Download or read book Probabilistic Risk Analysis written by Tim Bedford and published by Cambridge University Press. This book was released on 2001-04-30 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Probabilistic risk analysis aims to quantify the risk caused by high technology installations. Increasingly, such analyses are being applied to a wider class of systems in which problems such as lack of data, complexity of the systems, uncertainty about consequences, make a classical statistical analysis difficult or impossible. The authors discuss the fundamental notion of uncertainty, its relationship with probability, and the limits to the quantification of uncertainty. Drawing on extensive experience in the theory and applications of risk analysis, the authors focus on the conceptual and mathematical foundations underlying the quantification, interpretation and management of risk. They cover standard topics as well as important new subjects such as the use of expert judgement and uncertainty propagation. The relationship of risk analysis with decision making is highlighted in chapters on influence diagrams and decision theory. Finally, the difficulties of choosing metrics to quantify risk, and current regulatory frameworks are discussed.
Download or read book Online Probabilistic Risk Assessment of Complex Marine Systems written by Tarannom Parhizkar and published by Springer Nature. This book was released on 2021-11-26 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proposes a new approach to dynamic and online risk assessment of automated and autonomous marine systems, taking into account different environmental and operational conditions. The book presents lessons learnt from dynamic positioning incidents and accidents, and discusses the challenges of risk assessment of complex systems. The book begins by introducing dynamic and online risk assessment, before presenting automated and autonomous marine systems, as well as numerous dynamic positioning incidents. It then discusses human interactions with technology and explores how to quantify human error. Dynamic probabilistic risk assessment and online risk assessment are both considered fully, including case studies with the application of assisting operators in decision making in emergency situations. Finally, areas for future research are suggested. This practical volume offers tools and methodologies to help operators make better decisions and improve the safety of automated and autonomous marine systems. It provides a guideline for researchers and practitioners to perform dynamic probabilistic and online risk assessment, which also should be applicable to other complex systems outside the marine and maritime domain, such as nuclear power plants, chemical processes, autonomous transport systems, and space shuttles.
Download or read book New Risks Issues and Management written by Louis A. Cox and published by Springer Science & Business Media. This book was released on 1990-09-30 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the 1986 annual meeting and conference of the Society for Risk Analysis. It provides a detailed view of both mature disciplines and emerging areas within the fields of health, safety, and environmental risk analysis as they existed in 1986. In selecting and organizing topics for this conference, we sought both (i) to identify and include new ideas and application areas that would be of lasting interest to risk analysts and to users of risk analysis results, and (ii) to include innovative methods and applications in established areas of risk analysis. In the three years since the conference, many of the topics presented there for the first time to a broad risk analysis audience have become well developed-and sometimes hotly debated-areas of applied risk research. Several, such as the public health hazards from indoor air pollutants, radon in the home, high-voltage electric fields, and the AIDS epidemic, have been the subjects of headlines since 1986. Older areas, such as hazardous waste site ranking and remediation, air emissions dispersion modeling and exposure assessment, transportation safety, seismic and nuclear risk assessment, and occupational safety in the chemical industry, have continued to receive new treatments and to benefit from advances in quantitative risk assessment methods, as documented in the theoretical and methodological papers in this volume. A theme of the meeting was the importance of new technologies and the new and uncertain risks that they create.
Download or read book Bayesian Inference for Probabilistic Risk Assessment written by Dana Kelly and published by Springer Science & Business Media. This book was released on 2011-08-30 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bayesian Inference for Probabilistic Risk Assessment provides a Bayesian foundation for framing probabilistic problems and performing inference on these problems. Inference in the book employs a modern computational approach known as Markov chain Monte Carlo (MCMC). The MCMC approach may be implemented using custom-written routines or existing general purpose commercial or open-source software. This book uses an open-source program called OpenBUGS (commonly referred to as WinBUGS) to solve the inference problems that are described. A powerful feature of OpenBUGS is its automatic selection of an appropriate MCMC sampling scheme for a given problem. The authors provide analysis “building blocks” that can be modified, combined, or used as-is to solve a variety of challenging problems. The MCMC approach used is implemented via textual scripts similar to a macro-type programming language. Accompanying most scripts is a graphical Bayesian network illustrating the elements of the script and the overall inference problem being solved. Bayesian Inference for Probabilistic Risk Assessment also covers the important topics of MCMC convergence and Bayesian model checking. Bayesian Inference for Probabilistic Risk Assessment is aimed at scientists and engineers who perform or review risk analyses. It provides an analytical structure for combining data and information from various sources to generate estimates of the parameters of uncertainty distributions used in risk and reliability models.
Download or read book Probabilistic Risk Assessment in the Nuclear Power Industry written by R. R. Fullwood and published by Pergamon. This book was released on 1988 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a number of the more important improvements in risk assessment methodology in the nuclear industry, developed over the last decade. It presents them in an instructive way so as to be suitable for those wishing to understand the techniques. The methodology of modern probabilistic risk assessment (PRA) is discussed in detail. This book is divided into six parts. Part I, Protecting the Public Health and Safety provides an overview of risk analysis including results presentation, safety goals, emergency planning, and public perception. Part II, the Mathematics, which is necessary to understand the text. Part III, safety Aspects of Light Water Reactors describes the types of plants and goes on to discuss accident initiator selection and frequencies. Part IV, PRA, describes system modelling, human factors analysis, data bases, codes, system interactions, external events, core melt physics, and the transport of radionuclides to the public. Part V discusses 34 types of applications of PRA. Part VI, Resources, provides a glossary, references, and an index. Problems are provided at the end of each part to both stimulate understanding and introduce additional material. This book would be a very valuable addition to the reference library of practitioners in the risk assessment business. It is also a useful instructional text for graduate and undergraduate nuclear engineering students as well as newcomers to the field.
Download or read book Probabilistic Safety Assessment and Management written by Cornelia Spitzer and published by Springer. This book was released on 2014-01-04 with total page 3803 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of papers presented at the PSAM 7 – ESREL ’04 conference in June 2004, reflecting a wide variety of disciplines, such as principles and theory of reliability and risk analysis, systems modelling and simulation, consequence assessment, human and organisational factors, structural reliability methods, software reliability and safety, insights and lessons from risk studies and management/decision making. This volume covers both well-established practices and open issues in these fields, identifying areas where maturity has been reached and those where more development is needed.
Download or read book Risk Assessment written by Marvin Rausand and published by John Wiley & Sons. This book was released on 2020-03-31 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces risk assessment with key theories, proven methods, and state-of-the-art applications Risk Assessment: Theory, Methods, and Applications remains one of the few textbooks to address current risk analysis and risk assessment with an emphasis on the possibility of sudden, major accidents across various areas of practice—from machinery and manufacturing processes to nuclear power plants and transportation systems. Updated to align with ISO 31000 and other amended standards, this all-new 2nd Edition discusses the main ideas and techniques for assessing risk today. The book begins with an introduction of risk analysis, assessment, and management, and includes a new section on the history of risk analysis. It covers hazards and threats, how to measure and evaluate risk, and risk management. It also adds new sections on risk governance and risk-informed decision making; combining accident theories and criteria for evaluating data sources; and subjective probabilities. The risk assessment process is covered, as are how to establish context; planning and preparing; and identification, analysis, and evaluation of risk. Risk Assessment also offers new coverage of safe job analysis and semi-quantitative methods, and it discusses barrier management and HRA methods for offshore application. Finally, it looks at dynamic risk analysis, security and life-cycle use of risk. Serves as a practical and modern guide to the current applications of risk analysis and assessment, supports key standards, and supplements legislation related to risk analysis Updated and revised to align with ISO 31000 Risk Management and other new standards and includes new chapters on security, dynamic risk analysis, as well as life-cycle use of risk analysis Provides in-depth coverage on hazard identification, methodologically outlining the steps for use of checklists, conducting preliminary hazard analysis, and job safety analysis Presents new coverage on the history of risk analysis, criteria for evaluating data sources, risk-informed decision making, subjective probabilities, semi-quantitative methods, and barrier management Contains more applications and examples, new and revised problems throughout, and detailed appendices that outline key terms and acronyms Supplemented with a book companion website containing Solutions to problems, presentation material and an Instructor Manual Risk Assessment: Theory, Methods, and Applications, Second Edition is ideal for courses on risk analysis/risk assessment and systems engineering at the upper-undergraduate and graduate levels. It is also an excellent reference and resource for engineers, researchers, consultants, and practitioners who carry out risk assessment techniques in their everyday work.
Download or read book Probability and Risk Analysis written by Igor Rychlik and published by Springer Science & Business Media. This book was released on 2006-10-07 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents notions and ideas at the foundations of a statistical treatment of risks. The focus is on statistical applications within the field of engineering risk and safety analysis. Coverage includes Bayesian methods. Such knowledge facilitates the understanding of the influence of random phenomena and gives a deeper understanding of the role of probability in risk analysis. The text is written for students who have studied elementary undergraduate courses in engineering mathematics, perhaps including a minor course in statistics. This book differs from typical textbooks in its verbal approach to many explanations and examples.
Download or read book Probabilistic Safety Assessment in the Chemical and Nuclear Industries written by Ralph Fullwood and published by Butterworth-Heinemann. This book was released on 2000 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: In addition to presenting methodology, it shows how to identify accident vulnerability in the two industries. It reviews the causes of the two major nuclear accidents and many fatal accidents in the chemical industry, including Bhopal. Many examples of applications of PSA to both industries are presented."--BOOK JACKET. "Problems are included at the end of many chapters with answers at the back of the book."--Jacket.
Download or read book Advanced Concepts In Nuclear Energy Risk Assessment And Management written by Tunc Aldemir and published by World Scientific. This book was released on 2018-04-25 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past 30 years, numerous concerns have been raised in the literature regarding the capability of static modeling approaches such as the event-tree (ET)/fault-tree (FT) methodology to adequately account for the impact of process/hardware/software/firmware/human interactions on nuclear power plant safety assessment, and methodologies to augment the ET/FT approach have been proposed. Often referred to as dynamic probabilistic risk/safety assessment (DPRA/DPSA) methodologies, which use a time-dependent phenomenological model of system evolution along with a model of its stochastic behavior to model for possible dependencies among failure events. The book contains a collection of papers that describe at existing plant level applicable DPRA/DPSA tools, as well as techniques that can be used to augment the ET/FT approach when needed.
Download or read book Risk informed Methods and Applications in Nuclear and Energy Engineering written by Curtis Smith and published by Academic Press. This book was released on 2023-11-16 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk-informed Methods and Applications in Nuclear and Energy Engineering: Modelling, Experimentation, and Validation presents a comprehensive view of the latest technical approaches and experimental capabilities in nuclear energy engineering. Based on Idaho National Laboratory's popular summer school series, this book compiles a collection of entries on the cutting-edge research and knowledge presented by proponents and developers of current and future nuclear systems, focusing on the connection between modelling and experimental approaches. Included in this book are key topics such as probabilistic concepts for risk analysis, the survey of legacy reliability and risk analysis tools, and newly developed tools supporting dynamic probabilistic risk-assessment. This book is an insightful and inspiring compilation of work from top nuclear experts from INL. Industry professionals, researchers and academics working in nuclear engineering, safety, operations and training will gain a board picture of the current state-of-practice and be able to apply that to their own risk-assessment studies. - Based on Idaho National Laboratory's summer school series, this book is a collection of entries from proponents and developers of current and future nuclear systems - Provides an up-to-date view of current technical approaches and experimental capabilities in nuclear energy engineering, covering modeling and validation, and focusing on risk-informed methods and applications - Equips the reader with an understanding of various case studies and experimental validations to enable them to carry out a risk-assessment study
Download or read book Probablistic Risk Assessment and Management for Engineers and Scientists written by Hiromitsu Kumamoto and published by Wiley-IEEE Press. This book was released on 2000-04-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Engineering Probabilistic Risk Assessment and Management for Engineers and Scientists Second Edition "State of the art in risk analysis...[this book] projects the technology into the next decade. Congratulations to the authors on a virtuoso performance." -Charles Donaghey, University of Houston "A very useful reference to the academic and government communities, and junior engineering staff within nuclear, chemical, transportation, aerospace, and other industries." -Yovan Lukic, Arizona Public Service Company As the demands of government agencies and insurance companies escalate, societal risk assessment and management become increasingly critical to the development and use of engineered systems in the full range of industrial installations. Packed with real-world examples and practical mathematical and statistical methods for large, complex systems, this definitive text and sourcebook gives you the guidance you need for thorough and conclusive study. You'll find new and updated coverage of all the key topics related to risk analysis: * Probabilistic nature of risk * Qualitative and quantitative risk assessments * System decomposition * Legal and regulatory risks * And much more! The authors also provide end-of-chapter problems and a course outline. Complete with a new, automated, fault tree synthesis method using semantic networks. Probabilistic Risk Assessment and Management for Engineers and Scientists, Second Edition will be of value to anyone working with engineered systems. Also of Interest from IEEE Press... Successful Patents and Patenting for Engineers and Scientists edited by Michael A. Lechter, Esq. 1995 Softcover 432 pp IEEE Order No. PP4478 ISBN 0-7803-1086-1 Metric Units and Conversion Charts A Metrication Handbook for Engineers, Technologists, and Scientists Second Edition Theodore Wildi 1995 Softcover 144 pp IEEE Order No. PP4044 ISBN 0-7803-1050-0 The Probability Tutoring Book An Intuitive Course for Engineers and Scientists (And Everyone Else!) Carol Ash 1993 Softcover 480 pp IEEE Order No. PP2881 ISBN 0-7803-1051-9
Download or read book Handbook of Performability Engineering written by Krishna B. Misra and published by Springer Science & Business Media. This book was released on 2008-08-24 with total page 1331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dependability and cost effectiveness are primarily seen as instruments for conducting international trade in the free market environment. These factors cannot be considered in isolation of each other. This handbook considers all aspects of performability engineering. The book provides a holistic view of the entire life cycle of activities of the product, along with the associated cost of environmental preservation at each stage, while maximizing the performance.
Download or read book Risk and Safety Analysis of Nuclear Systems written by John C. Lee and published by John Wiley & Sons. This book was released on 2011-07-05 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book has been developed in conjunction with NERS 462, a course offered every year to seniors and graduate students in the University of Michigan NERS program. The first half of the book covers the principles of risk analysis, the techniques used to develop and update a reliability data base, the reliability of multi-component systems, Markov methods used to analyze the unavailability of systems with repairs, fault trees and event trees used in probabilistic risk assessments (PRAs), and failure modes of systems. All of this material is general enough that it could be used in non-nuclear applications, although there is an emphasis placed on the analysis of nuclear systems. The second half of the book covers the safety analysis of nuclear energy systems, an analysis of major accidents and incidents that occurred in commercial nuclear plants, applications of PRA techniques to the safety analysis of nuclear power plants (focusing on a major PRA study for five nuclear power plants), practical PRA examples, and emerging techniques in the structure of dynamic event trees and fault trees that can provide a more realistic representation of complex sequences of events. The book concludes with a discussion on passive safety features of advanced nuclear energy systems under development and approaches taken for risk-informed regulations for nuclear plants.
Download or read book Risk Assessment written by Lee T. Ostrom and published by John Wiley & Sons. This book was released on 2019-07-09 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guides the reader through a risk assessment and shows them the proper tools to be used at the various steps in the process This brand new edition of one of the most authoritative books on risk assessment adds ten new chapters to its pages to keep readers up to date with the changes in the types of risk that individuals, businesses, and governments are being exposed to today. It leads readers through a risk assessment and shows them the proper tools to be used at various steps in the process. The book also provides readers with a toolbox of techniques that can be used to aid them in analyzing conceptual designs, completed designs, procedures, and operational risk. Risk Assessment: Tools, Techniques, and Their Applications, Second Edition includes expanded case studies and real life examples; coverage on risk assessment software like SAPPHIRE and RAVEN; and end-of-chapter questions for students. Chapters progress from the concept of risk, through the simple risk assessment techniques, and into the more complex techniques. In addition to discussing the techniques, this book presents them in a form that the readers can readily adapt to their particular situation. Each chapter, where applicable, presents the technique discussed in that chapter and demonstrates how it is used. Expands on case studies and real world examples, so that the reader can see complete examples that demonstrate how each of the techniques can be used in analyzing a range of scenarios Includes 10 new chapters, including Bayesian and Monte Carlo Analyses; Hazard and Operability (HAZOP) Analysis; Threat Assessment Techniques; Cyber Risk Assessment; High Risk Technologies; Enterprise Risk Management Techniques Adds end-of-chapter questions for students, and provides a solutions manual for academic adopters Acts as a practical toolkit that can accompany the practitioner as they perform a risk assessment and allows the reader to identify the right assessment for their situation Presents risk assessment techniques in a form that the readers can readily adapt to their particular situation Risk Assessment: Tools, Techniques, and Their Applications, Second Edition is an important book for professionals that make risk-based decisions for their companies in various industries, including the insurance industry, loss control, forensics, all domains of safety, engineering and technical fields, management science, and decision analysis. It is also an excellent standalone textbook for a risk assessment or a risk management course.
Download or read book Uncertainty in Risk Assessment written by Terje Aven and published by John Wiley & Sons. This book was released on 2014-02-03 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores methods for the representation and treatment of uncertainty in risk assessment In providing guidance for practical decision-making situations concerning high-consequence technologies (e.g., nuclear, oil and gas, transport, etc.), the theories and methods studied in Uncertainty in Risk Assessment have wide-ranging applications from engineering and medicine to environmental impacts and natural disasters, security, and financial risk management. The main focus, however, is on engineering applications. While requiring some fundamental background in risk assessment, as well as a basic knowledge of probability theory and statistics, Uncertainty in Risk Assessment can be read profitably by a broad audience of professionals in the field, including researchers and graduate students on courses within risk analysis, statistics, engineering, and the physical sciences. Uncertainty in Risk Assessment: Illustrates the need for seeing beyond probability to represent uncertainties in risk assessment contexts. Provides simple explanations (supported by straightforward numerical examples) of the meaning of different types of probabilities, including interval probabilities, and the fundamentals of possibility theory and evidence theory. Offers guidance on when to use probability and when to use an alternative representation of uncertainty. Presents and discusses methods for the representation and characterization of uncertainty in risk assessment. Uses examples to clearly illustrate ideas and concepts.
Download or read book Risk Analysis in Engineering written by Mohammad Modarres and published by CRC Press. This book was released on 2016-04-27 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the author's 20 years of teaching, Risk Analysis in Engineering: Techniques, Tools, and Trends presents an engineering approach to probabilistic risk analysis (PRA). It emphasizes methods for comprehensive PRA studies, including techniques for risk management. The author assumes little or no prior knowledge of risk analysis on the p
