Download or read book Application of Taguchi Based Design of Experiments for Industrial Chemical Processes written by Rahul Davis and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of experiment is the method, which is used at a very large scale to study the experimentations of industrial processes. It is a statically approach where we develop the mathematical models through experimental trial runs to predict the possible output on the basis of the given input data or parameters. The aim of this chapter is to stimulate the engineering community to apply Taguchi technique to experimentation, the design of experiments, and to tackle quality problems in industrial chemical processes that they deal with. Based on years of research and applications, Dr. G. Taguchi has standardized the methods for each of these DOE application steps. Thus, DOE using Taguchi approach has become a much more attractive tool to practicing engineers and scientists. And since the last four decades, there were limitations when conventional experimental design techniques were applied to industrial experimentation. And Taguchi, also known as orthogonal array design, adds a new dimension to conventional experimental design. Taguchi method is a broadly accepted method of DOE, which has proven in producing high-quality products at subsequently low cost.

Download or read book Statistical Approaches With Emphasis on Design of Experiments Applied to Chemical Processes written by Valter Silva and published by BoD – Books on Demand. This book was released on 2018-03-07 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimized operating conditions for complex systems can be attained by using advanced combinations of numerical and statistical methodologies. One of the most efficient and straightforward solutions relies on the application of statistical methods with an emphasis on the design of experiments (DoEs). Throughout the book, the design and analysis of experiments are conducted involving several approaches, namely, Taguchi, response surface methods, statistical correlations, or even fractional factorial and model-based evolutionary operation designs. This book not only presents a theoretical overview about the different approaches but also contains material that covers the use of the experimental analysis applied to several chemical processes. Some chapters highlight the use of software products to assist experimenters in both the design and analysis stages. It helps graduate students, teachers, researchers, and other professionals who are interested in chemical process optimization and also provides a good basis of theoretical knowledge and valuable insights into the technical details of these tools as well as explains common pitfalls to avoid. The world's leading pharmaceutical companies and local governments are trying to achieve their eradication.

Download or read book A Primer on the Taguchi Method Second Edition written by Ranjit K. Roy and published by Society of Manufacturing Engineers. This book was released on 2010 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the completely revised second edition, additional chapters and more case studies add to the clear, simple, and essentially non-mathematical presentation of the basic concepts, techniques, and applications of the renowned Taguchi approach. This practical guide introduces the fundamentals of Taguchi experimental design and shows engineers how to design, analyze, and interpret experiments for a wide range of common products and processes. What Readers Are Saying "...a clear, step-by-step guide to the Taguchi design of experiments method. The careful descriptions, calculations, and examples demonstrate the versatility of these practical and powerful tools." —Fred Schenkelberg, Consultant, FMS Reliability, Los Gatos, California "Dr. Roy presents the theory and relates it to practical examples, explaining difficult concepts in an understandable manner. This is an easy-to-read, right-on-the-mark guide to understanding and applying Taguchi robust design and DOE. Readers will find these techniques extremely useful, practical, and easily applied to the daily job." —George Li, Process Improvement Manager, Research in Motion, Waterloo, Ontario, Canada "The book has a detailed discussion of Taguchi methods that are not covered in great detail in many books on DOE." —Frederick H. Long, President, Spectroscopic Solutions, LLC, Randolph, New Jersey "Dr. Roy's name is instantly associated with Taguchi methodologies in the manufacturing industries. His skill set is also being recognized for project management instruction. The new edition includes more easy-to-follow descriptions and examples." —Andrea Stamps, Engineering Specialist, Six Sigma Master Black Belt, General Dynamics, Southfield, Michigan "Research engineers, process development engineers, pilot plant engineers, design engineers, national research labs and academic research laboratories should use this book extensively. It's a practical textbook on how to maximize output with minimal use of resources." —Dr. Naresh Mahamuni, Research Associate, North Carolina A&T University, Greensboro, North Carolina "Dr. Roy has many years of practical experience helping engineers understand and improve their engineering, reliability, and problem-solving skills using Dr. Taguchi's ideas. He anticipates questions engineers would ask and provides information exactly when it is needed." —Larry R. Smith, Quality and Reliability Manager (retired), Ford Motor Co., Dearborn, Michigan "A large number of examples support the contents. Case studies are enumerated, which is a strength of the book." —Dr. Pradeep Kumar, Professor and Head, Dept. of Mechanical and Industrial Engineering, IIT Roorkee, Uttarakhand, India "Dr. Roy's book lists many application examples that can help engineers use the Taguchi method effectively." —Dr. Side Zhao, Control Engineer, NACCO Materials Handling Group, Portland, Oregon "The author's experience on the topic is what makes this book very useful as a principal reference in teaching the Taguchi method in quality engineering." —Dr. Carlos Diaz Ramos, Research Professor, Instituto Tecnologico de Orizaba and Universidad Veracruzana, Mexico "The author is able to explain concepts in a very knowledgeable yet down-to-earth and systematic manner. The material is very well organized." —Kush Shah, Manager, Alternative Propulsion Technology Quality, General Motors, LLC, Pontiac, Michigan "This book is a valuable introductory text in Taguchi methods with a number of illustrative examples and case studies that make the concepts clearer than books with theory only." —Dr. R. Mahalinga Iyer, Senior Lecturer, Queensland University of Technology, Brisbane, Queensland, Australia.

Download or read book Design of Experiments for Chemical Pharmaceutical Food and Industrial Applications written by Carrillo-Cedillo, Eugenia Gabriela and published by IGI Global. This book was released on 2019-12-13 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Statistics is a key characteristic that assists a wide variety of professions including business, government, and factual sciences. Companies need data calculation to make informed decisions that help maintain their relevance. Design of experiments (DOE) is a set of active techniques that provides a more efficient approach for industries to test their processes and form effective conclusions. Experimental design can be implemented into multiple professions, and it is a necessity to promote applicable research on this up-and-coming method. Design of Experiments for Chemical, Pharmaceutical, Food, and Industrial Applications is a pivotal reference source that seeks to increase the use of design of experiments to optimize and improve analytical methods and productive processes in order to use less resources and time. While highlighting topics such as multivariate methods, factorial experiments, and pharmaceutical research, this publication is ideally designed for industrial designers, research scientists, chemical engineers, managers, academicians, and students seeking current research on advanced and multivariate statistics.

Download or read book Living Without Mathematical Statistics written by Herbert Ruefer and published by Springer. This book was released on 2018-09-28 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: The underlying principles invented and developed by Dr. Genichi Taguchi (1924 - 2012), for the design of experiments or simulation calculations in multi-parameter systems, are today known as Taguchi Method. Due to the great success, it was extended to many other areas. The book explains the basics of this method in as much detail as necessary and as simply and graphically as possible. The author shows how broad the current application spectrum is and for which different tasks it can be used. The application examples range from optimizing a fermentation process in biotechnology to minimizing costs in mechanical production and maintaining and improving competitiveness in industrial production. The processes described are ideally suited to finding reliable and precise solutions for a wide variety of problems relatively quickly. A real competitive advantage not only in research but also for companies that want to remain competitive in international business competition. Contents Part 1: Analysis of Variables Part 2: Pattern Recognition and Diagnosis Part 3: Prognosis Target groups Students, scientists, engineers or those responsible for development and products learn to use the Taguchi Method with this book - even without any previous mathematical-statistical knowledge. The author Herbert Ruefer studied physics and obtained his doctorate at the Technical University Karlsruhe, Germany. After a research stay at IBM, San Jose, California, he taught at the San Marcos National University in Lima, Peru. He then took on research, development, and training tasks in the chemical industry in Germany. During this time, the first personal contacts with Dr. Genichi Taguchi and Dr. Yuin Wu took place. After his active professional life, he dedicated himself to special optical methods for astronomical observations. He also lectures at the Universidad Nacional Mayor de San Marcos which awarded him an honorary doctorate in 2017.

Download or read book Design of Experiments Using The Taguchi Approach written by Ranjit K. Roy and published by John Wiley & Sons. This book was released on 2001-02-13 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fulfill the practical potential of DOE-with a powerful, 16-step approach for applying the Taguchi method Over the past decade, Design of Experiments (DOE) has undergone great advances through the work of the Japanese management guru Genechi Taguchi. Yet, until now, books on the Taguchi method have been steeped in theory and complicated statistical analysis. Now this trailblazing work translates the Taguchi method into an easy-to-implement 16-step system. Based on Ranjit Roy's successful Taguchi training course, this extensively illustrated book/CD-ROM package gives readers the knowledge and skills necessary to understand and apply the Taguchi method to engineering projects-from theory and applications to hands-on analysis of the data. It is suitable for managers and technicians without a college-level engineering or statistical background, and its self-study pace-with exercises included in each chapter-helps readers start using Taguchi DOE tools on the job quickly. Special features include: * An accompanying CD-ROM of Qualitek-4 software, which performs calculations and features all example experiments described in the book * Problem-solving exercises relevant to actual engineering situations, with solutions included at the end of the text * Coverage of two-, three-, and four-level factors, analysis of variance, robust designs, combination designs, and more Engineers and technical personnel working in process and product design-as well as other professionals interested in the Taguchi method-will find this book/CD-ROM a tremendously important and useful asset for making the most of DOE in their work.

Download or read book Design of Experiments for Engineers and Scientists written by Jiju Antony and published by Elsevier. This book was released on 2023-06-02 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of Design of Experiments for Engineers and Scientists adds to the tried and trusted tools that were successful in so many engineering organizations with new coverage of design of experiments (DoE) in the service sector. Case studies are updated throughout, and new ones are added on dentistry, higher education, and utilities. Although many books have been written on DoE for statisticians, this book overcomes the challenges a wider audience faces in using statistics by using easy-to-read graphical tools. Readers will find the concepts in this book both familiar and easy to understand, and users will soon be able to apply them in their work or research. This classic book is essential reading for engineers and scientists from all disciplines tackling all kinds of product and process quality problems and will be an ideal resource for students of this topic. Written in nonstatistical language, the book is an essential and accessible text for scientists and engineers who want to learn how to use DoE Explains why teaching DoE techniques in the improvement phase of Six Sigma is an important part of problem-solving methodology New edition includes two new chapters on DoE for services as well as case studies illustrating its wider application in the service industry

Download or read book Quality Control written by Pengzhong Li and published by BoD – Books on Demand. This book was released on 2021-03-24 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality control is changing along with the manufacturing environment. A series of revolutionary changes will occur in management contents, methods, capabilities, and real-time effectiveness and efficiency of management. As an essential factor in intelligent manufacturing, quality control systems require real and comprehensive innovation. Focused on new trends and developments in quality control from a worldwide perspective, this book presents the latest information on novel approaches in quality control. Its thirteen chapters cover three topics: intelligent manufacturing, robust design, and control charts.

Download or read book Proceedings of the 2nd International Conference on Experimental and Computational Mechanics in Engineering written by Akhyar and published by Springer Nature. This book was released on 2021-05-31 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers a selection of peer-reviewed papers presented at the 2nd International Conference on Experimental and Computational Mechanics in Engineering (ICECME 2020), held as a virtual conference and organized by Universitas Syiah Kuala, Banda Aceh, Indonesia, on 13–14 October 2020. The contributions, prepared by international scientists and engineers, cover the latest advances in computational mechanics, metallurgy and material science, energy systems, manufacturing processing systems, industrial and system engineering, biomechanics, artificial intelligence, micro/nano-engineering, micro-electro-mechanical system, machine learning, mechatronics, and engineering design. The book is intended for academics, including graduate students and researchers, as well as industrial practitioners working in the areas of experimental and computational mechanics.

Download or read book Engineering Methods for Robust Product Design written by William Y. Fowlkes and published by Prentice Hall. This book was released on 2012-12-09 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: "I believe this book will help a great deal to clarify misconceptions about Dr. Genichi Taguchi's approach to robust design, such as why dynamic signal-to-noise ratio is used and the role of orthogonal arrays in parameter design and tolerance design. The authors understand the intent of robust design is to prevent fire instead of becoming better fire fighters!" Ñ Shin Taguchi President, American Supplier Institute With practical techniques, real-life examples, and special software, this hands-on book/disk package teaches practicing engineers and students how to use Taguchi Methods and other robust design techniques that focus on engineering processes in optimizing technology and products for better performance under the imperfect conditions of the real world. The unique WinRobust Lite software included with the book, together with a number of practice problems, enables you to conduct and analyze Taguchi experiments by simplifying the tedious process of performing the many necessary computations. The book contains complete information on the process of engineering robust products that are insensitive to sources of variability in manufacturing and customer use. You will find detailed instructions for planning, designing, conducting, and analyzing the experiments that are used to optimize a product's performance under a variety of "stressed" conditions. An entire section focuses on designing products that achieve additivity, the property that reduces negative interactions. In addition, the book offers a systematic method for optimizing cost, quality, and cycle time. It even discusses the relationship of robust design to such other quality processes as Quality Function Deployment and Six Sigma. Numerous case studies, taken from the authors' extensive practical experience, illustrate how robust design theories and techniques actually work in the real world of product engineering. With the techniques described in this book as well as the WinRobust Lite software, you will be better able to design robust products that are high-quality, durable, and able to perform well in the marketplace.

Download or read book Design of Experiments written by Messias Borges Silva and published by BoD – Books on Demand. This book was released on 2013-06-26 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a research publication that covers original research on developments within the Design of Experiments - Applications field of study. The book is a collection of reviewed scholarly contributions written by different authors and edited by Dr. Messias Borges Silva. Each scholarly contribution represents a chapter and each chapter is complete in itself but related to the major topics and objectives. The target audience comprises scholars and specialists in the field.

Download or read book Advanced Multiresponse Process Optimisation written by Tatjana V. Šibalija and published by Springer. This book was released on 2015-07-25 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an intelligent, integrated, problem-independent method for multiresponse process optimization. In contrast to traditional approaches, the idea of this method is to provide a unique model for the optimization of various processes, without imposition of assumptions relating to the type of process, the type and number of process parameters and responses, or interdependences among them. The presented method for experimental design of processes with multiple correlated responses is composed of three modules: an expert system that selects the experimental plan based on the orthogonal arrays; the factor effects approach, which performs processing of experimental data based on Taguchi’s quality loss function and multivariate statistical methods; and process modeling and optimization based on artificial neural networks and metaheuristic optimization algorithms. The implementation is demonstrated using four case studies relating to high-tech industries and advanced, non-conventional processes.

Download or read book Advances in Manufacturing Processes Intelligent Methods and Systems in Production Engineering written by Andre Batako and published by Springer Nature. This book was released on 2022-04-19 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book forms an excellent basis for the development of intelligent manufacturing system for Industry 4.0, digital and distributed manufacturing, and factories for future. This book of new developments and advancement in intelligent control and optimization system for production engineering serves as a good companion to scholars, manufacturing companies, and RTO to improve the efficiency of production systems.

Download or read book Emerging Research in Computing Information Communication and Applications written by N. R. Shetty and published by Springer Nature. This book was released on 2022-12-12 with total page 1028 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the International Conference on Emerging Research in Computing, Information, Communication and Applications, ERCICA 2022. The conference provides an interdisciplinary forum for researchers, professional engineers and scientists, educators, and technologists to discuss, debate, and promote research and technology in the upcoming areas of computing, information, communication, and their applications. The book discusses these emerging research areas, providing a valuable resource for researchers and practicing engineers alike.

Download or read book Constraint Handling in Metaheuristics and Applications written by Anand J. Kulkarni and published by Springer Nature. This book was released on 2021-04-12 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to discuss the core and underlying principles and analysis of the different constraint handling approaches. The main emphasis of the book is on providing an enriched literature on mathematical modelling of the test as well as real-world problems with constraints, and further development of generalized constraint handling techniques. These techniques may be incorporated in suitable metaheuristics providing a solid optimized solution to the problems and applications being addressed. The book comprises original contributions with an aim to develop and discuss generalized constraint handling approaches/techniques for the metaheuristics and/or the applications being addressed. A variety of novel as well as modified and hybridized techniques have been discussed in the book. The conceptual as well as the mathematical level in all the chapters is well within the grasp of the scientists as well as the undergraduate and graduate students from the engineering and computer science streams. The reader is encouraged to have basic knowledge of probability and mathematical analysis and optimization. The book also provides critical review of the contemporary constraint handling approaches. The contributions of the book may further help to explore new avenues leading towards multidisciplinary research discussions. This book is a complete reference for engineers, scientists, and students studying/working in the optimization, artificial intelligence (AI), or computational intelligence arena.

Download or read book Experimental Quality written by Jiju Antony and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improving the quality of products and manufacturing processes at low cost is an economic and technological challenge to industrial engineers and managers alike. In today's business world, the implementation of experimental design techniques often falls short of the mark due to a lack of statistical knowledge on the part of engineers and managers in their analyses of manufacturing process quality problems. This timely book aims to fill this gap in the statistical knowledge required by engineers to solve manufacturing quality problems by using Taguchi experimental design methodology. The book increases awareness of strategic methodology through real-life case studies, providing valuable information for both academics and professionals with no prior knowledge of the theory of probability and statistics. Experimental Quality: Provides a unique framework to help engineers and managers address quality problems and use strategic design methodology. Offers detailed case studies illustrating the implementation of experimental design theory. Is easily accessible without prior knowledge or understanding of probability and statistics. This book provides an excellent resource for both academic and industrial environments, and will prove invaluable to practising industrial engineers, quality engineers and engineering managers from all disciplines.

Download or read book Design of Experiments in Chemical Engineering written by Zivorad R. Lazic and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: While existing books related to DOE are focused either on process or mixture factors or analyze specific tools from DOE science, this text is structured both horizontally and vertically, covering the three most common objectives of any experimental research: * screening designs * mathematical modeling, and * optimization. Written in a simple and lively manner and backed by current chemical product studies from all around the world, the book elucidates basic concepts of statistical methods, experiment design and optimization techniques as applied to chemistry and chemical engineering. Throughout, the focus is on unifying the theory and methodology of optimization with well-known statistical and experimental methods. The author draws on his own experience in research and development, resulting in a work that will assist students, scientists and engineers in using the concepts covered here in seeking optimum conditions for a chemical system or process. With 441 tables, 250 diagrams, as well as 200 examples drawn from current chemical product studies, this is an invaluable and convenient source of information for all those involved in process optimization.