Download or read book Applications of Fuel Cells in Vehicles written by and published by . This book was released on 2007 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrogen Fuel Cells for Road Vehicles written by Pasquale Corbo and published by Springer Science & Business Media. This book was released on 2011-01-19 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogen Fuel Cells for Road Vehicles addresses the main issues related to the application of hydrogen fuel cell technology in the road transportation sector. A preliminary treatment is given on fuel resources and atmospheric pollution concerns which are closely related to the current technology (internal combustion engine) used for moving people and goods. The authors deal, in particular, with the problems that can hinder a widespread hydrogen market (production, storage and distribution), as well as giving an analysis of fuel cell technologies available for utilization of this energy carrier in the automotive field. Hydrogen Fuel Cells for Road Vehicles also examines the concerns faced during the design and realization of a PEM fuel cell system with optimal size and efficiency, evidencing the impact of the individual auxiliary components on energy losses and dynamic stack performance. The book ends with the analysis of two practical case studies on fuel cell propulsion systems. Hydrogen Fuel Cells for Road Vehicles is a useful text for researchers, professionals and advanced students in the fields of automotive and environmental engineering.
Download or read book Fuel Cells for Automotive Applications written by Rob H. Thring and published by American Society of Mechanical Engineers. This book was released on 2004 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Fuel Cells for Automotive Applications is a valuable addition to the literature available in this important field, where much current information is scattered through web sites, journal papers, and magazine articles. Chapters by experts in the field draws on both academic and industry-related research." "Fuel Cells for Automotive Applications will be welcomed by designers and manufacturers of fuel cell components, the designers of fuel cell systems, vehicle manufacturers, and anyone with an interest in the viability of this developing technology."--BOOK JACKET.
Download or read book Fuel Cells written by Bei Gou and published by CRC Press. This book was released on 2017-12-19 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells: Modeling, Control, and Applications describes advanced research results on modeling and control designs for fuel cells and their hybrid energy systems. Filled with simulation examples and test results, it provides detailed discussions on fuel cell modeling, analysis, and nonlinear control. The book begins with an introduction to fuel cells and fuel cell power systems as well as the fundamentals of fuel cell systems and their components. It then presents the linear and nonlinear modeling of fuel cell dynamics, before discussing typical approaches of linear and nonlinear modeling and control design methods for fuel cells. The authors also explore the Simulink implementation of fuel cells, including the modeling of PEM fuel cells and control designs. They cover the applications of fuel cells in vehicles, utility power systems, stand-alone systems, and hybrid renewable energy systems. The book concludes with the modeling and analysis of hybrid renewable energy systems, which integrate fuel cells, wind power, and solar power. Mathematical preliminaries on linear and nonlinear control are provided in an appendix. With the need for alternative power well established, we are seeing unprecedented research in fuel cell technology. Written by scientists directly involved with the research, this book presents approaches and achievements in the linear and nonlinear modeling and control design of PEM fuel cells.
Download or read book Modern Electric Hybrid Electric and Fuel Cell Vehicles written by Mehrdad Ehsani and published by CRC Press. This book was released on 2004-12-20 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Air quality is deteriorating, the globe is warming, and petroleum resources are decreasing. The most promising solutions for the future involve the development of effective and efficient drive train technologies. This comprehensive volume meets this challenge and opportunity by integrating the wealth of disparate information found in scattered pape
Download or read book PEM Fuel Cells written by Gurbinder Kaur and published by Elsevier. This book was released on 2021-11-16 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: PEM Fuel Cells: Fundamentals, Advanced Technologies, and Practical Application provides a comprehensive introduction to the principles of PEM fuel cell, their working condition and application, and the latest breakthroughs and challenges for fuel cell technology. Each chapter follows a systematic and consistent structure with clear illustrations and diagrams for easy understanding. The opening chapters address the basics of PEM technology; stacking and membrane electrode assembly for PEM, degradation mechanisms of electrocatalysts, platinum dissolution and redeposition, carbon-support corrosion, bipolar plates and carbon nanotubes for the PEM, and gas diffusion layers. Thermodynamics, operating conditions, and electrochemistry address fuel cell efficiency and the fundamental workings of the PEM. Instruments and techniques for testing and diagnosis are then presented alongside practical tests. Dedicated chapters explain how to use MATLAB and COMSOL to conduct simulation and modeling of catalysts, gas diffusion layers, assembly, and membrane. Degradation and failure modes are discussed in detail, providing strategies and protocols for mitigation. High-temperature PEMs are also examined, as are the fundamentals of EIS. Critically, the environmental impact and life cycle of the production and storage of hydrogen are addressed, as are the risk and durability issues of PEMFC technology. Dedicated chapters are presented on the economics and commercialization of PEMFCs, including discussion of installation costs, initial capital costs, and the regulatory frameworks; apart from this, there is a separate chapter on their application to the automotive industry. Finally, future challenges and applications are considered. PEM Fuel Cells: Fundamentals, Advanced Technologies, and Practical Application provides an in-depth and comprehensive reference on every aspect of PEM fuel cells fundamentals, ideal for researchers, graduates, and students. - Presents the fundamentals of PEM fuel cell technology, electrolytes, membranes, modeling, conductivity, recent trends, and future applications - Addresses commercialization, public policy, and the environmental impacts of PEMFC in dedicated chapters - Presents state-of-the-art PEMFC research alongside the underlying concepts
Download or read book Fuel Cells and Hydrogen Production written by Timothy E. Lipman and published by Springer. This book was released on 2018-10-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The expected end of the “oil age” will lead to increasing focus and reliance on alternative energy conversion devices, among which fuel cells have the potential to play an important role. Not only can phosphoric acid and solid oxide fuel cells already efficiently convert today’s fossil fuels, including methane, into electricity, but other types of fuel cells, such as polymer electrolyte membrane fuel cells, have the potential to become the cornerstones of a possible future hydrogen economy. This handbook offers concise yet comprehensive coverage of the current state of fuel cell research and identifies key areas for future investigation. Internationally renowned specialists provide authoritative introductions to a wide variety of fuel cell types and hydrogen production technologies, and discuss materials and components for these systems. Sustainability and marketing considerations are also covered, including comparisons of fuel cells with alternative technologies.
Download or read book Hydrogen and Fuel Cells written by Bent Sørensen and published by Academic Press. This book was released on 2011-11-14 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: A hydrogen economy, in which this one gas provides the source of all energy needs, is often touted as the long-term solution to the environmental and security problems associated with fossil fuels. However, before hydrogen can be used as fuel on a global scale we must establish cost effective means of producing, storing, and distributing the gas, develop cost efficient technologies for converting hydrogen to electricity (e.g. fuel cells), and creating the infrastructure to support all this. Sorensen is the only text available that provides up to date coverage of all these issues at a level appropriate for the technical reader. The book not only describes the "how" and "where" aspects of hydrogen fuels cells usage, but also the obstacles and benefits of its use, as well as the social implications (both economically and environmental). Written by a world-renowned researcher in energy systems, this thoroughly illustrated and cross-referenced book is an excellent reference for researchers, professionals and students in the field of renewable energy. Updated sections on PEM fuel cells, Molten carbonate cells, Solid Oxide cells and Biofuel cells Updated material to reflect the growing commercial acceptance of stationary and portable fuel cell systems, while also recognizing the ongoing research in automotive fuel cell systems A new example of a regional system based on renewable energy sources reflects the growing international attention to uses of renewable energy as part of the energy grid Examples of life cycle analysis of environmental and social impacts
Download or read book Fuel Cells written by Detlef Stolten and published by John Wiley & Sons. This book was released on 2016-05-31 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This ready reference is unique in collating in one scientifically precise and comprehensive handbook the widespread data on what is feasible and realistic in modern fuel cell technology. Edited by one of the leading scientists in this exciting area, the short, uniformly written chapters provide economic data for cost considerations and a full overview of demonstration data, covering such topics as fuel cells for transportation, fuel provision, codes and standards. The result is highly reliable facts and figures for engineers, researchers and decision makers working in the field of fuel cells.
Download or read book Hydrogen Fuel Cell Technology for Mobile Applications written by Felseghi, Raluca Andreea and published by IGI Global. This book was released on 2023-07-03 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, hydrogen is recognized as a non-polluting energy carrier because it does not contribute to global warming if it is produced from renewable sources. Hydrogen, focusing on the fact that hydrogen can be obtained from a wide range of primary energies, is the only secondary vector that lends itself to a wider application on the market. With the development of fuel cells, hydrogen-based energy generation becomes a reality, with hydrogen becoming an energy alternative worldwide. Because hydrogen can be produced from a wide range of primary energies and can be consumed in an increasing number of applications, it will become an energy center just as electricity is today. The world is on a brink of a new era characterized by advanced technologies and new fuels. Hydrogen Fuel Cell Technology for Mobile Applications addresses the use of fuel cell technology for a sustainable future of mobile applications. The book presents the latest state-of-the-art research results and methodologies addressing the top concerns in the area of hydrogen fuel cell technology for mobile applications. Covering topics such as clean transportation, hydrogen safety issues, and performance improvement, this premier reference source is an excellent resource for scientists, fuel cell manufacturers, engineers, students and educators of higher education, researchers, and academicians.
Download or read book Fuel Cells written by Bei Gou and published by CRC Press. This book was released on 2017-12-19 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells: Modeling, Control, and Applications describes advanced research results on modeling and control designs for fuel cells and their hybrid energy systems. Filled with simulation examples and test results, it provides detailed discussions on fuel cell modeling, analysis, and nonlinear control. The book begins with an introduction to fuel cells and fuel cell power systems as well as the fundamentals of fuel cell systems and their components. It then presents the linear and nonlinear modeling of fuel cell dynamics, before discussing typical approaches of linear and nonlinear modeling and control design methods for fuel cells. The authors also explore the Simulink implementation of fuel cells, including the modeling of PEM fuel cells and control designs. They cover the applications of fuel cells in vehicles, utility power systems, stand-alone systems, and hybrid renewable energy systems. The book concludes with the modeling and analysis of hybrid renewable energy systems, which integrate fuel cells, wind power, and solar power. Mathematical preliminaries on linear and nonlinear control are provided in an appendix. With the need for alternative power well established, we are seeing unprecedented research in fuel cell technology. Written by scientists directly involved with the research, this book presents approaches and achievements in the linear and nonlinear modeling and control design of PEM fuel cells.
Download or read book Hydrogen and Fuel Cells written by Bent Sorensen and published by Academic Press. This book was released on 2018-02-10 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a multidisciplinary field such as energy, Hydrogen and Fuel Cells stands out by covering the entire width of hydrogen production and usage technologies, giving detailed descriptions of not just one but the range of very different fuel cells that have been developed or are under development. In one volume, respected experts Bent Sorensen and Giuseppe Spazzafumo provide all the basic scientific theory underlying hydrogen and fuel cell technologies, but at the same time present applications and sustainable integration into society in a way accessible to a broad range of people working in this field, whether in technical, economic or management roles. The third edition reflects both recently emerged technologies and the market penetration of the most promising technologies, and it gives an appraisal of how far fuel cell technology may go in the future, considering current challenges and economic trends. This new edition has updated and expanded content on hydrogen storage and transmission, molten carbonate fuel cells, PEM fuel cells, solid oxide fuel cells, biofuel cells, including microbial fuel cells, applications in transportation and power plants, future scenarios and life-cycle assessment. It is ideal for researchers and professionals in the field of energy, and renewable energy in particular, both in academia and industry. It is also useful to lecturers and graduate students in engineering, physics, and environmental sciences, as well as professionals involved in energy or environmental regulation and policy. - Gain thorough understanding of the science and applications of hydrogen and a range of different fuel cells, including economic and social aspects of the field - Updated sections include hydrogen storage and transportation, biofuel cells, PEM and solid oxide fuel cells, applications in transportation and large scale power generation, and life-cycle assessment
Download or read book Fuel Cell Systems Explained written by Andrew L. Dicks and published by John Wiley & Sons. This book was released on 2018-07-23 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since publication of the first edition of Fuel Cell Systems Explained, three compelling drivers have supported the continuing development of fuel cell technology. These are: the need to maintain energy security in an energy-hungry world, the desire to move towards zero-emission vehicles and power plants, and the mitigation of climate change by lowering of CO2 emissions. New fuel cell materials, enhanced stack performance and increased lifetimes are leading to the emergence of the first truly commercial systems in applications that range from fork-lift trucks to power sources for mobile phone towers. Leading vehicle manufacturers have embraced the use of electric drive-trains and now see hydrogen fuel cells complementing advanced battery technology in zero-emission vehicles. After many decades of laboratory development, a global but fragile fuel cell industry is bringing the first commercial products to market. This thoroughly revised edition includes several new sections devoted to, for example, fuel cell characterisation, improved materials for low-temperature hydrogen and liquid-fuelled systems, and real-world technology implementation. Assuming no prior knowledge of fuel cell technology, the third edition comprehensively brings together all of the key topics encompassed in this diverse field. Practitioners, researchers and students in electrical, power, chemical and automotive engineering will continue to benefit from this essential guide to the principles, design and implementation of fuel cell systems.
Download or read book Fuel Cells written by Bei Gou and published by CRC Press. This book was released on 2016-08-05 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes advanced research results on Modeling and Control designs for Fuel Cells and their hybrid energy systems. Filled with simulation examples and test results, it provides detailed discussions on Fuel Cell Modeling, Analysis, and Nonlinear control. Beginning with an introduction to Fuel Cells and Fuel Cell Power Systems, as well as the fundamentals of Fuel Cell Systems and their components, it then presents the Linear and Nonlinear modeling of Fuel Cell Dynamics. Typical approaches of Linear and Nonlinear Modeling and Control Design methods for Fuel Cells are also discussed. The authors explore the Simulink implementation of Fuel Cells, including the modeling of PEM Fuel Cells and Control Designs. They cover the applications of Fuel cells in vehicles, utility power systems, and stand-alone systems, which integrate Fuel Cells, Wind Power, and Solar Power. Mathematical preliminaries on Linear and Nonlinear Control are provided in an appendix.
Download or read book The Hydrogen Economy written by National Academy of Engineering and published by National Academies Press. This book was released on 2004-09-05 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The announcement of a hydrogen fuel initiative in the President's 2003 State of the Union speech substantially increased interest in the potential for hydrogen to play a major role in the nation's long-term energy future. Prior to that event, DOE asked the National Research Council to examine key technical issues about the hydrogen economy to assist in the development of its hydrogen R&D program. Included in the assessment were the current state of technology; future cost estimates; CO2 emissions; distribution, storage, and end use considerations; and the DOE RD&D program. The report provides an assessment of hydrogen as a fuel in the nation's future energy economy and describes a number of important challenges that must be overcome if it is to make a major energy contribution. Topics covered include the hydrogen end-use technologies, transportation, hydrogen production technologies, and transition issues for hydrogen in vehicles.
Download or read book Hydrogen Fuel Cells written by Michael Frank Hordeski and published by CRC Press. This book was released on 2020-12-17 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The hydrogen car has been proposed as the solution to our oil problems, but how would it work, and what potential problems associated with it? This book addresses these questions and provides specifics about current developments toward a hydrogen-based energy infrastructure. It offers the reader an informed look at the current state of fuel cell power and transportation technology, and where it's headed.
Download or read book Fuel Cell Handbook written by A. J. Appleby and published by Krieger Publishing Company. This book was released on 1993 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt:
