Download or read book Classical And Quantum Dynamics In Condensed Phase Simulations Proceedings Of The International School Of Physics written by Bruce J Berne and published by World Scientific. This book was released on 1998-06-17 with total page 881 pages. Available in PDF, EPUB and Kindle. Book excerpt: The school held at Villa Marigola, Lerici, Italy, in July 1997 was very much an educational experiment aimed not just at teaching a new generation of students the latest developments in computer simulation methods and theory, but also at bringing together researchers from the condensed matter computer simulation community, the biophysical chemistry community and the quantum dynamics community to confront the shared problem: the development of methods to treat the dynamics of quantum condensed phase systems.This volume collects the lectures delivered there. Due to the focus of the school, the contributions divide along natural lines into two broad groups: (1) the most sophisticated forms of the art of computer simulation, including biased phase space sampling schemes, methods which address the multiplicity of time scales in condensed phase problems, and static equilibrium methods for treating quantum systems; (2) the contributions on quantum dynamics, including methods for mixing quantum and classical dynamics in condensed phase simulations and methods capable of treating all degrees of freedom quantum-mechanically.

Download or read book Computational Catalysis written by Aravind Asthagiri and published by Royal Society of Chemistry. This book was released on 2014 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive review of the methods and approaches being adopted to push forward the boundaries of computational catalysis.

Download or read book Surface Organometallic Chemistry Molecular Approaches to Surface Catalysis written by Jean-Marie Basset and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface organometallic chemistry is a new field bringing together researchers from organometallic, inorganic, and surface chemistry and catalysis. Topics ranging from reaction mechanisms to catalyst preparation are considered from a molecular basis, according to which the "active site" on a catalyst surface has a supra-molecular character. This. the first book on the subject, is the outcome of a NATO Workshop held in Le Rouret. France, in May. 1986. It is our hope that the following chapters and the concluding summary of recommendations for research may help to provide a definition of surface organometallic chemistry. Besides catalysis. the central theme of the Workshop, four main topics are considered: 1) Reactions of organometallics with surfaces of metal oxides, metals. and zeolites; 2) Molecular models of surfaces, metal oxides, and metals; 3) Molecular approaches to the mechanisms of surface reactions; 4) Synthesis and modification of zeolites and related microporous solids. Most surface organometallic chemistry has been carried out on amorphous high-surf ace-area metal oxides such as silica. alumina. magnesia, and titania. The first chapter. contributed by KNOZINGER. gives a short summary of the structure and reactivity of metal oxide surfaces. Most of our understanding of these surfaces is based on acid base and redox chemistry; this chemistry has developed from X-ray and spectroscopic data, and much has been inferred from the structures and reactivities of adsorbed organic probe molecules. There are major opportunities for extending this understanding by use of well-defined (single crystal) oxide surfaces and organometallic probe molecules.

Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.

Download or read book Catalytic Ammonia Synthesis written by J.R. Jennings and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: The phenomenon of catalysis is found in many homogeneous and heterogeneous systems undergoing chemical change, where it effects the rates of approach to the equilibrium state in processes as diverse as those found in the stars, the earth's mantle, living organisms, and the various chemistries utilized by industry. The economies and the living standards of both developed and developing countries depend to varying degrees upon the efficacy of their chemical industries. Con sequently, this century has seen a wide exploration and expansion of catalytic chemistry together with an intensive investigation of specific, essential processes like those contributing to life-supporting agricultures. Prime among the latter must surely be the "fixation" of atmospheric nitrogen by catalytic hydrogenation to anhydrous ammonia, still the preferred synthetic precursor of the nitrogenous components of fertilizers. In each decade contemporary concepts and techniques have been used to further the understanding, as yet incomplete, of the catalyst, the adsorbates, the surface reactions, and the technology of large-scale operation. The contributors to the present volume review the state of the art, the science, and the technology; they reveal existing lacunae, and suggest ways forward. Around the turn of the century, Sabatier's school was extending the descriptive catalytic chemistry of hydrogenation by metals to include almost all types of multiple bond. The triple bond of dinitrogen, which continued to be more resistant than the somewhat similar bonds in carbon monoxide and ethyne, defied their efforts.

Download or read book Design of Heterogeneous Catalysts written by Umit S. Ozkan and published by John Wiley & Sons. This book was released on 2009-02-11 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This long-awaited reference source is the first book to focus on this important and hot topic. As such, it provides examples from a wide array of fields where catalyst design has been based on new insights and understanding, presenting such modern and important topics as self-assembly, nature-inspired catalysis, nano-scale architecture of surfaces and theoretical methods. With its inclusion of all the useful and powerful tools for the rational design of catalysts, this is a true "must have" book for every researcher in the field.

Download or read book Ammonia Synthesis Catalysts Innovation And Practice written by Huazhang Liu and published by World Scientific. This book was released on 2013-03-21 with total page 895 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a review of worldwide developments in ammonia synthesis catalysts over the last 30 years. It focuses on the new generation of Fe1-xO based catalysts and ruthenium catalysts — both are major breakthroughs for fused iron catalysts. The basic theory for ammonia synthesis is systematically explained, covering topics such as the chemical components, crystal structure, preparation, reduction, performance evaluation, characterization of the catalysts, the mechanism and kinetics of ammonia synthesis reaction. Both theory and practice are combined in this presentation, with emphasis on the research methods, application and exploitation of catalysts.The comprehensive volume includes an assessment of the economic and engineering aspects of ammonia plants based on the performance of catalysts. Recent developments in photo-catalysis, electro-catalysis, biocatalysis and new uses of ammonia are also introduced in this book.The author, Professor Huazhang Liu, has been engaged in research and practice for more than 50 years in this field and was the inventor of the first Fe1-xO based catalysts in the world. He has done a lot of research on Fe3O4 based- and ruthenium based-catalysts, and has published more than 300 papers and obtained 21 patents during his career.

Download or read book Fischer Tropsch Technology written by André Steynberg and published by Elsevier. This book was released on 2004-10-30 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fischer-Tropsch Technology is a unique book for its state-of-the-art approach to Fischer Tropsch (FT) technology. This book provides an explanation of the basic principles and terminology that are required to understand the application of FT technology. It also contains comprehensive references to patents and previous publications. As the first publication to focus on theory and application, it is a contemporary reference source for students studying chemistry and chemical engineering. Researchers and engineers active in the development of FT technology will also find this book an invaluable source of information. * Is the first publication to cover the theory and application for modern Fischer Tropsch technology * Contains comprehensive knowledge on all aspects relevant to the application of Fischer Tropsch technology* No other publication looks at past, present and future applications

Download or read book Iron and Cobalt Catalysts written by Wilson D. Shafer and published by MDPI. This book was released on 2020-06-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the turn of the last century when the field of catalysis was born, iron and cobalt have been key players in numerous catalysis processes. These metals, due to their ability to activate CO and CH, haev a major economic impact worldwide. Several industrial processes and synthetic routes use these metals: biomass-to-liquids (BTL), coal-to-liquids (CTL), natural gas-to-liquids (GTL), water-gas-shift, alcohol synthesis, alcohol steam reforming, polymerization processes, cross-coupling reactions, and photocatalyst activated reactions. A vast number of materials are produced from these processes, including oil, lubricants, waxes, diesel and jet fuels, hydrogen (e.g., fuel cell applications), gasoline, rubbers, plastics, alcohols, pharmaceuticals, agrochemicals, feed-stock chemicals, and other alternative materials. However, given the true complexities of the variables involved in these processes, many key mechanistic issues are still not fully defined or understood. This Special Issue of Catalysis will be a collaborative effort to combine current catalysis research on these metals from experimental and theoretical perspectives on both heterogeneous and homogeneous catalysts. We welcome contributions from the catalysis community on catalyst characterization, kinetics, reaction mechanism, reactor development, theoretical modeling, and surface science.

Download or read book Fischer Tropsch Synthesis Catalysts and Catalysis written by Burtron H. Davis and published by CRC Press. This book was released on 2016-04-06 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on a symposium held during the 248th American Chemical Society meeting that focused on use of the Fischer-Tropsch process in producing synthetic fuels. Its contents reflect the four dominant subjects of the meeting: catalyst preparation and activation, catalyst activity and reaction mechanisms, catalyst characterization and related reactions, and topics concerning commercializing the Fischer-Tropsch process. It covers recent developments related to renewable resources and green energy and provides a glimpse of the commercial potential of the Fischer-Tropsch process in synthetic fuel production.

Download or read book Kinetics of Heterogeneous Catalytic Reactions written by Michel Boudart and published by Princeton University Press. This book was released on 2014-07-14 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a critical account of the principles of the kinetics of heterogeneous catalytic reactions in the light of recent developments in surface science and catalysis science. Originally published in 1984. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These editions preserve the original texts of these important books while presenting them in durable paperback and hardcover editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.

Download or read book Catalytic Reactors written by Basudeb Saha and published by Walter de Gruyter GmbH & Co KG. This book was released on 2015-12-18 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalytic Reactors presents several key aspects of reactor design in Chemical and Process Engineering. Starting with the fundamental science across a broad interdisciplinary field, this graduate level textbook offers a concise overview on reactor and process design for students, scientists and practitioners new to the field. This book aims to collate into a comprehensive and well-informed work of leading researchers from north America, western Europe and south-east Asia. The editor and international experts discuss state-of-the-art applications of multifunctional reactors, biocatalytic membrane reactors, micro-flow reactors, industrial catalytic reactors, micro trickle bed reactors and multiphase catalytic reactors. The use of catalytic reactor technology is essential for the economic viability of the chemical manufacturing industry. The importance of Chemical and Process Engineering and efficient design of reactors are another focus of the book. Especially the combination of advantages from both catalysis and chemical reaction technology for optimization and intensification as essential factors in the future development of reactors and processes are discussed. Furthermore, options that can drastically influence reaction processes, e.g. choice of catalysts, alternative reaction pathways, mass and heat transfer effects, flow regimes and inherent design of catalytic reactors are reviewed in detail. Focuses on the state-of-the-art applications of catalytic reactors and optimization in the design and operation of industrial catalytic reactors Insights into transfer of knowledge from laboratory science to industry For students and researchers in Chemical and Mechanical Engineering, Chemistry, Industrial Catalysis and practising Engineers

Download or read book Carbon Dioxide Utilization to Sustainable Energy and Fuels written by Inamuddin and published by Springer Nature. This book was released on 2021-11-30 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book provides an in-depth overview of carbon dioxide (CO2) transformations to sustainable power technologies. It also discusses the wide scope of issues in engineering avenues, key designs, device fabrication, characterizations, various types of conversions and related topics. It includes studies focusing on the applications in catalysis, energy conversion and conversion technologies, etc. This is a unique reference guide, and one of the detailed works is on this technology. The book is the result of commitments by leading researchers from various backgrounds and expertise. The book is well structured and is an essential resource for scientists, undergraduate, postgraduate students, faculty, R&D professionals, energy chemists and industrial experts.

Download or read book Kinetics of Catalytic Reactions written by M. Albert Vannice and published by Springer Science & Business Media. This book was released on 2006-04-09 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes how to conduct kinetic experiments with heterogeneous catalysts, analyze and model the results, and characterize the catalysts Detailed analysis of mass transfer in liquid phase reactions involving porous catalysts. Important to the fine chemicals and pharmaceutical industries so it has appeal to many researchers in both industry and academia (chemical engineering and chemistry departments

Download or read book Catalytic Processes for The Valorisation of Biomass Derived Molecules written by Francesco Mauriello and published by MDPI. This book was released on 2019-11-22 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decades, inedible lignocellulosic biomasses have attracted significant attention for being abundant resources that are not in competition with agricultural land or food production and, therefore, can be used as starting renewable material for the production of a wide variety of platform chemicals. The three main components of lignocellulosic biomasses are cellulose, hemicellulose and lignin, complex biopolymers that can be converted into a pool of platform molecules including sugars, polyols, alchols, ketons, ethers, acids and aromatics. Various technologies have been explored for their one-pot conversion into chemicals, fuels and materials. However, in order to develop new catalytic processes for the selective production of desired products, a complete understanding of the molecular aspects of the basic chemistry and reactivity of biomass derived molecules is still crucial. This Special Issue reports on recent progress and advances in the catalytic valorization of cellulose, hemicellulose and lignin model molecules promoted by novel heterogeneous systems for the production of energy, fuels and chemicals.

Download or read book Horizons in Bioprocess Engineering written by Ravindra Pogaku and published by Springer Nature. This book was released on 2019-10-12 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is divided into four parts that outline the use of science and technology for applications pertaining to chemical and bioprocess engineering. The book endeavors to help academia, researchers, and practitioners to use the principles and tools of Chemical and Bioprocess Engineering in a pertinent way, while attempting to point out the novel thoughts associated with the brain storming concepts encountered. As an example, the ability to use case studies appropriately is more important, to most practitioners.

Download or read book Concepts of Modern Catalysis and Kinetics written by I. Chorkendorff and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until now, the literature has offered a rather limited approach to the use of fundamental kinetics and their application to catalytic reactions. Subsequently, this book spans the full range from fundamentals of kinetics and heterogeneous catalysis via modern experimental and theoretical results of model studies to their equivalent large-scale industrial production processes. The result is key knowledge for students at technical universities and professionals already working in industry. '... such an enterprise will be of great value to the community, to professionals as well as graduate and undergraduate students attempting to move into the field of modern catalysis and kinetics. I strongly recommend you publish this book based on the proposal.' - Prof. Dr. G. A. Samorjai, University of California 'Both authors are well respected specialists, with a very long record of original top-quality work and an international reputation. A book from these authors will be considered an authoritative piece of work, I definitely support this project and I am looking forward to use the book when published.' - Prof. Dr. D. E. Resasco, University of Oklahoma 'I wholly support the proposed project. The authors are very competent young colleagues and there is a real need for such a textbook' - Prof. Dr. G. Ertl, Fritz-Haber-Institut, Max-Planck-Gesellschaft, Berlin