Download or read book Residential Design Using AutoCAD 2013 written by Daniel John Stine and published by SDC Publications. This book was released on 2012-04-27 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residential Design Using AutoCAD 2013 is an introductory level tutorial which uses residential design exercises as the means to teach you AutoCAD 2013. Each book comes with a DVD containing numerous video presentations in which the author shows and explains the many tools and techniques used in AutoCAD 2013. After completing this book you will have a well-rounded knowledge of Computer Aided Drafting that can be used in the industry and the satisfaction of having completed a set of residential drawings. This textbook starts with an optional section that covers basic hand sketching techniques and concepts intended to increase your ability to sketch design ideas by hand and to think three-dimensionally. The book then proceeds with a basic introduction to AutoCAD 2013. The first three chapters are intended to get you familiar with the user interface and many of the common menus and tools. Throughout the rest of the book you will design a residence through to its completion. Using step-by-step tutorial lessons, the residential project is followed through to create elevations, sections, details, etc. Throughout the project, new AutoCAD commands are covered at the appropriate time. Focus is placed on the most essential parts of a command rather than an exhaustive review of every sub-feature of a particular command. The Appendix contains a bonus section covering the fundamental principles of engineering graphics that relate to architecture.
Download or read book AutoCAD 2013 for the Interior Designer written by Dean Muccio and published by SDC Publications. This book was released on 2012 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focused around a hotel suite project, AutoCAD 2013 for the Interior Designer provides the Interior Design student with a non-intimidating, tutorial based, approach to learning the AutoCAD program. It accomplishes this by taking students that have no computer design experience from simple commands to complete projects in this single-semester sized text. This well organized and progressive approach to learning AutoCAD sets this text apart from others. The emphasis of this book is on easy to understand descriptions and instructions, allowing the non-technical, artistic, visual learning Interior Design student to quickly get past the fear of using the computer to produce drawings. The focus is entirely on the use of AutoCAD for the Interior Design field and not simply architectural drawings. Chapters alternate between command descriptions, which are organized by a command set category, and tutorials. This allows students to easily refer back to command descriptions without hunting through a tutorial that introduces commands as it progresses. The emphasis is on the practical use of commands using the AutoCAD ribbon workspace, rather than the multiple (and seldom used) command options. Multiple tutorials of the hotel suite, which includes floor plan, elevation views, dimensioning, and plotting, provide a practical application of the commands learned in the preceding chapters. Completely dimensioned drawings are provided at the beginning of each tutorial so that the advanced student, or an instructor led class, can complete them without going through the step-by-step process. This textbook is classroom proven and relevant interior design homework problems are provided. After completing this book, the student will be able to create all their 2-D Interior Design work using AutoCAD.
Download or read book AutoCAD 2018 for the Interior Designer written by Dean Muccio and published by SDC Publications. This book was released on 2017-05 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focused around a hotel suite project, AutoCAD 2018 for the Interior Designer provides the Interior Design student with a non-intimidating, tutorial based, approach to learning the AutoCAD program. It accomplishes this by taking students that have no computer design experience from simple commands to complete projects in this single-semester sized text. This well organized and progressive approach to learning AutoCAD sets this text apart from others. To support all users, this book now covers AutoCAD for both Macs and PCs. The emphasis of this book is on easy to understand descriptions and instructions, allowing the non-technical, artistic, visual learning Interior Design student to quickly get past the fear of using the computer to produce drawings. The focus is entirely on the use of AutoCAD for the Interior Design field and not simply architectural drawings. Chapters alternate between command descriptions, which are organized by a command set category, and tutorials. This allows students to easily refer back to command descriptions without hunting through a tutorial that introduces commands as it progresses. The emphasis is on the practical use of commands using the AutoCAD ribbon workspace, rather than the multiple (and seldom used) command options. Multiple tutorials of the hotel suite, which includes floor plan, elevation views, dimensioning, and plotting, provide a practical application of the commands learned in the preceding chapters. Completely dimensioned drawings are provided at the beginning of each tutorial so that the advanced student, or an instructor led class, can complete them without going through the step-by-step process. This textbook is classroom proven, and relevant interior design homework problems are provided. After completing this book, the student will be able to create all their 2-D Interior Design work using AutoCAD.
Download or read book AutoCAD 2021 for the Interior Designer written by Dean Muccio and published by SDC Publications. This book was released on 2020-04 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focused around a hotel suite project, AutoCAD 2021 for the Interior Designer provides the Interior Design student with a non-intimidating, tutorial based approach to learning the AutoCAD program. It accomplishes this by taking students that have no computer design experience from simple commands to complete projects in this single-semester sized text. This well organized and progressive approach to learning AutoCAD sets this text apart from others. To support all users, this book covers AutoCAD for both Macs and PCs. The emphasis of this book is on easy to understand descriptions and instructions, allowing the non-technical, artistic, visual learning Interior Design student to quickly get past the fear of using the computer to produce drawings. The focus is entirely on the use of AutoCAD for the Interior Design field and not simply architectural drawings. Chapters alternate between command descriptions, which are organized by a command set category, and tutorials. This allows students to easily refer back to command descriptions without hunting through a tutorial that introduces commands as it progresses. The emphasis is on the practical use of commands using the AutoCAD ribbon workspace, rather than the multiple (and seldom used) command options. Multiple tutorials of the hotel suite, which includes floor plan, elevation views, dimensioning, and plotting, provide a practical application of the commands learned in the preceding chapters. Completely dimensioned drawings are provided at the beginning of each tutorial so that the advanced student, or an instructor led class, can complete them without going through the step-by-step process. This textbook is classroom proven, and relevant interior design homework problems are provided. After completing this book, the student will be able to create all their 2-D Interior Design work using AutoCAD.
Download or read book AutoCAD 2020 for the Interior Designer written by Dean Muccio and published by SDC Publications. This book was released on with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focused around a hotel suite project, AutoCAD 2020 for the Interior Designer provides the Interior Design student with a non-intimidating, tutorial based approach to learning the AutoCAD program. It accomplishes this by taking students that have no computer design experience from simple commands to complete projects in this single-semester sized text. This well organized and progressive approach to learning AutoCAD sets this text apart from others. To support all users, this book now covers AutoCAD for both Macs and PCs. The emphasis of this book is on easy to understand descriptions and instructions, allowing the non-technical, artistic, visual learning Interior Design student to quickly get past the fear of using the computer to produce drawings. The focus is entirely on the use of AutoCAD for the Interior Design field and not simply architectural drawings. Chapters alternate between command descriptions, which are organized by a command set category, and tutorials. This allows students to easily refer back to command descriptions without hunting through a tutorial that introduces commands as it progresses. The emphasis is on the practical use of commands using the AutoCAD ribbon workspace, rather than the multiple (and seldom used) command options. Multiple tutorials of the hotel suite, which includes floor plan, elevation views, dimensioning, and plotting, provide a practical application of the commands learned in the preceding chapters. Completely dimensioned drawings are provided at the beginning of each tutorial so that the advanced student, or an instructor led class, can complete them without going through the step-by-step process. This textbook is classroom proven, and relevant interior design homework problems are provided. After completing this book, the student will be able to create all their 2-D Interior Design work using AutoCAD.
Download or read book Autodesk AutoCAD 2013 written by and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to AutoCAD 2021 for Civil Engineering Applications written by Nighat Yasmin and published by SDC Publications. This book was released on 2020-09 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is an old saying that an engineer describes every idea with a drawing. With the advances in computer technology and drawing software, it has never been easier, or more important, to learn computer aided design. To be effective, however, a drawing must accurately convey your intended meaning and that requires more than just knowing how to use software. This book provides you with a clear presentation of the theory of engineering graphics and the use of AutoCAD 2021 as they pertain to civil engineering applications. This combination of theory and its practical application will give you the knowledge and skills necessary to create designs that are accurate and easily understood by others. Each chapter starts with a bulleted list of chapter objectives followed by an introduction. This provides you with a general overview of the material that will be covered in the chapter. The contents of each chapter are organized into well-defined sections that contain step-by-step instructions and illustrations to help you learn to use the various AutoCAD commands. More importantly, you will also learn how and why you would use these tools in real world projects. This book has been categorized and ordered into 12 parts: • Introduction to AutoCAD 2021 ribbon interface (1-7) • Dimensioning and tolerancing using AutoCAD 2021 (8-9) • Use of AutoCAD in land survey data plotting (10-11) • The use of AutoCAD in hydrology (12-13) • Transportation engineering and AutoCAD (14-15) • AutoCAD and architecture technology (16-18) • Introduction to working drawings (19) • Plotting from AutoCAD (20) • External Reference Files - Xref (21) • Suggested drawing problems (22-23) • Bibliography • Index
Download or read book AutoCAD 2013 for Interior Design and Space Planning written by Beverly M. Kirkpatrick and published by Prentice Hall. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: AutoCAD 2013 for Interior Design and Space Planning helps students understand the commands and features of AutoCAD 2013 and demonstrates how to use the program to complete interior design and space planning projects. Covering both two- and three-dimensional drawings, the text provides abundant exercises that walk students step-by-step through the use of AutoCAD prompts and commands. Using numerous illustrations, the text captures the essence of this powerful program and the importance it plays in the interior design, architecture and space planning professions.
Download or read book Autocad 2009 for Interior Design written by Zane D. Curry and published by Prentice Hall. This book was released on 2009 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'AutoCAD 2009 for Interior Design' provides students with the necessary experience and practice to produce and illustrate complex 3D interior components and furnished spaces in an amount of time that will allow additional studio projects to be completed in the course of one semester.
Download or read book Interior Design Illustrated written by Francis D. K. Ching and published by John Wiley & Sons. This book was released on 2012-02-20 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a concise and accessible presentation of important concepts for beginning designers, and experienced practitioners will appreciate its insightful and practical coverage of the relationship between building structures and interior spaces. A broad range of rich illustrations communicates visual information and ploughs fertile ground for creative ideas and inspiration.
Download or read book Commercial Design Using AutoCAD 2013 written by Daniel John Stine and published by SDC Publications. This book was released on 2012-06-29 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Commercial Design Using AutoCAD 2013 is designed for the architectural student using AutoCAD 2013. The intent is to provide the student with a well-rounded knowledge of tools and techniques for use in both school and industry. This text takes a project based approach to learning AutoCAD in which the student develops a campus library. Each book comes with a CD containing numerous video presentations of the written material. The first two chapters are intended to get the reader familiar with the user interface as well as the most common menus, tools and commands that are required to work effectively with AutoCAD 2013. By the end of chapter two the student will be excited and prepared to take on a much larger project. Throughout the rest of the book the student develops the campus library. Using step-by-step tutorial lessons, the library project is followed through to create FFE plans, interior elevations, schedules, and details. In these chapters many of the additional tools and features of AutoCAD 2013 are covered in greater detail. General building codes and industry standard conventions are covered in a way that is applicable to the current exercise.
Download or read book Photoshop for Interior Designers written by Suining Ding and published by Bloomsbury Publishing USA. This book was released on 2013-10-31 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoshop for Interior Designers introduces step-by-step techniques for interior designers to successfully use Adobe Photoshop to visually communicate their design concept through graphic images and to illustrate design ideas through a visual thinking process. Instructions show how to integrate hand drawings and freehand sketches into digital drawings. Basic and advanced techniques presented include creating floor plans and elevations, preparing perspectives or isometric drawings, and applying materials, lightings, background and entourages for interior design presentations. Taking a multi-media approach, the text demonstrates how to use Photoshop to refine and modify drawings created in Google Sketchup, AutoCAD and other 3D software programs, and introduces how to use InDesign to seamlessly create graphic layouts for presentation to clients. Editable digital files for students to use to complete the projects at the end of chapters are on the book's companion website located at http://www.bloomsbury.com/us/photoshop-for-interior-designers-9781609015442/. They can also be found at https://www.fairchildbooks.com/studio-resources.
Download or read book AutoCAD 2013 For Dummies written by Bill Fane and published by John Wiley & Sons. This book was released on 2012-04-11 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bring your design vision to life with this full-color guide to AutoCAD 2013! Used by everyone from engineers and architects to interior designers and draftspeople, AutoCAD 2013 is the world’s leading 2D and 3D technical drawing program. But, with so many options and features available, finding your way around AutoCAD can be a challenge, even for experienced CAD professionals. AutoCAD 2013 For Dummies is here to help. You’ll learn to build a solid foundation for all your projects, use standard CAD techniques, get familiar with new tools and features, and start sharing your models and designs in no time with this easy-to-follow guide. Covers the latest AutoCAD features and techniques, including creating a basic layout, navigating the AutoCAD Ribbon, drawing and editing, working with dimensions, adding text, creating 3D models, and more Walks readers through setting up a drawing environment, applying visual styles, managing data across several drawings, and showcasing your designs to potential clients and customers Features full-color illustrations that mirror what you’ll see on your AutoCAD 2013 screens plus a companion website with downloadable drawing files so you can put your CAD skills to the test Whether you’re an AutoCAD amateur or a modeling master, AutoCAD 2013 For Dummies has something for you.
Download or read book Digital Drawing for Designers A Visual Guide to AutoCAD 2017 written by Douglas R. Seidler and published by Bloomsbury Publishing USA. This book was released on 2016-07-28 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: AutoCAD continues to dominate the two-dimensional drafting marketplace for architects and interior designers. Digital Drawing for Designers: A Visual Guide to AutoCAD 2017 is designed to help this community by visually teaching for step-by-step understanding. Beginning with the building blocks of drawing (lines, circles, and arcs), the book progresses through architectural graphic standards, enabling students to create presentation and construction drawings that effectively communicate their design ideas. Advanced features such as annotative dimensions, annotative blocks, express tools, and linking drawings (XREFs) are also covered. Instructions are illustrated using language and concepts from manual drafting, facilitating a smooth transition to the digital environment for all designers. New learners will appreciate the step-by-step lessons and visual illustrations, while experienced design professionals can easily access material to refresh their knowledge. Clear, concise, and above all visual, this AutoCAD guide speaks directly to the needs of architects and interior designers.
Download or read book AutoCAD 2013 and AutoCAD LT 2013 Bible written by Ellen Finkelstein and published by John Wiley & Sons. This book was released on 2012-06-14 with total page 1294 pages. Available in PDF, EPUB and Kindle. Book excerpt: The bestselling guide to AutoCAD, fully updated for the 2013 version AutoCAD, the number one architectural drawing software, can be challenging to learn. This comprehensive guide has sold more than 160,000 copies in previous editions and is the go-to resource for architects, engineers, drafters, interior designers, and space planners who need to learn and use AutoCAD and AutoCAD LT. From the basics of creating drawings and using commands to 2D and 3D drawing techniques, using layers, rendering, and customizing the program, this book covers it all. A Quick Start guide allows even newcomers to create an actual drawing on their very first day. Expert AutoCAD author Ellen Finkelstein presents more than 150 tutorials illustrated with real-world drawings from AutoCAD pros. The companion website includes before-and-after drawings, bonus chapters, video tutorials, and more! The comprehensive, soup-to-nuts reference that even some Autodesk employees keep on their desks Covers AutoCAD and AutoCAD LT in complete detail, from using the interface and commands to customizing and programming AutoCAD with AutoLISP and VBA Begins with a Quick Start guide to help novices create a real drawing on their first day with the program Covers creating drawings, using commands, and specifying coordinates; working with complex 2D and 3D drawing techniques; using layers; and creating dimensions, 3D coordinates, solids, and rendering Discusses customizing commands and toolbars and programming AutoCAD with AutoLISP and VBA Includes a companion website with bonus content, video tutorials, and before-and-after drawings AutoCAD 2013 and AutoCAD LT 2013 Bible is the comprehensive, one-stop AutoCAD resource for newcomers and veterans alike.
Download or read book Autocad 2014 Tutorial Second Level written by Randy Shih and published by SDC Publications. This book was released on 2013 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of AutoCAD 2014 Tutorial - Second Level: 3D Modeling is to introduce the aspects of computer based three dimensional modeling. This text is intended to be used as a training guide for both students and professionals. The chapters in this book cover AutoCAD 2014 and proceed in a pedagogical fashion to guide you from constructing 3D wire frame models, 3D surface models, and 3D solid models to making multiview drawings and rendering images. The text takes a hands-on, exercise-intensive approach to all the important 3D modeling techniques and concepts. This book contains a series of twelve tutorial style chapters designed to introduce CAD users to 3D modeling with AutoCAD 2014. Users upgrading from a previous release of the AutoCAD software will also find this text helpful. The basic premise of this book is that the more 3D designs you create using AutoCAD 2014 the better you learn the software. With this in mind each tutorial introduces a new set of commands and concepts, building on previous chapters. By going through this book readers will establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering.
Download or read book Mastering AutoCAD 2013 and AutoCAD LT 2013 written by George Omura and published by John Wiley & Sons. This book was released on 2012-05-22 with total page 1336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complete tutorial and reference to the world's leading CAD program This thoroughly revised and updated edition teaches AutoCAD using explanations, examples, instructions, and hands-on projects for both AutoCAD and AutoCAD LT. This detailed resource works as both a tutorial and stand-alone reference. It introduces the basics of the interface and drafting tools; explores skills such as using hatches, fields, and tables; details such advanced skills as attributes, dynamic blocks, drawing curves, and using solid fills; explains 3D modeling and imaging; and discusses customization and integration. Covers all the new AutoCAD capabilities Written by George Omura, a popular AutoCAD author Offers an essential resource for those preparing for the AutoCAD certification program Includes a DVD with all the project files necessary for the tutorials, a trial version of AutoCAD, and additional tools and utilities George Omura's engaging writing style makes this reference the perfect reference and tutorial for both novice and experienced CAD users. Note: CD-ROM/DVD and other supplementary materials are not included as part of the e-book file, but are available for download after purchase.