Download or read book Auger Electron Spectroscopy and Rutherford Backscattering Studies of Copper in 2024 T3 Aluminum Following Electrochemical Anodization in Phosphoric Acid written by J. S. Solomon and published by . This book was released on 1981 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effects of the electrochemical anodization of deoxidized 2024-T3 aluminum on copper were characterized by Auger electron spectroscopy and Rutherford backscattering. Anodization was performed in phosphoric acid at constant potential. Data is presented which shows that constant potential. Data is presented which shows that constant potential anodization of 2024-T3 is more efficient than aluminum in terms of oxide growth rates for short anodization times. However the maximum anodic oxide thickness achievable on the alloy is less than the pure metal. Copper is shown to be enriched at the oxide metal interface because of its diffusion from the bulk during anodization. The presence of copper at the oxide-metla interface is shown to affect oxide morphology. (Author).

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1981 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technical Abstract Bulletin written by and published by . This book was released on 1981 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metals Abstracts written by and published by . This book was released on 1982 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1981 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Finishing Abstracts written by and published by . This book was released on 1982 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Government Reports Annual Index written by and published by . This book was released on 1981 with total page 1194 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Auger Electron Spectroscopy Study of Surface Segregation in Copper aluminum Alloys written by John Ferrante and published by . This book was released on 1970 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface segregation of aluminum has been observed in copper-aluminum alloys by use of LEED and Auger electron spectroscopy studies. The alloys were solid solutions of aluminum in copper having compositions of 1, 5, and 10 atomic percent aluminum. All samples were single crystals oriented in the (111) direction. Surface concentrations five times that in the bulk were observed. LEED and characteristic loss data gave confirming evidence of surface composition changes. Surface concentration increased with temperature on heating to 700 [degree] C.

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1983 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Auger Electron Spectroscopy Study of Initial Stages of Oxidation in a Copper 19 6 atomic percent aluminum Alloy written by John Ferrante and published by . This book was released on 1973 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Corrosion Science written by E. McCafferty and published by Springer Science & Business Media. This book was released on 2010-01-04 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended for a one-semester course in corrosion science at the graduate or advanced undergraduate level. The approach is that of a physical chemist or materials scientist, and the text is geared toward students of chemistry, materials science, and engineering. This textbook should also be useful to practicing corrosion engineers or materials engineers who wish to enhance their understanding of the fundamental principles of corrosion science. It is assumed that the student or reader does not have a background in electrochemistry. However, the student or reader should have taken at least an undergraduate course in materials science or physical chemistry. More material is presented in the textbook than can be covered in a one-semester course, so the book is intended for both the classroom and as a source book for further use. This book grew out of classroom lectures which the author presented between 1982 and the present while a professorial lecturer at George Washington University, Washington, DC, where he organized and taught a graduate course on “Environmental Effects on Materials.” Additional material has been provided by over 30 years of experience in corrosion research, largely at the Naval Research Laboratory, Washington, DC and also at the Bethlehem Steel Company, Bethlehem, PA and as a Robert A. Welch Postdoctoral Fellow at the University of Texas. The text emphasizes basic principles of corrosion science which underpin extensions to practice.

Download or read book Active Protective Coatings written by Anthony E. Hughes and published by Springer. This book was released on 2016-03-01 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a broad range of materials science that has been brought to bear on providing solutions to the challenges of developing self-healing and protective coatings for a range of metals. The book has a strong emphasis on characterisation techniques, particularly new techniques that are beginning to be used in the coatings area. It features many contributions written by experts from various industrial sectors which examine the needs of the sectors and the state of the art. The development of self-healing and protective coatings has been an expanding field in recent years and applies a lot of new knowledge gained from other fields as well as other areas of materials science to the development of coatings. It has borrowed from fields such as the food and pharmaceutical industries who have used, polymer techniques, sol-gel science and colloidosome technology for a range encapsulation techniques. It has also borrowed from fields like hydrogen storage such as from the development of hierarchical and other materials based on organic templating as “nanocontainers” for the delivery of inhibitors. In materials science, recent developments in high throughput and other characterisation techniques, such as those available from synchrotrons, are being increasing used for novel characterisation – one only needs to look at the application of these techniques in self healing polymers to gauge wealth of new information that has been gained from these techniques. This work is largely driven by the need to replace environmental pollutants and hazardous chemicals that represent risk to humans such as chromate inhibitors which are still used in some applications.

Download or read book Semiconductor Material and Device Characterization written by Dieter K. Schroder and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Third Edition updates a landmark text with the latest findings The Third Edition of the internationally lauded Semiconductor Material and Device Characterization brings the text fully up-to-date with the latest developments in the field and includes new pedagogical tools to assist readers. Not only does the Third Edition set forth all the latest measurement techniques, but it also examines new interpretations and new applications of existing techniques. Semiconductor Material and Device Characterization remains the sole text dedicated to characterization techniques for measuring semiconductor materials and devices. Coverage includes the full range of electrical and optical characterization methods, including the more specialized chemical and physical techniques. Readers familiar with the previous two editions will discover a thoroughly revised and updated Third Edition, including: Updated and revised figures and examples reflecting the most current data and information 260 new references offering access to the latest research and discussions in specialized topics New problems and review questions at the end of each chapter to test readers' understanding of the material In addition, readers will find fully updated and revised sections in each chapter. Plus, two new chapters have been added: Charge-Based and Probe Characterization introduces charge-based measurement and Kelvin probes. This chapter also examines probe-based measurements, including scanning capacitance, scanning Kelvin force, scanning spreading resistance, and ballistic electron emission microscopy. Reliability and Failure Analysis examines failure times and distribution functions, and discusses electromigration, hot carriers, gate oxide integrity, negative bias temperature instability, stress-induced leakage current, and electrostatic discharge. Written by an internationally recognized authority in the field, Semiconductor Material and Device Characterization remains essential reading for graduate students as well as for professionals working in the field of semiconductor devices and materials. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.

Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.

Download or read book Corrosion of Magnesium Alloys written by G L Song and published by Woodhead Publishing. This book was released on 2011-03-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of magnesium alloys is increasing in a range of applications, and their popularity is growing wherever lightweight materials are needed. This book provides a comprehensive account of the corrosion of magnesium alloys. It covers not only the corrosion performances and mechanisms of Mg alloys in conventional environments, such as sodium chloride solutions, but also looks at their corrosion behaviours in special media, like engine coolants and simulated body fluids. Part one covers fundamentals such as the corrosion electrochemistry, activity and passivity of magnesium and its alloys. Part two then considers the metallurgical effect in relation to the corrosion of magnesium alloys, including the role of micro-structure and earth-rare elements, the corrosion behaviour of magnesium-based bulk metallic glasses, and the corrosion of innovative magnesium alloys. Part three goes on to describe environmental influences on the corrosion of magnesium alloys, such as atmospheric corrosion, stress corrosion cracking, creep and fatigue behaviour, and galvanic corrosion. Finally, part four is concerned with various means of protecting magnesium alloys against corrosion through the use of aluminium electrodeposition, conversion and electrophoretic coatings, and anodisation. With its distinguished editor and team of contributors, this book is an invaluable resource for metallurgists, engineers and designers working with magnesium and its alloys, as well as professionals in the aerospace and automotive industries.

Download or read book Nanostructures And Nanomaterials Synthesis Properties And Applications 2nd Edition written by Guozhong Cao and published by World Scientific Publishing Company. This book was released on 2011-01-03 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the 2nd edition of the original “Nanostructures and Nanomaterials” written by Guozhong Cao and published by Imperial College Press in 2004.This important book focuses not only on the synthesis and fabrication of nanostructures and nanomaterials, but also includes properties and applications of nanostructures and nanomaterials, particularly inorganic nanomaterials. It provides balanced and comprehensive coverage of the fundamentals and processing techniques with regard to synthesis, characterization, properties, and applications of nanostructures and nanomaterials. Both chemical processing and lithographic techniques are presented in a systematic and coherent manner for the synthesis and fabrication of 0-D, 1-D, and 2-D nanostructures, as well as special nanomaterials such as carbon nanotubes and ordered mesoporous oxides. The book will serve as a general introduction to nanomaterials and nanotechnology for teaching and self-study purposes.

Download or read book Corrosion and Surface Chemistry of Metals written by Dieter Landolt and published by EPFL Press. This book was released on 2007-05-02 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textbook; grad.