specific solid bodies. Modify solid bodies in a model by moving, removing, splitting, combining, or redefining them. Create new parts and assemblies from multi-bodies. Derive new geometry in a part by importing and referencing objects from a source part. Create and modify layouts and sketch blocks. Define and test the kinematic motion with the use of nested sketch blocks. Create 3D models from sketch blocks. Specify geometric entities of part features to change, while controlling the size or location of other entities in an assembly. Create a Shape Generator study that sets a goal and criteria to accurately define a model's working environment. Promote a Shape Generator study to the modeling environment. Create structural frames members using a skeletal wireframe part. Adjust frame member ends to obtain required joints. Create and publish custom frame member profiles to the Content Center. Automatically create geometry using component generators. Prerequisites Access to the 2021.0 version of the software, to ensure compatibility with this guide. Future software updates that are released by Autodesk may include changes that are not reflected in this guide. The practices and files included with this guide might not be compatible with prior versions (i.e., 2020). The material covered in this guide assumes a mastery of Autodesk Inventor basics as taught in the Autodesk Inventor: Introduction to Solid Modeling guide.

Download or read book Autodesk Inventor 2021 written by Ascent - Center for Technical Knowledge and published by . This book was released on 2020-08-19 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Autodesk(R) Inventor(R) 2021: Presenting Designs with Image and Animation Tools learning guide teaches you tools in the Autodesk(R) Inventor(R) software that can be used to enhance how designs are presented. You begin in the modeling environment, learning how to customize visual styles, include reflections and shadows in a display, set up and control lighting, and assign material appearances. The guide also discusses the Presentation and Inventor Studio environments. The Presentation environment enables you to create snapshot views (still images) and animations to help document an assembly and show how parts relate to each other (exploded drawing views). Inventor Studio is an alternate tool that can also be used to create realistic renderings or animations. The topics covered in this guide are also covered in the following ASCENT guides, which include a broader range of advanced topics: Autodesk(R) Inventor(R) 2021: Introduction to Solid Modeling Autodesk(R) Inventor(R) 2021: Advanced Assembly Modeling Autodesk(R) Inventor(R) 2021: Advanced Part Modeling Objectives Enhance the appearance of surfaces and edges of a model by assigning visual styles, ray tracing, reflections, shadows, and a ground plane. Customize and assign lighting styles to control the number, color, and intensity of light sources in a model. Manipulate the visual appearance of a material using the in-canvas appearance and texture tools. Create, assign, and edit existing appearances in the model using the Appearance Browser. Understand how presentation files can be used to document an assembly model. Create a presentation file with animations or Snapshot views. Publish a presentation file to create images and videos. Render a realistic image of a model that has had appearance, lighting, and camera customizations. Create a realistic animation of a model by applying parameters, constraints, and actions. Create a composite video by combining camera shots, animations, and transitions using the Video Producer. Create a custom environment for use when rendering models. Prerequisites Access to the 2021.0 version of the software, to ensure compatibility with this guide. Future software updates that are released by Autodesk may include changes that are not reflected in this guide. The practices and files included with this guide are not compatible with prior versions (i.e., 2020). The material covered in this training guide assumes a mastery of Autodesk Inventor basics as taught in Autodesk Inventor: Introduction to Solid Modeling.

Download or read book Autodesk Inventor 2022 Advanced Part Modeling Mixed Units written by ASCENT - Center for Technical Knowledge and published by . This book was released on 2021-05-27 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Autodesk Inventor 2021 written by Ascent - Center for Technical Knowledge and published by . This book was released on 2020-08-19 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Autodesk(R) Inventor(R) 2021: Surface and Freeform Modeling guide teaches you how to incorporate surfacing and freeform modeling techniques into your design environment. You begin with instruction on how to create the splines and 3D sketches commonly used in surface creation. Chapters on surface creation focus on using these sketches or existing geometry to create surfaces for use in your solid models. Freeform modeling is also covered, which enables you to create complex shapes without needing the constraints required in a parametric workflow. To complete the guide, you will learn how to use the Autodesk Inventor surface analysis tools to evaluate the continuity between surfaces and the curvature on a surface, determine if the applied draft is within a specified range, and conduct section analysis to evaluate wall thickness values. The topics covered in this guide are also covered in ASCENT's Autodesk(R) Inventor(R) 2021: Advanced Part Modeling guide, which includes a broader range of advanced learning topics. Topics Covered Create spline and 3D sketched entities. Create planar and three-dimensional surfaces. Combine individual surface features into a single quilted surface. Add or remove material in a model by referencing a surface. Create solid geometry using surface geometry. Remove portions of a surface using a reference surface or work plane. Manipulate the extent of a surface by extending or stretching it. Create a new solid face by replacing an existing solid face with surface geometry. Remove existing surfaces or solid faces from a model. Copy surfaces from one model into another. Create freeform geometry base shapes, faces, and converted geometry. Edit freeform base geometry by manipulating existing geometry or adding new elements to the base shape. Use the surface analysis tools to evaluate continuity between surfaces, check draft values, analyze curvature on a surface, and review sectioned areas of the model. Prerequisites Access to the 2021.0 version of the software, to ensure compatibility with this guide. Future software updates that are released by Autodesk may include changes that are not reflected in this guide. The practices and files included with this guide might not be compatible with prior versions (i.e., 2010). The material covered in this guide assumes a mastery of Autodesk Inventor basics as taught in the Autodesk Inventor: Introduction to Solid Modeling guide.

Download or read book Autodesk Inventor 2022 ILogic Mixed Units written by ASCENT - Center for Technical Knowledge and published by . This book was released on 2021-08-30 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Autodesk Inventor 2021 written by Ascent - Center for Technical Knowledge and published by . This book was released on 2020-08-19 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Autodesk(R) Inventor(R) 2021: Working with Imported Geometry guide teaches you how to work with data from other CAD platforms using the Autodesk Inventor software. Using this guide, you will learn the various methods for importing data into Autodesk Inventor and how you can edit both imported solid and surface data. Additionally, you will learn how to index scanned point cloud data, and attach and use it in an Inventor file. The final chapters in this guide discuss how you can use AutoCAD .DWG files in the Autodesk Inventor software. The topics covered in this guide are also covered in ASCENT's Autodesk(R) Inventor(R) 2021: Advanced Part Modeling guide, which includes a broader range of advanced learning topics. Topics Covered Import CAD data into the Autodesk Inventor software. Export CAD data from the Autodesk Inventor software in an available export format. Index a supported point cloud data file, attach, and edit it for use in a file. Use the Edit Base Solid environment to edit solids that have been imported into the Autodesk Inventor software. Create Direct Edit features in a model that move, resize, scale, rotate, and delete existing geometry in both imported and native Autodesk Inventor files. Set the import options to import surface data from other file format types. Transfer imported surface data into the Repair Environment to conduct a quality check for errors. Appropriately set the stitch tolerance value so that gaps in the imported geometry can be automatically stitched and identify the gaps that are not stitched. Use the Repair Environment commands to repair gaps or delete, extend, replace, trim and break surfaces to successfully create a solid from the imported geometry. Open an AutoCAD DWG file directly into an Autodesk Inventor part file and review the data. Use the DWG/DXF File Wizard and its options to import files into an Autodesk Inventor file. Use an AutoCAD DWG file in an Autodesk Inventor part file so that the geometry created in Inventor remains associative with the AutoCAD DWG file. Prerequisites Access to the 2021.0 version of the software, to ensure compatibility with this guide. Future software updates that are released by Autodesk may include changes that are not reflected in this guide. The practices and files included with this guide might not be compatible with prior versions (i.e., 2010). The material covered in this guide assumes a mastery of Autodesk Inventor basics as taught in the Autodesk Inventor: Introduction to Solid Modeling guide.

Download or read book Autodesk Inventor 2021 Introduction to Solid Modeling Part 1 Mixed Units written by ASCENT - Center for Technical Knowledge and published by . This book was released on 2020-03-30 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Autodesk Inventor 2020 written by ASCENT - Center for Technical Knowledge and published by . This book was released on 2020-02-05 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Autodesk(R) Inventor(R) 2020: Design Variations and Representations guide contains topics that teach how to efficiently create and represent designs based on existing geometry. You will learn how the iFeature, iPart, and iAssembly tools can leverage existing geometry to quickly create additional or slightly varied geometry. Additionally, how iMates can be used for placement in an assembly. The remaining chapters focus on how you can create positional configurations to evaluate a components' range of motion (Positional Representations), create simplified geometry to share with customers while protecting your intellectual property (Shrinkwrap and Assembly Simplification), and how to manage large assemblies (Level of Detail Representations). The topics covered in this guide are also covered in the following ASCENT guides, which include a broader range of advanced topics: Autodesk(R) Inventor(R) 2020: Advanced Assembly Modeling Autodesk(R) Inventor(R) 2020: Advanced Part Modeling Topics Covered Create and place an iFeature. Use the Copy command to duplicate features in or between models. Create an iPart that can generate different configurations of a model. Insert standard or custom iParts into an assembly. Modify an iPart factory. Use a table-driven iPart to create an iFeature. Build iMate constraints into parts or subassemblies. Manually or automatically match iMates of parts in an assembly and use a Match List. Create, place, and edit an iAssembly. Create and edit different positional representations of an assembly. Create a Shrinkwrap part. Selectively determine which components to include in a simplified view and use that information to create a new part model. Define bounding box or cylindrical geometry to represent assembly components and use that information to create a new part model. Combine the use of a simplified view, envelopes, and visibility settings to create a new simplified model. Create and use Level of Detail representations in an assembly. Prerequisites Access to the 2020.0 version of the software, to ensure compatibility with this guide. Future software updates that are released by Autodesk may include changes that are not reflected in this guide. The practices and files included with this guide might not be compatible with prior versions (i.e., 2019). The material covered in this guide assumes a mastery of Autodesk Inventor basics as taught in the Autodesk Inventor: Introduction to Solid Modeling guide.

Download or read book Autodesk Inventor 2021 Basics Tutorial written by Tutorial Books and published by . This book was released on 2020-10-15 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: A step-by-step tutorial on Autodesk Inventor basics Autodesk Inventor is used by design professionals for 3D modeling, generating 2D drawings, finite element analysis, mold design, and other purposes. This tutorial is aimed at novice users of Inventor and gives you all the basic information you need so you can get the essential skills to work in Autodesk Inventor immediately. This book will get you started with the basics of part modeling, assembly modeling, presentations, and drawings. Next, it teaches you some intermediate-level topics such as additional part modeling tools, sheet metal modeling, top-down assembly feature, assembly joints, dimension & annotations, model-based dimensioning, frame generator. Brief explanations, practical examples, and stepwise instructions make this tutorial complete.

Download or read book Autodesk Inventor 2021 Advanced Part Modeling written by ASCENT - Center for Technical Knowledge and published by . This book was released on 2020-04-21 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Autodesk Inventor 2020 Advanced Part Modeling Mixed Units written by ASCENT - Center for Technical Knowledge and published by . This book was released on 2019-07-11 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autodesk(R) Inventor(R) 2020: Advanced Part Modeling is the second in a series of guides on the Autodesk(R) Inventor(R) software that is published by ASCENT. The goal of this guide is to build on the skills acquired in the Autodesk Inventor: Introduction to Solid Modeling learning guide by taking users to a higher level of productivity when designing part models using the Autodesk Inventor software. In this guide, the user considers various approaches to part design. Specific advanced part modeling techniques covered include: multi-body design, advanced lofts, advanced sweeps, coils, generative shape design, surface modeling, and Freeform modeling. Material aimed at increasing efficiency includes: iFeatures for frequently used design elements, iParts for similar designs, and how to work with imported data. The guide also covers some miscellaneous drawing tools, such as: custom sketches symbols, working with title blocks and borders, and documenting iParts. Topics Covered Advanced model appearance options 2D and 3D sketching techniques Multi-body part modeling Advanced geometry creation tools (work features, area lofts, sweeps, and coils) Analysis tools Generative shape design using Shape Generator Creating and editing basic surfaces, importing surfaces, and surface repair tools iFeatures and iParts Importing data from other CAD systems and making edits Working with AutoCAD DWG files Freeform modeling Emboss and Decal features Advanced Drawing tools (iPart tables, surfaces in drawing views, and custom sketched symbols) Adding notes with the Engineer's Notebook Prerequisites Access to the 2020.0 version of the software (or later). The practices and files included with this guide are not compatible with prior versions. Future software updates that are released by Autodesk may include changes that will not be reflected in this guide. The material assumes a mastery of Autodesk Inventor basics, as taught in Autodesk(R) Inventor(R) Introduction to Solid Modeling. Users should know how to create and edit parts, use work features, create and annotate drawing views, etc. The use of Microsoft Excel is required for this guide.

Download or read book Technical Drawing 101 with AutoCAD 2022 written by Ashleigh Congdon-Fuller and published by SDC Publications. This book was released on 2021-07 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Blends technical drawing and an introduction to AutoCAD 2022 • Covers both mechanical and architectural projects • Twenty six hours of video instruction is included with each book • Drafting theory is incorporated throughout the text • Designed to be used in a single semester, instructor led course • Each chapter contains key terms, unit summaries, review questions and drawing projects Technical Drawing 101 covers topics ranging from the most basic, such as making freehand, multiview sketches of machine parts, to the advanced—creating an AutoCAD dimension style containing the style settings defined by the ASME Y14.5-2009 Dimensioning and Tolerancing standard. But unlike the massive technical drawing reference texts on the market, Technical Drawing 101 aims to present just the right mix of information and projects that can be reasonably covered by faculty, and assimilated by students, in one semester. Both mechanical and architectural projects are introduced to capture the interest of more students and to offer a broader appeal. The authors have also created extensive video training (176 videos, 26 hours total) that is included with every copy of the book. In these videos the authors start off by getting students comfortable with the user interface and demonstrating how to use many of AutoCAD's commands and features. The videos progress to more advanced topics where the authors walk students through completing several of the projects in the book. The CAD portion of the text incorporates drafting theory whenever possible and covers the basics of drawing setup (units, limits, and layers), the tools of the Draw, Modify, and Dimension toolbars, and the fundamentals of 3D modeling. By focusing on the fundamental building blocks of CAD, Technical Drawing 101 provides a solid foundation for students going on to learn advanced CAD concepts and techniques (paper space, viewports, xrefs, annotative scaling, etc.) in intermediate CAD courses. In recognition of the diverse career interests of our students, Technical Drawing 101 includes projects in which students create working drawings for a mechanical assembly as well as for an architectural project. We include architectural drawing because our experience has shown that many (if not most) first-semester drafting students are interested in careers in the architectural design field, and that a traditional technical drawing text, which focuses solely on mechanical drawing projects, holds little interest for these students. The multidisciplinary approach of this text and its supporting materials are intended to broaden the appeal of the curriculum and increase student interest and, it is hoped, future enrollments.