Download or read book Autodesk Inventor 2020 A Tutorial Introduction written by L. Scott Hansen and published by SDC Publications. This book was released on with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique text and video set presents a thorough introduction to Autodesk Inventor for anyone with little or no prior experience with CAD software. It can be used in virtually any setting from four year engineering schools to on-the-job use or self-study. Unlike other books of its kind, it begins at a very basic level and ends at a very advanced level. It’s perfect for anyone interested in learning Autodesk Inventor quickly and effectively using a “learning by doing” approach. Additionally, the extensive videos that are included with this book make it easier than ever to learn Inventor by clearly demonstrating how to use its tools. The philosophy behind this book is that learning computer aided design programs is best accomplished by emphasizing the application of the tools. Students also seem to learn more quickly and retain information and skills better if they are actually creating something with the software program. The driving force behind this book is “learning by doing.” The instructional format of this book centers on making sure that students learn by doing and that students can learn from this book on their own. In fact, this is one thing that differentiates this book from others: the emphasis on being able to use the book for self-study. The presentation of Autodesk Inventor is structured so that no previous knowledge of any CAD program is required. This book uses the philosophy that Inventor is mastered best by concentrating on applying the program to create different types of solid models, starting simply and then using the power of the program to progressively create more complex solid models. The Drawing Activities at the end of each chapter are more complex iterations of the part developed by each chapter’s objectives. Since CAD programs are highly visual, there are graphical illustrations showing how to use the program. This reinforces the “learn by doing” philosophy since a student can see exactly what the program shows, and then step through progressive commands to implement the required operations. Rather than using a verbal description of the command, a screen capture of each command is replicated.

Download or read book Autodesk Inventor 2015 written by L. Scott Hansen and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Autodesk Inventor 2024 written by L. Scott Hansen and published by SDC Publications. This book was released on 2023-05 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Designed for anyone who wants to learn Autodesk Inventor • Absolutely no previous experience with CAD is required • Uses a learn by doing approach • Starts at a basic level and guides you to an advanced user level • Includes extensive video instruction This unique text and video set presents a thorough introduction to Autodesk Inventor for anyone with little or no prior experience with CAD software. It can be used in virtually any setting from four year engineering schools to on-the-job use or self-study. Unlike other books of its kind, it begins at a very basic level and ends at a very advanced level. It’s perfect for anyone interested in learning Autodesk Inventor quickly and effectively using a “learning by doing” approach. Additionally, the extensive videos that are included with this book make it easier than ever to learn Inventor by clearly demonstrating how to use its tools. The philosophy behind this book is that learning computer aided design programs is best accomplished by emphasizing the application of the tools. Students also seem to learn more quickly and retain information and skills better if they are actually creating something with the software program. The driving force behind this book is “learning by doing.” The instructional format of this book centers on making sure that students learn by doing and that students can learn from this book on their own. In fact, this is one thing that differentiates this book from others: the emphasis on being able to use the book for self-study. The presentation of Autodesk Inventor is structured so that no previous knowledge of any CAD program is required. This book uses the philosophy that Inventor is mastered best by concentrating on applying the program to create different types of solid models, starting simply and then using the power of the program to progressively create more complex solid models. The Drawing Activities at the end of each chapter are more complex iterations of the part developed by each chapter’s objectives. Since CAD programs are highly visual, there are graphical illustrations showing how to use the program. This reinforces the “learn by doing” philosophy since a student can see exactly what the program shows, and then step through progressive commands to implement the required operations. Rather than using a verbal description of the command, a screen capture of each command is replicated. Included Videos Each book includes access to extensive video training created by author Scott Hansen. The videos follow along with the table of contents of the book. Each chapter has one or more videos in which the author demonstrates how to use the tools that are covered in that chapter. Most videos follow an exercise from start to finish. The exercises created in the video are very similar to the exercise found in the corresponding chapter. Throughout the videos Scott Hansen describes how to perform each step, the reason behind these steps, and some of the other options available with the various tools. The author's clear and simple description of each exercise is a perfect companion to the text and makes learning Autodesk Inventor easier than ever. There are thirty-four videos with four hours and thirty-nine minutes of training in total.

Download or read book Autodesk Inventor 2021 A Tutorial Introduction written by L. Scott Hansen and published by SDC Publications. This book was released on 2020-03 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique text and video set presents a thorough introduction to Autodesk Inventor for anyone with little or no prior experience with CAD software. It can be used in virtually any setting from four year engineering schools to on-the-job use or self-study. Unlike other books of its kind, it begins at a very basic level and ends at a very advanced level. It’s perfect for anyone interested in learning Autodesk Inventor quickly and effectively using a “learning by doing” approach. Additionally, the extensive videos that are included with this book make it easier than ever to learn Inventor by clearly demonstrating how to use its tools. The philosophy behind this book is that learning computer aided design programs is best accomplished by emphasizing the application of the tools. Students also seem to learn more quickly and retain information and skills better if they are actually creating something with the software program. The driving force behind this book is “learning by doing.” The instructional format of this book centers on making sure that students learn by doing and that students can learn from this book on their own. In fact, this is one thing that differentiates this book from others: the emphasis on being able to use the book for self-study. The presentation of Autodesk Inventor is structured so that no previous knowledge of any CAD program is required. This book uses the philosophy that Inventor is mastered best by concentrating on applying the program to create different types of solid models, starting simply and then using the power of the program to progressively create more complex solid models. The Drawing Activities at the end of each chapter are more complex iterations of the part developed by each chapter’s objectives. Since CAD programs are highly visual, there are graphical illustrations showing how to use the program. This reinforces the “learn by doing” philosophy since a student can see exactly what the program shows, and then step through progressive commands to implement the required operations. Rather than using a verbal description of the command, a screen capture of each command is replicated.

Download or read book Autodesk Inventor 2015 A Tutorial Introduction written by L. Scott Hansen and published by SDC Publications. This book was released on 2014-03 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique text presents a thorough introduction to Autodesk Inventor for anyone with little or no prior experience with CAD software. It can be used in virtually any setting from four year engineering schools to on-the-job use or self-study. Unlike other books of its kind, it begins at a very basic level and ends at a very advanced level. It’s perfect for anyone interested in learning Autodesk Inventor quickly and effectively using a “learning by doing” approach. The philosophy behind this book is that learning computer aided design programs is best accomplished by emphasizing the application of the tools. Students also seem to learn more quickly and retain information and skills better if they are actually creating something with the software program. The driving force behind this book is “learning by doing.” The instructional format of this book centers on making sure that students learn by doing and that students can learn from this book on their own. In fact, this is one thing that differentiates this book from others: the emphasis on being able to use the book for self-study. The presentation of Autodesk Inventor is structured so that no previous knowledge of any CAD program is required. This book uses the philosophy that Inventor is mastered best by concentrating on applying the program to create different types of solid models, starting simply and then using the power of the program to progressively create more complex solid models. The Drawing Activities at the end of each chapter are more complex iterations of the part developed by each chapter’s objectives. CAD programs are highly visual, there are graphical illustrations showing how to use the program. This reinforces the “learn by doing” philosophy since a student can see exactly what the program shows, and then step through progressive commands to implement the required operations. Rather than using a verbal description of the command, a screen capture of each command is replicated.

Download or read book Autodesk Inventor 2025 written by L. Scott Hansen and published by SDC Publications. This book was released on with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Designed for anyone who wants to learn Autodesk Inventor • Absolutely no previous experience with CAD is required • Uses a learn by doing approach • Starts at a basic level and guides you to an advanced user level • Includes extensive video instruction This unique text and video set presents a thorough introduction to Autodesk Inventor for anyone with little or no prior experience with CAD software. It can be used in virtually any setting from four year engineering schools to on-the-job use or self-study. Unlike other books of its kind, it begins at a very basic level and ends at a very advanced level. It’s perfect for anyone interested in learning Autodesk Inventor quickly and effectively using a “learning by doing” approach. Additionally, the extensive videos that are included with this book make it easier than ever to learn Inventor by clearly demonstrating how to use its tools. The philosophy behind this book is that learning computer aided design programs is best accomplished by emphasizing the application of the tools. Students also seem to learn more quickly and retain information and skills better if they are actually creating something with the software program. The driving force behind this book is “learning by doing.” The instructional format of this book centers on making sure that students learn by doing and that students can learn from this book on their own. In fact, this is one thing that differentiates this book from others: the emphasis on being able to use the book for self-study. The presentation of Autodesk Inventor is structured so that no previous knowledge of any CAD program is required. This book uses the philosophy that Inventor is mastered best by concentrating on applying the program to create different types of solid models, starting simply and then using the power of the program to progressively create more complex solid models. The Drawing Activities at the end of each chapter are more complex iterations of the part developed by each chapter’s objectives. Since CAD programs are highly visual, there are graphical illustrations showing how to use the program. This reinforces the “learn by doing” philosophy since a student can see exactly what the program shows, and then step through progressive commands to implement the required operations. Rather than using a verbal description of the command, a screen capture of each command is replicated. Included Videos Each book includes access to extensive video training created by author Scott Hansen. The videos follow along with the table of contents of the book. Each chapter has one or more videos in which the author demonstrates how to use the tools that are covered in that chapter. Most videos follow an exercise from start to finish. The exercises created in the video are very similar to the exercise found in the corresponding chapter. Throughout the videos Scott Hansen describes how to perform each step, the reason behind these steps, and some of the other options available with the various tools. The author's clear and simple description of each exercise is a perfect companion to the text and makes learning Autodesk Inventor easier than ever. There are thirty-four videos with four hours and thirty-nine minutes of training in total.

Download or read book Autodesk Inventor 2014 written by Scott Hansen and published by SDC Publications. This book was released on 2013-04 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique text presents a thorough introduction to Autodesk Inventor for anyone with little or no prior experience with CAD software. It can be used in virtually any setting from four year engineering schools to on-the-job use or self-study. Unlike other books of its kind, it begins at a very basic level and ends at a very advanced level. It’s perfect for anyone interested in learning Autodesk Inventor quickly and effectively using a “learning by doing” approach. The philosophy behind this book is that learning computer aided design programs is best accomplished by emphasizing the application of the tools. Students also seem to learn more quickly and retain information and skills better if they are actually creating something with the software program. The driving force behind this book is “learning by doing.” The instructional format of this book centers on making sure that students learn by doing and that students can learn from this book on their own. In fact, this is one thing that differentiates this book from others: the emphasis on being able to use the book for self-study. The presentation of Autodesk Inventor is structured so that no previous knowledge of any CAD program is required. This book uses the philosophy that Inventor is mastered best by concentrating on applying the program to create different types of solid models, starting simply and then using the power of the program to progressively create more complex solid models. The Drawing Activities at the end of each chapter are more complex iterations of the part developed by each chapter’s objectives. CAD programs are highly visual, there are graphical illustrations showing how to use the program. This reinforces the “learn by doing” philosophy since a student can see exactly what the program shows, and then step through progressive commands to implement the required operations. Rather than using a verbal description of the command, a screen capture of each command is replicated.

Download or read book Autodesk Inventor 2022 A Tutorial Introduction written by L. Scott Hansen and published by SDC Publications. This book was released on with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique text and video set presents a thorough introduction to Autodesk Inventor for anyone with little or no prior experience with CAD software. It can be used in virtually any setting from four year engineering schools to on-the-job use or self-study. Unlike other books of its kind, it begins at a very basic level and ends at a very advanced level. It’s perfect for anyone interested in learning Autodesk Inventor quickly and effectively using a “learning by doing” approach. Additionally, the extensive videos that are included with this book make it easier than ever to learn Inventor by clearly demonstrating how to use its tools. The philosophy behind this book is that learning computer aided design programs is best accomplished by emphasizing the application of the tools. Students also seem to learn more quickly and retain information and skills better if they are actually creating something with the software program. The driving force behind this book is “learning by doing.” The instructional format of this book centers on making sure that students learn by doing and that students can learn from this book on their own. In fact, this is one thing that differentiates this book from others: the emphasis on being able to use the book for self-study. The presentation of Autodesk Inventor is structured so that no previous knowledge of any CAD program is required. This book uses the philosophy that Inventor is mastered best by concentrating on applying the program to create different types of solid models, starting simply and then using the power of the program to progressively create more complex solid models. The Drawing Activities at the end of each chapter are more complex iterations of the part developed by each chapter’s objectives. Since CAD programs are highly visual, there are graphical illustrations showing how to use the program. This reinforces the “learn by doing” philosophy since a student can see exactly what the program shows, and then step through progressive commands to implement the required operations. Rather than using a verbal description of the command, a screen capture of each command is replicated. Included Videos Each book includes access to extensive video training created by author Scott Hansen. The videos follow along with the table of contents of the book. Each chapter has one or more videos in which the author demonstrates how to use the tools that are covered in that chapter. Most videos follow an exercise from start to finish. The exercises created in the video are very similar to the exercise found in the corresponding chapter. Throughout the videos Scott Hansen describes how to perform each step, the reason behind these steps, and some of the other options available with the various tools. The author's clear and simple description of each exercise is a perfect companion to the text and makes learning Autodesk Inventor easier than ever. There are twenty-seven videos with three hours and forty-five minutes of training in total.

Download or read book Autodesk Inventor 2023 A Tutorial Introduction written by L. Scott Hansen and published by SDC Publications. This book was released on with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique text and video set presents a thorough introduction to Autodesk Inventor for anyone with little or no prior experience with CAD software. It can be used in virtually any setting from four year engineering schools to on-the-job use or self-study. Unlike other books of its kind, it begins at a very basic level and ends at a very advanced level. It’s perfect for anyone interested in learning Autodesk Inventor quickly and effectively using a “learning by doing” approach. Additionally, the extensive videos that are included with this book make it easier than ever to learn Inventor by clearly demonstrating how to use its tools. The philosophy behind this book is that learning computer aided design programs is best accomplished by emphasizing the application of the tools. Students also seem to learn more quickly and retain information and skills better if they are actually creating something with the software program. The driving force behind this book is “learning by doing.” The instructional format of this book centers on making sure that students learn by doing and that students can learn from this book on their own. In fact, this is one thing that differentiates this book from others: the emphasis on being able to use the book for self-study. The presentation of Autodesk Inventor is structured so that no previous knowledge of any CAD program is required. This book uses the philosophy that Inventor is mastered best by concentrating on applying the program to create different types of solid models, starting simply and then using the power of the program to progressively create more complex solid models. The Drawing Activities at the end of each chapter are more complex iterations of the part developed by each chapter’s objectives. Since CAD programs are highly visual, there are graphical illustrations showing how to use the program. This reinforces the “learn by doing” philosophy since a student can see exactly what the program shows, and then step through progressive commands to implement the required operations. Rather than using a verbal description of the command, a screen capture of each command is replicated. Included Videos Each book includes access to extensive video training created by author Scott Hansen. The videos follow along with the table of contents of the book. Each chapter has one or more videos in which the author demonstrates how to use the tools that are covered in that chapter. Most videos follow an exercise from start to finish. The exercises created in the video are very similar to the exercise found in the corresponding chapter. Throughout the videos Scott Hansen describes how to perform each step, the reason behind these steps, and some of the other options available with the various tools. The author's clear and simple description of each exercise is a perfect companion to the text and makes learning Autodesk Inventor easier than ever. There are thirty-one videos with four hours and nineteen minutes of training in total. To access the videos, you will need to follow the instruction included on the inside front cover to redeem the access code included with each book. Redeeming the code will add this book to your SDC Publications Library and allow you to access the videos whenever you want.

Download or read book Autodesk Inventor 2015 and Engineering Graphics written by Randy Shih and published by SDC Publications. This book was released on 2014-06-25 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autodesk Inventor 2015 and Engineering Graphics: An Integrated Approach will teach you the principles of engineering graphics while instructing you on how to use the powerful 3D modeling capabilities of Autodesk Inventor 2015. Using step by step tutorials, this text will teach you how to create and read engineering drawings while becoming proficient at using the most common features of Autodesk Inventor. By the end you will be fully prepared to take and pass the Autodesk Inventor Certified User Exam. This text is intended to be used as a training guide for students and professionals. The chapters in this text proceed in a pedagogical fashion to guide you from constructing basic shapes to making complete sets of engineering drawings. This text takes a hands-on, exercise-intensive approach to all the important concepts of Engineering Graphics, as well as in-depth discussions of parametric feature-based CAD techniques. This textbook contains a series of fifteen chapters, with detailed step-by-step tutorial style lessons, designed to introduce beginning CAD users to the graphic language used in all branches of technical industry. This book does not attempt to cover all of Autodesk Inventor 2015’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering.

Download or read book Parametric Modeling with Autodesk Inventor 2015 written by Randy Shih and published by SDC Publications. This book was released on 2014-06-13 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parametric Modeling with Autodesk Inventor 2015 contains a series of sixteen tutorial style lessons designed to introduce Autodesk Inventor, solid modeling, and parametric modeling. It uses a hands-on, exercise-intensive approach to all the import parametric modeling techniques and concepts. The lessons guide the user from constructing basic shapes to building intelligent mechanical designs, creating multi-view drawings and assembly models. Other featured topics include sheet metal design, motion analysis, 2D design reuse, collision and contact, stress analysis and the Autodesk Inventor 2015 Certified User Examination.

Download or read book Autodesk Inventor 2017 A Tutorial Introduction written by L. Scott Hansen and published by SDC Publications. This book was released on 2016-03 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique text presents a thorough introduction to Autodesk Inventor for anyone with little or no prior experience with CAD software. It can be used in virtually any setting from four year engineering schools to on-the-job use or self-study. Unlike other books of its kind, it begins at a very basic level and ends at a very advanced level. It’s perfect for anyone interested in learning Autodesk Inventor quickly and effectively using a “learning by doing” approach. Additionally, the extensive videos that are included with this book make it easier than ever to learn Inventor by clearly demonstrating how to use its tools. The philosophy behind this book is that learning computer aided design programs is best accomplished by emphasizing the application of the tools. Students also seem to learn more quickly and retain information and skills better if they are actually creating something with the software program. The driving force behind this book is “learning by doing.” The instructional format of this book centers on making sure that students learn by doing and that students can learn from this book on their own. In fact, this is one thing that differentiates this book from others: the emphasis on being able to use the book for self-study. The presentation of Autodesk Inventor is structured so that no previous knowledge of any CAD program is required. This book uses the philosophy that Inventor is mastered best by concentrating on applying the program to create different types of solid models, starting simply and then using the power of the program to progressively create more complex solid models. The Drawing Activities at the end of each chapter are more complex iterations of the part developed by each chapter’s objectives. CAD programs are highly visual, there are graphical illustrations showing how to use the program. This reinforces the “learn by doing” philosophy since a student can see exactly what the program shows, and then step through progressive commands to implement the required operations. Rather than using a verbal description of the command, a screen capture of each command is replicated. Included Videos Each book includes access to extensive video training created by author Scott Hansen. The videos follow along with the table of contents of the book. Each chapter has one or more videos in which the author demonstrates how to use the tools that are covered in that chapter. Most videos follow an exercise from start to finish. The exercises created in the video are very similar to the exercise found in the corresponding chapter. Throughout the videos Scott Hansen describes how to perform each step, the reason behind these steps, and some of the other options available with the various tools. The author's clear and simple description of each exercise is a perfect companion to the text and makes learning Autodesk Inventor easier than ever. To access the videos you will need to follow the instruction included on the inside front cover to redeem the access code included with each book. Redeeming the code will add this book to your SDC Publications Library and allow you to access the videos whenever you want.

Download or read book AutoCAD 2015 Tutorial First Level 2D Fundamentals written by Randy Shih and published by SDC Publications. This book was released on 2014-05-30 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of AutoCAD 2015 Tutorial - First Level: 2D Fundamentals is to introduce the aspects of Computer Aided Design and Drafting (CADD). This text is intended to be used as a training guide for students and professionals. This text covers AutoCAD 2015 and the lessons proceed in a pedagogical fashion to guide you from constructing basic shapes to making multiview drawings. The lessons are further reinforced by the video presentations found on the enclosed multimedia disc. This textbook contains a series of eleven tutorial style lessons designed to introduce beginning CAD users to AutoCAD 2015. It takes a hands-on, exercise-intensive approach to all the important 2D CAD techniques and concepts. This text is also helpful to AutoCAD users upgrading from a previous release of the software. The new improvements and key enhancements of the software are incorporated into the lessons. The 2D-CAD techniques and concepts discussed in this text are also designed to serve as the foundation to the more advanced parametric feature-based CAD packages such as Autodesk Inventor. The basic premise of this book is that the more designs you create using AutoCAD 2015, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book is intended to help readers establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering.

Download or read book Mastering Autodesk Inventor 2015 and Autodesk Inventor LT 2015 Autodesk Official Press written by Curtis Waguespack and published by Serdar Hakan DÜZGÖREN. This book was released on with total page 1058 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Autodesk® Inventor® program was introduced in 1999 as an ambitious 3D parametric modeler based not on the familiar Autodesk® AutoCAD® software programming architecture but instead on a separate foundation that would provide the room needed to grow into the fully featured modeler it is now, more than a decade later. Autodesk Inventor 2015 continues the development of Autodesk Inventor with improved modeling, drawing, assembly, and visualization tools. Autodesk has set out to improve this release of Autodesk Inventor by devoting as much time and energy to improving existing tools and features as it has to adding new ones. With this book, the sixth edition of Mastering Autodesk® Inventor® 2015 and Autodesk® Inventor LT™ 2015, I have set out to update the existing pages and add new content and exercises. In these pages, you will fi nd detailed information on the specifi cs of the tools and the principles of sound parametric design techniques. Some readers will fi nd this book works best for them as a desktop reference, whereas others will use it primarily for the step-by-step tutorials. With this in mind, I’ve worked to shape the pages of this book with a mix of reference material, instructional steps, and tips and hints from the real world.

Download or read book Autodesk Inventor 2015 Tutorial written by Online Instructor and published by CreateSpace. This book was released on 2014-07-14 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This tutorial book helps you to get started with Autodesk's popular 3D modeling software using step-by-step tutorials. It starts with creating parts of an Oldham Coupling Assembly, assembling them, and then creating print ready drawings. This process gives you an overview of the design process and provides a strong base to learn additional tools and techniques. The proceeding chapters will cover additional tools related to part modelling, assemblies, sheet metal design, and drawings. Brief explanations and step-by-step tutorials help you to learn Autodesk Inventor quickly and easily. • Get an overview of the design process • Familiarize yourself with the User Interface • Teach yourself to create assembly presentations • Create custom sheet formats and templates • Learn additional part modelling tools with the help of real-world exercises • Learn to create different variations of a part • Learn Top-down assembly design and Design Accelerator • Learn to create and animate mechanical joints • Create basic sheet metal parts • Create custom punches and insert them into the sheet metal part • Create and annotate sheet metal drawings • Learn to add GD&T annotations to the drawings Downloadable tutorial and exercise file from the companion website. Table of Contents 1. Getting Started with Inventor 2015 2. Part Modeling Basics 3. Assembly Basics 4. Creating Drawings 5. Additional Modeling Tools 6. Sheet Metal Modeling 7. Top-Down Assembly and Motion Simulation 8. Dimensions and Annotations

Download or read book Mastering Autodesk Inventor 2016 and Autodesk Inventor LT 2016 written by Paul Munford and published by John Wiley & Sons. This book was released on 2016-01-05 with total page 1094 pages. Available in PDF, EPUB and Kindle. Book excerpt: Your real-world introduction to mechanical design with Autodesk Inventor 2016 Mastering Autodesk Inventor 2016 and Autodesk Inventor LT 2016 is a complete real-world reference and tutorial for those learning this mechanical design software. With straightforward explanations and practical tutorials, this guide brings you up to speed with Inventor in the context of real-world workflows and environments. You'll begin designing right away as you become acquainted with the interface and conventions, and then move into more complex projects as you learn sketching, modeling, assemblies, weldment design, functional design, documentation, visualization, simulation and analysis, and much more. Detailed discussions are reinforced with step-by-step tutorials, and the companion website provides downloadable project files that allow you to compare your work to the pros. Whether you're teaching yourself, teaching a class, or preparing for the Inventor certification exam, this is the guide you need to quickly gain confidence and real-world ability. Inventor's 2D and 3D design features integrate with process automation tools to help manufacturers create, manage, and share data. This detailed guide shows you the ins and outs of all aspects of the program, so you can jump right in and start designing with confidence. Sketch, model, and edit parts, then use them to build assemblies Create exploded views, flat sheet metal patterns, and more Boost productivity with data exchange and visualization tools Perform simulations and stress analysis before the prototyping stage This complete reference includes topics not covered elsewhere, including large assemblies, integrating other CAD data, effective modeling by industry, effective data sharing, and more. For a comprehensive, real-world guide to Inventor from a professional perspective, Mastering Autodesk Inventor 2016 and Autodesk Inventor LT 2016 is the easy-to-follow hands-on training you've been looking for.

Download or read book Tools for Design Using AutoCAD 2015 and Autodesk Inventor 2015 written by Randy Shih and published by SDC Publications. This book was released on 2014-06-25 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tools for Design is intended to provide the user with an overview of computer aided design using two popular CAD software packages from Autodesk: AutoCAD and Autodesk Inventor. This book explores the strengths of each package and show how they can be used in design, both separately and in combination with each other. What you'll learn How to create and dimension 2D multiview drawings using AutoCAD How to freehand sketch using axonometric, oblique and perspective projection techniques How to create 3D parametric models and 2D multiview drawings using Autodesk Inventor How to reuse design information between AutoCAD and Autodesk Inventor How to combine parts into assemblies including assembly modeling with a LEGO® MINDSTORMS® Education Base Set with TETRIX® kit and a VEX Robot Kit How to perform basic finite element stress analysis using Inventor Stress Analysis Module Who this book is for This book is designed for high school and college age students wanting to learn the fundamentals of computer aided design with AutoCAD and Inventor and how the two can be used together. No prior CAD experience is required.