Download or read book Architecture and CAD for Deep Submicron FPGAS written by Vaughn Betz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their introduction in 1984, Field-Programmable Gate Arrays (FPGAs) have become one of the most popular implementation media for digital circuits and have grown into a $2 billion per year industry. As process geometries have shrunk into the deep-submicron region, the logic capacity of FPGAs has greatly increased, making FPGAs a viable implementation alternative for larger and larger designs. To make the best use of these new deep-submicron processes, one must re-design one's FPGAs and Computer- Aided Design (CAD) tools. Architecture and CAD for Deep-Submicron FPGAs addresses several key issues in the design of high-performance FPGA architectures and CAD tools, with particular emphasis on issues that are important for FPGAs implemented in deep-submicron processes. Three factors combine to determine the performance of an FPGA: the quality of the CAD tools used to map circuits into the FPGA, the quality of the FPGA architecture, and the electrical (i.e. transistor-level) design of the FPGA. Architecture and CAD for Deep-Submicron FPGAs examines all three of these issues in concert. In order to investigate the quality of different FPGA architectures, one needs CAD tools capable of automatically implementing circuits in each FPGA architecture of interest. Once a circuit has been implemented in an FPGA architecture, one next needs accurate area and delay models to evaluate the quality (speed achieved, area required) of the circuit implementation in the FPGA architecture under test. This book therefore has three major foci: the development of a high-quality and highly flexible CAD infrastructure, the creation of accurate area and delay models for FPGAs, and the study of several important FPGA architectural issues. Architecture and CAD for Deep-Submicron FPGAs is an essential reference for researchers, professionals and students interested in FPGAs.

Download or read book Low Energy FPGAs Architecture and Design written by Varghese George and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-Energy FPGAs: Architecture and Design is a primary resource for both researchers and practicing engineers in the field of digital circuit design. The book addresses the energy consumption of Field-Programmable Gate Arrays (FPGAs). FPGAs are becoming popular as embedded components in computing platforms. The programmability of the FPGA can be used to customize implementations of functions on an application basis. This leads to performance gains, and enables reuse of expensive silicon. Chapter 1 provides an overview of digital circuit design and FPGAs. Chapter 2 looks at the implication of deep-submicron technology onFPGA power dissipation. Chapter 3 describes the exploration environment to guide and evaluate design decisions. Chapter 4 discusses the architectural optimization process to evaluate the trade-offs between the flexibility of the architecture, and the effect on the performance metrics. Chapter 5 reviews different circuit techniques to reduce the performance overhead of some of the dominant components. Chapter 6 shows methods to configure FPGAs to minimize the programming overhead. Chapter 7 addresses the physical realization of some of the critical components and the final implementation of a specific low-energy FPGA. Chapter 8 compares the prototype array to an equivalent commercial architecture.

Download or read book Integrated Circuit and System Design Power and Timing Modeling Optimization and Simulation written by Vassilis Paliouras and published by Springer. This book was released on 2005-08-25 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welcome to the proceedings of PATMOS 2005, the 15th in a series of international workshops.PATMOS2005wasorganizedbyIMECwithtechnicalco-sponsorshipfrom the IEEE Circuits and Systems Society. Over the years, PATMOS has evolved into an important European event, where - searchers from both industry and academia discuss and investigate the emerging ch- lenges in future and contemporary applications, design methodologies, and tools - quired for the developmentof upcominggenerationsof integrated circuits and systems. The technical program of PATMOS 2005 contained state-of-the-art technical contri- tions, three invited talks, a special session on hearing-aid design, and an embedded - torial. The technical program focused on timing, performance and power consumption, as well as architectural aspects with particular emphasis on modeling, design, char- terization, analysis and optimization in the nanometer era. The Technical Program Committee, with the assistance of additional expert revi- ers, selected the 74 papers to be presented at PATMOS. The papers were divided into 11 technical sessions and 3 poster sessions. As is always the case with the PATMOS workshops, the review process was anonymous, full papers were required, and several reviews were carried out per paper. Beyond the presentations of the papers, the PATMOS technical program was - riched by a series of speeches offered by world class experts, on important emerging research issues of industrial relevance. Prof. Jan Rabaey, Berkeley, USA, gave a talk on “Traveling the Wild Frontier of Ulta Low-Power Design”, Dr. Sung Bae Park, S- sung, gave a presentation on “DVL (Deep Low Voltage): Circuits and Devices”, Prof.

Download or read book Disruptive Logic Architectures and Technologies written by Pierre-Emmanuel Gaillardon and published by Springer Science & Business Media. This book was released on 2012-04-24 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the opportunities offered by disruptive technologies to overcome the economical and physical limits currently faced by the electronics industry. It provides a new methodology for the fast evaluation of an emerging technology from an architectural prospective and discusses the implications from simple circuits to complex architectures. Several technologies are discussed, ranging from 3-D integration of devices (Phase Change Memories, Monolithic 3-D, Vertical NanoWires-based transistors) to dense 2-D arrangements (Double-Gate Carbon Nanotubes, Sublithographic Nanowires, Lithographic Crossbar arrangements). Novel architectural organizations, as well as the associated tools, are presented in order to explore this freshly opened design space.

Download or read book Embedded Systems Handbook 2 Volume Set written by Richard Zurawski and published by CRC Press. This book was released on 2018-10-08 with total page 1503 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past few years there has been an dramatic upsurge in research and development, implementations of new technologies, and deployments of actual solutions and technologies in the diverse application areas of embedded systems. These areas include automotive electronics, industrial automated systems, and building automation and control. Comprising 48 chapters and the contributions of 74 leading experts from industry and academia, the Embedded Systems Handbook, Second Edition presents a comprehensive view of embedded systems: their design, verification, networking, and applications. The contributors, directly involved in the creation and evolution of the ideas and technologies presented, offer tutorials, research surveys, and technology overviews, exploring new developments, deployments, and trends. To accommodate the tremendous growth in the field, the handbook is now divided into two volumes. New in This Edition: Processors for embedded systems Processor-centric architecture description languages Networked embedded systems in the automotive and industrial automation fields Wireless embedded systems Embedded Systems Design and Verification Volume I of the handbook is divided into three sections. It begins with a brief introduction to embedded systems design and verification. The book then provides a comprehensive overview of embedded processors and various aspects of system-on-chip and FPGA, as well as solutions to design challenges. The final section explores power-aware embedded computing, design issues specific to secure embedded systems, and web services for embedded devices. Networked Embedded Systems Volume II focuses on selected application areas of networked embedded systems. It covers automotive field, industrial automation, building automation, and wireless sensor networks. This volume highlights implementations in fast-evolving areas which have not received proper coverage in other publications. Reflecting the unique functional requirements of different application areas, the contributors discuss inter-node communication aspects in the context of specific applications of networked embedded systems.

Download or read book Embedded Systems Handbook written by Richard Zurawski and published by CRC Press. This book was released on 2018-09-03 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considered a standard industry resource, the Embedded Systems Handbook provided researchers and technicians with the authoritative information needed to launch a wealth of diverse applications, including those in automotive electronics, industrial automated systems, and building automation and control. Now a new resource is required to report on current developments and provide a technical reference for those looking to move the field forward yet again. Divided into two volumes to accommodate this growth, the Embedded Systems Handbook, Second Edition presents a comprehensive view on this area of computer engineering with a currently appropriate emphasis on developments in networking and applications. Those experts directly involved in the creation and evolution of the ideas and technologies presented offer tutorials, research surveys, and technology overviews that explore cutting-edge developments and deployments and identify potential trends. This first self-contained volume of the handbook, Embedded Systems Design and Verification, is divided into three sections. It begins with a brief introduction to embedded systems design and verification. It then provides a comprehensive overview of embedded processors and various aspects of system-on-chip and FPGA, as well as solutions to design challenges. The final section explores power-aware embedded computing, design issues specific to secure embedded systems, and web services for embedded devices. Those interested in taking their work with embedded systems to the network level should complete their study with the second volume: Network Embedded Systems.

Download or read book EDA for IC Implementation Circuit Design and Process Technology written by Luciano Lavagno and published by CRC Press. This book was released on 2018-10-03 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a comprehensive overview of the design automation algorithms, tools, and methodologies used to design integrated circuits, the Electronic Design Automation for Integrated Circuits Handbook is available in two volumes. The second volume, EDA for IC Implementation, Circuit Design, and Process Technology, thoroughly examines real-time logic to GDSII (a file format used to transfer data of semiconductor physical layout), analog/mixed signal design, physical verification, and technology CAD (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability at the nanoscale, power supply network design and analysis, design modeling, and much more. Save on the complete set.

Download or read book Applied Reconfigurable Computing written by Kentaro Sano and published by Springer. This book was released on 2015-03-30 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 11th International Symposium on Applied Reconfigurable Computing, ARC 2015, held in Bochum, Germany, in April 2015. The 23 full papers and 20 short papers presented in this volume were carefully reviewed and selected from 85 submissions. They are organized in topical headings named: architecture and modeling; tools and compilers; systems and applications; network-on-a-chip; cryptography applications; extended abstracts of posters. In addition, the book contains invited papers on funded R&D - running and completed projects and Horizon 2020 funded projects.

Download or read book Handbook of Algorithms for Physical Design Automation written by Charles J. Alpert and published by CRC Press. This book was released on 2008-11-12 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt: The physical design flow of any project depends upon the size of the design, the technology, the number of designers, the clock frequency, and the time to do the design. As technology advances and design-styles change, physical design flows are constantly reinvented as traditional phases are removed and new ones are added to accommodate changes in

Download or read book Intelligent Systems Design and Applications written by Ajith Abraham and published by Springer Nature. This book was released on 2021-06-02 with total page 1440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent research on intelligent systems and nature-inspired computing. It presents 130 selected papers from the 19th International Conference on Intelligent Systems Design and Applications (ISDA 2020), which was held online. The ISDA is a premier conference in the field of computational intelligence, and the latest installment brought together researchers, engineers and practitioners whose work involves intelligent systems and their applications in industry. Including contributions by authors from 40 countries, the book offers a valuable reference guide for all researchers, students and practitioners in the fields of Computer Science and Engineering.

Download or read book Electronic Design Automation for IC Implementation Circuit Design and Process Technology written by Luciano Lavagno and published by CRC Press. This book was released on 2017-02-03 with total page 893 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second of two volumes in the Electronic Design Automation for Integrated Circuits Handbook, Second Edition, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology thoroughly examines real-time logic (RTL) to GDSII (a file format used to transfer data of semiconductor physical layout) design flow, analog/mixed signal design, physical verification, and technology computer-aided design (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability (DFM) at the nanoscale, power supply network design and analysis, design modeling, and much more. New to This Edition: Major updates appearing in the initial phases of the design flow, where the level of abstraction keeps rising to support more functionality with lower non-recurring engineering (NRE) costs Significant revisions reflected in the final phases of the design flow, where the complexity due to smaller and smaller geometries is compounded by the slow progress of shorter wavelength lithography New coverage of cutting-edge applications and approaches realized in the decade since publication of the previous edition—these are illustrated by new chapters on 3D circuit integration and clock design Offering improved depth and modernity, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology provides a valuable, state-of-the-art reference for electronic design automation (EDA) students, researchers, and professionals.

Download or read book Handbook of FPGA Design Security written by Ted Huffmire and published by Springer Science & Business Media. This book was released on 2010-06-18 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to provide a practical approach to managing security in FPGA designs for researchers and practitioners in the electronic design automation (EDA) and FPGA communities, including corporations, industrial and government research labs, and academics. This book combines theoretical underpinnings with a practical design approach and worked examples for combating real world threats. To address the spectrum of lifecycle and operational threats against FPGA systems, a holistic view of FPGA security is presented, from formal top level speci?cation to low level policy enforcement mechanisms, which integrates recent advances in the ?elds of computer security theory, languages, compilers, and hardware. The net effect is a diverse set of static and runtime techniques that, working in coope- tion, facilitate the composition of robust, dependable, and trustworthy systems using commodity components. We wish to acknowledge the many people who helped us ensure the success of ourworkonrecon?gurablehardwaresecurity.Inparticular,wewishtothankAndrei Paun and Jason Smith of Louisiana Tech University for providing us with a Lin- compatible version of Grail+. We also wish to thank those who gave us comments on drafts of this book, including Marco Platzner of the University of Paderborn, and Ali Irturk and Jason Oberg of the University of California, San Diego. This research was funded in part by National Science Foundation Grant CNS-0524771 and NSF Career Grant CCF-0448654.

Download or read book Architecture of Computing Systems ARCS 2008 written by Theo Ungerer and published by Springer Science & Business Media. This book was released on 2008-02-12 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 21st International Conference on Architecture of Computing Systems, ARCS 2008, held in Dresden, Germany, in February 2008. The 19 revised full papers presented together with 2 keynote papers were carefully reviewed and selected from 47 submissions. The papers cover a wide spectrum reaching from pre-fabrication adaptation of architectural templates to dynamic run-time adaptation of deployed systems with special focus on adaptivity and adaptive system architectures. The papers are organized in topical sections on hardware design, pervasive computing, network processors and memory management, reconfigurable hardware, real-time architectures, organic computing, and computer architecture.

Download or read book FPGA Design Automation written by Deming Chen and published by Now Publishers Inc. This book was released on 2006 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: FPGA Design Automation: A Survey is an up-to-date comprehensive survey/tutorial of FPGA design automation, with an emphasis on the recent developments within the past 5 to 10 years. The focus is on the theory and techniques that have been, or most likely will be, reduced to practice. It covers all major steps in FPGA design flow: routing and placement, circuit clustering, technology mapping and architecture-specific optimization, physical synthesis, RT-level and behavior-level synthesis, and power optimization. FPGA Design Automation: A Survey can be used as both a guide for beginners who are embarking on research in this relatively young yet exciting area, and a useful reference for established researchers in this field.

Download or read book FPGA Architecture written by Ian Kuon and published by Now Publishers Inc. This book was released on 2008 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the historical development of programmable logic devices, the fundamental programming technologies that the programmability is built on, and then describes the basic understandings gleaned from research on architectures. It is an invaluable reference for engineers and computer scientists.

Download or read book Integrated Circuit and System Design Power and Timing Modeling Optimization and Simulation written by Jose L. Ayala and published by Springer. This book was released on 2011-09-25 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 21st International Conference on Integrated Circuit and System Design, PATMOS 2011, held in Madrid, Spain, in September 2011. The 34 revised full papers presented were carefully reviewed and selected from numerous submissions. The paper feature emerging challenges in methodologies and tools for the design of upcoming generations of integrated circuits and systems and focus especially on timing, performance and power consumption as well as architectural aspects with particular emphasis on modeling, design, characterization, analysis and optimization.

Download or read book Principles and Structures of FPGAs written by Hideharu Amano and published by Springer. This book was released on 2018-09-03 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive textbook on the field programmable gate array (FPGA) covers its history, fundamental knowledge, architectures, device technologies, computer-aided design technologies, design tools, examples of application, and future trends. Programmable logic devices represented by FPGAs have been rapidly developed in recent years and have become key electronic devices used in most IT products. This book provides both complete introductions suitable for students and beginners, and high-level techniques useful for engineers and researchers in this field. Differently developed from usual integrated circuits, the FPGA has unique structures, design methodologies, and application techniques. Allowing programming by users, the device can dramatically reduce the rising cost of development in advanced semiconductor chips. The FPGA is now driving the most advanced semiconductor processes and is an all-in-one platform combining memory, CPUs, and various peripheral interfaces. This book introduces the FPGA from various aspects for readers of different levels. Novice learners can acquire a fundamental knowledge of the FPGA, including its history, from Chapter 1; the first half of Chapter 2; and Chapter 4. Professionals who are already familiar with the device will gain a deeper understanding of the structures and design methodologies from Chapters 3 and 5. Chapters 6–8 also provide advanced techniques and cutting-edge applications and trends useful for professionals. Although the first parts are mainly suitable for students, the advanced sections of the book will be valuable for professionals in acquiring an in-depth understanding of the FPGA to maximize the performance of the device.