Download or read book Heat Transfer at Low Temperatures written by Walter Frost and published by Springer Science & Business Media. This book was released on 2013-11-22 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purposes of this book are to provide insight and to draw attention to problems peculiar to heat transfer at low temperatures. This does not imply that the theories of classical heat transfer fail at low temperatures, but rather that many of the approximations employed in standard solutions techniques are not valid in this regime. Physical properties, for example, have more pronounced variations at low temperatures and cannot, as is conventionally done, be held constant. Fluids readily become mixtures of two or more phases and their analysis is different from that for a single-phase fluid. These and other problems which occur more frequently at low temperatures than at standard conditions are discussed in this book. Although the title specifies heat transfer, the book also contains a very comprehensive chapter on two-phase fluid flow and a partial chapter on the flow of fluids in the thermodynamically critical state. Emphasis is placed on those flow phenomena that occur at low temperatures. Flow analyses are, of course, a prerequisite to forced-convection heat transfer analyses, and thus these chapters add continuity to the text. The book is primarily written for the design engineer, but does broach many topics which should prove interesting to the researcher. For the student and teacher the book will serve as a useful reference and possibly as a text for a special topics course in heat transfer.

Download or read book Heat Pipes written by David Reay and published by Butterworth-Heinemann. This book was released on 2013-10-01 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Pipes, Sixth Edition, takes a highly practical approach to the design and selection of heat pipes, making it an essential guide for practicing engineers and an ideal text for postgraduate students.This new edition has been revised to include new information on the underlying theory of heat pipes and heat transfer, and features fully updated applications, new data sections, and updated chapters on design and electronics cooling. The book is a useful reference for those with experience and an accessible introduction for those approaching the topic for the first time. Contains all information required to design and manufacture a heat pipe Suitable for use as a professional reference and graduate text Revised with greater coverage of key electronic cooling applications

Download or read book NASA Technical Note written by and published by . This book was released on 1970 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Survey of Heat Transfer to Near critical Fluids written by Robert C. Hendricks and published by . This book was released on 1970 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1970 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cumulative Index to Transactions of the ASME written by and published by . This book was released on 1976 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Indexes the journals which continue American Society of Mechanical Engineers. Transactions. and which are also called: Series A- of the Transactions of the American Society of Mechanical Engineers.

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1984 with total page 1198 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Thermal hydraulics of a Boiling Water Nuclear Reactor written by Richard T. Lahey and published by . This book was released on 1993 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of the classic monograph gives a comprehensive overview of the thermal-hydraulic technology underlying the design, operation, and safety assessment of boiling water reactors. In addition, new material on pressure suppression containment technology is presented.

Download or read book Standard Methods of Hydraulic Design for Power Boilers written by V. A. Lokshin and published by . This book was released on 1988 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heat Pipes written by Hussam Jouhara and published by Butterworth-Heinemann. This book was released on 2023-10-27 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Pipes: Theory, Design and Applications, Seventh Edition, takes a highly practical approach to the design and selection of heat pipes, making it an essential guide for practicing engineers and an ideal text for postgraduate students. The expanded author team consolidate and update the theoretical background included in previous editions, and include new sections on recent developments in manufacturing methods, wick design and additional applications. The book serves as an introduction to the theory, design and application of the range of passive, two-phase, heat-transfer devices known as heat pipes, serving as an essential reference for those seeking a sound understanding of the principles of heat pipe technology. It provides an introduction to the basic principles of operation and design data which would permit the reader to design and fabricate a basic heat pipe. It also provides details of the various more complex configurations and designs currently available to assist in selecting such devices.This new edition has been fully updated to reflect the latest research and technologies and includes four brand new chapters on various types of heat pipe, theoretical principles of heat transfer and fluid mechanics, additive manufacturing and heat pipe heat exchangers. Fully revised with brand new chapters on Additive Manufacturing and Heat Exchangers Guides the reader through the design and fabrication of a heat pipe Includes detail on more complex configurations and designs available to assist in the election of devices

Download or read book Properties of Water in Foods written by D. Simatos and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water is recognized as being an important factor in numerous pheno mena connected with the quality of food. For instance, it plays a part in the textural properties of several commodities. Moreover, water is an essential parameter determining the behaviour of food products in the course of many processing operations : on water, will depend the amount of energy necessary for freezing or dehydrating the product; water will strongly influence the evolution of physical, chemical and biochemical phenomena taking place in the product during processing operations such as heating, drying, etc. Water will also influence the same reactions, as well as the activity of microorganisms, during the storage of food products under various conditions. As a result, all aspects of quality - sensory, nutritional and hygienic properties of the food - will be affected. In all these circumstances, the water content of a product is obviously an important factor, but equally important may be the physical properties of this water, such as its thermodynamic activity and its mobility. Actual ly, the concept of water activity (a ) is now widely used by the food industry and in the legislation of sever')¥l countries. The idea of a small, international meeting devoted to a synthetic review and discussion of knowledge on these various matters, was first developed by Dr. R. B.

Download or read book NASA Scientific and Technical Reports and Publications for 1969 A Selected Listing written by United States. National Aeronautics and Space Administration. Scientific and Technical Information Division and published by . This book was released on 1970 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heat Pipes written by P. D. Dunn and published by Elsevier. This book was released on 2012-12-02 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive, up-to-date coverage of the theory, design and manufacture of heat pipes and their applications. This latest edition has been thoroughly revised, up-dated and expanded to give an in-depth coverage of the new developments in the field. Significant new material has been added to all the chapters and the applications section has been totally rewritten to ensure that topical and important applications are appropriately emphasised. The bibliography has been considerably enlarged to incorporate much valuable new information. Thus readers of the previous edition, which has established itself as the standard text on the subject, will find much additional data of interest whilst new readers will find the vast amount of useful data included in the appendices an indispensable source of reference.

Download or read book Gas Turbine Regenerators written by Douglas Beck and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Regenerative gas turbines are attractive alternatives to diesel engines and spark ignition engines for automobiles and to diesel engines and combined-cycle en gines for power generation. Theory indicates regenerative gas turbines should achieve higher thermal efficiencies than those of diesel engines and combined cycle engines. Further, regenerative gas turbines are potentially lower in cost, require less maintenance, require less space, and pollute less than competitive systems. Regenerators can be used for exhaust-gas heat exchange or for intercooling in gas-turbine systems. As an exhaust-gas heat exchanger, a regenerator recovers heat from the exhaust and uses it to preheat the compressed air before the compressed air enters the combustor. Preheating of the compressed air permits a small heat input to the combustor for a given power output of the engine. As an intercooler, a regenerator cools the gas between compressor stages. Less work is required to compress cool gas than is required to compress warm gas. Therefore, a regenerator intercooler can reduce the required work input to the compressor. Thus, regenerators can be used to increase the thermal efficiencies and power outputs of gas turbines. the backbones of high-performance re High-performance regenerators are generative gas turbines. In the past, lack of understanding of regenerator per formance has led to sub-optimal engine designs. Now this book gives com prehensive regenerator information. With this book, the designer can design regenerators that will yield gas turbines with maximum thermal efficiencies.

Download or read book Paper written by and published by . This book was released on 1991 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Cryogenic Engineering written by K. D. Timmerhaus and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1969 marked the return of the Cryogenic Engineering Conference, now affiliated with the National Academy ofSciences through the Division ofEngineering, National Research Council, to the University of California at Los Angeles. As in 1962, the Cryogenic Engineering Conference gratefully acknowledges the assistance of UCLA, its Engineering and Physical Seien ces Extension Division, and in particular J. Dillon, S. Houston, H. L. Tallman, and their stafffor serving as hosts to the 1969 Cryogenic Engineering Conference. The National Academy of Sciences is a private honorary organization of more than 700 scientists and engineers elected on the basis of outstanding contributions to knowledge. Established by a Congressional Act of Incorporation, the Academy works to further science and its use for the general welfare by bringing together the most qualified individuals to deal with scientific and technological problems of broad significance. The National Research Council was organized as an agency of the National Academy of Sciences in 1916, to enable the broad community of U.S. scientists and engineers to associate their efforts with the Iimited membership of the Academy in service to science and the nation. The Division of Engineering is one of the eight major Divisions into which the National Research Council is organized for the conduct of its work. Its membership includes representatives of the nation's leading technical societies as weH as a number of members-at-Iarge. The Cryogenic Engineering Conference is an organization of the Division of Engineering.

Download or read book Heat Exchanger Design Handbook Second Edition written by Kuppan Thulukkanam and published by CRC Press. This book was released on 2013-05-20 with total page 1275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely revised and updated to reflect current advances in heat exchanger technology, Heat Exchanger Design Handbook, Second Edition includes enhanced figures and thermal effectiveness charts, tables, new chapter, and additional topics––all while keeping the qualities that made the first edition a centerpiece of information for practicing engineers, research, engineers, academicians, designers, and manufacturers involved in heat exchange between two or more fluids. See What’s New in the Second Edition: Updated information on pressure vessel codes, manufacturer’s association standards A new chapter on heat exchanger installation, operation, and maintenance practices Classification chapter now includes coverage of scrapped surface-, graphite-, coil wound-, microscale-, and printed circuit heat exchangers Thorough revision of fabrication of shell and tube heat exchangers, heat transfer augmentation methods, fouling control concepts and inclusion of recent advances in PHEs New topics like EMbaffle®, Helixchanger®, and Twistedtube® heat exchanger, feedwater heater, steam surface condenser, rotary regenerators for HVAC applications, CAB brazing and cupro-braze radiators Without proper heat exchanger design, efficiency of cooling/heating system of plants and machineries, industrial processes and energy system can be compromised, and energy wasted. This thoroughly revised handbook offers comprehensive coverage of single-phase heat exchangers—selection, thermal design, mechanical design, corrosion and fouling, FIV, material selection and their fabrication issues, fabrication of heat exchangers, operation, and maintenance of heat exchangers —all in one volume.