Download or read book Elements of Metallurgy and Engineering Alloys written by Flake C. Campbell and published by ASM International. This book was released on 2008-01-01 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical reference provides thorough and systematic coverage on both basic metallurgy and the practical engineering aspects of metallic material selection and application.

Download or read book Heat Treater s Guide written by Harry Chandler and published by ASM International. This book was released on 1994-12-31 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition is a complete revision and contains a great deal of new subject matter including information on ferrous powder metallurgy, cast irons, ultra high strength steels, furnace atmospheres, quenching processes, SPC and computer technology. Data on over 135 additional irons and steels have been added to the previously-covered 280 alloys.

Download or read book Wear of Materials written by Peter J. Blau and published by Elsevier. This book was released on 2003-10 with total page 1540 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 14th International Conference on Wear of Materials took place in Washington, DC, USA, 30 March - 3 April 2003. These proceedings contain over two-hundred peer reviewed papers containing the best research, technical developments and engineering case studies from around the world. Biomaterials and nano-tribology receive special attention in this collection reflecting the general trends in the field. Further highlights include a focus on the new generation of instrumentation to probe wear at increasingly small scales. Approximately ninety communications and case studies, a popular format for the academic community have also been included, enabling the inclusion of the most up-to-date research. Over 200 peer-reviewed papers including hot topics such as biomaterials and nano-tribology Keeping you up-to-date with the latest research from leading experts Includes communications and case studies

Download or read book Heat Treating written by Kiyoshi Funatani and published by ASM International. This book was released on 2000-01-01 with total page 1214 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Practical Heat Treating written by Jon L. Dossett and published by ASM International. This book was released on 2006-01-01 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: What is heat treatment? This book describes heat treating technology in clear, concise, and nontheoretical language. It is an excellent introduction and guide for design and manufacturing engineers, technicians, students, and others who need to understand why heat treatment is specified and how different processes are used to obtain desired properties. The new Second Edition has been extensively updated and revised by Jon. L. Dossett, who has more than forty years of experience in theat treating operations and management. The update adds important information about new processes and process control techniques that have been developed or refined in recent years. Helpfull appendices have been added on decarburization of steels, boost/diffues cycles for carburizing, and process verification.

Download or read book Steel Heat Treatment written by George E. Totten and published by CRC Press. This book was released on 2006-09-28 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of two self-contained volumes belonging to the newly revised Steel Heat Treatment Handbook, Second Edition, this book examines the behavior and processes involved in modern steel heat treatment applications. Steel Heat Treatment: Metallurgy and Technologies presents the principles that form the basis of heat treatment processes while incorporating detailed descriptions of advances emerging since the 1997 publication of the first edition. Revised, updated, and expanded, this book ensures up-to-date and thorough discussions of how specific heat treatment processes and different alloy elements affect the structure and the classification and mechanisms of steel transformation, distortion of properties of steel alloys. The book includes entirely new chapters on heat-treated components, and the treatment of tool steels, stainless steels, and powder metallurgy steel components. Steel Heat Treatment: Metallurgy and Technologies provides a focused resource for everyday use by advanced students and practitioners in metallurgy, process design, heat treatment, and mechanical and materials engineering.

Download or read book Steel Heat Treatment Handbook 2 Volume Set written by George E. Totten and published by CRC Press. This book was released on 2006-11-14 with total page 1571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference presents the classical perspectives that form the basis of heat treatment processes while incorporating descriptions of the latest advances to impact this enduring technology. The second edition of the bestselling Steel Heat Treatment Handbook now offers abundantly updated and extended coverage in two self-contained volumes:

Download or read book Principles of heat treatment of steels written by Romesh C. Sharma and published by New Age International. This book was released on 2003 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Treatment Of Steels As An Art To Improve Their Service Performance Has Been Practised Ever Since It Started To Be Used As Tools And Weapons.However, The Scientific Basis Of Heat Treatment Of Steels Became More Apparent Only In The First Half Of This Century And Still Some Gaps Remain In Its Complete Understanding.Earlier Books On Heat Treatment Of Steels Mainly Emphasised The Art And The Empirically Arrived Principles Of Heat Treatment. In The Last Few Decades, Our Understanding Of Phase Transformations And Mechanical Behaviour Of Steels, And Consequently Of Heat Treatment Of Steels, Has Considerably Increased.In This Book On Principles Of Heat Treatment Of Steels The Emphasis Is On The Scientific Principles Behind The Various Heat Treatment Processes Of Steels. Though It Is Expected That The Reader Has Sufficient Background In Phase Transformations And Mechanical Behaviour Of Materials, First Few Chapters Review These Topics With Specific Reference To Steels. Basic Principles Of Various Heat Treatment Processes Of Steels Including Surface Hardening Processes, Are Then Covered In Sufficient Detail To Give A Good Overall Understanding Of These Processes. The Detail Engineering Aspects Are, However, Omitted. These Are Easily Available In Various Handbooks On Heat Treatment. The Book Also Covers Heat Treatment Of Tool Steels And Cast Irons.The Book Has Been Well Written And Can Be Used A Textbook On Heat Treatment For Undergraduate Students. It Is Also A Good Reference Book For Teachers And Researchers In This Area And Engineers In The Industry.

Download or read book Encyclopedia of Iron Steel and Their Alloys Online Version written by George E. Totten and published by CRC Press. This book was released on 2016-01-06 with total page 3918 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]

Download or read book Current Advances in Mechanical Design Production IV written by Y. H. Kabil and published by Elsevier. This book was released on 2017-05-04 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an overview of the state of the art in mechanical design and production. Both basic and applied research papers highlight recent trends, techniques and case studies in two major fields: analysis and design of mechanical systems and components; production and industrial engineering. This volume also includes all the invited keynote lectures presented at the conference. Contains 73 papers.

Download or read book Nondestructive Characterization of Materials written by Paul Höller and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering structures for reliable function and safety have to be designed such that operational mechanical loads are compensated for by stresses in the components bearable by the materials used. Vhat is "bearable"? First of all it depends on the properties of the chosen materials as well as on several other parameters, e.g. temperature, corrosivity of the environment, elapsed or remaining serviceable life, unexpected deterioration of materials, whatever the source and nature of such deterioration may be: defects, loss of strength, embrittlement, wastage, etc. DEFECTS and PROPERTIES of materials currently determine loadability. Therefore in addition to nondestructive testing for defects there is also a need for nondestructive testing of properties. The third type of information to be supplied by nondestructive measurement pertains to STRESS STATES under OPERATIONAL LOADS, i.e. LOAD-INDUCED plus RESIDUAL STRESSES. Residual stresses normally cannot be calculated; they have to be measured nondestructively; well-approved elastomechanical finite element codes are available and used for calculating load-induced stresses; for redundancy and reliability, engineers, however, need procedures and instrumentation for experimental checks.

Download or read book Shape Casting written by Murat Tiryakioǧlu and published by John Wiley & Sons. This book was released on 2013-12-30 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers on the science, engineering, andtechnology of shape castings, with contributions from researchersworldwide. Among the topics that are addressed arestructure-property-performance relationships, modeling of castingprocesses, and the effect of casting defects on the mechanicalproperties of cast alloys.

Download or read book Structural Materials and Processes in Transportation written by Dirk Lehmhus and published by John Wiley & Sons. This book was released on 2013-08-07 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lightness, efficiency, durability and economic as well as ecological viability are key attributes required from materials today. In the transport industry, the performance needs are felt exceptionally strongly. This handbook and ready reference covers the use of structural materials throughout this industry, particularly for the road, air and rail sectors. A strong focus is placed on the latest developments in materials engineering. The authors present new insights and trends, providing firsthand information from the perspective of universities, Fraunhofer and independent research institutes, aerospace and automotive companies and suppliers. Arranged into parts to aid the readers in finding the information relevant to their needs: * Metals * Polymers * Composites * Cellular Materials * Modeling and Simulation * Higher Level Trends

Download or read book Tool and Manufacturing Engineers Handbook Materials Finishing and Coating written by Charles Wick and published by Society of Manufacturing Engineers. This book was released on 1985-12-09 with total page 839 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 3 helps you and your production team use new materials, choose the most efficient surface and edge preparation techniques, and apply coatings that enhance the appearance and performance of your final product. You'll use this book to analyze the machinability, formability and weldability of your materials, and to help assess heat treatment systems, coating processes and materials, application and curing methods, and more.

Download or read book Heat Treating Including Steel Heat Treating In the New Millennium written by Sandra J. Midea and published by ASM International. This book was released on 2000-01-01 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers from a November 1999 meeting examine heat treating and associated industries, touching on aspects of control of microstructure through heat treatment, equipment and processes, forge heating with induction, quenching and distortion, and steel heat treating in the new millennium. Subjects inclu

Download or read book Metals Advances in Research and Application 2012 Edition written by and published by ScholarlyEditions. This book was released on 2012-12-26 with total page 1893 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals—Advances in Research and Application: 2012 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Metals. The editors have built Metals—Advances in Research and Application: 2012 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Metals in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Metals—Advances in Research and Application: 2012 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book Advances in Metrology and Measurement of Engineering Surfaces written by Chander Prakash and published by Springer Nature. This book was released on 2020-06-15 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the International Conference on Functional Material, Manufacturing and Performances (ICFMMP) 2019. The book covers broad aspects of several topics involved in the metrology and measurement of engineering surfaces and their implementation in automotive, bio-manufacturing, chemicals, electronics, energy, construction materials, and other engineering applications. The contents focus on cutting-edge instruments, methods and standards in the field of metrology and mechanical properties of advanced materials. Given the scope of the topics, this book can be useful for students, researchers and professionals interested in the measurement of surfaces, and the applications thereof.