Download or read book AQA GCSE 9 1 Design and Technology Electrical and Mechanical Systems and Components written by Bryan Williams and published by Hodder & Stoughton. This book was released on 2017-10-02 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build in-depth understanding and inspire your students to tackle design challenges both practically and creatively, with a textbook that delivers the Core Technical plus Specialist Technical and Design & Making Principles needed for the 2017 AQA D&T GCSE. The insight of our author team will build topic knowledge, including the technical principles of materials with which you are less familiar, while focusing on the specialist principles of electrical and mechanical systems and components in more depth, to ensure you can navigate the specification with confidence whilst your students' ideas flourish. · Trusted author team of specialist teachers and those with examining experience · Build topic knowledge with learning objectives directly linked to the specification and short activities to reinforce understanding · Develop mathematical and scientific knowledge and understanding with activities that link topics to maths and science · Inspire your students as they undertake the iterative design process, with examples of imaginative design-and-make tasks, and a look at how to approach the Non-Exam Assessment · Check knowledge and understanding with end of topic summaries and practice questions for the written exam
Download or read book AQA GCSE 9 1 Design Technology written by Bryan Williams; Louise Attwood; Pauline Treuherz; Ian Fawcett; Dan Hughes; Dave Larby and published by . This book was released on 2017 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exam Board: AQALevel: GCSESubject: D & TFirst Teaching: September 2017First Exam: June 2019 Build in-depth understanding and inspire your students to tackle design challenges both practically and creatively, with a textbook that delivers the Core Technical plus Specialist Technical and Design & Making Principles needed for the 2017 AQA D & T GCSE. The insight of our author team will build topic knowledge, including the technical principles of materials with which you are less familiar, while focusing on the specialist principles of timber, metal-based materials and polymers in more depth, to en.
Download or read book My Revision Notes AQA GCSE 9 1 Design and Technology All Material Categories and Systems written by Ian Fawcett and published by Hodder Education. This book was released on 2018-06-29 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exam board: AQA Level: GCSE Subject: Design and Technology First teaching: September 2017 First exams: Summer 2019 Target success in AQA GCSE (9-1) Design and Technology with this proven formula for effective, structured revision. Key content coverage is combined with exam-style tasks and practical tips to create a revision guide that students can rely on to review, strengthen and test their knowledge. With My Revision Notes, every student can: - plan and manage a successful revision programme using the topic-by-topic planner - consolidate subject knowledge by working through clear and focused content coverage - test understanding and identify areas for improvement with regular 'Now Test Yourself' tasks and answers - improve exam technique through practice questions, expert tips and examples of typical mistakes to avoid - get exam ready with extra quick quizzes and answers to the practice questions available online.
Download or read book AQA GCSE 9 1 Design and Technology All Material Categories and Systems written by Bryan Williams and published by Hodder Education. This book was released on 2017-07-31 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exam Board: AQA Level: GCSE Subject: D&T First Teaching: September 2017 First Exam: June 2019 Build in-depth understanding and inspire your students to tackle design challenges both practically and creatively, with a textbook that delivers the Core Technical plus Specialist Technical and Design & Making Principles needed for the 2017 AQA D&T GCSE. The insight of our author team will build topic knowledge, including the technical principles of materials with which you are less familiar, to ensure you can navigate the specification with confidence whilst your students' ideas flourish. · Trusted author team of specialist teachers and those with examining experience · Build topic knowledge with learning objectives directly linked to the specification and short activities to reinforce understanding · Develop mathematical and scientific knowledge and understanding with activities that link topics to maths and science · Inspire your students as they undertake the iterative design process, with examples of imaginative design-and-make tasks, and a look at how to approach the Non-Exam Assessment · Check knowledge and understanding with end of topic summaries and practice questions for the written exam
Download or read book AQA GCSE 9 1 Design and Technology Paper and Boards written by Bryan Williams and published by Hodder Education. This book was released on 2017-08-31 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build in-depth understanding and inspire your students to tackle design challenges both practically and creatively, with a textbook that delivers the Core Technical plus Specialist Technical and Design & Making Principles needed for the 2017 AQA D&T GCSE. The insight of our author team will build topic knowledge, including the technical principles of materials with which you are less familiar, while focusing on the specialist principles of paper and boards in more depth, to ensure you can navigate the specification with confidence whilst your students' ideas flourish. · Trusted author team of specialist teachers and those with examining experience · Build topic knowledge with learning objectives directly linked to the specification and short activities to reinforce understanding · Develop mathematical and scientific knowledge and understanding with activities that link topics to maths and science · Inspire your students as they undertake the iterative design process, with examples of imaginative design-and-make tasks, and a look at how to approach the Non-Exam Assessment · Check knowledge and understanding with end of topic summaries and practice questions for the written exam
Download or read book AQA GCSE 9 1 Design and Technology Textile Based Materials written by Bryan Williams and published by Hodder Education. This book was released on 2017-09-25 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build in-depth understanding and inspire your students to tackle design challenges both practically and creatively, with a textbook that delivers the Core Technical plus Specialist Technical and Design & Making Principles needed for the 2017 AQA D&T GCSE. The insight of our author team will build topic knowledge, including the technical principles of materials with which you are less familiar, while focusing on the specialist principles of textile-based materials in more depth, to ensure you can navigate the specification with confidence whilst your students' ideas flourish. · Trusted author team of specialist teachers and those with examining experience · Build topic knowledge with learning objectives directly linked to the specification and short activities to reinforce understanding · Develop mathematical and scientific knowledge and understanding with activities that link topics to maths and science · Inspire your students as they undertake the iterative design process, with examples of imaginative design-and-make tasks, and a look at how to approach the Non-Exam Assessment · Check knowledge and understanding with end of topic summaries and practice questions for the written exam
Download or read book AQA GCSE 9 1 Design and Technology Timber Metal Based Materials and Polymers written by Bryan Williams and published by Hodder Education. This book was released on 2017-08-31 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exam Board: AQA Level: GCSE Subject: D&T First Teaching: September 2017 First Exam: June 2019 Build in-depth understanding and inspire your students to tackle design challenges both practically and creatively, with a textbook that delivers the Core Technical plus Specialist Technical and Design & Making Principles needed for the 2017 AQA D&T GCSE. The insight of our author team will build topic knowledge, including the technical principles of materials with which you are less familiar, while focusing on the specialist principles of timber, metal-based materials and polymers in more depth, to ensure you can navigate the specification with confidence whilst your students' ideas flourish. · Trusted author team of specialist teachers and those with examining experience · Build topic knowledge with learning objectives directly linked to the specification and short activities to reinforce understanding · Develop mathematical and scientific knowledge and understanding with activities that link topics to maths and science · Inspire your students as they undertake the iterative design process, with examples of imaginative design-and-make tasks, and a look at how to approach the Non-Exam Assessment · Check knowledge and understanding with end of topic summaries and practice questions for the written exam
Download or read book Aqa GCSE 9 1 Design Technology 8552 written by M. J. Ross and published by Pg Online Limited. This book was released on 2017-05-05 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a brand new book that provides comprehensive yet concise coverage of all the topics and disciplines covered in the new AQA 8552 Design and Technology (9-1) specification, written and presented in a way that is accessible to teenagers and easy to teach from. It will be invaluable both as a course text and as a revision guide for students nearing the end of their course. It is divided into neat sections covering every element of the specification. Sections 5A to 5F of the textbook cover each of the six specialist technical areas. These sections would complement practical classroom experience. Solutions to all questions and exercises are provided in a free teacher pack available on our website. To accompany this textbook, PG Online also publishes a series of 12 downloadable teaching units. Each topic in a unit consists of a PowerPoint presentation, teacher's notes, worksheets, homework sheets and a final assessment test with practice questions. Each topic within a unit is expected to be taught over several lessons in a week. Units are sold as a lifetime site licence and may be loaded onto the school's private network or VLE.
Download or read book Electronics and Control Systems written by Terry Bream and published by . This book was released on 2009-09-01 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This resource helps students to identify a variety of methods they need to use when prototyping, including breadboard and CAD simulation, as well as understand the principles of anthropometrics and ergonomics when designing and making products.
Download or read book Teaching STEM in the Secondary School written by Frank Banks and published by Routledge. This book was released on 2020-12-30 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book looks at the purpose and pedagogy of STEM teaching and explores the ways in which STEM subjects can interact in the curriculum to enhance student understanding, achievement and motivation. By reaching outside their own classroom, teachers can collaborate across STEM subjects to enrich learning and help students relate school science, technology and maths to the wider world. Packed with ideas and practical details for teachers of STEM subjects, the new revised edition of this book: ■ considers what the STEM subjects contribute separately to the curriculum and how they relate to each other in the wider education of secondary school students; ■ describes and evaluates different curriculum models for STEM; ■ suggests ways in which a critical approach to the pedagogy of the classroom, laboratory and workshop can support and encourage all pupils to engage fully in STEM; ■ addresses the practicalities of introducing, organising and sustaining STEM-related activities in the secondary school; ■ looks to ways schools can manage and sustain STEM approaches in the long-term. This new revised edition is essential reading for trainee and practising teachers, those engaged in further professional development and all who wish to make the learning of science, technology, engineering and mathematics an interesting, motivating and exciting experience for their students.
Download or read book Cambridge IGCSE Computer Science written by David Watson and published by Hodder Education. This book was released on 2015-01-30 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Endorsed by Cambridge Assessment International Education. Develop computational thinking and programming skills with complete coverage of the latest syllabus from experienced examiners and teachers. - Follows the order of the syllabus exactly, ensuring complete coverage - Introduces students to self-learning exercises, helping them learn how to use their knowledge in new scenarios - Accompanying animation files of the key concepts are available to download for free online. www.hoddereducation.co.uk/cambridgeextras-1 - Answers are available on the Teacher's CD. This book covers the IGCSE (0478), O Level (2210) and US IGCSE entry (0473) syllabuses, which are for first examination 2015. It may also be a useful reference for students taking the new Computer Science AS level course (9608).
Download or read book Developing Models in Science Education written by J.K. Gilbert and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Models and modelling play a central role in the nature of science, in its conduct, in the accreditation and dissemination of its outcomes, as well as forming a bridge to technology. They therefore have an important place in both the formal and informal science education provision made for people of all ages. This book is a product of five years collaborative work by eighteen researchers from four countries. It addresses four key issues: the roles of models in science and their implications for science education; the place of models in curricula for major science subjects; the ways that models can be presented to, are learned about, and can be produced by, individuals; the implications of all these for research and for science teacher education. The work draws on insights from the history and philosophy of science, cognitive psychology, sociology, linguistics, and classroom research, to establish what may be done and what is done. The book will be of interest to researchers in science education and to those taking courses of advanced study throughout the world.
Download or read book Developing a Design Brief written by Suzanne Robinson and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book AQA GCSE 9 1 Geography written by John Widdowson and published by . This book was released on 2016-05-27 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: AQA approved Stretch and challenge your students to achieve their full potential with learning materials that guide them through the new content and assessment requirements; developed by subject experts with examining experience and one of the leading Geography publishers. - Enables students to learn and practise geographical, mathematical and statistical skills through engaging activities specifically designed for the reformed 2016 curriculum - Helps higher ability students boost their knowledge and understanding via suitably challenging extension tasks that go beyond the core content - Develops students' skills responding to a range of questions with topic-specific Question Practice in each section, supplemented by practical insight from skilled teachers with examining experience - Incorporates possible fieldwork enquiries throughout with unrivalled advice on the changed fieldwork assessment from authors specialising in this key area - Reduces your research time by providing a bank of contemporary case studies that includes numerous UK examples for the revised criteria
Download or read book AQA GCSE 9 1 Design and Technology written by Ian Fawcett and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Standards for K 12 Engineering Education written by National Research Council and published by National Academies Press. This book was released on 2010-10-28 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this study was to assess the value and feasibility of developing and implementing content standards for engineering education at the K-12 level. Content standards have been developed for three disciplines in STEM education-science, technology, and mathematic-but not for engineering. To date, a small but growing number of K-12 students are being exposed to engineering-related materials, and limited but intriguing evidence suggests that engineering education can stimulate interest and improve learning in mathematics and science as well as improve understanding of engineering and technology. Given this background, a reasonable question is whether standards would improve the quality and increase the amount of teaching and learning of engineering in K-12 education. The book concludes that, although it is theoretically possible to develop standards for K-12 engineering education, it would be extremely difficult to ensure their usefulness and effective implementation. This conclusion is supported by the following findings: (1) there is relatively limited experience with K-12 engineering education in U.S. elementary and secondary schools, (2) there is not at present a critical mass of teachers qualified to deliver engineering instruction, (3) evidence regarding the impact of standards-based educational reforms on student learning in other subjects, such as mathematics and science, is inconclusive, and (4) there are significant barriers to introducing stand-alone standards for an entirely new content area in a curriculum already burdened with learning goals in more established domains of study.
Download or read book Good Practice In Science Teaching What Research Has To Say written by Osborne, Jonathan and published by McGraw-Hill Education (UK). This book was released on 2010-05-01 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a summary of the findings that educational research has to offer on good practice in school science teaching. It offers an overview of scholarship and research in the field, and introduces the ideas and evidence that guide it.
