Download or read book Atmospheric Pressure Plasma Treatment of Polymers written by Michael Thomas and published by John Wiley & Sons. This book was released on 2013-06-19 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: An indispensable volume detailing the current and potential applications of atmospheric pressure plasma treatment by experts practicing in fields around the world Polymers are used in a wide variety of industries to fabricate legions of products because of their many desirable traits. However, polymers in general (and polyolefins, in particular) are innately not very adhesionable because of the absence of polar or reactive groups on their surfaces and concomitant low surface energy. Surface treatment of polymers, however, is essential to impart reactive chemical groups on their surfaces to enhance their adhesion characteristic. Proper surface treatment can endow polymers with improved adhesion without affecting the bulk properties. A plethora of techniques (ranging from wet to dry, simple to sophisticated, vacuum to non-vacuum) for polymer surface modification have been documented in the literature but the Atmospheric Pressure Plasma (APP) treatment has attracted much attention because it offers many advantages vis-a-vis other techniques, namely uniform treatment, continuous operation, no need for vacuum, simplicity, low cost, no environmental or disposal concern, and applicability to large area samples. Although the emphasis in this book is on the utility of APP treatment for enhancement of polymer adhesion, APP is also applicable and effective to modulate many other surface properties of polymers: superhydrophilicity, superhydrophobicity, anti-fouling, anti-fogging, anti-icing, cell adhesion, biocompatibility, tribological behavior, etc. The key features of Atmospheric Pressure Plasma Treatment of Polymers: Address design and functions of various types of reactors Bring out current and potential applications of APP treatment Represent the cumulative wisdom of many key academic and industry researchers actively engaged in this key and enabling technology

Download or read book Atmospheric Pressure Plasma Treatment of Polymers written by Michael Thomas and published by John Wiley & Sons. This book was released on 2013-05-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: An indispensable volume detailing the current and potential applications of atmospheric pressure plasma treatment by experts practicing in fields around the world Polymers are used in a wide variety of industries to fabricate legions of products because of their many desirable traits. However, polymers in general (and polyolefins, in particular) are innately not very adhesionable because of the absence of polar or reactive groups on their surfaces and concomitant low surface energy. Surface treatment of polymers, however, is essential to impart reactive chemical groups on their surfaces to enhance their adhesion characteristic. Proper surface treatment can endow polymers with improved adhesion without affecting the bulk properties. A plethora of techniques (ranging from wet to dry, simple to sophisticated, vacuum to non-vacuum) for polymer surface modification have been documented in the literature but the Atmospheric Pressure Plasma (APP) treatment has attracted much attention because it offers many advantages vis-a-vis other techniques, namely uniform treatment, continuous operation, no need for vacuum, simplicity, low cost, no environmental or disposal concern, and applicability to large area samples. Although the emphasis in this book is on the utility of APP treatment for enhancement of polymer adhesion, APP is also applicable and effective to modulate many other surface properties of polymers: superhydrophilicity, superhydrophobicity, anti-fouling, anti-fogging, anti-icing, cell adhesion, biocompatibility, tribological behavior, etc. The key features of Atmospheric Pressure Plasma Treatment of Polymers: Address design and functions of various types of reactors Bring out current and potential applications of APP treatment Represent the cumulative wisdom of many key academic and industry researchers actively engaged in this key and enabling technology

Download or read book Plasma Modification of Polyolefins written by N. S. Baneesh and published by Springer Nature. This book was released on 2021-11-22 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses plasma modification of polyolefin surfaces. It comprises 21 chapters divided into three major sections. The first section covers the different techniques used for plasma modification of polyolefin surfaces and the effects of various gases as a surrounding medium, while the second provides a detailed analysis of the physics and chemistry of plasma modification and discusses various innovative characterization techniques, as well as ageing of the modified surface. It focuses on the analysis of changes in polymers’ surface chemistry using various spectroscopic techniques, and of changes in their surface morphology after plasma treatment using optical microscopy, electron microscopy and atomic force microscopy. In addition, it provides detailed information on the characterization of modified polymer surfaces. The book’s third and last section covers a range of applications of plasma-modified polyolefin surfaces varying from the packaging industry to the biomedical field, and shares valuable insights on the lifecycle analysis of plasma modification and modified surfaces.

Download or read book Atmospheric Pressure Plasma for Surface Modification written by Rory A. Wolf and published by John Wiley & Sons. This book was released on 2012-11-08 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book's focus and intent is to impart an understanding of the practical application of atmospheric plasma for the advancement of a wide range of current and emerging technologies. The primary key feature of this book is the introduction of over thirteen years of practical experimental evidence of successful surface modifications by atmospheric plasma methods. It offers a handbook-based approach for leveraging and optimizing atmospheric plasma technologies which are currently in commercial use. It also offers a complete treatment of both basic plasma physics and industrial plasma processing with the intention of becoming a primary reference for students and professionals. The reader will learn the mechanisms which control and operate atmospheric plasma technologies and how these technologies can be leveraged to develop in-line continuous processing of a wide variety of substrates. Readers will gain an understanding of specific surface modification effects by atmospheric plasmas, and how to best characterize those modifications to optimize surface cleaning and functionalization for adhesion promotion. The book also features a series of chapters written to address practical surface modification effects of atmospheric plasmas within specific application markets, and a commercially-focused assessment of those effects.

Download or read book Plasma Technologies for Textiles written by Roshan Shishoo and published by Elsevier. This book was released on 2007-02-21 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma technologies present an environmentally-friendly and versatile way of treating textile materials in order to enhance a variety of properties such as wettability, liquid repellency, dyeability and coating adhesion. Recent advances made in commercially viable plasma systems have greatly increased the potential of using plasma technology in industrial textile finishing. This pioneering book provides an essential guide to both the technology and science related to plasmas and its practical applications in the textile industry. The first part of the book discusses the science and technology behind plasmas. Chapters give detailed and comprehensive descriptions on the characteristics of plasmas and methods of control and treatment in the processing of textiles. Both low pressure cold plasma and atmospheric pressure cold plasma processes are described as well as the diagnosis and control of plasma parameters in plasma generating reactors. A chapter is devoted to the use of plasma technology to achieve nanoscale treatment of textile surfaces. The second part of the book concentrates on specific applications of plasma technologies. Chapters cover treatments for water and oil repellency of textiles, engineering of biomedical textiles and woollen finishing techniques through the use of plasma technologies. Further chapters cover the modification of fibres for use in composites and the potential use of plasma technologies for the finishing of fabrics made of man made fibres. The final chapter in the book gives a comprehensive analysis of the surface chemical and physical characterisation of plasma treated fabrics. Written by a distinguished international team of experts, Plasma technologies for textiles is an invaluable reference for researchers, scientists and technologists alike. Summarises both the science and technology of plasma processing, and its practical applications Discusses how plasma technology improves textile properties such as wettability and liquid repelling An invaluable reference for researchers, scientists and technologists

Download or read book Advanced Composites for Aerospace Marine and Land Applications written by Tomoko Sano and published by John Wiley & Sons. This book was released on 2013-12-30 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume cover a broad spectrum of topics that represent the truly diverse nature of the field of composite materials. This collection presents research and findings relevant to the latest advances in composites materials, specifically their use in aerospace, maritime, and even land applications. The editors have made every effort to bring together authors who put forth recent advances in their research while concurrently both elaborating on and thereby enhancing our prevailing understanding of the salient aspects related to the science, engineering, and far-reaching technological applications of composite materials.

Download or read book Surface Modification of Polymers written by Jean Pinson and published by John Wiley & Sons. This book was released on 2020-02-18 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to modifying and functionalizing the surfaces of polymers Surface Modification of Polymers is an essential guide to the myriad methods that can be employed to modify and functionalize the surfaces of polymers. The functionalization of polymer surfaces is often required for applications in sensors, membranes, medicinal devices, and others. The contributors?noted experts on the topic?describe the polymer surface in detail and discuss the internal and external factors that influence surface properties. This comprehensive guide to the most important methods for the introduction of new functionalities is an authoritative resource for everyone working in the field. This book explores many applications, including the plasma polymerization technique, organic surface functionalization by initiated chemical vapor deposition, photoinduced functionalization on polymer surfaces, functionalization of polymers by hydrolysis, aminolysis, reduction, oxidation, surface modification of nanoparticles, and many more. Inside, readers will find information on various applications in the biomedical field, food science, and membrane science. This important book: -Offers a range of polymer functionalization methods for biomedical applications, water filtration membranes, and food science -Contains discussions of the key surface modification methods, including plasma and chemical techniques, as well as applications for nanotechnology, environmental filtration, food science, and biomedicine -Includes contributions from a team of international renowned experts Written for polymer chemists, materials scientists, plasma physicists, analytical chemists, surface physicists, and surface chemists, Surface Modification of Polymers offers a comprehensive and application-oriented review of the important functionalization methods with a special focus on biomedical applications, membrane science, and food science.

Download or read book Polymer Surface Modification Relevance to Adhesion written by Kash L. Mittal and published by CRC Press. This book was released on 2004-08-26 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents the proceedings of the Fourth International Symposium on Polymer Surface Modification: Relevance to Adhesion held under the auspices of MST Conferences, LLC in Orlando, FL, June 9-11, 2003. Polymers are used for a variety of purposes in a host of technological applications and even a cursory look at the literature will evince that currently there is tremendous interest and R&D activity in the area of polymer surface modification to attain their desired surface characteristics, particularly to enhance their adhesion. This volume contains a total of 25 papers which were properly peer reviewed, revised and edited. So this book is not merely a collection of papers, rather represents the highest standard of publication. The book is divided into three parts: 1. Plasma Surface Modification Techniques; 2. Other / Miscellaneous Surface Modification Techniques; and 3. General Papers. The topics covered include: low pressure plasma surface modification of a variety of polymers using various gases; atmospheric pressure plasma treatment; improvement of stain release properties of fabrics; modification of electrostatic properties of polymers; photon-based processes for surface modification of fibers; excimer UV light treatment; excimer laser surface treatment; low-energy ion treatment; photo-grafting and photo-curing; metallization of treated polymers; chemical (wet) functionalization of polymers; adhesion of paints to thermoplastic substrates; polymer release surfaces; nanolithography in polymer films; gas barrier properties of ceramic layers on polymers; and modification of interphase layer and relevance to adhesion. This volume and its predecessors containing plentiful information should serve as a comprehensive source of latest R&D activity in the highly technologically important arena of polymer surface modification. Anyone interested –centrally or peripherally– in knowing or learning about the various ways to modify polymer surfaces should find this book of immense value.

Download or read book Biodegradable Green Composites written by Susheel Kalia and published by John Wiley & Sons. This book was released on 2016-02-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively addresses surface modification of natural fibers to make them more effective, cost-efficient, and environmentally friendly. Topics include the elucidation of important aspects surrounding chemical and green approaches for the surface modification of natural fibers, the use of recycled waste, properties of biodegradable polyesters, methods such as electrospinning, and applications of hybrid composite materials.

Download or read book Plasma Polymer Films written by Hynek Biederman and published by World Scientific. This book was released on 2004 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Polymer Films examines the current status of the deposition and characterization of fluorocarbon-, hydrocarbon- and silicon-containing plasma polymer films and nanocomposites, with plasma polymer matrix. It introduces plasma polymerization process diagnostics such as optical emission spectroscopy (OES, AOES), and describes special deposition techniques such as atmospheric pressure glow discharge. Important issues for applications such as degradation and stability are treated in detail, and structural characterization, basic electrical and optical properties and biomedical applications are discussed.

Download or read book Polymer Biointerfaces written by Marián Lehocký and published by MDPI. This book was released on 2020-12-02 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dear Colleagues, Polymer biointerfaces are considered a suitable alternative to the improvement and development of numerous applications. The optimization of polymer surface properties can control several biological processes, such as cell adhesion, proliferation, viability, and enhanced extracellular matrix secretion functions at biointerfaces. This printed Special Issue on Polymer Biointerfaces is focused on fundamental and applied research on polymers and systems with biological origin. Submissions contain both polymer material background and descriptions of interacting biological phenomena or relevance to prospective applications in biomedical, biochemical, biophysical, biotechnological, food, pharmaceutical, or cosmetic fields. Special attention has been given to polymer bio-surface modification, bio-coatings, cell–polymer surface interactions, self-assembling monolayers on polymers, in-vivo and in-vitro systems, protein–polymer surface interaction, polysaccharide–polymer interactions, biotribology, bio chip, biosensors, nano-bio interfaces, coatings, biofilms, adhesion phenomena, and molecular recognition, among others. Assoc. Prof. Marián LehockýAssoc. Prof. Petr HumpolíčekGuest Editors

Download or read book Atmospheric Pressure Plasma written by Anton Nikiforov and published by BoD – Books on Demand. This book was released on 2019-04-24 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma as the fourth state of matter is an ionized gas consisting of both negative and positive ions, electrons, neutral atoms, radicals, and photons. In the last few decades, atmospheric-pressure plasmas have started to attract increasing attention from both scientists and industry due to a variety of potential applications. Because of increasing interest in the topic, the focus of this book is on providing engineers and scientists with a fundamental understanding of the physical and chemical properties of different atmospheric-pressure plasmas via plasma diagnostic techniques and their applications. The book has been organized into two parts. Part I focuses on the latest achievements in advanced diagnostics of different atmospheric-pressure plasmas. Part II deals with applications of different atmospheric-pressure plasmas.

Download or read book Plasma Medicine written by Yusuf Tutar and published by BoD – Books on Demand. This book was released on 2018-05-16 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma can be defined as the extracellular matrix of blood cells. Plasma components, their role in human health risk evaluation, and their functional and clinical analyses are covered in this book. Furthermore, physical plasma-ionized gas is one of the four fundamental states of matter. This homonym has begun to emerge because it can interact with living systems. The physical plasma biomedical applications are reviewed in drug delivery and wound healing medical applications. This approach revolutionizes the therapeutic approaches in medicine and may open up new concepts and clinical applications. The book is an essential source for researchers in the field and provides a platform for different professions.

Download or read book Atmospheric Pressure Plasmas written by Margaret Parker and published by Nova Science Publishers. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma is one of the most fundamental states of matter other than solid, liquid and gaseous. It consists of positive ions, neutral atoms, electrons, negative ions and neutral or charged molecules can be identified. Generally, plasma can be classified according to its gas temperature. Atmospheric-pressure plasma (APP), is actually a partly ionized gas. Non-equilibrium APP has an ability to produce a mixture of reactive species including, reactive oxygen species (ROS) and reactive nitrogen species (RNS), which can act as biologically active agents. This book discusses the processes, technology and applications of APPs. The first chapter examines the influence of APPs on biomolecules. Chapter Two focuses on the development and application of optical techniques for diagnosing gliding arc discharge at atmospheric pressure, emphasis being placed on gaining a better understanding of the spatial, temporal and spectral discharge characteristics. Chapter Three presents several approaches for such free-form plasma activation of different plastics and polymers based on direct and indirect dielectric barrier discharge (DBD) plasmas. Chapter Four reviews the combination of plasmachemical oxidation PCO and atmospheric pressure chemical vapour deposition APCVD for creating novel functional surfaces. Chapter Five reviews the impact of gas diffusion barrier film synthesis on polymers by atmospheric pressure plasma enhanced chemical vapour deposition. Chapter Six presents and discusses some of the most recent applications of microwave plasmas, with the view of understanding microwave plasma behaviour. Chapter Seven discusses selective synthesis of self-standing carbon nanostructures using microwave driven plasmas at atmospheric pressure conditions. Chapter Eight studies the application of non-thermal atmospheric pressure plasma in textiles. Chapter Nine reviews a current state of the art and opportunities for the use of plasma surface treatment in the coating and conversion of paper products.

Download or read book Plasma Surface Modification of Polymers Relevance to Adhesion written by Kash L. Mittal and published by CRC Press. This book was released on 2014-04-29 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of invited papers (previously published in special issues of the Journal of Adhesion Science and Technology) written by internationally recognized researchers actively working in the field of plasma surface modification. It provides a current, comprehensive overview of the plasma treatment of polymers. In contrast to plasm

Download or read book Frontiers of Textile Materials written by Mohd Shabbir and published by John Wiley & Sons. This book was released on 2020-03-17 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book “Frontiers and Textile Materials will deal with the important materials that can be utilized for value-addition and functionalization of textile materials. The topics covered in this book includes the materials like enzymes, polymers, etc. that are utilized for conventional textile processing and the advanced materials like nanoparticles which are expected to change the horizons of textiles. The futuristic techniques for textile processing like plasma are also discussed.

Download or read book Polymer Surface Modification to Enhance Adhesion written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2024-04-02 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: POLYMER SURFACE MODIFICATION TO ENHANCE ADHESION This unique, comprehensive and groundbreaking book is the first on this important subject. Polymer Surface Modification to Enhance Adhesion comprises 13 chapters and is divided into two parts: Part 1: Energetic Treatments; and Part 2: Chemical Treatments. Topics covered include atmospheric pressure plasma treatment of polymers to enhance adhesion; corona treatment of polymer surfaces to enhance adhesion; flame surface treatment of polymers to enhance adhesion; vacuum UV photo-oxidation of polymer surfaces to enhance adhesion; optimization of adhesion of polymers using photochemical surface modification UV/Ozone surface treatment of polymers to enhance adhesion; adhesion enhancement of polymer surfaces by ion beam treatment; polymer surface modification by charged particles; laser surface modification of polymeric materials; competition in adhesion between polysort and monosort functionalized polyolefinic surfaces; amine-terminated dendritic materials for polymer surface modification; arginine-glycine-aspartic acid (RGD) modification of polymer surfaces; and adhesion promoters for polymer surfaces. Audience The book will be of great interest to polymer scientists, surface scientists, adhesionists, materials scientists, plastics engineers, and to those involved in adhesive bonding, packaging, printing, painting, metallization, biological adhesion, biomedical devices, and polymer composites.