Download or read book Design and Analysis of Centrifugal Compressors written by Rene Van den Braembussche and published by John Wiley & Sons. This book was released on 2019-04-08 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of fluid dynamic models and experimental results that can help solve problems in centrifugal compressors and modern techniques for a more efficient aerodynamic design. Design and Analysis of Centrifugal Compressors isacomprehensive overview of the theoretical fluid dynamic models describing the flow in centrifugal compressors and the modern techniques for the design of more efficient centrifugal compressors. The author — a noted expert in the field, with over 40 years of experience — evaluates relevant numerical and analytical prediction models for centrifugal compressors with special attention to their accuracy and limitations. Relevant knowledge from the last century is linked with new insights obtained from modern CFD. Emphasis is to link the flow structure, performance and stability to the geometry of the different compressor components. Design and Analysis of Centrifugal Compressors is an accessible resource that combines theory with experimental data and previous research with recent developments in computational design and optimization. This important resource Covers the basic information concerning fluid dynamics that are specific for centrifugal compressors and clarifies the differences with axial compressors Provides an overview of performance prediction models previously developed in combination with extra results from research conducted by the author Describes helpful numerical and analytical models for the flow in the different components in relation to flow stability, operating range and performance Includes the fundamental information for the aerodynamic design of more efficient centrifugal compressors Explains the use of computational fluid dynamics (CFD) for the design and analysis of centrifugal compressors Written for engineers, researchers and designers in industry as well as for academics specializing in the field, Design and Analysis of Centrifugal Compressors offers an up to date overview of the information needed for the design of more effective centrifugal compressors.

Download or read book Aeronautical Engineering written by and published by . This book was released on 1971 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: A selection of annotated references to unclassified reports and journal articles that were introduced into the NASA scientific and technical information system and announced in Scientific and technical aerospace reports (STAR) and International aerospace abstracts (IAA)

Download or read book NASA Technical Memorandum written by and published by . This book was released on 1994 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Turbomachinery written by Earl Logan, Jr. and published by CRC Press. This book was released on 2003-05-01 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of its predecessor, Handbook of Turbomachinery, Second Edition presents new material on advances in fluid mechanics of turbomachinery, high-speed, rotating, and transient experiments, cooling challenges for constantly increasing gas temperatures, advanced experimental heat transfer and cooling effectiveness techniques, and propagation of wake and pressure disturbances. Completely revised and updated, it offers updated chapters on compressor design, rotor dynamics, and hydraulic turbines and features six new chapters on topics such as aerodynamic instability, flutter prediction, blade modeling in steam turbines, multidisciplinary design optimization.

Download or read book Large Space Structures Systems in the Space Station Era written by and published by . This book was released on 1992 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NASA SP written by and published by . This book was released on 1992 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Fault Diagnosis and condition monitoring written by R. Collacott and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the most sophisticated fault diagnosis and condition monitoring systems have their origin in the aerospace and nuclear energy industries, their use is by no means restricted to such areas of 'high technology'. Modern machinery in most industrial plants is now so complex and expensive that mechanics find it increas ingly difficult to detect failure by, for instance, recognising changes in sound 'signatures', and few plants can afford the luxury of regular 'stripping down'. Increasingly, therefore, eady-warning devices are being employed in an effort to prevent catastrophic breakdown. This book provides the first co-ordinated compilation of fault diagnosis and con dition monitoring devices. It proceeds in three logical steps. The eady chapters deal with those conditions which contribute to deterioration and the consequent likely development of faults. The middle part of the book considers the various tech niques of monitoring and discusses the criteria for their selection in different situ ations. The final chapters provide a guide to the interpretation of the information signals deriving from monitoring, relating to reliability science and the mathematics of probability, and thus providing decision data on which management can act.

Download or read book Continual Improvement A Bibliography with Indexes 1992 1993 written by and published by . This book was released on 1994 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book GAS Turbine Combustion Second Edition written by Arthur H. Lefebvre and published by CRC Press. This book was released on 1998-09-01 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised edition provides understanding of the basic physical, chemical, and aerodynamic processes associated with gas turbine combustion and their relevance and application to combustor performance and design. It also introduces the many new concepts for ultra-low emissions combustors, and new advances in fuel preparation and liner wall-cooling techniques for their success. It details advanced and practical approaches to combustor design for the clean burning of alternative liquid fuels derived from oil shades, tar sands, and coal. Additional topics include diffusers, combustion performance fuel injection, combustion noise, heat transfer, and emissions.

Download or read book Engine Structures written by and published by . This book was released on 1988 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Emissions from Continuous Combustion Systems written by W. Cornelius and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the Symposium on Emissions from Continuous Combustion Systems that was held at the General Motors Research Laboratories, Warren, Michigan on September 27 and 28, 1971. This symposium was the fifteenth in an annual series presented by the Research Laboratories. Each symposium has covered a different technical discipline. To be selected as the theme of a symposium, the subject must be timely and of vital interest to General Motors as well as to the technical community at large. For each symposium, the practice is to solicit papers at the forefront of research from recognized authorities in the technical discipline of interest. Approximately sixty scientists and engineers from academic, government and industrial circles in this country and abroad are then invited to join about an equal number of General Motors technical personnel to discuss freely the commissioned papers. The technical portion of the meeting is supplemented by social functions at which ample time is afforded for informal exchanges of ideas amongst the participants. By such a direct interaction of a small and select group of informed participants, it is hoped to extend the boundaries of research in the selected technical field.

Download or read book Aerothermodynamics of Turbomachinery written by Naixing Chen and published by John Wiley & Sons. This book was released on 2011-09-23 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Fluid Dynamics (CFD) is now an essential and effective tool used in the design of all types of turbomachine, and this topic constitutes the main theme of this book. With over 50 years of experience in the field of aerodynamics, Professor Naixing Chen has developed a wide range of numerical methods covering almost the entire spectrum of turbomachinery applications. Moreover, he has also made significant contributions to practical experiments and real-life designs. The book focuses on rigorous mathematical derivation of the equations governing flow and detailed descriptions of the numerical methods used to solve the equations. Numerous applications of the methods to different types of turbomachine are given and, in many cases, the numerical results are compared to experimental measurements. These comparisons illustrate the strengths and weaknesses of the methods – a useful guide for readers. Lessons for the design of improved blading are also indicated after many applications. Presents real-world perspective to the past, present and future concern in turbomachinery Covers direct and inverse solutions with theoretical and practical aspects Demonstrates huge application background in China Supplementary instructional materials are available on the companion website Aerothermodynamics of Turbomachinery: Analysis and Design is ideal for senior undergraduates and graduates studying in the fields of mechanics, energy and power, and aerospace engineering; design engineers in the business of manufacturing compressors, steam and gas turbines; and research engineers and scientists working in the areas of fluid mechanics, aerodynamics, and heat transfer. Supplementary lecture materials for instructors are available at www.wiley.com/go/chenturbo

Download or read book Gas Turbine Regenerators written by Douglas Beck and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Regenerative gas turbines are attractive alternatives to diesel engines and spark ignition engines for automobiles and to diesel engines and combined-cycle en gines for power generation. Theory indicates regenerative gas turbines should achieve higher thermal efficiencies than those of diesel engines and combined cycle engines. Further, regenerative gas turbines are potentially lower in cost, require less maintenance, require less space, and pollute less than competitive systems. Regenerators can be used for exhaust-gas heat exchange or for intercooling in gas-turbine systems. As an exhaust-gas heat exchanger, a regenerator recovers heat from the exhaust and uses it to preheat the compressed air before the compressed air enters the combustor. Preheating of the compressed air permits a small heat input to the combustor for a given power output of the engine. As an intercooler, a regenerator cools the gas between compressor stages. Less work is required to compress cool gas than is required to compress warm gas. Therefore, a regenerator intercooler can reduce the required work input to the compressor. Thus, regenerators can be used to increase the thermal efficiencies and power outputs of gas turbines. the backbones of high-performance re High-performance regenerators are generative gas turbines. In the past, lack of understanding of regenerator per formance has led to sub-optimal engine designs. Now this book gives com prehensive regenerator information. With this book, the designer can design regenerators that will yield gas turbines with maximum thermal efficiencies.

Download or read book Paper written by and published by . This book was released on 2001 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Unsteady Aerodynamics Aeroacoustics and Aeroelasticity of Turbomachines and Propellers written by H.M. Atassi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first International Symposium on Unsteady Aerodynamics and Aero elasticity of Turbomachines was held in Paris in 1976, and was followed by symposia at Lausanne in 1980, Cambridge in 1984, Aachen in 1987, Bei jing in 1989, and Notre Dame in 1991. The proceedings published following these symposia have become recognized both as basic reference texts in the subject area and as useful guides to progress in the field. It is hoped that this volume, which represents the proceedings of the Sixth International Symposium on Unsteady Aerodynamics of Turbomachines, will continue that tradition. Interest in the unsteady aerodynamics, aeroacoustics, and aeroelasticity of turbomachines has been growing rapidly since the Paris symposium. This expanded interest is reflected by a significant increase in the numbers of contributed papers and symposium participants. The timeliness of the topics has always been an essential objective of these symposia. Another important objective is to promote an international exchange between scien tists and engineers from universities, government agencies, and industry on the fascinating phenomena of unsteady turbomachine flows and how they affect the aeroelastic stability of the blading system and cause the radiation of unwanted noise. This exchange acts as a catalyst for the development of new analytical and numerical models along with carefully designed ex periments to help understand the behavior of such systems and to develop predictive tools for engineering applications.

Download or read book Large Space Structures Systems in the Space Station Era written by and published by . This book was released on 1991 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aeronautical Engineering A Cumulative Index to a Continuing Bibliography supplement 287 written by and published by . This book was released on 1993 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: