Download or read book Assembly of Molecular Nanomagnets Into Nanogap Electrodes by Dielectrophoresis Realization of Bioelectronic Devices for Electrical Measurement of Ionic Current Through Membrane Protein Channels written by Yaser Vaheb and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis consists of two parts. The two parts correspond to two different subjects but with a common feature which is the fabrication of nanometer scale devices for low current measurements. The first part investigated the assembly of Prussian blue and Cs-Co-Cr Prussian blue analogue molecular nanomagnets into nano-patterned electrodes. The ever growing need for higher performance processors and higher storage densities has pushed the CMOS technology commonly used in industry to its physical limitations toward its miniaturization. Molecular electronics and molecular spintronics prove to be promising alternatives for the CMOS in future nanoelectronic devices. Pd or Au gaps with ~ 7-50 nm width were fabricated on a Si/SiO2 substrate using standard electron beam lithography, metal deposition and lift-off. Nanomagnets were positioned between the gaps via AC dielectrophoresis (DEP). At room temperature, the Cs-Co-Cr Prussian blue analogue nanoparticles exhibited negligible current whereas junction with Prussian blue nanoparticles exhibited ~ 30 pA at ~ 1 V. Water trapped in nanogaps was found to seriously alter current measurements. This problem was solved by heating samples prior to measurements. A simplified DEP simulation program using Delphi was developed, which neglected Brownian motion and fluid dynamics but allowed us to better understand the DEP process. The second part of the thesis investigated the fabrication of devices for measuring electrical currents through membrane protein channels. Membrane-embedded protein channels are the basis of various physiological processes like nervous communication, muscular contraction, tactile sensation, and so on. Electrical measurements are used in different applications such as drug screening in pharmaceutical industry and biosensors. The standard method to perform such measurements is the use of patch-clamp. However, this method requires intense skill and heavy equipment while it exhibits low measurement efficiency. A solution to these drawbacks is the development of planar patch clamps, which are scalable, automated and easier to use. The first device fabrication step was the patterning of Au/Ag electrodes on thermally oxidized Si substrate by optical lithography, metallization and lift-off. Secondly, a passivation layer of Si3N4/SiO2 was deposited on top of electrodes by PECVD. Then micro-holes were formed inside the Si3N4/SiO2 passivation layer stack using Raith-150 e-beam lithography and reactive ion etching. Finally, Ag layer was converted to AgCl using bleach. The test of electrical current was done using Axopatch patch-clamp amplifier. Current versus time measurements for different voltages were recorded without membrane covering the holes, and an electrical model has been developed for the fabricated devices.
Download or read book Membrane Protein Incorporation Into Nano bioelectronics written by Ramya Tunuguntla and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Biological systems use different energy sources to interact with their environments by creating ion gradients, membrane electric potentials, or a proton motive force to accomplish strikingly complex tasks on the nanometer length scale, such as energy harvesting, and whole organism replication. Most of this activity involves a vast arsenal of active and passive ion channels, membrane receptors and ion pumps that mediate complex and precise transport across biological membranes. Despite the remarkable rate of progress exhibited by modern microelectronic devices, they still cannot compete with the efficiency and precision of biological systems on the component level. At the same time, the sophistication of these molecular machines provides an excellent opportunity to use them in hybrid bioelectronic devices where such a combination could deliver enhanced electronic functionality and enable seamless bi-directional interfaces between man-made and biological assemblies. Artificial membrane systems allow researchers to study the structure and function of membrane proteins in a matrix that approximates their natural environment and to integrate these proteins in ex-vivo devices such as electronic biosensors, thin-film protein arrays, or bio-fuel cells. Since most membrane proteins have vectorial functions, both functional studies and applications require effective control over protein orientation within a lipid bilayer. In our work, we have explored the role of the bilayer surface charge in determining transmembrane protein orientation and functionality during formation of proteoliposomes. We reconstituted a model vectorial ion pump, proteorhodopsin, in liposomes of opposite charges and varying charge densities and determined the resultant protein orientation. Antibody-binding assay and proteolysis of proteoliposomes showed physical evidence of preferential orientation, and functional assays verified vectorial nature of ion transport in this system. Our results indicate that the manipulation of lipid composition can indeed control orientation of an asymmetrically charged membrane protein, proteorhodopsin, in liposomes. One-dimensional inorganic nanostructures, which have critical dimensions comparable to the sizes of biological molecules, form an excellent materials platform for building such integrated structures. Researchers already use silicon nanowire-based field effect transistors functionalized with molecular recognition sites in a diverse array of biosensors. In our group, we have been developing a platform for integration of membrane protein functionality and electronic devices using a 1-D phospholipid bilayer device architecture. In these devices, the membrane proteins reside within the lipid bilayer that covers a nanowire channel of a field-effect transistor. This lipid bilayer performs several functions: it shields the nanowire from the solution species; it serves as a native-like environment for membrane proteins and preserves their functionality, integrity, and even vectorality. In this work, we show that a 1-D bilayer device incorporating a rhodopsin proton pump allows us to couple light-driven proton transport to a bioelectronic circuit. We also report that we were able to adapt another distinctive feature of biological signal processing -their widespread use of modifiers, co-factors, and mediator molecules to regulate and fine-tune the operational characteristics of the bioelectronic device. In our example, we use co-assembly of protein channels and ionophores in the 1-D bilayer to modify the device output levels and response time.
Download or read book NanoBioEngineering written by Bhupinder Singh and published by CRC Press. This book was released on 2018-11-02 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to provide the fundamental comprehension of a broad range of topics in an integrated volume such that readership hailing from diverse disciplines can rapidly acquire the necessary background for applying it in pertinent research and development field.
Download or read book NanoBioTechnology written by Oded Shoseyov and published by Springer Science & Business Media. This book was released on 2008-02-07 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: NanoBiotechnology is a groundbreaking text investigating the recent advances and future direction of nanobiotechnology. It will assist scientists and students in learning the fundamentals and cutting-edge nature of this new and emerging science. Focusing on materials and building blocks for nanotechnology, leading scientists from around the world share their knowledge and expertise in this authoritative volume.
Download or read book Biomaterials for 3D Tumor Modeling written by Subhas C. Kundu and published by Elsevier. This book was released on 2020-08-22 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomaterials for 3D Tumor Modeling reviews the fundamentals and most relevant areas of the latest advances of research of 3D cancer models, focusing on biomaterials science, tissue engineering, drug delivery and screening aspects. The book reviews advanced fundamental topics, including the causes of cancer, existing cancer models, angiogenesis and inflammation during cancer progression, and metastasis in 3D biomaterials. Then, the most relevant biomaterials are reviewed, including methods for engineering and fabrication of biomaterials. 3D models for key biological systems and types of cancer are also discussed, including lung, liver, oral, prostate, pancreatic, ovarian, bone and pediatric cancer. This book is suitable for those working in the disciplines of materials science, biochemistry, genetics, molecular biology, drug delivery and regenerative medicine. Reviews key biomaterials topics, including synthetic biomaterials, hydrogels, e-spun materials and nanoparticles Provides a comprehensive overview of 3D cancer models for key biological systems and cancer types Includes an overview of advanced fundamental concepts for an interdisciplinary audience in materials science, biochemistry, regenerative medicine and drug delivery
Download or read book Sensors and Microsystems written by G. Di Francia and published by Springer Nature. This book was released on 2020-02-21 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book showcases the state of the art in the field of sensors and microsystems, revealing the impressive potential of novel methodologies and technologies. It covers a broad range of aspects, including: bio-, physical and chemical sensors; actuators; micro- and nano-structured materials; mechanisms of interaction and signal transduction; polymers and biomaterials; sensor electronics and instrumentation; analytical microsystems, recognition systems and signal analysis; and sensor networks, as well as manufacturing technologies, environmental, food and biomedical applications. The book gathers a selection of papers presented at the 20th AISEM National Conference on Sensors and Microsystems, held in Naples, Italy in February 2019, the event brought together researchers, end users, technology teams and policy makers.
Download or read book Nanomaterials for Sustainable Energy written by Quan Li and published by Springer. This book was released on 2016-05-12 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the unique mechanical, electrical, and optical properties of nanomaterials, which play an important role in the recent advances of energy-related applications. Different nanomaterials have been employed in energy saving, generation, harvest, conversion, storage, and transport processes very effectively and efficiently. Recent progress in the preparation, characterization and usage of 1D, 2D nanomaterials and hybrid architectures for energy-related applications and relevant technologies and devices, such as solar cells, thermoelectronics, piezoelectronics, solar water splitting, hydrogen production/storage, fuel cells, batteries, and supercapacitors is covered. Moreover, the book also highlights novel approaches in nanomaterials design and synthesis and evaluating materials sustainability issues. Contributions from active and leading experts regarding important aspects like the synthesis, assembly, and properties of nanomaterials for energy-related applications are compiled into a reference book. As evident from the diverse topics, the book will be very valuable to researchers working in the intersection of physics, chemistry, biology, materials science and engineering. It may set the standard and stimulates future developments in this rapidly emerging fertile frontier of nanomaterials for energy.
Download or read book Smart Sensors Networks written by Fatos Xhafa and published by Academic Press. This book was released on 2017-06-14 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Sensors Networks: Communication Technologies and Intelligent Applications explores the latest sensor and sensor networks techniques and applications, showing how networked wireless sensors are used to monitor and gather intelligence from our surrounding environment. It provides a systematic look at the unique characteristics of wireless sensor networks through their usage in a broad range of areas, including healthcare for the elderly, energy consumption, industrial automation, intelligent transportation systems, smart homes and cities, and more. The book shows how sensor-networks work and how they are applied to monitor our surrounding environment. It explores the most important aspects of modern sensors technologies, providing insights on the newest technologies and the systems needed to operate them. Readers will find the book to be an entry point for understanding the fundamental differences between the various sensor technologies and their use in for different scenarios. Indexing: The books of this series are submitted to EI-Compendex and SCOPUS Presents numerous specific use-cases throughout, showing practical applications of concepts Contains contributions from leading experts around the globe Collects, in one place, the latest thinking on an emerging topic Addresses the security and privacy issues inherent in sensor deployment
Download or read book Luminescence and Display Materials written by U. Happek and published by The Electrochemical Society. This book was released on 2011-04 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers included in this issue of ECS Transactions were originally presented in the symposia ¿Tutorials in Nanotechnology: Focus on Luminescence and Display Materials¿, ¿Luminescence and Energy Efficiency¿, and ¿ Physics and Chemistry of Luminescence and Display Materials¿ held during the 218th meeting of The Electrochemical Society, in Las Vegas, Nevada, from October 10 to 15, 2010.
Download or read book Peptide Self Assembly written by Bradley L. Nilsson and published by Humana. This book was released on 2018-05-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume details methods and protocols on b-sheet assemblies and collagen. Divided into three parts chapters focus on expanding use of solid-state NMR as a powerful method to enhance structural understanding of self-assembled peptide materials, methods for the design, synthesis, and application of self-assembled peptide materials, and structural and mechanistic analyses of pathological amyloid systems that provide novel ways to assess function of the various possible aggregates as well to determine how the structure of these materials correlates to function/dysfunction in the biological context. Written in the highly successful Methods in Molecular Biology series format, chapters include introductions to their respective topics, lists of the necessary materials and reagents, step-by-step, readily reproducible laboratory protocols, and tips on troubleshooting and avoiding known pitfalls. Authoritative and cutting-edge, Peptide Self-Assembly: Methods and Protocols aims to capture modern methods that span the breadth of the exciting and expanding field of peptide self-assembly.
Download or read book Olfactory Receptors written by Chiquito J. Crasto and published by Humana Press. This book was released on 2013-04-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the best efforts of many and despite landmark discoveries and experimental ingenuity, challenges in the pursuit of research related to olfactory receptors (ORs) continue to exist. In Olfactory Receptors: Methods and Protocols, experts in the field contribute chapters that serve to address these challenges. The volume consists of several sections: knowledge dissemination of ORs, theoretical assessments of OR structure and function, as well as development and use of expression systems and experimental functional analysis. Written in the highly successful Methods in Molecular BiologyTM series format, chapters include introductions to their respective topics, lists of the necessary materials and reagents, step-by-step, readily reproducible laboratory protocols, and tips on troubleshooting and avoiding known pitfalls. Concise and practical, Olfactory Receptors: Methods and Protocols seeks to aid researchers in furthering the knowledge of olfaction and moving us ever closer to the thrilling discoveries that will follow.
Download or read book Optical System Alignment Tolerancing and Verification X written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Remote Sensing System Engineering VI written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
