Download or read book Handbook of Research on Design and Management of Lean Production Systems written by Modrák, Vladimír and published by IGI Global. This book was released on 2014-01-31 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book explores the recent advancements in the areas of lean production, management, and the system and layout design for manufacturing environments, capturing the building blocks of lean transformation on a shop floor level"--

Download or read book Organizational Change through Lean Methodologies written by A. Heri Iswanto and published by CRC Press. This book was released on 2020-11-11 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lean is a type of organizational change brought about through improvement methods based on cost reduction mechanism. The assumption is that by reducing costs, the organizations can work better and more efficiently. All changes in lean-based organizations are directed at reducing these costs by identifying and eliminating waste. The thinking is that cost reduction will increase efficiency since, basically, it removes process inefficiencies and decreases cycle time. Why are targets directed at cost reduction? Because costs are a crucial factor for sustainable business organization. Lean thinking cuts the value of scale production by looking at the existing waste in a process. Production remains the same, but the costs of goods production are reduced due to the elimination of waste in the process. As a result, companies do not have to increase their production if it is not required, giving companies an increase in average profits due to lean and the elimination of identified waste. The focus on cost reduction can be included in the overall lean concept since cost wasting is only a part of the existing waste. In other words, other waste can be converted into costs or perceived as a value. This book starts the mental process of organization change through lean thinking. It provides the background and history of lean, and then gets into how the lean process works. The author also discusses why an organization should implement lean as a method to increase quality and engage workers in the process, thereby increasing efficiency and, ultimately, profitability. Through case studies and examples from Indonesia, the author describes how to create a value stream to identify waste and discusses the concept of a pull system and its impact on the process.

Download or read book Sustainability in Construction Engineering written by Edmundas Kazimieras Zavadskas and published by MDPI. This book was released on 2018-09-20 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Sustainability in Construction Engineering" that was published in Sustainability

Download or read book Application of Optimization in Production Logistics Inventory Supply Chain Management and Block Chain written by Biswajit Sarkar and published by MDPI. This book was released on 2020-04-23 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: The evolution of industrial development since the 18th century is now experiencing the fourth industrial revolution. The effect of the development has propagated into almost every sector of the industry. From inventory to the circular economy, the effectiveness of technology has been fruitful for industry. The recent trends in research, with new ideas and methodologies, are included in this book. Several new ideas and business strategies are developed in the area of the supply chain management, logistics, optimization, and forecasting for the improvement of the economy of the society and the environment. The proposed technologies and ideas are either novel or help modify several other new ideas. Different real life problems with different dimensions are discussed in the book so that readers may connect with the recent issues in society and industry. The collection of the articles provides a glimpse into the new research trends in technology, business, and the environment.

Download or read book Handbook of Production Scheduling written by Jeffrey W. Herrmann and published by Springer Science & Business Media. This book was released on 2006-08-18 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concentrates on real-world production scheduling in factories and industrial settings. It includes industry case studies that use innovative techniques as well as academic research results that can be used to improve production scheduling. Its purpose is to present scheduling principles, advanced tools, and examples of innovative scheduling systems to persons who could use this information to improve their own production scheduling.

Download or read book Advances in Production Management Systems The Path to Intelligent Collaborative and Sustainable Manufacturing written by Hermann Lödding and published by Springer. This book was released on 2017-08-28 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set IFIP AICT 513 and 514 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2017, held in Hamburg, Germany, in September 2017. The 121 revised full papers presented were carefully reviewed and selected from 163 submissions. They are organized in the following topical sections: smart manufacturing system characterization; product and asset life cycle management in smart factories of industry 4.0; cyber-physical (IIoT) technology deployments in smart manufacturing systems; multi-disciplinary collaboration in the development of smart product-service solutions; sustainable human integration in cyber-physical systems: the operator 4.0; intelligent diagnostics and maintenance solutions; operations planning, scheduling and control; supply chain design; production management in food supply chains; factory planning; industrial and other services; operations management in engineer-to-order manufacturing; gamification of complex systems design development; lean and green manufacturing; and eco-efficiency in manufacturing operations.

Download or read book Stochastic Modeling of Manufacturing Systems written by George Liberopoulos and published by Springer Science & Business Media. This book was released on 2005-12-12 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing systems rarely perform exactly as expected and predicted. Unexpected events, such as order changes, equipment failures and product defects, affect the performance of the system and complicate decision-making. This volume is devoted to the development of analytical methods aiming at responding to variability in a way that limits its corrupting effects on system performance. The book includes fifteen novel chapters that mostly focus on the development and analysis of performance evaluation models of manufacturing systems using decomposition-based methods, Markovian and queuing analysis, simulation, and inventory control approaches. They are organized into four distinct sections to reflect their shared viewpoints: factory design, unreliable production lines, queuing network models, production planning and assembly.

Download or read book Computer Control Abstracts written by and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Michael F. Zaeh and published by Springer. This book was released on 2013-11-27 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2013) is "Enabling Manufacturing Competitiveness and Economic Sustainability. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems' economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability, scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented. About the Editor Prof. Dr.-Ing. Michael F. Zaeh, born in 1963, has been and is Professor for and Manufacturing Technology since 2002 and, together with Prof. Dr.-Ing. Gunther Reinhart, Head of the Institute for Machine Tools and Industrial Management (iwb) at the Technische Universitaet Muenchen (TUM). After studying general mechanical engineering, he was doctoral candidate under Prof. Dr.-Ing. Joachim Milberg at TUM from 1990 until 1993 and received his doctorate in 1993. From 1994 to 1995, he was department leader under Prof. Dr.-Ing. Gunther Reinhart. From 1996 to 2002, he worked for a machine tool manufacturer in several positions, most recently as a member of the extended management. Prof. Dr.-Ing. Michael F. Zaeh is an associated member of the CIRP and member of acatech, WGP and WLP. His current researches include among others Joining and Cutting Technologies like Laser Cutting and Welding as well as Friction Stir Welding, Structural Behaviour and Energy Efficiency of Machine Tools and Manufacturing Processes like Additive Manufacturing.

Download or read book Handbook of Production Management Methods written by Gideon Halevi and published by Elsevier. This book was released on 2001-10-22 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book provides a guide to the selection of appropriate production and manufacturing methods for postgraduate and professional manufacturing engineers. It starts by helping the reader to identify the required objectives of industrial management for their particular situation. Having identified the objectives an analytical assessment of the available production and management methods is made. The analytical system presents an objective method of production selection. For example, this practical book will help the reader to decide whether or not a local Just-in-Time process is needed or a full chain JIT method is needed. Alternatively the problem may be deciding between set-up time reduction or changeover time reduction. Should TQM be ceded to PCIs? This book covers nearly all methods of production and manufacturing and will prove the most comprehensive guide to choosing and using these methods. - Only book of its kind available - Widest coverage of methods available - Analytical approach to decision making

Download or read book Changeable and Reconfigurable Manufacturing Systems written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2008-11-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Changeable and Reconfigurable Manufacturing Systems” discusses key strategies for success in the changing manufacturing environment. Changes can often be anticipated but some go beyond the design range, requiring innovative change enablers and adaptation mechanisms. The book presents the new concept of Changeability as an umbrella framework that encompasses paradigms such as agility, adaptability, flexibility and reconfigurability. It provides the definitions and classification of key terms in this new field, and emphasizes the required physical/hard and logical/soft change enablers. The book presents cutting edge technologies and the latest research, as well as future directions to help manufacturers stay competitive. It contains original contributions and results from senior international experts, together with industrial applications. The book serves as a comprehensive reference for professional engineers, managers, and academics in manufacturing, industrial and mechanical engineering.

Download or read book Reinventing Lean written by Gerhard Plenert and published by Elsevier. This book was released on 2010-07-26 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most books on Supply Chain Management simply focus on how to move materials and key resources throughout an industrial enterprise. Reinventing Lean shows how SCM can be made "Lean, leading to much more reliable, cost-effective and competitive Supply Chain Management (SCM). In this book, the reader will find a collection of management tools that will help to implement Lean principles, and to understand the components of an integrated Supply Chain Management system. Moreover, the book will show that to make Lean SCM effective, both the functional management tools as well as an enterprise-wide cultural readiness are needed in order to lay the groundwork for a World Class Lean Supply Chain. Reinventing Lean will carefully lead engineers and manufacturing managers on how to adopt a cutting-edge Lean Supply Chain strategy. The book will lay out various proven approaches to incorporating Lean and SCM practices, by focusing on the ways in which SCM relates to materials, money, and information movement within the manufacturing environment. And because Reinventing Lean recognizes that a successful Lean SCM system cannot be achieved unless an organization supports team integration and the willingness to adapt to change, it provides not only the technical tools but also methods for changing company cultural factors that can make it all come together for a successful operation. - Industrial engineers and plant managers, with strong backgrounds in SCM, will learn how lean management principles can be utilized to make their organizations leaner, more efficient, and more competitive - Readers will find out how to lay out various approaches to incorporating Lean and SCM practices - Readers can learn how to customize a cutting-edge Lean Supply Chain strategy which will give a distinct advantage over the competition

Download or read book Information Technology for Balanced Manufacturing Systems written by Weiming Shen and published by Springer Science & Business Media. This book was released on 2006-09-06 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: BASYS conferences were initially organized to promote the development of balanced automation systems. The first BASYS conference was successfully launched in Victoria, Brazil, in 1995. BASYS'06 is the 7th edition in this series. This book comprises three invited keynote papers and forty-nine regular papers accepted for presentation at the conference. All together, these papers will make significant contributions to the literature of Intelligent Technology for Balanced Manufacturing Systems.

Download or read book Digital Enterprise Technology written by Pedro Filipe Cunha and published by Springer Science & Business Media. This book was released on 2007-09-18 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first Digital Enterprise Technology (DET) International Conference was held in Durham, UK in 2002 and the second DET Conference in Seattle, USA in 2004. Sponsored by CIRP (College International pour la Recherche en Productique), the third DET Conference took place in Setúbal, Portugal in 2006. Digital Enterprise Technology: Perspectives and Future Challenges is an edited volume based on this conference. Topics include: distributed and collaborative design, process modeling and process planning, advanced factory equipment and layout design and modeling, physical-to-digital environment integrators, enterprise integration technologies, and entrepreneurship in DET.

Download or read book American Doctoral Dissertations written by and published by . This book was released on 2002 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Industry 4 0 Managing The Digital Transformation written by Alp Ustundag and published by Springer. This book was released on 2017-09-14 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive guide to Industry 4.0 applications, not only introducing implementation aspects but also proposing a conceptual framework with respect to the design principles. In addition, it discusses the effects of Industry 4.0, which are reflected in new business models and workforce transformation. The book then examines the key technological advances that form the pillars of Industry 4.0 and explores their potential technical and economic benefits using examples of real-world applications. The changing dynamics of global production, such as more complex and automated processes, high-level competitiveness and emerging technologies, have paved the way for a new generation of goods, products and services. Moreover, manufacturers are increasingly realizing the value of the data that their processes and products generate. Such trends are transforming manufacturing industry to the next generation, namely Industry 4.0, which is based on the integration of information and communication technologies and industrial technology.The book provides a conceptual framework and roadmap for decision-makers for this transformation

Download or read book Fundamentals of Business Process Management written by Marlon Dumas and published by Springer. This book was released on 2018-03-23 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers the entire Business Process Management (BPM) lifecycle, from process identification to process monitoring, covering along the way process modelling, analysis, redesign and automation. Concepts, methods and tools from business management, computer science and industrial engineering are blended into one comprehensive and inter-disciplinary approach. The presentation is illustrated using the BPMN industry standard defined by the Object Management Group and widely endorsed by practitioners and vendors worldwide. In addition to explaining the relevant conceptual background, the book provides dozens of examples, more than 230 exercises – many with solutions – and numerous suggestions for further reading. This second edition includes extended and completely revised chapters on process identification, process discovery, qualitative process analysis, process redesign, process automation and process monitoring. A new chapter on BPM as an enterprise capability has been added, which expands the scope of the book to encompass topics such as the strategic alignment and governance of BPM initiatives. The textbook is the result of many years of combined teaching experience of the authors, both at the undergraduate and graduate levels as well as in the context of professional training. Students and professionals from both business management and computer science will benefit from the step-by-step style of the textbook and its focus on fundamental concepts and proven methods. Lecturers will appreciate the class-tested format and the additional teaching material available on the accompanying website.