Download or read book Applied Mineralogy in the Mining Industry written by W. Petruk and published by Elsevier. This book was released on 2000-11-29 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Techniques of performing applied mineralogy investigations, and applications and capabilities of recently developed instruments for measuring mineral properties are explored in this book intended for practicing applied mineralogists, students in mineralogy and metallurgy, and mineral processing engineers. The benefits of applied mineralogy are presented by using in-depth applied mineralogy studies on base metal ores, gold ores, porphyry copper ores, iron ores and industrial minerals as examples. The chapter on base metal ores includes a discussion on the effects of liberation, particle sizes and surfaces coatings of Pb, Cu, Fe, Ca and So4- on the recoveries of sphalerite, galena and chalcopyrite. The chapter on gold discusses various methods of determining the quantities of gold in different minerals, including 'invisible' gold in pyrite and arsenopyrite, so that a balance of the distribution of gold among the minerals can be calculated. This book also discusses the roles of pyrite, oxygen, moisture and bacterial (thiobacillus ferrooxidans) on reactions that produce acidic drainage from tailings piles, and summarizes currently used and proposed methods of remediation of acidic drainage.
Download or read book Applied Mineralogy written by Swapna Mukherjee and published by Springer Science & Business Media. This book was released on 2012-03-05 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the entire spectrum of mineralogy and consolidates its applications in different fields. Part I starts with the very basic concept of mineralogy describing in detail the implications of the various aspects of mineral chemistry, crystallographic structures and their effects producing different mineral properties. Part II of the book describes different aspects of mineralogy like geothermobarometry, mineral thermodynamics and phase diagrams, mineral exploration and analysis, and marine minerals. Finally Part III handles the applications in industrial, medicinal and environmental mineralogy along with precious and semiprecious stone studies. The various analytical techniques and their significance in handling specific types of mineralogical problems are also covered.
Download or read book Applied Clay Mineralogy written by Haydn H. Murray and published by Elsevier. This book was released on 2006-12-14 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on Applied Clay Mineralogy is comprehensive. It covers the structure, composition, and physical and chemical properties of kaolinite, halloysite, ball clays; bentonites including sodium montmorillonite, calcium montmorillonite, and hectorite; and palygorskite and sepiolite. There is also a short chapter on common clays which are used for making structural clay products and lightweight aggregate. The location and geology of the major clay deposits that are marketed worldwide and regionally include kaolins from the United States, Southwest England, Brazil, and the Czech Republic along with halloysite from New Zealand and ball clays from the US, England, Germany, and Ukraine. Bentonites from the U.S. and Europe are included along with palygorskite and sepiolite from the U.S., China, Senegal, and Spain. The mining and processing of the various clays are described. Extensive discussions of the many applications of the clays are included. The appendices cover the important laboratory tests that are used to identify and evaluate the various types of clay. Many figures are included covering electron micrographs, processing flow sheets, stratigraphy, and location maps. * Provides the structure and composition of clay minerals, as well as their phyisical and chemical properties * Discusses pplications for Kaolin, Bentonite, Palygorskite and Sepiolite * Contains appendixes of laboratory tests and procedures, as well as a test for common clays
Download or read book Introduction to Mineralogy and Petrology written by Swapan Kumar Haldar and published by Elsevier. This book was released on 2020-07-29 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Mineralogy and Petrology, second edition, presents the essentials of both disciplines through an approach accessible to industry professionals, academic researchers, and students alike. This new edition emphasizes the relationship between rocks and minerals, right from the structures created during rock formation through the economics of mineral deposits. While petrology is classified on the lines of geological evolution and rock formation, mineralogy speaks to the physical and chemical properties, uses, and global occurrences for each mineral, emphasizing the need for the growth of human development. The primary goal is for the reader to identify minerals in all respects, including host-rocks, and mineral deposits, with additional knowledge of mineral-exploration, resource, extraction, process, and ultimate use. To help provide a comprehensive analysis across ethical and socio-economic dimensions, a separate chapter describes the hazards associated with minerals, rocks, and mineral industries, and the consequences to humanity along with remedies and case studies. New to the second edition: includes coverage of minerals and petrology in extra-terrestrial environments as well as case studies on the hazards of the mining industry. Addresses the full scope of core concepts of mineralogy and petrology, including crystal structure, formation and grouping of minerals and soils, definition, origin, structure and classification of igneous, sedimentary and metamorphic rocks Features more than 250 figures, illustrations and color photographs to vividly explore the fundamental principles of mineralogy and petrology Offers a holistic approach to both subjects, beginning with the formation of geologic structures that is followed by the hosting of mineral deposits and the exploration and extraction of lucrative, usable products that improve the health of global economies Includes new content on minerals and petrology in extraterrestrial environments and case studies on hazards in the mining industry
Download or read book Wills Mineral Processing Technology written by Barry A. Wills and published by Elsevier. This book was released on 2011-04-18 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wills' Mineral Processing Technology provides practising engineers and students of mineral processing, metallurgy and mining with a review of all of the common ore-processing techniques utilized in modern processing installations. Now in its Seventh Edition, this renowned book is a standard reference for the mineral processing industry. Chapters deal with each of the major processing techniques, and coverage includes the latest technical developments in the processing of increasingly complex refractory ores, new equipment and process routes. This new edition has been prepared by the prestigious J K Minerals Research Centre of Australia, which contributes its world-class expertise and ensures that this will continue to be the book of choice for professionals and students in this field.This latest edition highlights the developments and the challenges facing the mineral processor, particularly with regard to the environmental problems posed in improving the efficiency of the existing processes and also in dealing with the waste created. The work is fully indexed and referenced. - The classic mineral processing text, revised and updated by a prestigious new team - Provides a clear exposition of the principles and practice of mineral processing, with examples taken from practice - Covers the latest technological developments and highlights the challenges facing the mineral processor - New sections on environmental problems, improving the efficiency of existing processes and dealing with waste.
Download or read book Soil Mineralogy with Environmental Applications written by Joe Boris Dixon and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Few books achieve a connection between scientifc theory and real world environmental problems, but this one does. Generous use of color images, exercises, and case studies make it friendly for the classroom or non-mineralogist. Discover crystallography, surface chemistry, mineral-solution equilibria, organic matter, and soil mineral analysis. The book includes a lengthy exploration of world-wide applications of mineralogy in soil taxonomy, tectonics, radionuclides, pesticides, enzymes, and more.
Download or read book Evolutionary and Revolutionary Technologies for Mining written by National Research Council and published by National Academies Press. This book was released on 2002-03-14 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Office of Industrial Technologies (OIT) of the U. S. Department of Energy commissioned the National Research Council (NRC) to undertake a study on required technologies for the Mining Industries of the Future Program to complement information provided to the program by the National Mining Association. Subsequently, the National Institute for Occupational Safety and Health also became a sponsor of this study, and the Statement of Task was expanded to include health and safety. The overall objectives of this study are: (a) to review available information on the U.S. mining industry; (b) to identify critical research and development needs related to the exploration, mining, and processing of coal, minerals, and metals; and (c) to examine the federal contribution to research and development in mining processes.
Download or read book Methods and Applications in Petroleum and Mineral Exploration and Engineering Geology written by Said Gaci and published by Elsevier. This book was released on 2021-06-19 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods and Applications in Petroleum and Mineral Exploration and Engineering Geology is an interdisciplinary book bridging the fields of earth sciences and engineering. It covers topics on natural resources exploration as well as the application of geological exploration methods and techniques to engineering problems. Each topic is presented through theoretical approaches that are illustrated by case studies from around the globe. Methods and Applications in Petroleum and Mineral Exploration and Engineering Geology is a key resource for both academics and professionals, offering both practical and applied knowledge in resources exploration and engineering geology. - Features new exploration technologies including seismic, satellite images, basin studies, geochemical modeling and analysis - Presents cases studies from different countries such as the Hoggar area (Algeria), Urals and Siberia (Russia), North of Chile (II and III regions), and North of Italy (Trentino Alto adige) - Includes applications of the novel methods discussed
Download or read book Highlights in Applied Mineralogy written by Soraya Heuss-Aßbichler and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-12-18 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: What can we learn from nature? The study of the physical, chemical and structural properties of well-known minerals in the geo- and biosphere creates new opportunities for innovative applications in technology, environment or medicine. This book highlights today’s research on outstanding minerals such as garnets used as components in all solid state batteries, delafossite formation during wastewater treatment, monazites for the immobilization of high level radioactive waste or hyroxylapatite as bioactive material for medical implant applications. Contents Part I: High-technology materials Lithium ion–conducting oxide garnets Olivine-type battery materials Natural and synthetic zeolites Microstructure analysis of chalcopyrite-type CuInSe2 and kesterite-type Cu2ZnSnSe4 absorber layers in thin film solar cells Surface-engineered silica via plasma polymer deposition Crystallographic symmetry analysis in NiTi shape memory alloys Part II: Environmental mineralogy Gold, silver, and copper in the geosphere and anthroposphere: can industrial wastewater act as an anthropogenic resource? Applied mineralogy for recovery from the accident of Fukushima Daiichi Nuclear Power Station Phosphates as safe containers for radionuclides Immobilization of high-level waste calcine (radwaste) in perovskites Titanate ceramics for high-level nuclear waste immobilization Part III: Biomineralization, biomimetics, and medical mineralogy Patterns of mineral organization in carbonate biological hard materials Sea urchin spines as role models for biological design and integrative structures Nacre: a biomineral, a natural biomaterial, and a source of bio-inspiration Hydroxylapatite coatings: applied mineralogy research in the bioceramics field A procedure to apply spectroscopic techniques in the investigation of silica-bearing industrial materials
Download or read book Introduction to Applied Mineralogy written by Jens Götze and published by Springer Nature. This book was released on 2023-08-22 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook teaches important material and technological fundamentals in various technical systems and applied geoscientific fields. Beginning with the mineralogical characteristics of selected non-metallic raw materials and industrial minerals, this book presents the connections between properties and industrial applications and discusses the environment-relevant aspects as well as problems of biomineralogy. An introduction is given to important mineralogical and physico-chemical aspects of ceramic materials such as silicate ceramics, glass, cement, refractory materials as well as an overview about material synthesis. This makes it the first textbook to present the fundamentals of applied mineralogy as a material-related geoscience in a compact form and to show important bridges to industrial issues and approaches to solutions. It is aimed primarily at undergraduate students of geosciences and materials science, but is also suitable for related disciplines and practical applications.
Download or read book Proceedings of the 11th International Congress for Applied Mineralogy ICAM written by Faqin Dong and published by Springer. This book was released on 2015-03-25 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings comprise the peer-reviewed contributions submitted to the 11th International Congress for Applied Mineralogy (ICAM) held July 5-10, 2013, at the Southwest University of Science and Technology (SWUST) in Mianyang, China. The biennial ICAM is the most important gathering of applied mineralogists, organized every other year by the ICAM-Council. The multidisciplinary research presented in this book will be of interest to scientists and professionals dealing with topics like environmental and medical mineralogy; industrial minerals; bio-minerals and biomaterials; advanced materials; process mineralogy; mining and metallurgy; cultural heritage; the interaction of minerals with microorganisms; and solid waste treatment and recycling, including genetic mineralogy. “The field of applied mineralogy has been able to match society’s pace by continuously reinventing itself, quickly adopting new technologies and instrumentation as they became available and putting them to work for the service of mankind living in a world that heavily relies on minerals. Over the past few decades, applied mineralogy has evolved into a cutting- edge discipline that leads the way for science, engineering and research and development to benefit society. Contrary to popular belief, mineral resources are limited, and we have an obligation to our heirs to use them responsibly.” Dr. Maarten A.T.M. Broekmans Post-President ICAM Council
Download or read book Proceedings of the 10th International Congress for Applied Mineralogy ICAM written by Maarten A.T.M. Broekmans and published by Springer Science & Business Media. This book was released on 2012-03-20 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises 96 peer-reviewed contributions submitted to the 10th ICAM Congress, held in Trondheim, Norway on 01-05 August 2011. Themes covered include: 1) Advanced materials, including high-performance technical ceramics and glasses, 2) Analytical techniques, instrumentation and automation, 3) Bio-mimetic mineral materials, medical mineralogy, 4) Construction materials including cement/SCMs, concrete, bricks, tiles, screeds, 5) Cultural heritage, stone artifacts and preservation, 6) Environment and energy mineralogy, including CO2 sequestration, 7) Geometallurgy and process mineralogy, and 8) Industrial minerals including gems, ore minerals, and mineral exploration.
Download or read book Minerals Critical Minerals and the U S Economy written by National Research Council and published by National Academies Press. This book was released on 2008-03-11 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Minerals are part of virtually every product we use. Common examples include copper used in electrical wiring and titanium used to make airplane frames and paint pigments. The Information Age has ushered in a number of new mineral uses in a number of products including cell phones (e.g., tantalum) and liquid crystal displays (e.g., indium). For some minerals, such as the platinum group metals used to make cataytic converters in cars, there is no substitute. If the supply of any given mineral were to become restricted, consumers and sectors of the U.S. economy could be significantly affected. Risks to minerals supplies can include a sudden increase in demand or the possibility that natural ores can be exhausted or become too difficult to extract. Minerals are more vulnerable to supply restrictions if they come from a limited number of mines, mining companies, or nations. Baseline information on minerals is currently collected at the federal level, but no established methodology has existed to identify potentially critical minerals. This book develops such a methodology and suggests an enhanced federal initiative to collect and analyze the additional data needed to support this type of tool.
Download or read book 14th International Congress for Applied Mineralogy ICAM2019 written by Sergey Glagolev and published by Springer Nature. This book was released on 2019-09-03 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access proceedings of the 14th International Council for Applied Mineralogy Congress (ICAM) in Belgorod, Russia cover a wide range of topics including applied mineralogy, advanced and construction materials, ore and industrial minerals, mineral exploration, cultural heritage, etc. It includes contributions to geometallurgy, industrial minerals, oil and gas reservoirs as well as stone artifacts and their preservation. The International Congress on Applied Mineralogy strengthens the relation between the research on applied mineralogy and the industry.
Download or read book Arctic Mineral Resources written by Sergey V. Krivovichev and published by MDPI. This book was released on 2019-04-23 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Arctic zone of the Earth is a major source of mineral and other natural resources for the future development of science and technology. It contains a large supply of strategic mineral deposits, including rare earths, copper, phosphorus, niobium, platinum-group elements, and other critical metals. The continued melting of the sea ice due to climate change makes these resources more accessible than ever before. However, the mineral exploration in the Arctic has always been a challenge due to the climatic restrictions, remote location, and vulnerability of Arctic ecosystems. This book covers a broad range of topics related to the problem of Arctic mineral resources, including geological, geochemical, and mineralogical aspects of their occurrence and formation; chemical technologies; and environmental and economic problems related to mineral exploration. The contributions can be tentatively classified into four major types: geodynamics and metallogeny, mineralogy and petrology, mineralogy and crystallography, and mining and chemical technologies associated with the exploration of mineral deposits and the use of raw materials for manufacturing new products. The book can be of interest for all those interested in Arctic issues and especially in Arctic mineral resources and associated problems of mineralogy, geology, geochemistry, and technology.
Download or read book Applied Mineralogy written by Won C. Park and published by . This book was released on 1985 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process Mineralogy written by Megan Becker and published by . This book was released on 2016-12-01 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
