Download or read book Aspects of Charge Generation on Ti Surface Using a Triboelectric Approach written by 郭嬿 and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aspects of Charge Generation on Ti Surface Using a Triboelectric Approach written by Yan Guo, Pro and published by Open Dissertation Press. This book was released on 2017-01-26 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation, "Aspects of Charge Generation on Ti Surface Using a Triboelectric Approach" by Yan, Guo, 郭嬿, was obtained from The University of Hong Kong (Pokfulam, Hong Kong) and is being sold pursuant to Creative Commons: Attribution 3.0 Hong Kong License. The content of this dissertation has not been altered in any way. We have altered the formatting in order to facilitate the ease of printing and reading of the dissertation. All rights not granted by the above license are retained by the author. Abstract: Titanium and its alloys have been widely used as materials in biomedicine and in particular, for dental implants, and one main reason is their unique ability to osseointegrate with the host bone. This phenomenon forms a strong bone-to-implant bonding. The rate and quality of osseointegration of a titanium dental implant depends heavily upon its surface properties. Over time, various surface treatment methods have been developed to further improve osseointegration of titanium-based biomaterials. This PhD thesis focuses on promising surface treatment methodology: surface charge modification. A negative charge has been known to promote the osseointegration of titanium biomaterials. Before the current work there was no practical approach to induce negative charge on titanium surfaces. The goal was to find such a practical technique. The current investigations revealed that sandblasting, a commonly used surface treatment method, can generate a negative charge on the surface of titanium, and also titanium alloy and stainless steel micro-implants, due to the triboelectric effect. Stainless steel doesn't osseointegrate. The basic methodology of these studies was to sandblast titanium and measure the amount and polarity of the static charge on titanium surfaces. The effects of several important parameters were evaluated, including the sandblasting material, the size of the blasting grits, and the shape of the titanium material. Statistical analysis was performed on the results of the static charge measurements. In addition, the contamination of the titanium sandblasting was also evaluated. The results of the current studies suggested that sandblasting could generate static charges on titanium and stainless steel surfaces. However, such charges gradually dissipate into the atmosphere. The amount, polarity, and the decay rate of the charge depend on many factors tested in the experiments. These results might explain the beneficial of sandblasting on the osseointegration of titanium implants. Osseointegration has been traditionally attributed to its roughening effects. Moreover, the current studies may potentially lead to improved sandblasting techniques, becoming in mind that more research should be carried out. DOI: 10.5353/th_b5204907 Subjects: Titanium - Therapeutic use Osseointegration

Download or read book Triboelectric Nanogenerators written by Zhong Lin Wang and published by Springer. This book was released on 2016-08-17 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces an innovative and high-efficiency technology for mechanical energy harvesting. The book covers the history and development of triboelectric nanogenerators, basic structures, working principles, performance characterization, and potential applications. It is divided into three parts: Part A illustrates the fundamental working modes of triboelectric nanogenerators with their prototype structures and theoretical analysis; Part B and Part C introduce two categories of applications, namely self-powered systems and self-powered active sensors. The book will be an ideal guide to scientists and engineers beginning to study triboelectric nanogenerators or wishing to deepen their knowledge of the field. Readers will be able to place the technical details about this technology in context, and acquire the necessary skills to reproduce the experimental setups for fabrication and measurement.

Download or read book Investigation of Triboelectric Charge Generation During Adhesive Peeling written by Sarah Chekan and published by . This book was released on 2024 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Triboelectricity is a commonly experienced natural phenomenon, yet its underlying mechanisms remain ambiguous amongst the scientific community. The inherently complex nature of triboelectricity necessitates an interdisciplinary approach to its study, integrating mechanics, material science, physics, and chemistry. Gaining a better understanding of the underlying mechanisms of triboelectricity and maximizing the predictability of charge generation will lead to the development of triboelectric nanogenerators (TENG). TENGs offer a sustainable method of powering integrated system sensors, replacing the traditional battery or capacitor that needs to be recharged or replaced after a limited time. The goal of this thesis is to investigate the mechanics of triboelectric charge generation, specifically the relationship between the separation speed of two surfaces and the resulting charge magnitude. Through imposing the well-studied and relatively simple mechanics of peeling onto a triboelectric system and through automating the peeling process to maximize the repeatability of experimental trials, the relationship between separation speed and charge generation is explored. Four experimental methods are developed to achieve the research goals, including manual and automatic procedures for both the measurement of the peel angle and generated charge. The peel angle, a key variable in all fundamental peeling equations and traditional peel test configurations, is measured through recording the unrolling of a spool of Scotch tape via manual and automatic means and measuring key angles throughout the trial in video post processing. Charge measurements are collected by an electrometer as a Scotch tape-copper tape composite is unpeeled manually and automatically. These experimental set ups are successfully modeled on traditional peel test configurations, accomplishing the objective of imposing simple mechanics onto a triboelectric system. While the focus on peeling mechanics simplified the system, the inherent complexity of adhesive properties materializes in the experimental results, specifically the adhesive stick-slip regime, adding a different layer of complexity. Experimental methods for both angle and charge that employed slower peel speeds and uniform test specimen proved to yield the most consistent and repeatable results; they were even superior to automating the process. Through developing more consistent methods of fabricating test specimen, integrating a motor controller into the system, investigating the adhesive properties of the test specimen, and integrating purposeful instabilities into the peeling process, more progress can be made in the exploration of the relationship between separation speed and triboelectric charge generation in the future.

Download or read book Micro Electro Mechanical Systems written by Qing-An Huang and published by Springer. This book was released on 2018-05-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook volume aims to provide a comprehensive, self-contained, and authoritative reference in MEMS. It covers the theoretical and practical aspects including but not limited to sensors, actuators, RF MEMS, micro fluids and bio MEMS systems. It is particularly recommended to undergraduates, postgraduates, researchers, scientists, and field experts. This comprehensive summary will provide a solid knowledge background and inspire innovations in this highly interdisciplinary field. The handbook series consists of 5 volumes: Micro/nano fabrication technology, MEMS, Nanomaterial, Nanomedicine and Applications of micro-/nanotechnologies in IT. Experienced researchers and experts are invited to contribute in each of these areas.The series is published under Springer Major Reference works, which allows continuous online update and publication. These features allow newcomers and other readers to keep in touch with the most up-to-date information in micro-/nanotechnologies.It presents an overview of the knowledge base, as well as selected topics and provides comprehensive and authoritative information on the field for researchers, engineers, scientists and graduate students who are involved in different aspects of micro-/nanotechnologies.This publication will provide inspiration for innovative research and application ideas for continued growth of the field.

Download or read book Piezoelectric Energy Harvesting written by Alper Erturk and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transformation of vibrations into electric energy through the use of piezoelectric devices is an exciting and rapidly developing area of research with a widening range of applications constantly materialising. With Piezoelectric Energy Harvesting, world-leading researchers provide a timely and comprehensive coverage of the electromechanical modelling and applications of piezoelectric energy harvesters. They present principal modelling approaches, synthesizing fundamental material related to mechanical, aerospace, civil, electrical and materials engineering disciplines for vibration-based energy harvesting using piezoelectric transduction. Piezoelectric Energy Harvesting provides the first comprehensive treatment of distributed-parameter electromechanical modelling for piezoelectric energy harvesting with extensive case studies including experimental validations, and is the first book to address modelling of various forms of excitation in piezoelectric energy harvesting, ranging from airflow excitation to moving loads, thus ensuring its relevance to engineers in fields as disparate as aerospace engineering and civil engineering. Coverage includes: Analytical and approximate analytical distributed-parameter electromechanical models with illustrative theoretical case studies as well as extensive experimental validations Several problems of piezoelectric energy harvesting ranging from simple harmonic excitation to random vibrations Details of introducing and modelling piezoelectric coupling for various problems Modelling and exploiting nonlinear dynamics for performance enhancement, supported with experimental verifications Applications ranging from moving load excitation of slender bridges to airflow excitation of aeroelastic sections A review of standard nonlinear energy harvesting circuits with modelling aspects.

Download or read book Selected Papers from the 19th International Conference on Micro and Nano Technology for Power Generation and Energy Conversion Applications Power MEMS 2019 written by Paweł Knapkiewicz and published by MDPI. This book was released on 2021-04-15 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: As users, we require more and more reliable and longer operation of electronic devices. Most often, the efforts of scientists and engineers related to energy management, energy conversion, and energy storage are overlooked. The PowerMEMS slogan in its meaning hides the science of materials enabling the construction of modern accumulators and batteries, so important for the developing consumer electronics and electromobility; energy harvesters used wherever conventional power sources cannot be used; and finally the methods and algorithms of energy processing and management that increase the efficiency of the devices they operate. This Special Issue contains six research papers selected from those presented at the 19th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (Power MEMS 2019), as and representative of all papers presented during the Conference.

Download or read book Surface Application of Paper Chemicals written by J. Brander and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the exception of a slight hiccup during the height of the recent environmental movement (during the early 1990s), when for a year or two consumers were prepared to pay a price premium for lower quality recycled paper than for the virgin product, the inexorable improvement in the quality demanded of paper products continues. This demand for quality covers not only the aesthetics ofthe product but also its performance. Moreover, it is becoming increasingly the case that papers designed for a particular use must, as it were incidentally, also perform well in alternative applications. An example is that of office and printing papers, which are expected to perform as well in copier machines as in all the various forms of impact and non-impact printers. But even greater demands are made in other product areas, where board designed for dry foods can also be expected to protect moist and fatty materials and be made of 100% recycled fibre. The need to isolate foodstuffs from some of the contaminants that can affect recycled board is a· serious challenge. Thus, papermakers are constantly striving to meet a broadening spectrum of demands on their products; often while accepting declining quality of raw materials. The product design philosophy that has arisen in response to this is increasingly to isolate the bulk of a paper from its uses: to engineer the needed performance characteristics into the paper surfaces while more or less ignoring what happens inside.

Download or read book Solid Liquid Contact Electrification written by Zong-Hong Lin and published by VCH. This book was released on 2022-12-14 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrospun Nanofibers written by Mehdi Afshari and published by Woodhead Publishing. This book was released on 2016-09-13 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrospun Nanofibers covers advances in the electrospinning process including characterization, testing and modeling of electrospun nanofibers, and electrospinning for particular fiber types and applications. Electrospun Nanofibers offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science. Electrospinning is the most commercially successful process for the production of nanofibers and rising demand is driving research and development in this field. Rapid progress is being made both in terms of the electrospinning process and in the production of nanofibers with superior chemical and physical properties. Electrospinning is becoming more efficient and more specialized in order to produce particular fiber types such as bicomponent and composite fibers, patterned and 3D nanofibers, carbon nanofibers and nanotubes, and nanofibers derived from chitosan. - Provides systematic and comprehensive coverage of the manufacture, properties, and applications of nanofibers - Covers recent developments in nanofibers materials including electrospinning of bicomponent, chitosan, carbon, and conductive fibers - Brings together expertise from academia and industry to provide comprehensive, up-to-date information on nanofiber research and development - Offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science

Download or read book Laser induced Graphene written by Ruquan Ye and published by . This book was released on 2020-11-30 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: LIG is a revolutionary technique that uses a common CO2 infrared laser scriber, like the one used in any machine shop, for the direct conversion of polymers into porous graphene under ambient conditions. This technique combines the preparation and patterning of 3D graphene in a single step, without the use of wet chemicals. The ease in the structural engineering and excellent mechanical properties of the 3D graphene obtained have made LIG a versatile technique for applications across many fields. This book compiles cutting-edge research on LIG by different research groups all over the world. It discusses the strategies that have been developed to synthesize and engineer graphene, including controlling its properties such as porosity, composition, and surface characteristics. The authors are pioneers in the discovery and development of LIG and the book will appeal to anyone involved in nanotechnology, chemistry, environmental sciences, and device development, especially those with an interest in the synthesis and applications of graphene-based materials.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surface Science and Adhesion in Cosmetics written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2021-04-06 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activity in the arena of surface chemistry and adhesion aspects in cosmetics is substantial, but the information is scattered in many diverse publications media and no book exists which discusses surface chemistry and adhesion in cosmetics in unified manner. This book containing 15 chapters written by eminent researchers from academia and industry is divided into three parts: Part 1: General Topics; Part 2: Surface Chemistry Aspects; and Part 3: Wetting and Adhesion Aspects. The topics covered include: Lip biophysical properties and characterization; use of advanced silicone materials in long-lasting cosmetics; non-aqueous dispersions of acrylate copolymers in lipsticks; cosmetic oils in Lipstick structure; chemical structure of the hair surface, surface forces and interactions; AFM for hair surface characterization; application of AFM in characterizing hair, skin and cosmetic deposition; SIMS as a surface analysis method for hair, skin and cosmetics; surface tensiometry approach to characterize cosmetic products; spreading of hairsprays on hair; color transfer from long-wear face foundation products; interaction of polyelectrolytes and surfactants on hair surfaces; cosmetic adhesion to facial skin; and adhesion aspects in semi-permanent mascara; lipstick adhesion measurement.

Download or read book Plasma Electrolytic Oxidation PEO Coatings written by Marta Mohedano and published by MDPI. This book was released on 2021-06-02 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma electrolytic oxidation (PEO), also known as micro-arc oxidation (MAO), functionalizes surfaces, improving the mechanical, thermal, and corrosion performance of metallic substrates, along with other tailored properties (e.g., biocompatibility, catalysis, antibacterial response, self-lubrication, etc.). The extensive field of applications of this technique ranges from structural components, in particular, in the transport sector, to more advanced fields, such as bioengineering. The present Special Issue covers the latest advances in PEO‐coated light alloys for structural (Al, Mg) and biomedical applications (Ti, Mg), with 10 research papers and 1 review from leading research groups around the world.

Download or read book Fibrous Filter Media written by Philip Brown and published by Woodhead Publishing. This book was released on 2017-06-16 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fibrous Filter Media comprehensively covers the types, manufacture, applications, performance, and modeling of fibrous filter media. Part I introduces the principles of gas and liquid filtration, while Part II presents an overview of the types of fibrous filters, including details of fiber types, fabric construction, and applications. Part III covers a variety of filtration applications in which fibrous assemblies are used, with examples ranging from filtration for improving air quality, to medical filters, to industrial waste-water filtration. Finally, Part III covers the properties and performance of fibrous filters, including chapters on filter performance and simulation. With its expert editors and international team of contributors, this important book provides information on fibrous filters relevant to fiber and textile scientists, and is also ideal for academics and industry professionals working in the field of filtration. Dr. Philip Brown is Sweetenburg Professor of polymer and textile engineering at Clemson University, USA. Dr. Christopher Cox is Professor of mathematical sciences at Clemson University, USA. - Systematic and comprehensive coverage of the trends and new technologies being developed in the field of fibrous filter media - Focused on the needs of the textiles and filtration industries, with a clear emphasis on applied technology - Contains contributions from an international team of authors edited by an expert in the field

Download or read book Handbook of Modern Sensors written by Jacob Fraden and published by Springer Science & Business Media. This book was released on 2006-04-29 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seven years have passed since the publication of the previous edition of this book. During that time, sensor technologies have made a remarkable leap forward. The sensitivity of the sensors became higher, the dimensions became smaller, the sel- tivity became better, and the prices became lower. What have not changed are the fundamental principles of the sensor design. They are still governed by the laws of Nature. Arguably one of the greatest geniuses who ever lived, Leonardo Da Vinci, had his own peculiar way of praying. He was saying, “Oh Lord, thanks for Thou do not violate your own laws. ” It is comforting indeed that the laws of Nature do not change as time goes by; it is just our appreciation of them that is being re?ned. Thus, this new edition examines the same good old laws of Nature that are employed in the designs of various sensors. This has not changed much since the previous edition. Yet, the sections that describe the practical designs are revised substantially. Recent ideas and developments have been added, and less important and nonessential designs were dropped. Probably the most dramatic recent progress in the sensor technologies relates to wide use of MEMS and MEOMS (micro-electro-mechanical systems and micro-electro-opto-mechanical systems). These are examined in this new edition with greater detail. This book is about devices commonly called sensors. The invention of a - croprocessor has brought highly sophisticated instruments into our everyday lives.

Download or read book Lightning Protection of Aircraft written by Franklin Fisher and published by CreateSpace. This book was released on 2012-07-13 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an attempt to present under one cover the current state of knowledge concerning the potential lightning effects on aircraft and that means that are available to designers and operators to protect against these effects. The impetus for writing this book springs from two sources- the increased use of nonmetallic materials in the structure of aircraft and the constant trend toward using electronic equipment to handle flight-critical control and navigation function.