Download or read book Applications of the Theory of Optimal Control of Distributed parameter Systems to Structural Optimization written by Jean-Louis Pierre Armand and published by . This book was released on 1972 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Survey of Optimal Control of Distributed parameter Systems written by Alfred C. Robinson and published by . This book was released on 1969 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report is a survey of theoretical and computational methods in the field of optimal control of distributed parameter systems. This includes systems described by integral equations and partial differential equations. The various studies which have been done are grouped according to the method employed. A number of applications and potential applications of these methods are discussed, and certain deficiencies in the current state of knowledge are noted. Difficulties and opportunities in practical applications are discussed, and suggestions are offered for directions of research to render the results more readily usable. A list of references is included numbering more than 250 items: papers, report, and books.
Download or read book Optimization of Distributed Parameter Structures Volume I written by E.J. Haug and published by Springer. This book was released on 1981-10-31 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain lectures and contributed papers presented at the NATO-NSF Advanced Stucy Institute on Optimization of Distributed Parameter Structures (Iowa City, Iowa 21 May - 4 June, 1980). The institute was organized by E. Haug and J. Cea, with the enthusiastic help of leading contributors to the field of distributed parameter structural optimization. The principle con tributor to this field during the past two decades, Professor William Prager, participated in planning for the Institute and helped to establish its technical direction. His death just prior to the Institute is a deep loss to the community of engineers and mathematicians in the field, to which he made pioneering contri butions. The proceedings are organized into seven parts, each address ing important problems and special considerations involving classes of structural optimization problems. The review paper presented first in the proceedings surveys contributions to the field, primarily during the decade 1970-1980. Part I of the pro ceedings addresses optimality criteria methods for analyzing and solving problems of distributed parameter structural optimization. Optimality criteria obtained using variational methods of mech anics, calculus of variation, optimal control theory, and abstract optimization theory are presented for numerous classes of struct ures; including beams, columns, plates, grids, shells, and arches.
Download or read book Some Aspects of the Optimal Control of Distributed Parameter Systems written by J. L. Lions and published by SIAM. This book was released on 1972-01-01 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: The applications of the theory of Optimal Control of distributed parameters is an extremely wide field and, although a large number of questions remain open, the whole subject continues to expand very rapidly. The author does not attempt to cover the field but does discuss a number of the more interesting areas of application.
Download or read book Applied Optimal Control Theory of Distributed Systems written by K.A. Lurie and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents an extended and substantially revised version of my earlierbook, Optimal Control in Problems ofMathematical Physics,originally published in Russian in 1975. About 60% of the text has been completely revised and major additions have been included which have produced a practically new text. My aim was to modernize the presentation but also to preserve the original results, some of which are little known to a Western reader. The idea of composites, which is the core of the modern theory of optimization, was initiated in the early seventies. The reader will find here its implementation in the problem of optimal conductivity distribution in an MHD-generatorchannel flow.Sincethen it has emergedinto an extensive theory which is undergoing a continuous development. The book does not pretend to be a textbook, neither does it offer a systematic presentation of the theory. Rather, it reflects a concept which I consider as fundamental in the modern approach to optimization of dis tributed systems. Bibliographical notes,though extensive, do not pretend to be exhaustive as well. My thanks are due to ProfessorJean-Louis Armand and ProfessorWolf Stadler whose friendly assistance in translating and polishing the text was so valuable. I am indebted to Mrs. Kathleen Durand and Mrs. Colleen Lewis for the hard job of typing large portions of the manuscript.
Download or read book Optimal Control of Distributed Systems written by A. V. Fursikov and published by American Mathematical Soc.. This book was released on 2000 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the analysis of optimal control problems for systems described by partial differential equations. The book offers simple and clear exposition of main results in this area. The methods proposed by the author cover cases where the controlled system corresponds to well-posed or ill-posed boundary value problems, which can be linear or nonlinear. The uniqueness problem for the solution of nonlinear optimal control problems is analysed in various settings. Solutions of several previously unsolved problems are given. In addition, general methods are applied to the study of two problems connected with optimal control of fluid flows described by the Navier-Stokes equations.
Download or read book Distributed Parameter Systems written by S. Ōmatu and published by Oxford University Press, USA. This book was released on 1989 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this unified account of the mathematical theory of distributed parameter systems (DPS), the authors cover all major aspects of the control, estimation, and identification of such systems, and their application in engineering problems. The first part of the book is devoted to the basic results in deterministic and stochastic partial differential equations, which are applied to the optimal control and estimation theories for DPS. Part two then applies this knowledge in an engineering setting, discussing optimal estimators, optimal sensor and actuator locations, and computational techniques.
Download or read book Applications of Optimal Control Theory to Distributed Parameter Systems written by Sanjay Chawla and published by . This book was released on 1995 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control of Distributed Parameter Systems 1989 written by M. Amouroux and published by Elsevier. This book was released on 2014-06-28 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents state-of-the-art reports on the theory, and current and future applications of control of distributed parameter systems. The papers cover the progress not only in traditional methodology and pure research in control theory, but also the rapid growth of its importance for different applications. This title will be of interest to researchers working in the areas of mathematics, automatic control, computer science and engineering.
Download or read book Optimal Control of Distributed Systems with Conjugation Conditions written by Ivan V. Sergienko and published by Springer Science & Business Media. This book was released on 2005-02-10 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: At present, in order to resolve problems of ecology and to save mineral resources for future population generations, it is quite necessary to know how to maintain nature arrangement in an efficient way. It is possible to achieve a rational nature arrangement when analyzing solutions to problems concerned with optimal control of distributed systems and with optimization of modes in which main ground medium processes are functioning (motion of liquids, generation of temperature fields, mechanical deformation of multicomponent media). Such analysis becomes even more difficult because of heterogeneity of the region that is closest to the Earth surface, and thin inclusions/cracks in it exert their essential influence onto a state and development of the mentioned processes, especially in the cases of mining. Many researchers, for instance, A.N. Tikhonov - A.A. Samarsky [121], L. Luckner - W.M. Shestakow [65], Tien-Mo Shih, K.L. Johnson [47], E. Sanchez-Palencia [94] and others stress that it is necessary to consider how thin inclusions/cracks exert their influences onto development of these processes, while such inclusions differ in characteristics from main media to a considerable extent (moisture permeability, permeability to heat, bulk density or shear strength may be mentioned). Xll An influence exerted from thin interlayers onto examined processes is taken into account sufficiently adequately by means of various constraints, namely, by the conjugation conditions [4, 8, 10, 15, 17-20, 22-26, 38, 44, 47, 52, 53, 68, 76, 77, 81, 83, 84, 90, 95, 96-100, 112-114, 117, 123].
Download or read book Optimal Control of Distributed Parameter Systems written by Nasir Uddin Ahmed and published by New York : North Holland. This book was released on 1981 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control and Estimation in Distributed Parameter Systems written by H. T. Banks and published by SIAM. This book was released on 1992-01-01 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research in control and estimation of distributed parameter systems encompasses a wide range of applications including both fundamental science and emerging technologies. The latter include smart materials (piezoceramics, shape memory alloys, magnetostrictives, electrorheological fluids) fabrication and testing, design of high-pressure chemical vapor deposition (CVD) reactors for production of microelectronic surfaces (e.g., semiconductors), while the former include groundwater contamination cleanup and other environmental modeling questions, climatology, flow control, and fluid-structure interactions as well as more traditional topics in biology, mechanics, and acoustics. These expository papers provide substantial stimulus to both young researchers and experienced investigators in control theory. Includes a comprehensive and lucid presentation that relates frequency domain techniques to state-space or time domain approaches for infinite-dimensional systems including design of robust stabilizing and finite-dimensional controllers for infinite-dimensional systems. It focuses on these two approaches to control design in an integrated system theoretic framework. This is excellent reading for researchers in both the frequency domain and time domain control communities. In other articles, topics considered include pointwise control of distributed parameter systems, bounded and unbounded sensors and actuators, stabilization issues for large flexible structures, and an overview discussion of damping models for flexible structures.
Download or read book Control Theory for Distributed Parameter Systems and Applications written by F. Kappel and published by Springer. This book was released on 1983 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimization of Distributed Parameter Structures written by Edward J. Haug and published by Kluwer Academic Publishers. This book was released on 1981 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Survey of Optimal Control of Distributed parameter Systems written by Alfred C. Robinson and published by . This book was released on 1969 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report is a survey of theoretical and computational methods in the field of optimal control of distributed parameter systems. This includes systems described by integral equations and partial differential equations. The various studies which have been done are grouped according to the method employed. A number of applications and potential applications of these methods are discussed, and certain deficiencies in the current state of knowledge are noted. Difficulties and opportunities in practical applications are discussed, and suggestions are offered for directions of research to render the results more readily usable. A list of references is included numbering more than 250 items: papers, report, and books. (Author).
Download or read book Control and Optimal Design of Distributed Parameter Systems written by John E. Lagnese and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: The articles in this volume focus on control theory of systems governed by nonlinear linear partial differential equations, identification and optimal design of such systems, and modelling of advanced materials. Optimal design of systems governed by PDEs is a relatively new area of study, now particularly relevant because of interest in optimization of fluid flow in domains of variable configuration, advanced and composite materials studies and "smart" materials which include possibilities for built in sensing and control actuation. The book will be of interest to both applied mathematicians and to engineers.
Download or read book Control and Estimation of Distributed Parameter Systems written by Wolfgang Desch and published by Birkhäuser. This book was released on 2012-12-06 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Consisting of 16 refereed original contributions, this volume presents a diversified collection of recent results in control of distributed parameter systems. Topics addressed include - optimal control in fluid mechanics - numerical methods for optimal control of partial differential equations - modeling and control of shells - level set methods - mesh adaptation for parameter estimation problems - shape optimization Advanced graduate students and researchers will find the book an excellent guide to the forefront of control and estimation of distributed parameter systems.
