Download or read book APS Storage Ring Vacuum Chamber Fabrication written by and published by . This book was released on 1990 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1104-m circumference Advanced Photon Source Storage Ring Vacuum System is composed of 240 individual sections, which are fabricated from a combination of aluminum extrusions and machined components. The vacuum chambers will have 3800 weld joints, each subject to strict vacuum requirements, as well as a variety of related design criteria. The vacuum criteria and chamber design are reviewed, including a discussion of the weld joint geometries. The critical fabrication process parameters for meeting the design requirements are discussed. The experiences of the prototype chamber fabrication program are presented. Finally, the required facilities preparation for construction activity is briefly described. 6 refs., 6 figs., 1 tab.
Download or read book APS Storage Ring Vacuum Chamber Fabrication written by and published by . This book was released on 1990 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vacuum System Development Status for the APS Advanced Photon Source Storage Ring written by and published by . This book was released on 1989 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The status of the design and fabrication of a prototype sector of the storage ring vacuum system for the Advanced Photon Source is described. The 26.5-m-long prototype sector will be assembled within a full-scale magnet and tunnel mockup to study interspacial component relationships for maintenance, as well as the vacuum system operational performance. Each completed vacuum section is mounted as an integral part of the modular structure that contains the magnets and magnet power supplies on a common base. Unique automatic machine welding designs and techniques are employed in the fabrication of the aluminium vacuum chambers from extrusions. Special chamber bending procedures and measurements checks are used to maintain the required flatness of the insider chamber light gap surfaces. Photo-electron yields due to low-energy photons in the narrow channel gap of the vacuum chamber and their potential effects on the overall outgassing rate are found to be negligible. 9 refs., 5 figs.
Download or read book Vibration Study of the APS Storage Ring Vacuum chamber written by J.A. Jendrzejczyk and published by . This book was released on 1991 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book APS Storage Ring Vacuum Chamber written by and published by . This book was released on 1995 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vacuum characteristics of the APS storage ring vacuum chamber prototype, Section One (S1), is presented. The base pressure achieved was 4 x 10−11, the welds contained no virtual or real leaks, the NeG strip mounting design and activation procedures have been determined, and S1 was found contaminated with hydrocarbons.
Download or read book Advanced Photon Source Experience with Vacuum Chambers for Insertion Devices written by and published by . This book was released on 1997 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last five years, a new approach to the design and fabrication of extruded aluminum vacuum chambers for insertion devices was developed at the Advanced Photon Source (APS). With this approach, three different versions of the vacuum chamber, with vertical apertures of 12 mm, 8 mm, and 5 mm, were manufactured and tested. Twenty chambers were installed into the APS vacuum system. All have operated with beam, and 16 have been coupled with insertion devices. Two different vacuum chambers with vertical apertures of 16 mm and 11 mm were developed for the BESSY-II storage ring and 3 of 16 mm chambers were manufactured.
Download or read book APS Storage Ring Vacuum Chamber Tests for Dimensional Stability After Bakeout Cycling While Under Vacuum written by and published by . This book was released on 1990 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vacuum chamber sections No. 1 and No. 2 were used for these tests. Section No. 1, a short straight section, is representative in these tests of Sections No. 3 and No. 5 as well. Section No. 2 is the longer curved section used within the dipole bend magnets and is representative of the similar Section No. 4. The combination of Sections No. 1 and No. 2 joined by a connected bellows was mounted as presently planned for the final installation. This afforded an early testing of chamber positional stability after bakeout cycling. Tests of chamber dimensional stability were also made during vacuum cycling.
Download or read book UHV Seal Studies for the Advanced Photon Source Storage Ring Vacuum System written by and published by . This book was released on 1991 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Advanced Photon Source (APS) Storage Ring Vacuum Chambers (SRVC) are constructed of aluminum. The chamber design incorporates aluminum alloy 2219-T87 Conflat flanges welded to an aluminum alloy 6063-T5 extruded chamber body. Vacuum connections to the aluminum Conflat chamber flanges are by means of 304 stainless steel Conflat flanges. To evaluate the Conflat seal assemblies relative to vacuum bake cycles, a Conflat Bake Test Assembly (CBTA) was constructed, and thermal cycling tests were performed between room temperature and 150°C on both stainless steel to aluminum Conflat assemblies and aluminum to aluminum Conflat assemblies. A Helicoflex Bake Test Assembly (HBTA) was similarly constructed to evaluate Helicoflex seals. Both Conflat and Helicoflex seals were studied in a SRVC Sector String Test arrangement of five SRVC sections. The CBTA, HBTA and SRVC tests and their results are reported. 3 refs., 2 figs., 2 tabs.
Download or read book Vacuum Design of Synchrotron Light Sources written by Yeldez G. Amer and published by American Institute of Physics. This book was released on 1991 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book APS Storage Ring Vacuum System written by and published by . This book was released on 1990 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Vacuum Science and Technology written by Dorothy Hoffman and published by Elsevier. This book was released on 1997-10-29 with total page 861 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Vacuum Technology consists of the latest innovations in vacuum science and technology with a strong orientation towards the vacuum practitioner. It covers many of the new vacuum pumps, materials, equipment, and applications. It also details the design and maintenance of modern vacuum systems. The authors are well known experts in their individual fields with the emphasis on performance, limitations, and applications rather than theory. There aremany useful tables, charts, and figures that will be of use to the practitioner. User oriented with many useful tables, charts, and figures of use to the practitioner Reviews new vacuum materials and equipment Illustrates the design and maintenance of modern vacuum systems Includes well referenced chapters
Download or read book APS Storage Ring Vacuum System Performance written by and published by . This book was released on 1997 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Advanced Photon Source (APS) storage ring was designed to operated with 7-GeV, 100-mA positron beam with lifetimes> 20 hours. The lifetime is limited by residual gas scattering and Touschek scattering at this time. Photon-stimulated desorption and microwave power in the rf cavities are the main gas loads. Comparison of actual system gas loads and design calculations will be given. In addition, several special features of the storage ring vacuum system will be presented.
Download or read book Vacuum System Development Status for the APS Storage Ring written by and published by . This book was released on 1989 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book APS Storage Ring Vacuum System Development written by and published by . This book was released on 1991 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Logos written by and published by . This book was released on 1992 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research and Highlights written by Argonne National Laboratory and published by . This book was released on 1990 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993-10 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt:
