Download or read book Characterization of Minerals Metals and Materials 2015 written by John Carpenter and published by Springer. This book was released on 2016-12-20 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection focuses on the characterization of minerals, metals, and materials as well as the application of characterization results on the processing of these materials. Papers cover topics such as clays, ceramics, composites, ferrous metals, non-ferrous metals, minerals, electronic materials, magnetic materials, environmental materials, advanced materials, and soft materials. In addition, papers covering materials extraction, materials processing, corrosion, welding, solidification, and method development are included. This book provides a current snapshot of characterization in materials science and its role in validating, informing, and driving current theories in the field of materials science. This volume will serve the dual purpose of furnishing a broad introduction of the field to novices while simultaneously serving to keep subject matter experts up-to-date.
Download or read book Proceedings of the Canadian Society for Civil Engineering Annual Conference 2023 Volume 11 written by Serge Desjardins and published by Springer Nature. This book was released on with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgy and Corrosion Control in Oil and Gas Production written by Robert Heidersbach and published by John Wiley & Sons. This book was released on 2018-09-17 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details the proper methods to assess, prevent, and reduce corrosion in the oil industry using today's most advanced technologies This book discusses upstream operations, with an emphasis on production, and pipelines, which are closely tied to upstream operations. It also examines protective coatings, alloy selection, chemical treatments, and cathodic protection—the main means of corrosion control. The strength and hardness levels of metals is also discussed, as this affects the resistance of metals to hydrogen embrittlement, a major concern for high-strength steels and some other alloys. It is intended for use by personnel with limited backgrounds in chemistry, metallurgy, and corrosion and will give them a general understanding of how and why corrosion occurs and the practical approaches to how the effects of corrosion can be mitigated. Metallurgy and Corrosion Control in Oil and Gas Production, Second Edition updates the original chapters while including a new case studies chapter. Beginning with an introduction to oilfield metallurgy and corrosion control, the book provides in-depth coverage of the field with chapters on: chemistry of corrosion; corrosive environments; materials; forms of corrosion; corrosion control; inspection, monitoring, and testing; and oilfield equipment. Covers all aspects of upstream oil and gas production from downhole drilling to pipelines and tanker terminal operations Offers an introduction to corrosion for entry-level corrosion control specialists Contains detailed photographs to illustrate descriptions in the text Metallurgy and Corrosion Control in Oil and Gas Production, Second Edition is an excellent book for engineers and related professionals in the oil and gas production industries. It will also be an asset to the entry-level corrosion control professional who may have a theoretical background in metallurgy, chemistry, or a related field, but who needs to understand the practical limitations of large-scale industrial operations associated with oil and gas production.
Download or read book Proceedings of the 6th International Conference on Industrial Engineering ICIE 2020 written by Andrey A. Radionov and published by Springer Nature. This book was released on 2021-03-31 with total page 1296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 6th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in May 2020. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.
Download or read book COMAT 2014 Recent Trends in Structural Materials written by Jan Džugan and published by Trans Tech Publications Ltd. This book was released on 2015-10-26 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 3rd International Conference COMAT on Recent Trends in Structural Materials, November 19-21, 2014, Pilsen, Czech Republic
Download or read book Creep and High Temperature Deformation of Metals and Alloys written by Stefano Spigarelli and published by MDPI. This book was released on 2019-12-12 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: By the late 1940s, and since then, the continuous development of dislocation theories have provided the basis for correlating the macroscopic time-dependent deformation of metals and alloys—known as creep—to the time-dependent processes taking place within the metals and alloys. High-temperature deformation and stress relaxation effects have also been explained and modeled on similar bases. The knowledge of high-temperature deformation as well as its modeling in conventional or unconventional situations is becoming clearer year by year, with new contemporary and better performing high-temperature materials being constantly produced and investigated. This book includes recent contributions covering relevant topics and materials in the field in an innovative way. In the first section, contributions are related to the general description of creep deformation, damage, and ductility, while in the second section, innovative testing techniques of creep deformation are presented. The third section deals with creep in the presence of complex loading/temperature changes and environmental effects, while the last section focuses on material microstructure–creep correlations for specific material classes. The quality and potential of specific materials and microstructures, testing conditions, and modeling as addressed by specific contributions will surely inspire scientists and technicians in their own innovative approaches and studies on creep and high-temperature deformation.
Download or read book Joint EPRI 123HiMAT International Conference on Advances in High Temperature Materials written by J. Shingledecker and published by ASM International. This book was released on 2019-10-01 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings from: EPRI’s 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials
Download or read book Advanced Manufacturing Techniques for Engineering and Engineered Materials written by Thanigaivelan, R. and published by IGI Global. This book was released on 2022-03-11 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: As technology advances, it is imperative to stay current in the newest developments made within the engineering industry and within material sciences. Trends in manufacturing such as 3D printing, casting, welding, surface modification, computer numerical control (CNC), non-traditional, Industry 4.0 ergonomics, and hybrid machining methods must be closely examined to utilize these important resources for the betterment of society. Advanced Manufacturing Techniques for Engineering and Engineered Materials provides a unified and complete overview about the recent and emerging trends, developments, and associated technology with scope for the commercialization of techniques specific to manufacturing materials. This book also reviews the various machining methods for difficult-to-cut materials and novel materials including matrix composites. Covering topics such as agro-waste, conventional machining, and material performance, this book is an essential resource for researchers, engineers, technologists, students and professors of higher education, industry workers, entrepreneurs, researchers, and academicians.
Download or read book Constitutive Models for Rubber XI written by Bertrand Huneau and published by CRC Press. This book was released on 2019-06-14 with total page 1387 pages. Available in PDF, EPUB and Kindle. Book excerpt: Constitutive Models for Rubber XI is a comprehensive compilation of both the oral and poster contributions to the European Conference on Constitutive Models for Rubber. This 11th edition, held in Nantes (France) 25-27th June 2019, is the occasion to celebrate the 20th anniversary of the ECCMR series. Around 100 contributions reflect the state-of-the-art in the mechanics of elastomers. They cover the fields of: Material testing Constitutive modelling and finite element implementation Micromechanical aspects, and Durability (failure, fatigue and ageing) Constitutive Models for Rubber XI is of interest for developers and researchers involved in the rubber processing and CAE software industries, as well as for academics in nearly all disciplines of elastomer mechanics and technology.
Download or read book New Piezoelectric Materials and Devices Fabrication Structures and Applications written by Chunlong Fei and published by Frontiers Media SA. This book was released on 2022-02-15 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Performance Bolting Technology for Offshore Oil and Natural Gas Operations written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2018-07-12 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Commercially significant amounts of crude oil and natural gas lie under the continental shelf of the United States. Advances in locating deposits, and improvements in drilling and recovery technology, have made it technically and economically feasible to extract these resources under harsh conditions. But extracting these offshore petroleum resources involves the possibility, however remote, of oil spills, with resulting damage to the ocean and the coastline ecosystems and risks to life and limb of those performing the extraction. The environmental consequences of an oil spill can be more severe underwater than on land because sea currents can quickly disperse the oil over a large area and, thus, cleanup can be problematic. Bolted connections are an integral feature of deep-water well operations. High-Performance Bolting Technology for Offshore Oil and Natural Gas Operations summarizes strategies for improving the reliability of fasteners used in offshore oil exploration equipment, as well as best practices from other industrial sectors. It focuses on critical boltingâ€"bolts, studs, nuts, and fasteners used on critical connections.
Download or read book Innovative Food Processing Technologies written by and published by Elsevier. This book was released on 2020-08-18 with total page 2482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food process engineering, a branch of both food science and chemical engineering, has evolved over the years since its inception and still is a rapidly changing discipline. While traditionally the main objective of food process engineering was preservation and stabilization, the focus today has shifted to enhance health aspects, flavour and taste, nutrition, sustainable production, food security and also to ensure more diversity for the increasing demand of consumers. The food industry is becoming increasingly competitive and dynamic, and strives to develop high quality, freshly prepared food products. To achieve this objective, food manufacturers are today presented with a growing array of new technologies that have the potential to improve, or replace, conventional processing technologies, to deliver higher quality and better consumer targeted food products, which meet many, if not all, of the demands of the modern consumer. These new, or innovative, technologies are in various stages of development, including some still at the R&D stage, and others that have been commercialised as alternatives to conventional processing technologies. Food process engineering comprises a series of unit operations traditionally applied in the food industry. One major component of these operations relates to the application of heat, directly or indirectly, to provide foods free from pathogenic microorganisms, but also to enhance or intensify other processes, such as extraction, separation or modification of components. The last three decades have also witnessed the advent and adaptation of several operations, processes, and techniques aimed at producing high quality foods, with minimum alteration of sensory and nutritive properties. Some of these innovative technologies have significantly reduced the thermal component in food processing, offering alternative nonthermal methods. Food Processing Technologies: A Comprehensive Review, Three Volume Set covers the latest advances in innovative and nonthermal processing, such as high pressure, pulsed electric fields, radiofrequency, high intensity pulsed light, ultrasound, irradiation and new hurdle technology. Each section will have an introductory article covering the basic principles and applications of each technology, and in-depth articles covering the currently available equipment (and/or the current state of development), food quality and safety, application to various sectors, food laws and regulations, consumer acceptance, advancements and future scope. It will also contain case studies and examples to illustrate state-of-the-art applications. Each section will serve as an excellent reference to food industry professionals involved in the processing of a wide range of food categories, e.g., meat, seafood, beverage, dairy, eggs, fruits and vegetable products, spices, herbs among others.
Download or read book Structure Vibration Vibration Mitigation Materials and Structures written by Zhao-Dong Xu and published by Frontiers Media SA. This book was released on 2019-12-04 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration is a common phenomenon when a structure is exposed to one or multiple mechanical or environmental actions, always at great cost to lives and to the economy. In order to reduce the adverse impact of vibration, vibration mitigation materials and structures have recently been at the center of attention. This book “Structure Vibration: Vibration Mitigation Materials and Structures” as the tip of the iceberg, provides a window to let people know about the flourishing of this young field. Twelve original research papers and one review paper have been included in this book to represent the recent development of vibration mitigation technology. The vibration mitigation material manufacture process, testing, analysis, and application have completely thoroughly studied. We wish more cutting-edge achievements will arise to benefit mankind and continually promote the development of vibration mitigation materials and structures.
Download or read book Proceedings of the 2014 Energy Materials Conference written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2015-04-06 with total page 1073 pages. Available in PDF, EPUB and Kindle. Book excerpt: This DVD contains a collection of papers presented at EnergyMaterials 2014, a conference organized jointly by The ChineseSociety for Metals (CSM) and The Minerals, Metals & MaterialsSociety (TMS), and held November 4-6, 2014, in Xi’an, ShaanxiProvince, China. With the rapid growth of the world’s energyproduction and consumption, the important role of energy materialshas achieved worldwide acknowledgement. Material producers andconsumers constantly seek the possibility of increasing strength,improving fabrication and service performance, simplifyingprocesses, and reducing costs. Energy Materials 2014 has provided aforum for academics, researchers, and engineers around the world toexchange state-of-the-art development and information on issuesrelated to energy materials. The papers on the DVD are organized around the followingtopics: Materials for Coal-Based Systems Materials for Gas Turbine Systems Materials for Nuclear Systems Materials for Oil and Gas Materials for Pressure Vessels
Download or read book Bioprocessing Piping and Equipment Design written by William M. (Bill) Huitt and published by John Wiley & Sons. This book was released on 2016-10-24 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only comprehensive and authoritative reference guide to the ASME Bioprocessing Piping and Equipment (BPE) standard This is a companion guide to the ASME Bioprocessing Piping and Equipment (BPE) Standard and explains what lies behind many of the requirements and recommendations within that industry standard. Following an introductory narrative to the Standard's early history, industry related codes and standards are explained; the design and engineering aspects cover construction materials, both metallic and nonmetallic; then components, fabrication, assembly and installation of piping systems are explored. Examination, Inspection and Testing then precede the ASME BPE certification process, concluding with a discussion on system design. The author draws on many years' experience and insights from first-hand involvement in the field of industrial piping design, engineering, construction, and management, which includes the bioprocessing industry. The reader will learn why dimensions and tolerances, process instrumentation, and material selection play such an integral part in the manufacture of components and instrumentation. This easy to understand and navigate guide will assist engineers (design, piping, chemical, etc.) who need to understand the basis for much of the Standard’s content, as do the contractors and inspectors who have to meet and validate compliance with the BPE Standard.
Download or read book Storage Tanks Selection Design Testing Inspection and Maintenance Emission Management and Environmental Protection written by Karan Sotoodeh and published by Elsevier. This book was released on 2024-01-09 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emission prevention and environmental protection are hot topics in the oil and gas industry and many countries, especially in the United States. Among sources of pollution in the oil and gas industry, storage tanks used to store products such as oil or liquefied natural gas (LNG) are considered the second most significant source of emissions after industrial valves. Storage Tanks Selection, Design, Testing, Inspection, and Maintenance: Emission Management and Environmental Protection provides the latest research and technological advancements in storage tank design including materials selection, welding, and techniques used order to reduce or prevent emissions. This book will detail essential information regarding inspections, testing, and maintenance that are performed to prevent the failure of storage tanks and will also explore the different types of storage tank emissions and provide recommendations for the preventive, as well as safety systems that are critical to minimize the failure of storage tanks. Researchers, engineers, industry professionals, and students in the environmental safety field will find this book to be a welcomed resource to learning about and working on storage tank emissions in the oil and gas industries. - Provides detailed understanding of the problems and hazards of emission in the oil and gas industries - Presents mechanical designs of storage tanks by considering various loads (e.g., axial, bending, wind, earthquake, etc.) to prevent failure - Details studies of corrosion assessment of storage tanks - Introduces safety systems in the oil and gas industries and the effect of tank selection on emission
Download or read book PRINT PROCEEDINGS OF THE ASME 2018 PRESSURE VESSELS AND PIPING CONFERENCE PVP2018 written by AMERICAN SOCIETY OF MECHANICAL ENGINEERS. and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: