Download or read book Emerging Nanotechnologies for Renewable Energy written by Waqar Ahmed and published by Elsevier. This book was released on 2021-02-16 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging Nanotechnologies for Renewable Energy offers a detailed overview of the benefits and applications of nanotechnology in the renewable energy sector. The book highlights recent work carried out on the emerging role of nanotechnology in renewable energy applications, ranging from photovoltaics, to battery technology and energy from waste. Written by international authors from both industry and academia, the book covers topics including scaling up from laboratory to industrial scale. It is a valuable resource for students at postgraduate and advanced undergraduate levels, researchers in industry and academia, technology leaders, and policy and decision-makers in the energy and engineering sectors. - Offers insights into a wide range of nanoscale technologies for the generation, storage and transfer of energy - Shows how nanotechnology is being used to create new, more environmentally friendly energy solutions - Assesses the challenges involved in scaling up nanotechnology-based energy solutions to an industrial scale

Download or read book Modelling Simulation and Control of Thermal Energy Systems written by Kwang Y. Lee and published by MDPI. This book was released on 2020-11-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Faced with an ever-growing resource scarcity and environmental regulations, the last 30 years have witnessed the rapid development of various renewable power sources, such as wind, tidal, and solar power generation. The variable and uncertain nature of these resources is well-known, while the utilization of power electronic converters presents new challenges for the stability of the power grid. Consequently, various control and operational strategies have been proposed and implemented by the industry and research community, with a growing requirement for flexibility and load regulation placed on conventional thermal power generation. Against this background, the modelling and control of conventional thermal engines, such as those based on diesel and gasoline, are experiencing serious obstacles when facing increasing environmental concerns. Efficient control that can fulfill the requirements of high efficiency, low pollution, and long durability is an emerging requirement. The modelling, simulation, and control of thermal energy systems are key to providing innovative and effective solutions. Through applying detailed dynamic modelling, a thorough understanding of the thermal conversion mechanism(s) can be achieved, based on which advanced control strategies can be designed to improve the performance of the thermal energy system, both in economic and environmental terms. Simulation studies and test beds are also of great significance for these research activities prior to proceeding to field tests. This Special Issue will contribute a practical and comprehensive forum for exchanging novel research ideas or empirical practices that bridge the modelling, simulation, and control of thermal energy systems. Papers that analyze particular aspects of thermal energy systems, involving, for example, conventional power plants, innovative thermal power generation, various thermal engines, thermal energy storage, and fundamental heat transfer management, on the basis of one or more of the following topics, are invited in this Special Issue: • Power plant modelling, simulation, and control; • Thermal engines; • Thermal energy control in building energy systems; • Combined heat and power (CHP) generation; • Thermal energy storage systems; • Improving thermal comfort technologies; • Optimization of complex thermal systems; • Modelling and control of thermal networks; • Thermal management of fuel cell systems; • Thermal control of solar utilization; • Heat pump control; • Heat exchanger control.

Download or read book Handbook of Smart Energy Systems written by Michel Fathi and published by Springer Nature. This book was released on 2023-08-04 with total page 3382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook analyzes and develops methods and models to optimize solutions for energy access (for industry and the general world population alike) in terms of reliability and sustainability. With a focus on improving the performance of energy systems, it brings together state-of-the-art research on reliability enhancement, intelligent development, simulation and optimization, as well as sustainable development of energy systems. It helps energy stakeholders and professionals learn the methodologies needed to improve the reliability of energy supply-and-demand systems, achieve more efficient long-term operations, deal with uncertainties in energy systems, and reduce energy emissions. Highlighting novel models and their applications from leading experts in this important area, this book will appeal to researchers, students, and engineers in the various domains of smart energy systems and encourage them to pursue research and development in this exciting and highly relevant field.

Download or read book Proceedings of the 2nd International Conference on Advanced Surface Enhancement INCASE 2021 written by Yuefan Wei and published by Springer Nature. This book was released on 2021-08-21 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the ‘2nd International Conference on Advanced Surface Enhancement’, INCASE 2021. It comprehensively reviews the state-of-the-arts in surface engineering related techniques and strategies, towards industrialization. The topics include ‘Advances in Surface Engineering’, ‘Surface and sub-surface Characterisation’, ‘Surface Coatings’ and ‘Modeling and Simulation’. With the opportunities and challenges discussed, this book identifies the gaps between research and manufacturing. The innovative ideas presented promote technology adoption in industry, for the future of manufacturing.

Download or read book Thermal Energy written by Yatish T. Shah and published by CRC Press. This book was released on 2018-01-12 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book details sources of thermal energy, methods of capture, and applications. It describes the basics of thermal energy, including measuring thermal energy, laws of thermodynamics that govern its use and transformation, modes of thermal energy, conventional processes, devices and materials, and the methods by which it is transferred. It covers 8 sources of thermal energy: combustion, fusion (solar) fission (nuclear), geothermal, microwave, plasma, waste heat, and thermal energy storage. In each case, the methods of production and capture and its uses are described in detail. It also discusses novel processes and devices used to improve transfer and transformation processes.

Download or read book Thermal Hydraulics Aspects of Liquid Metal Cooled Nuclear Reactors written by Ferry Roelofs and published by Woodhead Publishing. This book was released on 2018-11-30 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Hydraulics Aspects of Liquid Metal cooled Nuclear Reactors is a comprehensive collection of liquid metal thermal hydraulics research and development for nuclear liquid metal reactor applications. A deliverable of the SESAME H2020 project, this book is written by top European experts who discuss topics of note that are supplemented by an international contribution from U.S. partners within the framework of the NEAMS program under the U.S. DOE. This book is a convenient source for students, professionals and academics interested in liquid metal thermal hydraulics in nuclear applications. In addition, it will also help newcomers become familiar with current techniques and knowledge. - Presents the latest information on one of the deliverables of the SESAME H2020 project - Provides an overview on the design and history of liquid metal cooled fast reactors worldwide - Describes the challenges in thermal hydraulics related to the design and safety analysis of liquid metal cooled fast reactors - Includes the codes, methods, correlations, guidelines and limitations for liquid metal fast reactor thermal hydraulic simulations clearly - Discusses state-of-the-art, multi-scale techniques for liquid metal fast reactor thermal hydraulics applications

Download or read book The National Academy of Sciences Decadal Plan for Aeronautics written by United States. Congress. House. Committee on Science. Subcommittee on Space and Aeronautics and published by . This book was released on 2007 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book National Academy of Sciences decadal plan for aeronautics hearings written by and published by DIANE Publishing. This book was released on with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Computational Methods and Experiments in Heat Transfer X written by Bengt Sundén and published by WIT Press. This book was released on 2008-06-19 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: In engineering design and development, reliable and accurate computational methods are requested to replace or complement expensive and time consuming experimental trial and error work. Tremendous advancements have been achieved during recent years due to improved numerical solutions of non-linear partial differential equations and computer developments to achieve efficient and rapid calculations. Nevertheless, to further progress in computational methods will require developments in theoretical and predictive procedures – both basic and innovative – and in applied research. Accurate experimental investigations are needed to validate the numerical calculations. This book contains the edited versions of the papers presented at the Tenth International Conference on Advanced Computational Methods and Experimental Measurements in Heat Transfer and Mass Transfer held in Maribor, Slovenia in July 2008. The objective of this conference series is to provide a forum for presentation and discussion of advanced topics, new approaches and application of advanced computational methods and experimental measurements to heat and mass transfer problems. The contributed papers are grouped in the following appropriate sections to provide better access for readers: Natural and forced convection; Heat exchangers; Advances in computational methods; Heat recovery; Heat transfer; Modelling and experiments.

Download or read book Decadal Survey of Civil Aeronautics written by National Research Council and published by National Academies Press. This book was released on 2006-10-27 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. air transportation system is very important for our economic well-being and national security. The nation is also the global leader in civil and military aeronautics, a position that needs to be maintained to help assure a strong future for the domestic and international air transportation system. Strong action is needed, however, to ensure that leadership role continues. To that end, the Congress and NASA requested the NRC to undertake a decadal survey of civil aeronautics research and technology (R&T) priorities that would help NASA fulfill its responsibility to preserve U.S. leadership in aeronautics technology. This report presents a set of strategic objectives for the next decade of R&T. It provides a set of high-priority R&T challengesâ€"-characterized by five common themesâ€"-for both NASA and non-NASA researchers, and an analysis of key barriers that must be overcome to reach the strategic objectives. The report also notes the importance of synergies between civil aeronautics R&T objectives and those of national security.

Download or read book Handbook of Research on Advancements in Supercritical Fluids Applications for Sustainable Energy Systems written by Chen, Lin and published by IGI Global. This book was released on 2020-08-28 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercritical fluids are increasingly being used in energy conversion and fluid dynamics studies for energy-related systems and applications. These new applications are contributing to both the increase of energy efficiency as well as greenhouse gas reduction. Such research is critical for scientific advancement and industrial innovations that can support environmentally friendly strategies for sustainable energy systems. The Handbook of Research on Advancements in Supercritical Fluids Applications for Sustainable Energy Systems is a comprehensive two-volume reference that covers the most recent and challenging issues and outlooks for the applications and innovations of supercritical fluids. The book first converts basic thermo-dynamic behaviors and “abnormal” properties from a thermophysical aspect, then basic heat transfer and flow properties, recent new findings of its physical aspect and indications, chemical engineering properties, micro-nano-scale phenomena, and transient behaviors in fast and critical environments. It is ideal for engineers, energy companies, environmentalists, researchers, academicians, and students studying supercritical fluids and their applications for creating sustainable energy systems.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Converging Technologies for Improving Human Performance written by Mihail C. Roco and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: M. C. Roco and W.S. Bainbridge In the early decades of the 21st century, concentrated efforts can unify science based on the unity of nature, thereby advancing the combination of nanotechnology, biotechnology, information technology, and new technologies based in cognitive science. With proper attention to ethical issues and societal needs, converging in human abilities, societal technologies could achieve a tremendous improvement outcomes, the nation's productivity, and the quality of life. This is a broad, cross cutting, emerging and timely opportunity of interest to individuals, society and humanity in the long term. The phrase "convergent technologies" refers to the synergistic combination of four major "NBIC" (nano-bio-info-cogno) provinces of science and technology, each of which is currently progressing at a rapid rate: (a) nanoscience and nanotechnology; (b) biotechnology and biomedicine, including genetic engineering; (c) information technology, including advanced computing and communications; (d) cognitive science, including cognitive neuroscience. Timely and Broad Opportunity. Convergence of diverse technologies is based on material unity at the nanoscale and on technology integration from that scale.

Download or read book Basic Research Needs for Advanced Nuclear Energy Systems written by and published by . This book was released on 2006 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Clean Energy Systems 6 Volume Set written by Jinyue Yan and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 4038 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Clean Energy Systems brings together an international team of experts to present a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems. Consolidating information which is currently scattered across a wide variety of literature sources, the handbook covers a broad range of topics in this interdisciplinary research field including both fossil and renewable energy systems. The development of intelligent energy systems for efficient energy processes and mitigation technologies for the reduction of environmental pollutants is explored in depth, and environmental, social and economic impacts are also addressed. Topics covered include: Volume 1 - Renewable Energy: Biomass resources and biofuel production; Bioenergy Utilization; Solar Energy; Wind Energy; Geothermal Energy; Tidal Energy. Volume 2 - Clean Energy Conversion Technologies: Steam/Vapor Power Generation; Gas Turbines Power Generation; Reciprocating Engines; Fuel Cells; Cogeneration and Polygeneration. Volume 3 - Mitigation Technologies: Carbon Capture; Negative Emissions System; Carbon Transportation; Carbon Storage; Emission Mitigation Technologies; Efficiency Improvements and Waste Management; Waste to Energy. Volume 4 - Intelligent Energy Systems: Future Electricity Markets; Diagnostic and Control of Energy Systems; New Electric Transmission Systems; Smart Grid and Modern Electrical Systems; Energy Efficiency of Municipal Energy Systems; Energy Efficiency of Industrial Energy Systems; Consumer Behaviors; Load Control and Management; Electric Car and Hybrid Car; Energy Efficiency Improvement. Volume 5 - Energy Storage: Thermal Energy Storage; Chemical Storage; Mechanical Storage; Electrochemical Storage; Integrated Storage Systems. Volume 6 - Sustainability of Energy Systems: Sustainability Indicators, Evaluation Criteria, and Reporting; Regulation and Policy; Finance and Investment; Emission Trading; Modeling and Analysis of Energy Systems; Energy vs. Development; Low Carbon Economy; Energy Efficiencies and Emission Reduction. Key features: Comprising over 3,500 pages in 6 volumes, HCES presents a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems, consolidating a wealth of information which is currently scattered across a wide variety of literature sources. In addition to renewable energy systems, HCES also covers processes for the efficient and clean conversion of traditional fuels such as coal, oil and gas, energy storage systems, mitigation technologies for the reduction of environmental pollutants, and the development of intelligent energy systems. Environmental, social and economic impacts of energy systems are also addressed in depth. Published in full colour throughout. Fully indexed with cross referencing within and between all six volumes. Edited by leading researchers from academia and industry who are internationally renowned and active in their respective fields. Published in print and online. The online version is a single publication (i.e. no updates), available for one-time purchase or through annual subscription.

Download or read book Energy and Water Development Appropriations for 2011 Part 3 February 2010 111 2 Hearings written by and published by . This book was released on 2010 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy and Water Development Appropriations for 2011 Dept of Energy fiscal year 2011 justifications cont written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 2010 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt: