Download or read book Atomic Oxygen Protection of Materials in Low Earth Orbit written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-10-03 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spacecraft polymeric materials as well as polymer-matrix carbon-fiber composites can be significantly eroded as a result of exposure to atomic oxygen in low Earth orbit (LEO). Several new materials now exist, as well as modifications to conventionally used materials, that provide much more resistance to atomic oxygen attack than conventional hydrocarbon polymers. Protective coatings have also been developed which are resistant to atomic oxygen attack and provide protection of underlying materials. However, in actual spacecraft applications, the configuration, choice of materials, surface characteristics and functional requirements of quasi-durable materials or protective coatings can have great impact on the resulting performance and durability. Atomic oxygen degradation phenomena occurring on past and existing spacecraft will be presented. Issues and considerations involved in providing atomic oxygen protection for materials used on spacecraft in low Earth orbit will be addressed. Analysis of in-space results to determine the causes of successes and failures of atomic oxygen protective coatings is presented. Banks, Bruce A. and Demko, Rikako Glenn Research Center NASA/TM-2002-211360, E-13180, NAS 1.15:211360
Download or read book Protection of Materials and Structures From the Space Environment written by Jacob Kleiman and published by Springer Science & Business Media. This book was released on 2012-09-22 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goals of the 10th International Space Conference on “Protection of Materials and Structures from Space Environment” ICPMSE-10J, since its inception in 1992, have been to facilitate exchanges between members of the various engineering and science disciplines involved in the development of space materials, including aspects of LEO, GEO and Deep Space environments, ground-based qualification, and in-flight experiments and lessons learned from operational vehicles that are closely interrelated to disciplines of the atmospheric sciences, solar-terrestrial interactions and space life sciences. The knowledge of environmental conditions on and around the Moon, Mars, Venus and the low Earth orbit as well as other possible candidates for landing such as asteroids have become an important issue, and protecting both hardware and human life from the effects of space environments has taken on a new meaning in light of the increased interest in space travel and colonization of other planets. And while many material experiments have been carried out on the ground and in open space in the last 50 years (LDEF, MEEP, SARE, MISSE, AOP, DSPSE, ESEM, EURECA, HST, MDIM, MIS, MPID, MPAC and SEED), many questions regarding the environmental impact of space on materials remain either poorly understood or unanswered. The coming generations of scientists will have to continue this work and tackle new challenges, continuing to build the level of confidence humans will need to continue the colonization of space. It is hoped that the proceedings of the ICPMSE-10J presented in this book will constitute a small contribution to doing so.
Download or read book Protection of Materials and Structures from the Low Earth Orbit Space Environment written by J. Kleiman and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents the proceedings of ICPMSE-3, the third international conference on Protection of Materials and Structures from the Low Earth Orbit Space Environment, held in Toronto April 25-26, 1996. The conference was hosted and organized by Integrity Testing Laboratory Inc, (ITL), and held at the University of Toronto's Institute for Aerospace Studies (UTIAS), where ITL is located. Twenty industrial companies, seven wliversities and eight government agencies from Canada, USA, United Kingdom, France, Israel, Russia, Ukraine and the Netherlands were represented by over 55 participants indicating increasing international co-operation in this critical arena of protection of materials in space. Twenty-five speakers, world experts in their fields, delivered talks on a wide variety of topics on various aspects of material protection in space, Representatives from the Canadian, American, European and Israeli space agencies as well as from leading space research laboratories of major aerospace industries gathered at UTIAS to discuss the latest developments in the field of material and structure protection from the harsh space environment, These proceedings are organized into four sections: a) AONOV and Radiation Effects on Materials and Structures in the Leo Space Environment; b) Interaction of Matter with the LEO Environment; c) Large Scale Coating Process Developments for Protection in LEO; d) Synthesis and Modification of Materials and Surfaces for Protection in LEO, This is the third in our on-going series of bi-annual international space materials conferences wllich began in 1992 in Toronto. Jacob Kleiman, Integrity Testing Laboratory Inc.
Download or read book Low Earth Orbital Atomic Oxygen Interactions with Spacecraft Materials written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-21 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atomic oxygen, formed in Earth s thermosphere, interacts readily with many materials on spacecraft flying in low Earth orbit (LEO). All hydrocarbon based polymers and graphite are easily oxidized upon the impact of approx.4.5 eV atomic oxygen as the spacecraft ram into the residual atmosphere. The resulting interactions can change the morphology and reduce the thickness of these materials. Directed atomic oxygen erosion will result in the development of textured surfaces on all materials with volatile oxidation products. Examples from space flight samples are provided. As a result of the erosive properties of atomic oxygen on polymers and composites, protective coatings have been developed and are used to increase the functional life of polymer films and composites that are exposed to the LEO environment. The atomic oxygen erosion yields for actual and predicted LEO exposure of numerous materials are presented. Results of in-space exposure of vacuum deposited aluminum protective coatings on polyimide Kapton indicate high rates of degradation are associated with aluminum coatings on both surfaces of the Kapton. Computational modeling predictions indicate that less trapping of the atomic oxygen occurs, with less resulting damage, if only the space-exposed surface is coated with vapor deposited aluminum rather than having both surfaces coated. Banks, Bruce A. and deGroh, Kim K. and Miller, Sharon K. Glenn Research Center NASA/TM-2004-213400, E-14905
Download or read book Material Selection Guidelines to Limit Atomic Oxygen Effects on Spacecraft Surfaces written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-03 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report provides guidelines in selecting materials for satellites and space platforms, designed to operate within the Low-Earth orbit environment, which limit the effects of atomic oxygen interactions with spacecraft surfaces. This document should be treated as an introduction rather than a comprehensive guide since analytical and flight technologies continue to evolve, flight experiments are conducted as primary or piggyback opportunities arise, and our understanding of materials interactions and protection methods grows. The reader is urged to consult recent literature and current web sites containing information about research and flight results.Dooling, D. and Finckenor, M. M.Marshall Space Flight CenterSPACE PLATFORMS; MATERIALS; LOW EARTH ORBITS; OXYGEN; OXYGEN ATOMS; READERS; PROTECTION
Download or read book In space Technology Development Atomic Oxygen and Orbital Debris Effects written by James T. Visentine and published by . This book was released on 1989 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Protection of Materials and Structures from Space Environment written by J. Kleiman and published by Springer Science & Business Media. This book was released on 2006-03-09 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents the proceedings of ICPMSE-6, the sixth international conference on Protection of Materials and Structures from Space Environment, held in Toronto May 1-3, 2002. The ICPMSE series of meetings became an important part of the LEO space community since it was started in 1991. Since then, the meeting has grown steadily, attracting a large number of engineers, researchers, managers, and scientists from industrial companies, scientific institutions and government agencies in Canada, U. S. A. , Asia, and Europe, thus becoming a true international event. This year’s meeting is gaining even stronger importance with the resumption of the ISS and other space projects in LEO, GEO and Deep Space. To reflect on these activities, the topics in the program have been extended to include protection of materials in GEO and Deep Space. The combination of a broad selection of technical and scientific topics addressed by internationally known speakers with the charm of Toronto and the hospitality of the organizers brings participants back year after year. The conference was hosted and organized by Integrity Testing Laboratory Inc. (ITL), and held at the University of Toronto’s Institute for Aerospace Studies (UTIAS). The meeting was sponsored by the Materials and Manufacturing Ontario (MMO) and the CRESTech, two Ontario Centres of Excellence; Air Force Office of Scientific Research (AFOSR/NL); MD Robotics; EMS Technologies; The Integrity Testing Laboratory (ITL); and the UTIAS.
Download or read book Advances in Small Satellite Technologies written by PSR Srinivasa Sastry and published by Springer Nature. This book was released on 2020-05-04 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains select papers presented during the 1st International Conference on Small Satellites, discussing the latest research and developments relating to small satellite technology. The papers cover various issues relating to design and engineering, ranging from the control, mechanical and thermal systems to the sensors, antennas and RF systems used. The volume will be of interest to scientists and engineers working on or utilizing satellite and space technologies.
Download or read book Atomic Oxygen Effects on Spacecraft Materials written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-20 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low Earth orbital (LEO) atomic oxygen cannot only erode the external surfaces of polymers on spacecraft, but can cause degradation of surfaces internal to components on the spacecraft where openings to the space environment exist. Although atomic oxygen attack on internal or interior surfaces may not have direct exposure to the LEO atomic oxygen flux, scattered impingement can have can have serious degradation effects where sensitive interior surfaces are present. The effects of atomic oxygen erosion of polymers interior to an aperture on a spacecraft is simulated using Monte Carlo computational techniques. A 2-dimensional model is used to provide quantitative indications of the attenuation of atomic oxygen flux as a function of distance into a parallel walled cavity. The degree of erosion relative is compared between the various interior locations and the external surface of an LEO spacecraft. Banks, Bruce A. and Miller, Sharon K. R. and deGroh, Kim K. and Demko, Rikako Glenn Research Center NASA/TM-2003-212484, NAS 1.15:212484, E-14026
Download or read book Protection of Materials and Structures from the Space Environment written by Jacob I. Kleiman and published by Springer Science & Business Media. This book was released on 2006-07-13 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effects of various space environment factors like atomic oxygen, vacuum ultraviolet radiation, charging, micrometeoroids, meteoroid showers, etc. on materials and structures in various orbits are discussed. In addition the ways to prevent these effects or reduce them through protection by coatings or modification of affected surfaces are considered in the book. The discussions on development of predictive models of material erosion that will allow the materials engineers and designers of future spacecraft to evaluate materials' behaviour is continued from the past meetings.
Download or read book Orbital Debris written by National Research Council and published by National Academies Press. This book was released on 1995-07-07 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the beginning of space flight, the collision hazard in Earth orbit has increased as the number of artificial objects orbiting the Earth has grown. Spacecraft performing communications, navigation, scientific, and other missions now share Earth orbit with spent rocket bodies, nonfunctional spacecraft, fragments from spacecraft breakups, and other debris created as a byproduct of space operations. Orbital Debris examines the methods we can use to characterize orbital debris, estimates the magnitude of the debris population, and assesses the hazard that this population poses to spacecraft. Potential methods to protect spacecraft are explored. The report also takes a close look at the projected future growth in the debris population and evaluates approaches to reducing that growth. Orbital Debris offers clear recommendations for targeted research on the debris population, for methods to improve the protection of spacecraft, on methods to reduce the creation of debris in the future, and much more.
Download or read book Zr Containing 4 4 ODA PMDA Polyimide Composites written by and published by . This book was released on 2001 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book In Space Technology Development written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-05 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earlier Shuttle flight experiments have shown atomic oxygen within the orbital environment can interact with many materials to produce surface recession and mass loss and combine catalytically with other constituents to generate visible and infrared glows. In addition to these effects, examinations of returned satellite hardware have shown many spacecraft materials are also susceptible to damage from high velocity impacts with orbital space debris. These effects are of particular concern for large, multi-mission spacecraft, such as Space Station and SDI operational satellites, that will operate in low-Earth orbit (LEO) during the late 1990's. Not only must these spacecraft include materials and exterior coatings that are resistant to atomic oxygen surface interactions, but these materials must also provide adequate protection against erosion and pitting that could result from numerous impacts with small particles (less than 100 microns) of orbital space debris. An overview of these concerns is presented, and activities now underway to develop materials and coatings are outlined that will provide adequate atomic protection for future spacecraft. The report also discusses atomic oxygen and orbital debris flight experiments now under development to expand our limited data base, correlate ground-based measurments with flight results, and develop an orbital debris collision warning system for use by future spacecraft. Visentine, James T. and Potter, Andrew E., Jr. Johnson Space Center ...
Download or read book Low Earth Orbital Atomic Oxygen Interactions with Materials written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-21 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atomic oxygen is formed in the low Earth orbital environment (LEO) by photo dissociation of diatomic oxygen by short wavelength (
Download or read book Protection of Materials and Structures from Space Environment written by Jacob I. Kleiman and published by AIP Conference Proceedings / M. This book was released on 2009-01-15 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conference proceedings are discussing the latest developments in the area of the effects of the space environment on materials and structures and the ways to prevent and/or reduce them. The effects of various space environment factors like atomic oxygen, vacuum ultraviolet radiation, charging, micrometeoroids, meteoroid showers, etc. on materials and structures in various space conditions are discussed. In addition the ways to prevent these effects or reduce them through protection by coatings or modification of affected surfaces are considered in the book. The discussions on development of predictive models of material erosion that will allow the materials engineers and designers of future spacecraft to evaluate materials' behavior is continued from the past meetings.
Download or read book Material Selection Guidelines to Limit Atomic Oxygen Effects on Spacecraft Surfaces written by D. Dooling and published by . This book was released on 1999 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.
