Download or read book Arrays Functional Languages and Parallel Systems written by Lenore M. Restifo Mullin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: During a meeting in Toronto last winter, Mike Jenkins, Bob Bernecky and I were discussing how the two existing theories on arrays influenced or were in fluenced by programming languages and systems. More's Army Theory was the basis for NIAL and APL2 and Mullin's A Mathematics of A rmys(MOA) , is being used as an algebra of arrays in functional and A-calculus based pro gramming languages. MOA was influenced by Iverson's initial and extended algebra, the foundations for APL and J respectively. We discussed that there is a lot of interest in the Computer Science and Engineering communities concerning formal methods for languages that could support massively parallel operations in scientific computing, a back to-roots interest for both Mike and myself. Languages for this domain can no longer be informally developed since it is necessary to map languages easily to many multiprocessor architectures. Software systems intended for parallel computation require a formal basis so that modifications can be done with relative ease while ensuring integrity in design. List based lan guages are profiting from theoretical foundations such as the Bird-Meertens formalism. Their theory has been successfully used to describe list based parallel algorithms across many classes of architectures.
Download or read book Functional Programming Glasgow 1993 written by John T. O'Donnell and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Functional Programming Group at the University of Glasgow was started in 1986 by John Hughes and Mary Sheeran. Since then it has grown in size and strength, becoming one of the largest computing science research groups at Glasgow and earning an international reputation. The first Glasgow Functional Programming Workshop was organised in the summer of 1988. Its purpose was threefold: to provide a snapshot of all the research going on within the group, to share research ideas between Glaswegians and colleagues in the U.K. and abroad, and to introduce research students to the art of writing and presenting papers at a semi-formal (but still local and friendly) conference. The success of the first workshop has led to an annual series: Rothesay (1988), Fraserburgh (1989), Ullapool (1990). Portree (1991), Ayr (1992), and the workshop reported in these proceedings: Ayr (1993). Most participants wrote a paper that appeared in the draft proceedings (distributed at the workshop), and each draft paper was presented by one of the authors. The papers were all refereed by several other participants at the workshop, both internal and external, and the programme committee selected papers for these proceedings. Most papers have been revised twice, based firstly on feedback at the workshop, and secondly using the referee reports.
Download or read book Central European Functional Programming School written by Zoltán Horváth and published by Springer Science & Business Media. This book was released on 2006-10-02 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents eight carefully revised texts of selected lectures given by leading researchers of the field at the first Central European Functional Programming School, CEFP 2005, held in Budapest, Hungary, in July 2005. The eight revised full papers presented were carefully selected during two rounds of reviewing and improvement for inclusion in the book. The lectures cover a wide range of topics such as new programming language concepts for subtyping.
Download or read book Encyclopedia of Microcomputers written by Allen Kent and published by CRC Press. This book was released on 1994-05-12 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The Encyclopedia of Microcomputers serves as the ideal companion reference to the popular Encyclopedia of Computer Science and Technology. Now in its 10th year of publication, this timely reference work details the broad spectrum of microcomputer technology, including microcomputer history; explains and illustrates the use of microcomputers throughout academe, business, government, and society in general; and assesses the future impact of this rapidly changing technology."
Download or read book Languages and Compilers for Parallel Computing written by Chua-Huang Huang and published by Springer Science & Business Media. This book was released on 1996-01-24 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the refereed proceedings of the Eighth Annual Workshop on Languages and Compilers for Parallel Computing, held in Columbus, Ohio in August 1995. The 38 full revised papers presented were carefully selected for inclusion in the proceedings and reflect the state of the art of research and advanced applications in parallel languages, restructuring compilers, and runtime systems. The papers are organized in sections on fine-grain parallelism, interprocedural analysis, program analysis, Fortran 90 and HPF, loop parallelization for HPF compilers, tools and libraries, loop-level optimization, automatic data distribution, compiler models, irregular computation, object-oriented and functional parallelism.
Download or read book Euro Par 2006 Parallel Processing written by Wolfgang E. Nagel and published by Springer. This book was released on 2006-11-24 with total page 1228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 12th International Conference on Parallel Computing, Euro-Par 2006. The book presents 110 carefully reviewed, revised papers. Topics include support tools and environments; performance prediction and evaluation; scheduling and load balancing; compilers for high performance; parallel and distributed databases, data mining and knowledge discovery; grid and cluster computing: models, middleware and architectures; parallel computer architecure and instruction-level parallelism; distributed systems and algorithms, and more.
Download or read book Programming Paradigms in Graphics written by Remco C. Veltkamp and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume are a good sampling and overview of current solutions to the problems of creating graphically based systems. This breadth of scope comes out of the closing discussion at the Fourth Eurographics Workshop on Object-Oriented Graphics. The fifth workshop, on Programming Paradigms in Graphics, set out to provide answers and alternatives to the shortcomings of object-oriented graphics. The presentations investigated the applicability, merits and problems of various programming paradigms in computer graphics for design, modelling and implementation. This book contains a revised selection of the best papers from the Fifth Eurograph ics Workshop on Programming Paradigms in Graphics, held 2-3 September 1995 in Maastricht, The ~etherlands. All papers at the workshop were subjected to a thorough review by at least three members of the international programme committee. The se lection for this book was based on further review and the papers also incorporate the relevant aspects of the discussions at the workshop. In past Eurographics workshops on Object-Oriented Graphics the prominent trend has been a discovery of the limits of object-orientation in graphics. The limitations of object-orientation were felt to lie in such areas as the expression of relationships between objects. This is an area of particular strength for the declarative languages, such as constraint-based languages. On the other hand, a notion of state has long been a problem in declarative languages and yet it is often seen as an essential aspect of graphical modelling, particularly in simulation and animation.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Organization of Reduction Data Flow and Control Flow Systems written by Werner Kluge and published by MIT Press. This book was released on 1992 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: In light of research over the last decade on new ways of representing and performing computations, this book provides a timely reexamination of computer organization and computer architecture. It systematically investigates the basic organizational concepts of reduction, data flow, and control flow (or state transition) and their relationship to the underlying programming paradigms. For each of these concepts, Kluge looks at how princip1es of language organization translate into architectures and how architectural features translate into concrete system implementations, comparing them in order to identify their similarities and differences. The focus is primarily on a functional programming paradigm based on a full-fledged operational &-calculus and on its realization by various reduction systems. Kluge first presents a brief outline of the overall configuration of a computing system and of an operating system kernel, introduce elements of the theory of Petrinets as modeling tools for nonsequential systems and processes, and use a simple form of higher-order Petri nets to identify by means of examples the operational and control disciplines that govern the organization of reduction, data flow, and control flow computations. He then introduces the notions of abstract algorithms and of reductions and includes an overview of the theory of the &-calculus. The next five chapters describe the various computing engines that realize the reduction semantics of a full-fledged &-calculus. The remaining chapters provide self-contained investigations of the G-machine, SKI combinator reduction, and the data flow approach for implementing the functional programming paradigm. This is followed by a detailed description of a typical control flow (or von Neumann) machine architecture (a VAX11 system). Properties of these machines are summarized in the concluding chapter, which classifies them according to the semantic models they support.
Download or read book Hot Hadronic Matter written by Jean Letessier and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past decade has seen the development of the operational understanding of fun damental interactions within the standard model. This has detoured our attention from the great enigmas posed by the dynamics and collective behavior of strongly interacting particles. Discovered more than 30 years ago, the thermal nature of the hadronic particle spectra has stimulated considerable theoretical effort, which so far has failed to 'confirm' on the basis of microscopic interactions the origins of this phenomenon. However, a highly successful Statistical Bootstrap Model was developed by Rolf Hagedorn at CERN about 30 years ago, which has led us to consider the 'boiling hadronic matter' as a transient state in the trans formation of hadronic particles into their melted form which we call Quark-GIuon-Plasma (QGP). Today, we return to seek detailed understanding of the thermalization processes of hadronic matter, equipped on the theoretical side with the knowledge of the fundamental strong interaction theory, the quantum chromo-dynamics (QCD), and recognizing the im portant role of the complex QCD-vacuum structure. On the other side, we have developed new experimental tools in the form of nuclear relativistic beams, which allow to create rather extended regions in space-time of Hot Hadronic Matter. The confluence of these new and recent developments in theory and experiment led us to gather together from June 27 to July 1, 1994, at the Grand Hotel in Divonne-Ies-Bains, France, to discuss and expose the open questions and issues in our field.
Download or read book Algorithm Structured Computer Arrays and Networks written by Leonard Uhr and published by Academic Press. This book was released on 2014-05-10 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Science and Applied Mathematics: Algorithm-Structured Computer Arrays and Networks: Architectures and Processes for Images, Percepts, Models, Information examines the parallel-array, pipeline, and other network multi-computers. This book describes and explores arrays and networks, those built, being designed, or proposed. The problems of developing higher-level languages for systems and designing algorithm, program, data flow, and computer structure are also discussed. This text likewise describes several sequences of successively more general attempts to combine the power of arrays with the flexibility of networks into structures that reflect and embody the flow of information through their processors. This publication is useful as a textbook or auxiliary textbook for students taking courses on computer architecture, parallel computers, arrays and networks, and image processing and pattern recognition.
Download or read book Research Directions in Parallel Functional Programming written by Kevin Hammond and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Programming is hard. Building a large program is like constructing a steam locomotive through a hole the size of a postage stamp. An artefact that is the fruit of hundreds of person-years is only ever seen by anyone through a lOO-line window. In some ways it is astonishing that such large systems work at all. But parallel programming is much, much harder. There are so many more things to go wrong. Debugging is a nightmare. A bug that shows up on one run may never happen when you are looking for it - but unfailingly returns as soon as your attention moves elsewhere. A large fraction of the program's code can be made up of marshalling and coordination algorithms. The core application can easily be obscured by a maze of plumbing. Functional programming is a radical, elegant, high-level attack on the programming problem. Radical, because it dramatically eschews side-effects; elegant, because of its close connection with mathematics; high-level, be cause you can say a lot in one line. But functional programming is definitely not (yet) mainstream. That's the trouble with radical approaches: it's hard for them to break through and become mainstream. But that doesn't make functional programming any less fun, and it has turned out to be a won derful laboratory for rich type systems, automatic garbage collection, object models, and other stuff that has made the jump into the mainstream.
Download or read book Proceedings of the 1990 ACM Conference on LISP and Functional Programming written by Association for Computing Machinery and published by Pearson Education. This book was released on 1990 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Parallel Computing written by David Padua and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 2211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing over 300 entries in an A-Z format, the Encyclopedia of Parallel Computing provides easy, intuitive access to relevant information for professionals and researchers seeking access to any aspect within the broad field of parallel computing. Topics for this comprehensive reference were selected, written, and peer-reviewed by an international pool of distinguished researchers in the field. The Encyclopedia is broad in scope, covering machine organization, programming languages, algorithms, and applications. Within each area, concepts, designs, and specific implementations are presented. The highly-structured essays in this work comprise synonyms, a definition and discussion of the topic, bibliographies, and links to related literature. Extensive cross-references to other entries within the Encyclopedia support efficient, user-friendly searchers for immediate access to useful information. Key concepts presented in the Encyclopedia of Parallel Computing include; laws and metrics; specific numerical and non-numerical algorithms; asynchronous algorithms; libraries of subroutines; benchmark suites; applications; sequential consistency and cache coherency; machine classes such as clusters, shared-memory multiprocessors, special-purpose machines and dataflow machines; specific machines such as Cray supercomputers, IBM’s cell processor and Intel’s multicore machines; race detection and auto parallelization; parallel programming languages, synchronization primitives, collective operations, message passing libraries, checkpointing, and operating systems. Topics covered: Speedup, Efficiency, Isoefficiency, Redundancy, Amdahls law, Computer Architecture Concepts, Parallel Machine Designs, Benmarks, Parallel Programming concepts & design, Algorithms, Parallel applications. This authoritative reference will be published in two formats: print and online. The online edition features hyperlinks to cross-references and to additional significant research. Related Subjects: supercomputing, high-performance computing, distributed computing
Download or read book Implementation of Functional Languages written by Kevin Hammond and published by Springer. This book was released on 2003-07-31 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-workshop proceedings of the 10th International Workshop on the Implementation of Functional Languages, IFL'98, held in London, UK, in September 1998. The 15 revised full papers presented were carefully selected during two rounds of reviewing. The volume covers a wide range of topics including parallel process organization, parallel profiling, compilation and semantics of parallel systems, programming methodology, interrupt handling, strictness analysis, concurrency and message passing, and inter-language working.
Download or read book Programming Massively Parallel Processors written by David B. Kirk and published by Newnes. This book was released on 2012-12-31 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: Programming Massively Parallel Processors: A Hands-on Approach, Second Edition, teaches students how to program massively parallel processors. It offers a detailed discussion of various techniques for constructing parallel programs. Case studies are used to demonstrate the development process, which begins with computational thinking and ends with effective and efficient parallel programs. This guide shows both student and professional alike the basic concepts of parallel programming and GPU architecture. Topics of performance, floating-point format, parallel patterns, and dynamic parallelism are covered in depth. This revised edition contains more parallel programming examples, commonly-used libraries such as Thrust, and explanations of the latest tools. It also provides new coverage of CUDA 5.0, improved performance, enhanced development tools, increased hardware support, and more; increased coverage of related technology, OpenCL and new material on algorithm patterns, GPU clusters, host programming, and data parallelism; and two new case studies (on MRI reconstruction and molecular visualization) that explore the latest applications of CUDA and GPUs for scientific research and high-performance computing. This book should be a valuable resource for advanced students, software engineers, programmers, and hardware engineers. - New coverage of CUDA 5.0, improved performance, enhanced development tools, increased hardware support, and more - Increased coverage of related technology, OpenCL and new material on algorithm patterns, GPU clusters, host programming, and data parallelism - Two new case studies (on MRI reconstruction and molecular visualization) explore the latest applications of CUDA and GPUs for scientific research and high-performance computing
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
