Download or read book Nuclear Reactor Thermal Hydraulics and Other Applications written by Donna Guillen and published by BoD – Books on Demand. This book was released on 2013-02-13 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes contributions from researchers around the world on numerical developments and applications to predict fluid flow and heat transfer, with an emphasis on thermal hydraulics computational fluid dynamics. Our ability to simulate larger problems with greater fidelity has vastly expanded over the past decade. The collection of material presented in this book augments the ever-increasing body of knowledge concerning the important topic of thermal hydraulics. Featured topics include coolant channel analysis, thermal hydraulic transport and mixing, as well as hydrodynamics and heat transfer processes. The contents of this book will interest researchers, scientists, engineers and graduate students.
Download or read book Heat Exchanger Design Handbook Second Edition written by Kuppan Thulukkanam and published by CRC Press. This book was released on 2013-05-20 with total page 1275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely revised and updated to reflect current advances in heat exchanger technology, Heat Exchanger Design Handbook, Second Edition includes enhanced figures and thermal effectiveness charts, tables, new chapter, and additional topics––all while keeping the qualities that made the first edition a centerpiece of information for practicing engineers, research, engineers, academicians, designers, and manufacturers involved in heat exchange between two or more fluids. See What’s New in the Second Edition: Updated information on pressure vessel codes, manufacturer’s association standards A new chapter on heat exchanger installation, operation, and maintenance practices Classification chapter now includes coverage of scrapped surface-, graphite-, coil wound-, microscale-, and printed circuit heat exchangers Thorough revision of fabrication of shell and tube heat exchangers, heat transfer augmentation methods, fouling control concepts and inclusion of recent advances in PHEs New topics like EMbaffle®, Helixchanger®, and Twistedtube® heat exchanger, feedwater heater, steam surface condenser, rotary regenerators for HVAC applications, CAB brazing and cupro-braze radiators Without proper heat exchanger design, efficiency of cooling/heating system of plants and machineries, industrial processes and energy system can be compromised, and energy wasted. This thoroughly revised handbook offers comprehensive coverage of single-phase heat exchangers—selection, thermal design, mechanical design, corrosion and fouling, FIV, material selection and their fabrication issues, fabrication of heat exchangers, operation, and maintenance of heat exchangers —all in one volume.
Download or read book Regulatory guide 1 84 written by U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research and published by . This book was released on 1986 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Jersey Register written by and published by . This book was released on 2015 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Companion Guide to the ASME Boiler Pressure Vessel Code written by K. R. Rao and published by American Society of Mechanical Engineers. This book was released on 2006 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is Volume 1 of the fully revised second edition. Organized to provide the technical professional with ready access to practical solutions, this revised, three-volume, 2,100-page second edition brings to life essential ASME Codes with authoritative commentary, examples, explanatory text, tables, graphics, references, and annotated bibliographic notes. This new edition has been fully updated to the current 2004 Code, except where specifically noted in the text. Gaining insights from the 78 contributors with professional expertise in the full range of pressure vessel and piping technologies, you find answers to your questions concerning the twelve sections of the ASME Boiler and Pressure Vessel Code, as well as the B31.1 and B31.3 Piping Codes. In addition, you find useful examinations of special topics including rules for accreditation and certification; perspective on cyclic, impact, and dynamic loads; functionality and operability criteria; fluids; pipe vibration; stress intensification factors, stress indices, and flexibility factors; code design and evaluation for cyclic loading; and bolted-flange joints and connections.
Download or read book Qualification Standard for Welding and Brazing Procedures written by American Society of Mechanical Engineers and published by . This book was released on 1974 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety in the Handling of Cryogenic Fluids written by Frederick J. Edeskuty and published by Springer Science & Business Media. This book was released on 2013-11-22 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of safety in any scientific endeavor is never in question. However, when cryogenic temperatures are involved, safety is especially important. In addition to observing the normal precautions, one must also take into account the variations of physical properties that occur at low temperatures. At these tempera tures, some properties not only exhibit large differences from their normal values but also can vary widely over a small temperature range. Before any cryogenic project is started, a thorough knowledge of the possible hazards is necessary. Only in this way can the safest operation be attained. Over the hundred-year history of cryogenic research, this has been shown to be the case. Keeping this requirement in mind is an essential ingredient in the quest for accident-free work. The past four or five decades have seen a great expansion of cryogenic technology. Cryogenic liquids, such as oxygen, nitrogen, hydrogen, and helium, have become commonly used in a number of different applications and are easily available in any part of the United States and, indeed, almost anywhere in the world. Not only are these liquids available, they have become less expensive and also available in ever larger quantities. As quantities increase, so also do the conse quences of mishaps. The future seems to hold promise of ever larger and more widespread use of the common cryogens. Thus, the importance of safety also increases as time progresses.
Download or read book Federal Register written by and published by . This book was released on 2013-06 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pressure Vessels written by Phillip Ellenberger and published by McGraw Hill Professional. This book was released on 2004-07-16 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressure vessels are found everywhere -- from basement boilers to gasoline tankers -- and their usefulness is surpassed only by the hazardous consequences if they are not properly constructed and maintained. This essential reference guides mechanical engineers and technicians through the maze of the continually updated International Boiler and Pressure Vessel Codes that govern safety, design, fabrication, and inspection. * 30% new information including coverage of the recent ASME B31.3 code
Download or read book Power Boilers written by John R. Mackay and published by American Society of Mechanical Engineers. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: First edition, 1998 by Martin D. Bernstein and Lloyd W. Yoder.
Download or read book Handbook of Engineering Practice of Materials and Corrosion written by Jung-Chul (Thomas) Eun and published by Springer Nature. This book was released on 2020-09-04 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an in-depth guide to the practical aspects of materials and corrosion engineering in the energy and chemical industries. The book covers materials, corrosion, welding, heat treatment, coating, test and inspection, and mechanical design and integrity. A central focus is placed on industrial requirements, including codes, standards, regulations, and specifications that practicing material and corrosion engineers and technicians face in all roles and in all areas of responsibility. The comprehensive resource provides expert guidance on general corrosion mechanisms and recommends materials for the control and prevention of corrosion damage, and offers readers industry-tested best practices, rationales, and case studies.
Download or read book ASME Section VIII Div 1 Pressure Vessels written by Will J. Carter and published by McGraw-Hill Professional Publishing. This book was released on 2000 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide has over 35 example problems and solutions, and over 30 ASME code interpretations referenced and explained. This book covers ASME code design, fabrication, materials, inspection and testing of pressure vessels.
Download or read book Textbook of Seismic Design written by G. R. Reddy and published by Springer. This book was released on 2019-08-03 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the seismic design of Structures, Piping Systems and Components (SSC). It explains the basic mechanisms of earthquakes, generation of design basis ground motion, and fundamentals of structural dynamics; further, it delves into geotechnical aspects related to the earthquake design, analysis of multi degree-of-freedom systems, and seismic design of RC structures and steel structures. The book discusses the design of components and piping systems located at the ground level as well as at different floor levels of the structure. It also covers anchorage design of component and piping system, and provides an introduction to retrofitting, seismic response control including seismic base isolation, and testing of SSCs. The book is written in an easy-to-understand way, with review questions, case studies and detailed examples on each topic. This educational approach makes the book useful in both classrooms and professional training courses for students, researchers, and professionals alike.
Download or read book Calibration and Test Services written by United States. National Bureau of Standards and published by . This book was released on 1970 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Training Guidelines in Non destructive Testing Techniques written by International Atomic Energy Agency and published by . This book was released on 1987 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NRC Regulatory Guides written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1973 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of currently available electronic versions of NRC regulatory guides.
Download or read book Carbon Carbon Materials and Composites written by John D. Buckley and published by William Andrew. This book was released on 2012-12-02 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major areas of carbon-carbon materials and composites are described in this comprehensive volume. It presents data and technology on the materials and structures developed for the production of carbon-carbon materials and composites. The text is composed of papers by 13 noted authors in their areas of expertise relating to the processes and production of these material systems and structures. The subject matter in the book is arranged to lead the reader through materials processing, fabrication, structural analysis, and applications of typical carbon-carbon products. The information provided includes: fiber technology, matrix material, design of composite structures, manufacturing techniques, engineering mechanics, protective coatings, and structural applications using carbon-carbon materials and composites.
