Download or read book Reeds Vol 2 Applied Mechanics for Marine Engineers written by Paul Anthony Russell and published by Bloomsbury Publishing. This book was released on 2021-12-09 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the principal topics in applied mechanics for professional trainees studying Merchant Navy Marine Engineering Certificates of Competency (CoC) as well as the core syllabi in applied mechanics for undergraduates studying for BSc, BEng and MEng degrees in marine engineering, naval architecture and other marine technology related programmes. This new edition has been fully updated to reflect the recent changes to the Merchant Navy syllabus and current pathways to a sea-going engineering career, specifically the increased emphasis that has been placed on colleges and universities now responsible for the academic requirements for those studying for a career in marine engineering. In particular this means the book has been updated to include more information about the general principles and applications of the exercises in the practical world of marine engineering. Each chapter has fully worked examples interwoven into the text, with test examples set at the end of each chapter. Other revisions include examples reflecting modern machines and practice, current legislation and current syllabi.

Download or read book Engineering Mechanics written by C. Hartsuijker and published by Springer Science & Business Media. This book was released on 2007-03-06 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first of two volumes introducing structural and continuum mechanics in a comprehensive and consistent way. The current book presents all theoretical developments both in text and by means of an extensive set of figures. This same approach is used in the many examples, drawings and problems. Both formal and intuitive (engineering) arguments are used in parallel to derive the principles used, for instance in bending moment diagrams and shear force diagrams. A very important aspect of this book is the straightforward and consistent sign convention, based on the stress definitions of continuum mechanics. The book is suitable for self-education.

Download or read book Reeds Vol 2 Applied Mechanics written by Leslie Jackson and published by Reed's Almanac. This book was released on 2005-02-03 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the syllabuses in Applied Mechanics for all classes of the Marine Engineers' Certificates of Competency of the Department of Transport. It will also be useful to students on BTEC and SCOTVEC engineering courses. Basic principles are dealt with beginning at a fairly elementary stage. Each chapter has fully worked examples interwoven into the text, test examples are set at the end of each chapter, and some typical exam questions are included. The prefix 'f' is used to indicate those parts of the text, and some test examples, which are of Class 1 standard.

Download or read book Engineering Mechanics 2 written by Dietmar Gross and published by Springer. This book was released on 2018-03-12 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its second English edition, Mechanics of Materials is the second volume of a three-volume textbook series on Engineering Mechanics. It was written with the intention of presenting to engineering students the basic concepts and principles of mechanics in as simple a form as the subject allows. A second objective of this book is to guide the students in their efforts to solve problems in mechanics in a systematic manner. The simple approach to the theory of mechanics allows for the different educational backgrounds of the students. Another aim of this book is to provide engineering students as well as practising engineers with a basis to help them bridge the gaps between undergraduate studies, advanced courses on mechanics and practical engineering problems. The book contains numerous examples and their solutions. Emphasis is placed upon student participation in solving the problems. The new edition is fully revised and supplemented by additional examples. The contents of the book correspond to the topics normally covered in courses on basic engineering mechanics at universities and colleges. Volume 1 deals with Statics and Volume 3 treats Particle Dynamics and Rigid Body Dynamics. Separate books with exercises and well elaborated solutions are available.

Download or read book Applied Mechanics for Engineers written by C. B. Smith and published by Elsevier. This book was released on 2013-10-22 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Mechanics for Engineers, Volume 1 provides an introduction to mechanics applied to engineering. The worked examples correspond to the first year of the Ordinary National Certificate in Engineering, which are supported with theories discussed in this book. The calculations in this text have all been made with the assistance of a slide rule and it is recommended that the reader acquire a slide rule to make full use of this publication. The topics covered include forces and moments; beams, shear force, and bending moment diagrams; velocity and acceleration; friction; and work, power, and energy. The gas laws; vapors, steam-engine, and boiler; and internal combustion engines are also deliberated in this text. This volume is valuable to engineering students, as well as researchers conducting work on applied mechanics.

Download or read book Applied Mechanics Volume 2 written by Charles Edward Fuller and published by Legare Street Press. This book was released on 2023-07-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of applied mechanics, including in-depth coverage of topics such as statics, dynamics, and the mechanics of materials. Written by engineering experts Charles Edward Fuller and William Atkinson Johnston, it is an essential resource for students and professionals in the field of mechanical engineering. This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.

Download or read book Appletons Cyclop dia of Applied Mechanics written by Park Benjamin and published by . This book was released on 1880 with total page 1004 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Applied Mechanics written by and published by Elsevier. This book was released on 2007-04-04 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major developments in the fields of fluid and solid mechanics are scattered throughout an array of technical journals, often making it difficult to find what the real advances are, especially for a researcher new to the field or an individual interested in discovering the state-of-the-art in connection with applications. The Advances in Applied Mechanics book series draws together recent significant advances in various topics in applied mechanics. Published since 1948, Advances in Applied Mechanics aims to provide authoritative review articles on topics in the mechanical sciences, primarily of interest to scientists and engineers working in the various branches of mechanics, but also of interest to the many who use the results of investigations in mechanics in various application areas such as aerospace, chemical, civil, environmental, mechanical and nuclear engineering. Advances in Applied Mechanics continues to be a publication of high visibility and impact. Review articles are provided by active, leading scientists in the field by invitation of the editors. Many of the articles published have become classics within their fields. Volume 41 in the series contains articles on topological fluid mechanics, electrospinning, vortex dynamics and self-assembly. Covers all fields of the mechanical sciences Highlights classical and modern areas of mechanics that are ready for review Provides comprehensive coverage of the field in question

Download or read book Energy Methods in Applied Mechanics written by Henry L. Langhaar and published by Courier Dover Publications. This book was released on 2016-11-16 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated, modern treatment explores applications to dynamics of rigid bodies, analysis of elastic frames, general elastic theory, theory of plates and shells, theory of buckling, and theory of vibrations. Includes answers to problems. 1962 edition.

Download or read book Applied Mechanics of Solids written by Allan F. Bower and published by CRC Press. This book was released on 2009-10-05 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern computer simulations make stress analysis easy. As they continue to replace classical mathematical methods of analysis, these software programs require users to have a solid understanding of the fundamental principles on which they are based.Develop Intuitive Ability to Identify and Avoid Physically Meaningless PredictionsApplied Mechanics o

Download or read book Rational and Applied Mechanics written by Nikolai Nikolaevich Polyakhov and published by Springer Nature. This book was released on 2021-08-30 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Available for the first time in English, this two-volume course on theoretical and applied mechanics has been honed over decades by leading scientists and teachers, and is a primary teaching resource for engineering and maths students at St. Petersburg University. The course addresses classical branches of theoretical mechanics (Vol. 1), along with a wide range of advanced topics, special problems and applications (Vol. 2). This first volume of the textbook contains the parts “Kinematics” and “Dynamics”. The part “Kinematics” presents in detail the theory of curvilinear coordinates which is actively used in the part “Dynamics”, in particular, in the theory of constrained motion and variational principles in mechanics. For describing the motion of a system of particles, the notion of a Hertz representative point is used, and the notion of a tangent space is applied to investigate the motion of arbitrary mechanical systems. In the final chapters Hamilton-Jacobi theory is applied​ for the integration of equations of motion, and the elements of special relativity theory are presented. This textbook is aimed at students in mathematics and mechanics and at post-graduates and researchers in analytical mechanics.

Download or read book Reeds Vol 2 Applied Mechanics for Marine Engineers written by Paul A. Russell and published by Reeds. This book was released on 2022-01-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative guide to the principles of applied mechanics within a marine setting.

Download or read book Principles of Engineering Mechanics written by Millard F. Beatty and published by Springer Science & Business Media. This book was released on 2005-11-30 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation of the elements of classical mechanics into kinematics and dynamics is an uncommon tutorial approach, but the author uses it to advantage in this two-volume set. Students gain a mastery of kinematics first – a solid foundation for the later study of the free-body formulation of the dynamics problem. A key objective of these volumes, which present a vector treatment of the principles of mechanics, is to help the student gain confidence in transforming problems into appropriate mathematical language that may be manipulated to give useful physical conclusions or specific numerical results. In the first volume, the elements of vector calculus and the matrix algebra are reviewed in appendices. Unusual mathematical topics, such as singularity functions and some elements of tensor analysis, are introduced within the text. A logical and systematic building of well-known kinematic concepts, theorems, and formulas, illustrated by examples and problems, is presented offering insights into both fundamentals and applications. Problems amplify the material and pave the way for advanced study of topics in mechanical design analysis, advanced kinematics of mechanisms and analytical dynamics, mechanical vibrations and controls, and continuum mechanics of solids and fluids. Volume I of Principles of Engineering Mechanics provides the basis for a stimulating and rewarding one-term course for advanced undergraduate and first-year graduate students specializing in mechanics, engineering science, engineering physics, applied mathematics, materials science, and mechanical, aerospace, and civil engineering. Professionals working in related fields of applied mathematics will find it a practical review and a quick reference for questions involving basic kinematics.

Download or read book A Text Book of Applied Mechanics and Mechanical Engineering Volume 2 written by Andrew Jamieson and published by Arkose Press. This book was released on 2015-10-16 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work.This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.

Download or read book Applied Mechanics for Engineering Technology written by Keith M. Walker and published by Pearson. This book was released on 2013-09-17 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: For courses in Applied Mechanics, Statics/Dynamics, or Introduction to Stress Analysis. Featuring a non-calculus approach, this introduction to applied mechanics text combines a straightforward, readable foundation in underlying physics principles with a consistent method of problem solving. It presents the physics principles in small elementary steps; keeps the mathematics at a reasonable level; provides an abundance of worked examples; and features problems that are as practical as possible without becoming too involved with many extraneous details. This edition features 7% more problems, an enhanced layout and design and a logical, disciplined approach that gives students a sound background in core statics and dynamics competencies.

Download or read book Modelling in Engineering 2020 Applied Mechanics written by Arkadiusz Mężyk and published by Springer Nature. This book was released on 2021-02-12 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the outcomes of the 59th Symposium “Modelowanie w Mechanice” (Engineering Modelling in Mechanics) held in Ustroń from 22 February to 26 February 2020. The International Conference has an over 58-year-old history and is organized by the Department of Theoretical and Applied Mechanics of Silesian University of Technology under the patronage of the Polish Society of Theoretical and Applied Mechanics, Gliwice Branch. Subjects of the conference are modelling of mechatronic systems, machinery dynamics, control systems, sensitivity analysis and optimization, numerical modelling and experimental methods in mechanics, biomechanics, heat flow analysis, fluid mechanics, etc. The papers are dealing with interdisciplinary problems in which mechanical phenomena are of decisive importance. The potential reader of this book will find their set of papers concentrated on the use of computer-aided design, virtual modelling, numerical simulations, fast prototyping and experimental tests of mechanical systems. It is an area of versatile and interdisciplinary research trends with one of the mainstreams focusing on applied mechanics.

Download or read book Convex Models of Uncertainty in Applied Mechanics written by Y. Ben-Haim and published by Elsevier. This book was released on 2013-10-22 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recognition of the need to introduce the ideas of uncertainty in a wide variety of scientific fields today reflects in part some of the profound changes in science and engineering over the last decades. Nobody questions the ever-present need for a solid foundation in applied mechanics. Neither does anyone question nowadays the fundamental necessity to recognize that uncertainty exists, to learn to evaluate it rationally, and to incorporate it into design.This volume provides a timely and stimulating overview of the analysis of uncertainty in applied mechanics. It is not just one more rendition of the traditional treatment of the subject, nor is it intended to supplement existing structural engineering books. Its aim is to fill a gap in the existing professional literature by concentrating on the non-probabilistic model of uncertainty. It provides an alternative avenue for the analysis of uncertainty when only a limited amount of information is available. The first chapter briefly reviews probabilistic methods and discusses the sensitivity of the probability of failure to uncertain knowledge of the system. Chapter two discusses the mathematical background of convex modelling. In the remainder of the book, convex modelling is applied to various linear and nonlinear problems. Uncertain phenomena are represented throughout the book by convex sets, and this approach is referred to as convex modelling.This book is intended to inspire researchers in their goal towards further growth and development in this field.