Download or read book Auger Electron Spectroscopy Study of Surface Segregation in the Binary Alloys Copper 1 Atomic Percent Indium Copper 2 Atomic Percent Tin and Iron 6 55 Atomic Pecent Silicon written by John Ferrante and published by . This book was released on 1973 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Auger Electron Spectroscopy Study of Surface Segregation in the Binary Alloys Copper 1 Atomic Percent Indium Copper 2 Atomic Percent Tin and Iron 6 55 Atomic Percent Silicon written by John Ferrante and published by . This book was released on 1973 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Auger electron spectroscopy was used to examine surface segregation in the binary alloys copper-1 at. % indium, copper-2 at. % tin and iron-6.55 at. % silicon. The copper-tin and copper-indium alloys were single crystals oriented with the /111/ direction normal to the surface. An iron-6.5 at. % silicon alloy was studied (a single crystal oriented in the /100/ direction for study of a (100) surface). It was found that surface segregation occurred following sputtering in all cases. Only the iron-silicon single crystal alloy exhibited equilibrium segregation (i.e., reversibility of surface concentration with temperature) for which at present we have no explanation. McLean's analysis for equilibrium segregation at grain boundaries did not apply to the present results, despite the successful application to dilute copper-aluminum alloys. The relation of solute atomic size and solubility to surface segregation is discussed. Estimates of the depth of segregation in the copper-tin alloy indicate that it is of the order of a monolayer surface film.
Download or read book An auger electron spectroscopy study of surface segregation in a 5 at A1 Fe alloy written by Mary Anton and published by . This book was released on 1983 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Auger Electron Spectroscopy written by C.L. Briant and published by Elsevier. This book was released on 2012-12-02 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Materials Science and Technology, Volume 30: Auger Electron Spectroscopy examines Auger electron spectroscopy and its various uses, emphasizing both theoretical and experimental studies. This book discusses the historical development of auger electron spectroscopy, studies of surface segregation kinetics by auger electron spectroscopy, and local electronic structure information in auger electron spectroscopy. The metallurgical applications of auger electron spectroscopy and auger photoelectron coincidence spectroscopy are also elaborated. Other topics include the measurement of surface segregation kinetics by Auger electron spectroscopy, tempered martensite embrittlement, embrittlement of nonferrous alloys, and analysis of particle-matrix interfaces. The high-resolution scanning Auger electron spectroscopy, corrosion and stress corrosion cracking, and APECS instrumentation are likewise covered in this publication. This volume is suitable for researchers and electrical engineering students conducting work on Auger electron spectroscopy.
Download or read book An Introduction to Surface Analysis by XPS and AES written by John F. Watts and published by John Wiley & Sons. This book was released on 2019-08-27 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a concise yet comprehensive introduction to XPS and AES techniques in surface analysis This accessible second edition of the bestselling book, An Introduction to Surface Analysis by XPS and AES, 2nd Edition explores the basic principles and applications of X-ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES) techniques. It starts with an examination of the basic concepts of electron spectroscopy and electron spectrometer design, followed by a qualitative and quantitative interpretation of the electron spectrum. Chapters examine recent innovations in instrument design and key applications in metallurgy, biomaterials, and electronics. Practical and concise, it includes compositional depth profiling; multi-technique analysis; and everything about samples—including their handling, preparation, stability, and more. Topics discussed in more depth include peak fitting, energy loss background analysis, multi-technique analysis, and multi-technique profiling. The book finishes with chapters on applications of electron spectroscopy in materials science and the comparison of XPS and AES with other analytical techniques. Extensively revised and updated with new material on NAPXPS, twin anode monochromators, gas cluster ion sources, valence band spectra, hydrogen detection, and quantification Explores key spectroscopic techniques in surface analysis Provides descriptions of latest instruments and techniques Includes a detailed glossary of key surface analysis terms Features an extensive bibliography of key references and additional reading Uses a non-theoretical style to appeal to industrial surface analysis sectors An Introduction to Surface Analysis by XPS and AES, 2nd Edition is an excellent introductory text for undergraduates, first-year postgraduates, and industrial users of XPS and AES.
Download or read book Electron Spectroscopy Studies of Surface Segregation in Selected Binary Alloys and Surface Composition of Oxidized Copper Solar Absorbers written by Sven Erik Hörnström and published by . This book was released on 1986 with total page 39 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Study of Copper Segregation in Sputtered Al Si Cu Films Using Auger Electron Spectroscopy written by M. A. Green and published by . This book was released on 1991 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Analysis written by John C. Vickerman and published by John Wiley & Sons. This book was released on 2011-08-10 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: This completely updated and revised second edition of Surface Analysis: The Principal Techniques, deals with the characterisation and understanding of the outer layers of substrates, how they react, look and function which are all of interest to surface scientists. Within this comprehensive text, experts in each analysis area introduce the theory and practice of the principal techniques that have shown themselves to be effective in both basic research and in applied surface analysis. Examples of analysis are provided to facilitate the understanding of this topic and to show readers how they can overcome problems within this area of study.
Download or read book Physical Metallurgy Principles written by Robert E. Reed-Hill and published by Van Nostrand Reinhold Company. This book was released on 1973 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Covers all aspects of physical metallurgy and behavior of metals and alloys. * Presents the principles on which metallurgy is based. * Concepts such as heat affected zone and structure-property relationships are covered. * Principles of casting are clearly outlined in the chapter on solidification. * Advanced treatment on physical metallurgy provides specialized information on metals.
Download or read book Specimen Handling Preparation and Treatments in Surface Characterization written by Alvin W. Czanderna and published by Springer Science & Business Media. This book was released on 1998 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for professionals, researchers, technicians and students who are newcomers to the field as well as those with experience. It will be an important resource in the following fields: surface science, electronic materials and processes, thin film deposition, surface compositional analysis and related topical areas such as corrosion, oxidation, reduction, adsorption, desorption, adhesion, epitaxial growth and contamination. The presentation uses a tutorial and pedagogical approach.
Download or read book Surface Analysis by Auger and X ray Photoelectron Spectroscopy written by David Briggs and published by Im Publications. This book was released on 2003-01-01 with total page 899 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanoalloys written by Florent Calvo and published by Elsevier. This book was released on 2020-07-10 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoalloys, Second Edition, provides a self-contained reference on the physics and chemistry of nanoscale alloys, dealing with all important aspects that range from the theoretical concepts and the practical synthesis methods to the characterization tools. The book also covers modern applications of nanoalloys in materials science, catalysis or nanomedicine and discusses their possible toxicity. Covers fundamentals and applicative aspects of nanoalloys in a balanced presentation, including theoretical and experimental perspectives Describes physical and chemical approaches, synthesis and characterization tools Illustrates the potential benefit of alloying on various applications ranging from materials science to energy production and nanomedicine Updates and adds topics not fully developed at the time of the 1st edition, such as toxicity and energy applications
Download or read book Reflow Soldering Processes written by Ning-Cheng Lee and published by Newnes. This book was released on 2002-01-11 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focused on technological innovations in the field of electronics packaging and production, this book elucidates the changes in reflow soldering processes, its impact on defect mechanisms, and, accordingly, the troubleshooting techniques during these processes in a variety of board types. Geared toward electronics manufacturing process engineers, design engineers, as well as students in process engineering classes, Reflow Soldering Processes and Troubleshooting will be a strong contender in the continuing skill development market for manufacturing personnel. Written using a very practical, hands-on approach, Reflow Soldering Processes and Troubleshooting provides the means for engineers to increase their understanding of the principles of soldering, flux, and solder paste technology. The author facilitates learning about other essential topics, such as area array packages--including BGA, CSP, and FC designs, bumping technique, assembly, and rework process,--and provides an increased understanding of the reliability failure modes of soldered SMT components. With cost effectiveness foremost in mind, this book is designed to troubleshoot errors or problems before boards go into the manufacturing process, saving time and money on the front end. The author's vast expertise and knowledge ensure that coverage of topics is expertly researched, written, and organized to best meet the needs of manufacturing process engineers, students, practitioners, and anyone with a desire to learn more about reflow soldering processes. Comprehensive and indispensable, this book will prove a perfect training and reference tool that readers will find invaluable. Provides engineers the cutting-edge technology in a rapidly changing field Offers in-depth coverage of the principles of soldering, flux, solder paste technology, area array packages--including BGA, CSP, and FC designs, bumping technique, assembly, and the rework process
Download or read book Electrochemistry of Metal Chalcogenides written by Mirtat Bouroushian and published by Springer Science & Business Media. This book was released on 2010-04-23 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author provides a unified account of the electrochemical material science of metal chalcogenide (MCh) compounds and alloys with regard to their synthesis, processing and applications. Starting with the chemical fundamentals of the chalcogens and their major compounds, the initial part of the book includes a systematic description of the MCh solids on the basis of the Periodic Table in terms of their structures and key properties. This is followed by a general discussion on the electrochemistry of chalcogen species, and the principles underlying the electrochemical formation of inorganic compounds/alloys. The core of the book offers an insight into available experimental results and inferences regarding the electrochemical preparation and microstructural control of conventional and novel MCh structures. It also aims to survey their photoelectrochemistry, both from a material-oriented point of view and as connected to specific processes such as photocatalysis and solar energy conversion. Finally, the book illustrates the relevance of MCh materials to various applications of electrochemical interest such as (electro)catalysis in fuel cells, energy storage with intercalation electrodes, and ion sensing.
Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.
Download or read book Chemically Deposited Nanocrystalline Metal Oxide Thin Films written by Fabian I. Ezema and published by Springer Nature. This book was released on 2021-06-26 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book guides beginners in the areas of thin film preparation, characterization, and device making, while providing insight into these areas for experts. As chemically deposited metal oxides are currently gaining attention in development of devices such as solar cells, supercapacitors, batteries, sensors, etc., the book illustrates how the chemical deposition route is emerging as a relatively inexpensive, simple, and convenient solution for large area deposition. The advancement in the nanostructured materials for the development of devices is fully discussed.
Download or read book The Superalloys written by Roger C. Reed and published by Cambridge University Press. This book was released on 2008-07-31 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superalloys are unique high-temperature materials used in gas turbine engines, which display excellent resistance to mechanical and chemical degradation. This book introduces the metallurgical principles which have guided their development. Suitable for graduate students and researchers, it includes exercises and additional resources at www.cambridge.org/9780521859042.
