Download or read book ASSESSMENT EVALUATION OF STRUCTURE USING ADVANCED UNDISTRUCTIVE METHODS written by Dr. Ashad Ullah Qureshi and published by Concepts Books Publication. This book was released on 2022-06-01 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reinforced and pre-stressed concrete are widely used for the construction of infrastructures such as bridges, industrial structures, buildings, etc. Most of the time, the quality of the concrete mix is assumed to be guaranteed but due to the congestion of reinforcement and the quality control exercised during placing and vibrating, honeycombs and voids are likely to be present in the hardened concrete. The presence of voids leads to the early deterioration of concrete and corrosion also sets in. The corrosion of reinforcement causes damage to the cover concrete and also section loss in the area of steel. In the case of pre-stressed concrete members, the corrosion leads to a catastrophic failure without any warning. Hence, it becomes necessary to evaluate the condition of concrete using Non Destructive Techniques (NDT) and Partially Destructive Techniques (PDT). The Ultrasonic Pulse Velocity (UPV) method which is widely adopted till now gives the relative quality and integrity of concrete and is based on the transit time. The rebound hammer gives the quality of concrete in the cover zone based on the rebound number.
Download or read book Non Destructive Techniques for the Evaluation of Structures and Infrastructure written by Belén Riveiro and published by CRC Press. This book was released on 2016-04-04 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview and up-to-date synthesis of the most commonly used non-destructive technologies for the reverse engineering of built infrastructure facilities. These technologies tackle both the geometric and radiometric characterization of built structures, and thus, validated technologies such as laser scanning, photogrammetry, and
Download or read book Non Destructive Assessment of Concrete Structures Reliability and Limits of Single and Combined Techniques written by Denys Breysse and published by Springer Science & Business Media. This book was released on 2012-01-21 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives information on non destructive techniques for assessment of concrete structures. It synthesizes the best of international knowledge about what techniques can be used for assessing material properties (strength) and structural properties (geometry, defects...). It describes how the techniques can be used so as to answer a series of usual questions, highlighting their capabilities and limits, and providing advices for a better use of techniques. It also focuses on possible combinations of techniques so as to improve the assessment. It is based on many illustrative examples and give in each case references to standards and guidelines.
Download or read book Aerospace Materials and Material Technologies written by N. Eswara Prasad and published by Springer. This book was released on 2016-11-07 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a comprehensive resource on various traditional, advanced and futuristic material technologies for aerospace applications encompassing nearly 20 major areas. Each of the chapters addresses scientific principles behind processing and production, production details, equipment and facilities for industrial production, and finally aerospace application areas of these material technologies. The chapters are authored by pioneers of industrial aerospace material technologies. This book has a well-planned layout in 4 parts. The first part deals with primary metal and material processing, including nano manufacturing. The second part deals with materials characterization and testing methodologies and technologies. The third part addresses structural design. Finally, several advanced material technologies are covered in the fourth part. Some key advanced topics such as “Structural Design by ASIP”, “Damage Mechanics-Based Life Prediction and Extension” and “Principles of Structural Health Monitoring” are dealt with at equal length as the traditional aerospace materials technology topics. This book will be useful to students, researchers and professionals working in the domain of aerospace materials.
Download or read book Advances in Non destructive Evaluation written by C. K. Mukhopadhyay and published by Springer Nature. This book was released on 2021-06-28 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the proceedings of the Conference and Exhibition on Non Destructive Evaluation, (NDE 2019). The contents of the book encompass a vast spectrum from Conventional to Advanced NDE including novel methods, instrumentation, sensors, procedures and data analytics as applied to all industry segments for quality control, periodic maintenance, life estimation, structural integrity and related areas. This book will be a useful reference for students, researchers and practitioners.
Download or read book Handbook of Materials Failure Analysis With Case Studies from the Construction Industries written by Abdel Salam Hamdy Makhlouf and published by Butterworth-Heinemann. This book was released on 2018-04-27 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Materials Failure Analysis: With Case Studies from the Construction Industry provides a thorough understanding of the reasons materials fail in certain situations, covering important scenarios including material defects, mechanical failure due to various causes, and improper material selection and/or corrosive environment. The book begins with a general overview of materials failure analysis and its importance, and then logically proceeds from a discussion of the failure analysis process, types of failure analysis, and specific tools and techniques, to chapters on analysis of materials failure from various causes. Failure can occur for several reasons, including: materials defects-related failure, materials design-related failure, or corrosion-related failures. The suitability of the materials to work in a definite environment is an important issue. The results of these failures can be catastrophic in the worst case scenarios, causing loss of life. This important reference covers the most common types of materials failure, and provides possible solutions. - Provides the most up-to-date and balanced coverage of failure analysis, combining foundational knowledge and current research on the latest developments and innovations in the field - Offers an ideal accompaniment for those interested in materials forensic investigation, failure of materials, static failure analysis, dynamic failure analysis, and fatigue life prediction - Presents compelling new case studies from key industries to demonstrate concepts and to assist users in avoiding costly errors that could result in catastrophic events
Download or read book Non Destructive Evaluation NDE of Polymer Matrix Composites written by Vistasp M. Karbhari and published by Elsevier. This book was released on 2013-06-30 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increased use of polymer matrix composites in structural applications has led to the growing need for a very high level of quality control and testing of products to ensure and monitor performance over time. Non-destructive evaluation (NDE) of polymer matrix composites explores a range of NDE techniques and the use of these techniques in a variety of application areas.Part one provides an overview of a range of NDE and NDT techniques including eddy current testing, shearography, ultrasonics, acoustic emission, and dielectrics. Part two highlights the use of NDE techniques for adhesively bonded applications. Part three focuses on NDE techniques for aerospace applications including the evaluation of aerospace composites for impact damage and flaw characterisation. Finally, the use of traditional and emerging NDE techniques in civil and marine applications is explored in part four.With its distinguished editor and international team of expert contributors, Non-destructive evaluation (NDE) of polymer matrix composites is a technical resource for researchers and engineers using polymer matrix composites, professionals requiring an understanding of non-destructive evaluation techniques, and academics interested in this field. - Explores a range of NDE and NDT techniques and considers future trends - Examines in detail NDE techniques for adhesively bonded applications - Discusses NDE techniques in aerospace applications including detecting impact damage, ultrasonic techniques and structural health monitoring
Download or read book Cultural Heritage Conservation and Environmental Impact Assessment by Non Destructive Testing and Micro Analysis written by Rene van Grieken and published by CRC Press. This book was released on 2005-09-27 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book mostly contains contributions by the invited lecturers at the 7th International Conference on Non-Destructive Testing and Micro-Analysis for the Diagnostics and Conservation of the Cultural and Environmental Heritage. The contributors have all been chosen for their individual reputations and the quality of their research, but also because they represent a field deemed highly important. Hence, this book give balanced coverage of the areas that are most relevant in non-destructive testing and micro-analysis in the realm of cultural heritage. The analysis methods provide the clinical composition of cultural artifacts to elucidate their provenance, the rate of alteration as a result of exposure to the environment and the effectiveness of conservation and restoration strategies. The techniques are partially or fully non-destructive, are portable, or allow study of different parts of a heterogeneous work of art.
Download or read book Nondestructive Testing of Materials and Structures written by Oral Büyüköztürk and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 1231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition assessment and characterization of materials and structures by means of nondestructive testing (NDT) methods is a priority need around the world to meet the challenges associated with the durability, maintenance, rehabilitation, retrofitting, renewal and health monitoring of new and existing infrastructures including historic monuments. Numerous NDT methods that make use of certain components of the electromagnetic and acoustic spectrum are currently in use to this effect with various levels of success and there is an intensive worldwide research effort aimed at improving the existing methods and developing new ones. The knowledge and information compiled in this book captures the current state of the art in NDT methods and their application to civil and other engineering materials and structures. Critical reviews and advanced interdisciplinary discussions by world-renowned researchers point to the capabilities and limitations of the currently used NDT methods and shed light on current and future research directions to overcome the challenges in their development and practical use. In this respect, the contents of this book will equally benefit practicing engineers and researchers who take part in characterization, assessment and health monitoring of materials and structures.
Download or read book NDT Methods Applied to Fatigue Reliability Assessment of Structures written by Jamshid Mohammadi and published by Amer Society of Civil Engineers. This book was released on 2004 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report contains nine specific-application cases of various nondestructive test (NDT) methods in fatigue and fracture reliability assessment of structures.
Download or read book Non Destructive Evaluation of Reinforced Concrete Structures written by Christiane Maierhofer and published by Elsevier. This book was released on 2010-06-04 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many concrete structures and elements of concrete infrastructure have exceeded their original design lives and are deteriorating to an extent where they are becoming dangerous. The deterioration can be internal or not obvious and therefore only shows up with detailed testing. Non-destructive evaluation of reinforced concrete structures, Volume 1: Deterioration processes and standard test methods reviews the processes of deterioration and classical and standard test methods.Part one discusses deterioration of reinforced concrete and testing problems with chapters on topics such as key issues in the non-destructive testing of concrete structures, when to use non-destructive testing of reinforced concrete structures, deterioration processes in reinforced concrete, modelling ageing and corrosion processes in reinforced concrete structures, components in concrete and their impact on quality, and predicting the service life of reinforced concrete structures. Part two reviews classical and standard testing methods including microscopic examination of deteriorated concrete, the analysis of solid components and their ratios in reinforced concrete structures, the determination of chlorides in concrete structures, and investigating the original water content of reinforced concrete structures.With its distinguished editors and international team of contributors, Non-destructive evaluation of reinforced concrete structures, Volume 1: Deterioration processes and standard test methods will be a standard reference for civil and structural engineers as well as those concerned with making decisions regarding the safety of reinforced concrete structures. - Provides a comprehensive discussion from examination of the components in concrete and their affect on quality through to the role of and tools required for lifetime management - Experts in the field identify the testing problems associated with infrastructure considering design, build and maintenance stages - Presents a guide for when to use non-destructive testing of reinforced concrete structures including the role of time in testing
Download or read book Non Destructive Testing in Civil Engineering 2000 written by T. Uomoto and published by Elsevier. This book was released on 2000-03-31 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first international symposium on NDT-CE (Non-Destructive Testing in Civil Engineering) was held in Berlin, Germany in 1991. Successive symposia were held throughout Europe until 1997. This, the 5th symposium is organized as SEIKEN SYMPOSIUM No. 26, and is sponsored by the Institute of Industrial Science, at the University of Tokyo, Japan. Original objectives of the NDT-CE symposium have been to provide an opportunity for discussing current issues and future perspectives of NDT and for promoting mutual understanding among engineers and researchers. Asia is one of the key regions for further development in NDT and this symposium in Japan will be a good opportunity not only to exchange technical information on NDT, but to promote worldwide friendship between engineers in Asian countries and other nations of the world. This volume contains 70 papers providing the most recent research results and findings. The papers are grouped under the following areas: (1) keynote papers, (2) magnetic / electric, (3) steel structures, (4) integrated test, (5) moisture, (6) strength, (7) acoustic emission, (8) various tests, (9) ultrasonic, (10) impact echo, (11) radar, (12) quality and (13) corrosion / cover.
Download or read book Army RD A Bulletin written by and published by . This book was released on 1990-07 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Army RD A written by and published by . This book was released on 1990 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research and Applications in Structural Engineering Mechanics and Computation written by Alphose Zingoni and published by CRC Press. This book was released on 2013-08-15 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research and Applications in Structural Engineering, Mechanics and Computation contains the Proceedings of the Fifth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2013, Cape Town, South Africa, 2-4 September 2013). Over 420 papers are featured. Many topics are covered, but the contributions may be seen to fall
Download or read book Handbook of Research on Seismic Assessment and Rehabilitation of Historic Structures written by Asteris, Panagiotis G. and published by IGI Global. This book was released on 2015-07-13 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rehabilitation of heritage monuments provides sustainable development and cultural significance to a region. The most sensitive aspect of the refurbishment of existing buildings lies in the renovation and recovery of structural integrity and public safety. The Handbook of Research on Seismic Assessment and Rehabilitation of Historic Structures evaluates developing contributions in the field of earthquake engineering with regards to the analysis and treatment of structural damage inflicted by seismic activity. This book is a vital reference source for professionals, researchers, students, and engineers active in the field of earthquake engineering who are interested in the emergent developments and research available in the preservation and rehabilitation of heritage buildings following seismic activity.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
