Download or read book Assessment of Safety and Risk with a Microscopic Model of Detonation written by C.-O. Leiber and published by Elsevier. This book was released on 2003-04-25 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book is a store of less well-known explosion anddetonation phenomena, including also data and experiences related tosafety risks. It highlights the shortcomings of the currentengineering codes based on a classical plane wave model of thephenomenon, and why these tools must fail. For the first time all the explosion phenomena are described in termsof proper assemblages of hot spots, which emit pressure waves andassociated near field terms in flow. Not all of the approaches arenew. Some even date back to the 19th century or earlier.. What is newis the application of these approaches to explosion phenomena. Inorder to make these tools easily available to the current detonationphysicist, basic acoustics is therefore also addressed. Whereas the current plane wave, homogeneous flow detonation physicsis an excellent engineering tool for numerical predictions undergiven conditions, the multi-hot-spot-model is an additional tool foranalyzing phenomena that cannot be explained by classicalcalculations. The real benefit comes from being able to understand,without any artificial assumptions, the whole phenomenology ofdetonations and explosions. By specifying pressure generatingmechanisms, one is able to see that the current treatment of thedetonics of energetic materials is only a very special - but powerful- case of explosion events and hazards. It becomes clear thatphysical explosions must be taken into account in any safetyconsiderations. In these terms it is easy to understand why evenliquid carbon dioxide and inert silo materials can explode. A unique collection of unexpected events, which might surprise evenspecialists, has resulted from the evaluation of the model. Thereforethis book is valuable for each explosion and safety scientist for theunderstanding and forecasting of unwanted events. The text mainlyaddresses the next generation of explosion and detonation scientists,with the goal of promoting the science of detonation on a newphysical basis. For this reason gaps in current knowledge are alsoaddressed. The science of explosions is not fully mature, but isstill in its beginning - and the tools necessary for furthering theunderstanding of these phenomena have been with us for centuries.
Download or read book Assessment of Safety and Risk with a Microscopic Model of Detonation written by C.-O. Leiber and published by Elsevier. This book was released on 2003-04-25 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whereas the current plane wave, homogeneous flow detonation physics is an excellent engineering tool for numerical predictions under given conditions, the multi-hot-spot-model is an additional tool for analyzing phenomena that cannot be explained by classical calculations. The real benefit comes from being able to understand, without any artificial assumptions, the whole phenomenology of detonations and explosions. By specifying pressure generating mechanisms, one is able to see that the current treatment of the detonics of energetic materials is only a very special - but powerful - case of explosion events and hazards. It becomes clear that physical explosions must be taken into account in any safety considerations. In these terms it is easy to understand why even liquid carbon dioxide and inert silo materials can explode. A unique collection of unexpected events, which might surprise even specialists, has resulted from the evaluation of the model.-
Download or read book High Explosives Propellants Pyrotechnics written by Ernst-Christian Koch and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-01-18 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dictionary contains 739 entries with about 1400 references to the primary literature. Details on the composition, performance, sensitivity and other pertinent properties of Energetic Materials such as High Explosives, Propellants, Pyrotechnics, as well as important ingredients such as Oxidizers, Fuels, Binders, and Modifiers are given and presented partly in over 180 tables with more than 240 structural formulas . In detail the dictionary gives elaborate descriptions of 460 Chemical Substances 170 Pyrotechnic Compositions 360 High Explosive and Propellant Formulations In addition, the basic physical and thermochemical properties of 435 pure substances (elements & compounds) typically occuring as ingredients or reaction products are given too. 150 Figures, schemes and diagrams explain Applications, Test methods, Scientific facilities, and finally Individuals closely tied with the development and investigation of Energetic Materials. The book is intended for readers with a technical or scientific background, active in governmental agencies, research institutes, trade and industry, concerned with the procurement, development, manufacture, investigation and use of Energetic Materials, such as High Explosives, Propellants, Pyrotechnics, Fireworks and Ammunition. The book serves both as a daily reference for the experienced as well as an introduction for the newcomer to the field.
Download or read book Adiabatic Shear Localization written by Bradley Dodd and published by Elsevier. This book was released on 2012-05-22 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rev. ed. of: Adiabatic shear localization / Y. Bai and B. Dodd. 1992. 1st ed.
Download or read book Organic Azides written by Stefan Bräse and published by John Wiley & Sons. This book was released on 2011-09-23 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most current state-of-the-art overview of this important class of compounds, encompassing many new and emerging applications The number of articles on organic azides continues to increase tremendously; on average, there are more than 1000 new publications a year Covers basic chemistry as well as state-of-the-art applications in life science and materials science World-ranked authors describe their own research in the wider context of azide chemistry Includes a chapter on safe synthesis and handling (azides can decompose explosively)
Download or read book Ballistics written by Donald E. Carlucci and published by CRC Press. This book was released on 2013-08-26 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing new chapters, homework problems, case studies, figures, and examples, Ballistics: Theory and Design of Guns and Ammunition, Second Edition encourages superior design and innovative applications in the field of ballistics. It examines the analytical and computational tools used to predict a weapon’s behavior in terms of pressure, stress, and velocity, demonstrating their applications in ammunition and weapons design. What’s New in the Second Edition: Includes computer examples in Mathcad (available on the CRC website) Adds a section of color plates, to better help readers visualize the physical concepts of ballistics Contains sections on modern explosives equations of state for detonation physics modeling and on probability of hit Provides a solutions manual for those teaching college and training courses This book covers exterior ballistics, exploring the physics behind trajectories, including linear and nonlinear aeroballistics, and focuses on the effects of projective impact, including details on shock physics, shaped charges, penetration, fragmentation, and wound ballistics. Reviews and integrates the fundamental science and engineering concepts involved in guns and ammunition Uses straightforward, easy-to-read style, and careful development of complex topics Shares insights rooted in the experience of renowned experts, many associated with the National Defense Industrial Association (NDIA) and International Ballistics Society The field of ballistics comprises three main areas of specialization: interior, exterior, and terminal ballistics. This book explains all three areas, offering a seamless presentation of the complex phenomena that occur during the launch, flight, and impact of a projectile.
Download or read book Microscopic Theory of Detonation in Solids written by C. E. Melton and published by . This book was released on 1969 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detonation theory based on a microscopic model of a solid has been developed. This was accomplished by considering known physical and chemical properties of the individual molecules in the system. The results show that molecular vibrational energies, normal lattice frequencies and activation energies are the most important parameters in the model. Molecules having low vibrational energies are easier to detonate, according to the theory, because of the ease of creation of a population inversion or 'hot spot' in the system. A 'perfect crystal' would be more difficult to detonate because initiation would occur at one of the faces. However, the model shows that perfect crystals of unstable solids cannot be grown. Consequently, detonation in any real crystal will be initiated in the interior near a defect. The present model explains many experimental observations that cannot be explained on the basis of older theories of detonation. For example, the microscopic theory can easily explain the occurrence of explosions during growth of crystals from solutions. (Author).
Download or read book The British National Bibliography written by Arthur James Wells and published by . This book was released on 2003 with total page 2248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2626 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Properties of Energetic Materials written by Mohammad Hossein Keshavarz and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-10-25 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a chemist who is concerned with the synthesis of new energetic compounds, it is essential to be able to assess physical and thermodynamic properties, as well as the sensitivity, of possible new energetic compounds before synthesis is attempted. Various approaches have been developed to predict important aspects of the physical and thermodynamic properties of energetic materials including (but not limited to): crystal density, heat of formation, melting point, enthalpy of fusion and enthalpy of sublimation of an organic energetic compound. Since an organic energetic material consists of metastable molecules capable of undergoing very rapid and highly exothermic reactions, many methods have been developed to estimate the sensitivity of an energetic compound with respect to detonationcausing external stimuli such as heat, friction, impact, shock and electrostatic discharge. This book introduces these methods and demonstrates those methods which can be easily applied.
Download or read book Risk Assessment Methods written by V.T. Covello and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much has already been written about risk assessment. Epidemiologists write books on how risk assessment is used to explore the factors that influence the distribution of disease in populations of people. Toxicologists write books on how risk assess ment involves exposing animals to risk agents and concluding from the results what risks people might experience if similarly exposed. Engineers write books on how risk assessment is utilized to estimate the risks of constructing a new facility such as a nuclear power plant. Statisticians write books on how risk assessment may be used to analyze mortality or accident data to determine risks. There are already many books on risk assessment-the trouble is that they all seem to be about different sUbjects! This book takes another approach. It brings together all the methods for assessing risk into a common framework, thus demonstrating how the various methods relate to one another. This produces four important benefits: • First, it provides a comprehensive reference for risk assessment. This one source offers readers concise explanations of the many methods currently available for describing and quantifying diverse types of risks. • Second, it consistently evaluates and compares available risk assessment methods and identifies their specific strengths and limitations. Understand ing the limitations of risk assessment methods is important. The field is still in its infancy, and the problems with available methods are disappoint ingly numerous. At the same time, risk assessment is being used.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.
Download or read book Combustion Flames and Explosions of Gases written by Bernard Lewis and published by Academic Press. This book was released on 2013-10-22 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion, Flames, and Explosions of Gases, Second Edition focuses on the processes, methodologies, and reactions involved in combustion phenomena. The publication first offers information on theoretical foundations, reaction between hydrogen and oxygen, and reaction between carbon monoxide and oxygen. Discussions focus on the fundamentals of reaction kinetics, elementary and complex reactions in gases, thermal reaction, and combined hydrogen-carbon monoxide-oxygen reaction. The text then elaborates on the reaction between hydrocarbons and oxygen and combustion waves in laminar flow. The manuscript tackles combustion waves in turbulent flow and air entrainment and burning of jets of fuel gases. Topics include effect of turbulence spectrum and turbulent wrinkling on combustion wave propagation; ignition of high-velocity streams by hot solid bodies; burners with primary air entrainment; and description of jet flames. The book then takes a look at detonation waves in gases; emission spectra, ionization, and electric-field effects in flames; and methods of flame photography and pressure recording. The publication is a valuable reference for readers interested in combustion phenomena.
Download or read book Handbook of Shock Waves written by Gabi Ben-Dor and published by Academic Press. This book was released on 2001-01-01 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Orbital Debris written by National Research Council and published by National Academies Press. This book was released on 1995-07-07 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the beginning of space flight, the collision hazard in Earth orbit has increased as the number of artificial objects orbiting the Earth has grown. Spacecraft performing communications, navigation, scientific, and other missions now share Earth orbit with spent rocket bodies, nonfunctional spacecraft, fragments from spacecraft breakups, and other debris created as a byproduct of space operations. Orbital Debris examines the methods we can use to characterize orbital debris, estimates the magnitude of the debris population, and assesses the hazard that this population poses to spacecraft. Potential methods to protect spacecraft are explored. The report also takes a close look at the projected future growth in the debris population and evaluates approaches to reducing that growth. Orbital Debris offers clear recommendations for targeted research on the debris population, for methods to improve the protection of spacecraft, on methods to reduce the creation of debris in the future, and much more.
Download or read book Government Reports Annual Index written by and published by . This book was released on 1989 with total page 1148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Renewable Hydrogen Technologies written by Luis M Gandia and published by Newnes. This book was released on 2013-05-03 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fields covered by the hydrogen energy topic have grown rapidly, and now it has become clearly multidisciplinary. In addition to production, hydrogen purification and especially storage are key challenges that could limit the use of hydrogen fuel. In this book, the purification of hydrogen with membrane technology and its storage in "solid" form using new hydrides and carbon materials are addressed. Other novelties of this volume include the power conditioning of water electrolyzers, the integration in the electric grid of renewable hydrogen systems and the future role of microreactors and micro-process engineering in hydrogen technology as well as the potential of computational fluid dynamics to hydrogen equipment design and the assessment of safety issues. Finally, and being aware that transportation will likely constitute the first commercial application of hydrogen fuel, two chapters are devoted to the recent advances in hydrogen fuel cells and hydrogen-fueled internal combustion engines for transport vehicles. Hydrogen from water and biomass considered Holistic approach to the topic of renewable hydrogen production Power conditioning of water electrolyzers and integration of renewable hydrogen energy systems considered Subjects not included in previous books on hydrogen energy Micro process technology considered Subject not included in previous books on hydrogen energy Applications of CFD considered Subject not included in previous books on hydrogen energy Fundamental aspects will not be discussed in detail consciously as they are suitably addressed in previous books Emphasis on technological advancements Chapters written by recognized experts Up-to date approach to the subjects and relevant bibliographic references
