Download or read book Assessing Environmental Impacts of Construction written by Ian Dickie and published by . This book was released on 2000 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: For construction to play its part in making society more sustainable, industry decision-makers must confront social, economic and environmental implications of sustainable construction. This Digest first describes the methodology and results of a study of the relative weightings Of sustainability issues arising from buildings and construction. These are interim results but they provide a sound basis for analysing environmental effects and setting priorities for further action. In order to undertake consistent holistic analysis of the environment, it is useful for different impacts to be compared on a single scale or score (such as Ecopoints). A consensus view between all levels of decision-makers about the relative importance of different environmental issues is necessary for such a score to be calculated. The weightings determined by BRE can now be used for this purpose. Two examples of environmental analysis are described.
Download or read book Environmental Impact Assessment of Buildings written by Wahidul Biswas and published by MDPI. This book was released on 2020-02-05 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue covers a wide range of areas—including building orientation, service life, use of photocatalytically active structures and PV facades, implications of transportation system, building types (i.e., high rise, multilevel, commercial, residential), life cycle assessment, and structural engineering—that need to be considered in the environmental impact assessment of buildings, and the chapters include case studies across the globe. Consideration of these strategies would help reduce energy and material consumption, environmental emissions, and waste generation associated with all phases of a building’s life cycle. Chapter 1 demonstrates that green star concrete exhibits the same structural properties as conventional concrete in Australia. Chapter 2 showed that the use of TiO2 as a photocatalyst on the surface of construction materials with a suitable stable binding agent, such as aggregates, would enable building walls to absorb NOx from air. This study found that TiO2 has the potential to reduce ambient concentrations of NOx from areas where this pollutant becomes concentrated under solar irradiation. Chapter 3 presents the life cycle assessment of architecturally integrated glass–glass photovoltaics in building facades to find the appropriate material composition for a multicolored PV façade offering improved environmental performance. Chapter 4 shows that urban office buildings lacking appropriate orientation experienced indoor overheating. Chapter 5 details four modeling approaches that were implemented to estimate buildings’ response towards load shedding. Chapter 6 covers the life cycle GHG emissions of high-rise residential housing block to discover opportunities for environmental improvement. Chapter 7 discusses an LCA framework that took into account variation in the service life of buildings associated with the use of different types of materials. Chapter 8 presents a useful data mining algorithm to conduct life cycle asset management in residential developments built on transport systems.
Download or read book Seismic Performance Assessment of Buildings Methodology for assessing environmental impacts written by and published by . This book was released on 2018 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Assessing and Measuring Environmental Impact and Sustainability written by Jiří Jaromír Klemeš and published by Butterworth-Heinemann. This book was released on 2015-01-20 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assessing and Measuring Environmental Impact and Sustainability answers the question “what are the available methodologies to assess the environmental sustainability of a product, system or process?” Multiple well-known authors share their expertise in order to give a broad perspective of this issue from a chemical and environmental engineering perspective. This mathematical, quantitative book includes many case studies to assist with the practical application of environmental and sustainability methods. Readers learn how to efficiently assess and use these methods. This book summarizes all relevant environmental methodologies to assess the sustainability of a product and tools, in order to develop more green products or processes. With life cycle assessment as its main methodology, this book speaks to engineers interested in environmental impact and sustainability. Helps engineers to assess, evaluate, and measure sustainability in industry Provides workable approaches to environmental and sustainability assessment Readers learn tools to assess the sustainability of a process or product and to design it in an environmentally friendly way
Download or read book Restoring Our Natural Habitat written by Karen C. Kabbes and published by . This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Examining the Environmental Impacts of Materials and Buildings written by Blaine Erickson Brownell and published by Engineering Science Reference. This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book explores the environmental impact of building design, construction, maintenance, demolition, and related activities"--
Download or read book Life cycle Assessment in Building and Construction written by Shpresa Kotaji and published by SETAC. This book was released on 2003 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Assessing Environmental Impacts of Site Activities During Construction of Milwaukee School of Engineering s Kern Center Site and Concrete Construction written by Robert G. Brillhart and published by . This book was released on 2007 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project develops a baseline characterization of input flows of construction materials, fuels and water; materials remaining on site as stock; and outputs to the environment as waste and emissions for Construction Specification Institute (CSI) division 31 (site work) and 3 (concrete construction) for construction of the Milwaukee School of Engineering Kern Center.
Download or read book Environmental Impact Assessment EIA Simplified GrG written by GEORGE ALEX and published by BlueRose Publishers. This book was released on 2020-01-09 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: EIA, or Environmental Impact Assessment, is a subject that deals with the impacts of any project on the environment and all the ecosystems connected with it. There are certain procedures that are standardised, which we follow from the beginning of a project before it is sanctioned. The book covers a study of almost all the possible impacts upon the surrounding environment and the efforts to control or mitigate them before the project's commencement or during the development of the project or after its execution. Certain issues surrounding the implementation of projects inducing air or water pollution can be mitigated through certain standardisations for the concentration of pollutants that is allowed in the upper limits. Also, the assessment of all the impacts before and after the project are carried out and studied as a whole to reduce the impacts further....
Download or read book Methods of Environmental Impact Assessment written by Peter Morris and published by Taylor & Francis. This book was released on 2001 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by experts, this text deals with how environmental impact assessment should be carried out for specific environmental components such as air and water.
Download or read book Eco efficient Construction and Building Materials written by Fernando Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2014-02-14 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eco-efficient Construction and Building Materials reviews ways of assessing the environmental impact of construction and building materials. Part one discusses the application of life cycle assessment (LCA) methodology to building materials as well as eco-labeling. Part two includes case studies showing the application of LCA methodology to different types of building material, from cement and concrete to wood and adhesives used in building. Part three includes case studies applying LCA methodology to particular structures and components. Reviews ways of assessing the environmental impact of construction and building materials Provides a thorough overview, including strengths and shortcomings, of the life cycle assessment (LCA) and eco-labeling of eco-efficient construction and building materials Includes case studies showing the application of LCA methodology to different types of building material, from cement and concrete to wood and adhesives used in building
Download or read book Life Cycle Assessment in the Built Environment written by Robert Crawford and published by Routledge. This book was released on 2011-03-10 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Life cycle assessment enables the identification of a broad range of potential environmental impacts occurring across the entire life of a product, from its design through to its eventual disposal or reuse. The need for life cycle assessment to inform environmental design within the built environment is critical, due to the complex range of materials and processes required to construct and manage our buildings and infrastructure systems. After outlining the framework for life cycle assessment, this book uses a range of case studies to demonstrate the innovative input-output-based hybrid approach for compiling a life cycle inventory. This approach enables a comprehensive analysis of a broad range of resource requirements and environmental outputs so that the potential environmental impacts of a building or infrastructure system can be ascertained. These case studies cover a range of elements that are part of the built environment, including a residential building, a commercial office building and a wind turbine, as well as individual building components such as a residential-scale photovoltaic system. Comprehensively introducing and demonstrating the uses and benefits of life cycle assessment for built environment projects, this book will show you how to assess the environmental performance of your clients’ projects, to compare design options across their entire life and to identify opportunities for improving environmental performance.
Download or read book Environmental Management in Construction written by Heng Li and published by Routledge. This book was released on 2007-01-24 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demands on the construction industry are changing, and it is now virtually essential for environmental management to be considered at all stages of a project. Many construction managers are finding a quantitative approach useful, and this book outlines four quantitative methods which can be applied at different construction stages, and which fit within a comprehensive framework of dynamic Environmental Impact Assessment (EIA). These include: a method to quantitatively evaluate and reduce pollution and hazards levels a method to evaluate the environmental-consciousness of proposed construction plans a method to reduce on-site construction wastes through an incentive reward programme a method to promote C and D waste exchange in the local construction industry. With an experimental case study of the application of these methods, this book delivers a comprehensive review of environmental management issues in construction. With regulatory requirements potentially favouring the quantitative approach, this timely guide ensures that contractors will be able to keep pace with environmental management standards.
Download or read book Examining the Environmental Impacts of Materials and Buildings written by Brownell, Blaine Erickson and published by IGI Global. This book was released on 2020-02-28 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental environmental challenges such as climate change, resource depletion, and pollution are still widely relevant in today’s world. Many of these problems have been associated with the architecture, engineering, and construction industries due to the level of resources used in these professions. In recent years, many manufacturers in these fields have expressed the motivation to make necessary changes that would be beneficial to the environment. Despite this progress, there remains a lack of research and assessment on the methods to achieve environmental stability within these architectural fields. Examining the Environmental Impacts of Materials and Buildings provides emerging research exploring the theoretical and practical aspects of ecological performance within modern building design and materials-based construction. Featuring coverage on a broad range of topics such as life cycle assessment, material flows analysis, and sustainability, this book is ideally designed for architects, civil engineers, construction professionals, environmentalists, ecologists, business practitioners, scientists, policymakers, designers, researchers, and academicians seeking research on current trends in environmental performance within building design.
Download or read book Sustainable Construction Techniques written by Sebastian El Khouli and published by . This book was released on 2015-06-01 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: What makes building materials sustainable? How to reduce the amount of embodied energy in building constructions? And how does a Life Cycle Analysis work? These are questions which are becoming increasingly more common in the context of sustainable construction. The DETAIL Green Book "Sustainable Construction Techniques" offers a thorough guide to ecological building design and sustainable construction methods, which will be particularly valuable for architects. The authors provide an overview of the most relevant databases and certification standards for building products and illustrate how a Life Cycle Analysis is conducted. They also identify key ways of optimising the planning process in line with ecological criteria, while offering advice for the selection of building materials and elements. Detailed documentation from five buildings constructed in Europe and North America serve to illustrate the associated assessment processes in this book.
Download or read book Ecological Footprint Assessment of Building Construction written by Jaime Solis-Guzman and published by Bentham Science Publishers. This book was released on 2015-10-21 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainability is a major concern when considering the construction of a new building project as there is a definite effect of any construction on its surrounding environment. One tool to measure the environmental impact of projects is the Ecological Footprint (EF). Ecological Footprint Assessment of Building Construction: Spanish Case Study presents the methodology required for the creation of an effective EF assessment of building construction projects with a case study of a Spanish project. The book starts with a detailed overview of the EF indicator for buildings including definitions, methodologies and scale applications. This is followed by chapters on dwelling construction methodology and calculation models for direct (energy and water), indirect (manpower and construction materials) resource consumption and waste in the constructed area. The book concludes with a case study that demonstrates the application of all types of EF indicators mentioned in the previous chapters. The methodology and all steps for each calculation are explained in detail, making the book an applicable reference for working professionals as well as an easy-to-understand guide for graduates undertaking sustainability modules in ecology and civil engineering courses
Download or read book Environmental Impact Assessments and Mitigation written by Musaida Mercy Manyuchi and published by CRC Press. This book was released on 2020-12-10 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Impact Assessments and Mitigation examines various assessments for developmental projects in the housing, mining, energy, and waste management areas. As the world continues to shift toward concerns over climate change and environmental protection issues, developmental projects must have environmental impact assessments (EIA) conducted as well as environmental management plans (EMP). This book describes how all phases of a project, from planning, to operation, to post operation, must consider potential environmental impacts and their mitigation. Features: Presents numerous sustainable development considerations for key industries Discusses how environmental impact assessments are prepared for each stage of a project Describes different environmental management plans for established projects Offers mitigation plans for various potential environmental impacts Includes practical examples from the construction, manufacturing, transport, and mining industries Useful for practicing professional engineers as well as upper-level students, this book covers all aspects of environmental impact assessments from start to finish.
