Download or read book Application of Lagrangian Finite Element Methods to Two dimensional Fluid structure Interaction Problems written by Shawn Joseph Edwin Wade and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Lagrangian finite-element methods are presented in this thesis as a solution technique for solving representative problems in the field of fluid structure interaction. In particular, the Variable Element Topology Finite Element Method (VETFEM), in conjunction with remeshing and solution remapping, is investigated. VETFEM is a displacement based variational method that utilizes all of the strengths of traditional finite element methods while aleviating the geometric and topological constraints. The specific example problems investigated fall into the category of two-dimensional transient motions of liquids with a free boundary, with structure interaction, and were chosen due to the large deformations inherent in these applications. The large deformations that occur in these problems require several instances of remeshing, which is greatly simplified by the VETFEM. The test problem that was used to refine the techniques consisted of a simple rectangular basin of fluid that was 20m wide and 5m deep, and was subjected to a cyclical lateral movement. The main problem consisted of a 37m tall dam with a 120m wide by 27m deep rectangular basin. The system was then subjected to a ground motion, and the resulting stresses in the dam were observed. Lastly, in order to determine the effects of modeling the dynamic loading of the fluid on the dam, a dam that was only subjected to the equivalent hydrostatic pressure and the same ground motion was observed.
Download or read book Fluid structure Interactions written by Thomas Richter and published by Springer. This book was released on 2017-08-26 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book starts by introducing the fundamental concepts of mathematical continuum mechanics for fluids and solids and their coupling. Special attention is given to the derivation of variational formulations for the subproblems describing fluid- and solid-mechanics as well as the coupled fluid-structure interaction problem. Two monolithic formulations for fluid-structure interactions are described in detail: the well-established ALE formulation and the modern Fully Eulerian formulation, which can effectively deal with problems featuring large deformation and contact. Further, the book provides details on state-of-the-art discretization schemes for fluid- and solid-mechanics and considers the special needs of coupled problems with interface-tracking and interface-capturing techniques. Lastly, advanced topics like goal-oriented error estimation, multigrid solution and gradient-based optimization schemes are discussed in the context of fluid-structure interaction problems.
Download or read book Computational Mechanics of Fluid Structure Interaction written by Rajeev Kumar Jaiman and published by Springer Nature. This book was released on 2021-11-29 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to provide a compilation of the state-of-the-art numerical methods for nonlinear fluid-structure interaction using the moving boundary Lagrangian-Eulerian formulation. Single and two-phase viscous incompressible fluid flows are considered with the increasing complexity of structures ranging from rigid-body, linear elastic and nonlinear large deformation to fully-coupled flexible multibody system. This book is unique with regard to computational modeling of such complex fluid-structure interaction problems at high Reynolds numbers, whereby various coupling techniques are introduced and systematically discussed. The techniques are demonstrated for large-scale practical problems in aerospace and marine/offshore engineering. This book also provides a comprehensive understanding of underlying unsteady physics and coupled mechanical aspects of the fluid-structure interaction from a computational point of view. Using the body-fitted and moving mesh formulations, the physical insights associated with structure-to-fluid mass ratios (i.e., added mass effects), Reynolds number, large structural deformation, free surface, and other interacting physical fields are covered. The book includes the basic tools necessary to build the concepts required for modeling such coupled fluid-structure interaction problems, thus exposing the reader to advanced topics of multiphysics and multiscale phenomena.
Download or read book The Least Squares Finite Element Method written by Bo-nan Jiang and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first monograph on the subject, providing a comprehensive introduction to the LSFEM method for numerical solution of PDEs. LSFEM is simple, efficient and robust, and can solve a wide range of problems in fluid dynamics and electromagnetics.
Download or read book Fluid Structure Interaction written by Jean-François Sigrist and published by John Wiley & Sons. This book was released on 2015-09-23 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid-Structure Interaction: An Introduction to Finite Element Coupling fulfils the need for an introductive approach to the general concepts of Finite and Boundary Element Methods for FSI, from the mathematical formulation to the physical interpretation of numerical simulations. Based on the author’s experience in developing numerical codes for industrial applications in shipbuilding and in teaching FSI to both practicing engineers and within academia, it provides a comprehensive and self–contained guide that is geared toward both students and practitioners of mechanical engineering. Composed of six chapters, Fluid–Structure Interaction: An Introduction to Finite Element Coupling progresses logically from formulations and applications involving structure and fluid dynamics, fluid and structure interactions and opens to reduced order-modelling for vibro-acoustic coupling. The author describes simple yet fundamental illustrative examples in detail, using analytical and/or semi–analytical formulation & designed both to illustrate each numerical method and also to highlight a physical aspect of FSI. All proposed examples are simple enough to be computed by the reader using standard computational tools such as MATLAB, making the book a unique tool for self–learning and understanding the basics of the techniques for FSI, or can serve as verification and validation test cases of industrial FEM/BEM codes rendering the book valuable for code verification and validation purposes.
Download or read book Arbitrary Lagrangian Eulerian and Fluid Structure Interaction written by M'hamed Souli and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the fundamental basics for solving fluid structure interaction problems, and describes different algorithms and numerical methods used to solve problems where fluid and structure can be weakly or strongly coupled. These approaches are illustrated with examples arising from industrial or academic applications. Each of these approaches has its own performance and limitations. The added mass technique is described first. Following this, for general coupling problems involving large deformation of the structure, the Navier-Stokes equations need to be solved in a moving mesh using an ALE formulation. The main aspects of the fluid structure coupling are then developed. The first and by far simplest coupling method is explicit partitioned coupling. In order to preserve the flexibility and modularity that are inherent in the partitioned coupling, we also describe the implicit partitioned coupling using an iterative process. In order to reduce computational time for large-scale problems, an introduction to the Proper Orthogonal Decomposition (POD) technique applied to FSI problems is also presented. To extend the application of coupling problems, mathematical descriptions and numerical simulations of multiphase problems using level set techniques for interface tracking are presented and illustrated using specific coupling problems. Given the book's comprehensive coverage, engineers, graduate students and researchers involved in the simulation of practical fluid structure interaction problems will find this book extremely useful.
Download or read book Unified Lagrangian Formulation for Fluid and Solid Mechanics Fluid Structure Interaction and Coupled Thermal Problems Using the PFEM written by Alessandro Franci and published by Springer. This book was released on 2016-10-04 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book treats the derivation and implementation of a unified particle finite element formulation for the solution of fluid and solid mechanics, Fluid-Structure Interaction (FSI) and coupled thermal problems. FSI problems are involved in many engineering branches, from aeronautics to civil and biomedical engineering. The numerical method proposed in this book has been designed to deal with a large part of these. In particular, it is capable of simulating accurately free-surface fluids interacting with structures that may undergo large displacements, suffer from thermo-plastic deformations and even melt. The method accuracy has been successfully verified in several numerical examples. The thesis also contains the application of the proposed numerical strategy for the simulation of a real industrial problem. This thesis, defended at the Universitat Politecnica de Catalunya in 2015, was selected (ex aequo) as the best PhD thesis in numerical methods in Spain for the year 2015 by the Spanish Society of Numerical Methods in Engineering (SEMNI).
Download or read book Coupled Boundary and Finite Element Methods for the Solution of the Dynamic Fluid Structure Interaction Problem written by Siamak Amini and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text considers the problem of the dynamic fluid-structure interaction between a finite elastic structure and the acoustic field in an unbounded fluid-filled exterior domain. The exterior acoustic field is modelled through a boundary integral equation over the structure surface. However, the classical boundary integral equation formulations of this problem either have no solutions or do not have unique solutions at certain characteristic frequencies (which depend on the surface geometry) and it is necessary to employ modified boundary integral equation formulations which are valid for all frequencies. The particular approach adopted here involves an arbitrary coupling parameter and the effect that this parameter has on the stability and accuracy of the numerical method used to solve the integral equation is examined. The boundary integral analysis of the exterior acoustic problem is coupled with a finite element analysis of the elastic structure in order to investigate the interaction between the dynamic behaviour of the structure and the associated acoustic field. Recently there has been some controversy over whether or not the coupled problem also suffers from the non-uniqueness problems associated with the classical integral equation formulations of the exterior acoustic problem. This question is resolved by demonstrating that .the solution to the coupled problem is not unique at the characteristic frequencies and that it is necessary to employ an integral equation formulation valid for all frequencies.
Download or read book Fluid Structure Interaction written by Hans-Joachim Bungartz and published by Springer Science & Business Media. This book was released on 2007-06-24 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume in the series Lecture Notes in Computational Science and Engineering presents a collection of papers presented at the International Workshop on FSI, held in October 2005 in Hohenwart and organized by DFG's Research Unit 493 "FSI: Modeling, Simulation, and Optimization". The papers address partitioned and monolithic coupling approaches, methodical issues and applications, and discuss FSI from the mathematical, informatics, and engineering points of view.
Download or read book Fluid Structure Interaction written by Stefan Frei and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-11-20 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph discusses modeling, adaptive discretisation techniques and the numerical solution of fluid structure interaction. An emphasis in part I lies on innovative discretisation and advanced interface resolution techniques. The second part covers the efficient and robust numerical solution of fluid-structure interaction. In part III, recent advances in the application fields vascular flows, binary-fluid-solid interaction, and coupling to fractures in the solid part are presented. Moreover each chapter provides a comprehensive overview in the respective topics including many references to concurring state-of-the art work. Contents Part I: Modeling and discretization On the implementation and benchmarking of an extended ALE method for FSI problems The locally adapted parametric finite element method for interface problems on triangular meshes An accurate Eulerian approach for fluid-structure interactions Part II: Solvers Numerical methods for unsteady thermal fluid structure interaction Recent development of robust monolithic fluid-structure interaction solvers A monolithic FSI solver applied to the FSI 1,2,3 benchmarks Part III: Applications Fluid-structure interaction for vascular flows: From supercomputers to laptops Binary-fluid–solid interaction based on the Navier–Stokes–Cahn–Hilliard Equations Coupling fluid-structure interaction with phase-field fracture: Algorithmic details
Download or read book A Space time Finite Element Method for Fluid structure Interaction written by Arif Masud and published by . This book was released on 1993 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluid Structure Interaction II written by Hans-Joachim Bungartz and published by Springer Science & Business Media. This book was released on 2010-09-28 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid-structure interactions (FSI), i.e., the interplay of some moveable or deformable structure with an internal or surrounding fluid, are among the most widespread and most challenging coupled or multi-physics problems. Although much has been accomplished in developing good computational FSI methods and despite convincing solutions to a number of classes of problems including those presented in this book, there is a need for more comprehensive studies showing that the computational methods proposed are reliable, robust, and efficient beyond the classes of problems they have successfully been applied to.This volume of LNCSE, a sequel to vol. 53, which contained, among others, the first numerical benchmark for FSI problems and has received considerable attention since then, presents a collection of papers from the "First International Workshop on Computational Engineering - special focus FSI," held in Herrsching in October 2009 and organized by three DFG-funded consortia. The papers address all relevant aspects of FSI simulation and discuss FSI from the mathematical, informatical, and engineering perspective.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlinear Dynamic Fluid structure Interaction Calculations with Coupled Finite Element and Finite Volume Programs written by and published by . This book was released on 1994 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two- and three-dimensional fluid-structure interaction computer programs for the simulation of nonlinear dynamics were developed and applied to a number of problems. The programs were created by coupling Arbitrary Lagrangian-Eulerian finite volume fluid dynamics programs with strictly Lagrangian finite element structural dynamics programs. The resulting coupled programs can use either fully explicit or implicit time integration. The implicit time integration is accomplished by iterations of the fluid dynamics pressure solver and the structural dynamics system solver. The coupled programs have been used to solve problems involving incompressible fluids, membrane and shell elements, compressible multiphase flows, explosions in both air and water, and large displacements. In this paper, we present the approach used for the coupling and describe test problems that verify the two-dimensional programs against an experiment and an analytical linear problem. The experiment involves an explosion underwater near an instrumented thin steel plate. The analytical linear problem is the vibration of an infinite cylinder surrounded by an incompressible fluid to a given radius.
Download or read book Fluid Solid Interaction Dynamics written by Jing Tang Xing and published by Academic Press. This book was released on 2019-08-30 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid-Solid Interaction Dynamics: Theory, Variational Principles, Numerical Methods and Applications gives a comprehensive accounting of fluid-solid interaction dynamics, including theory, numerical methods and their solutions for various FSI problems in engineering. The title provides the fundamental theories, methodologies and results developed in the application of FSI dynamics. Four numerical approaches that can be used with almost all integrated FSI systems in engineering are presented. Methods are linked with examples to illustrate results. In addition, numerical results are compared with available experiments or numerical data in order to demonstrate the accuracy of the approaches and their value to engineering applications. The title gives readers the state-of-the-art in theory, variational principles, numerical modeling and applications for fluid-solid interaction dynamics. Readers will be able to independently formulate models to solve their engineering FSI problems using information from this book. - Presents the state-of-the-art in fluid-solid interaction dynamics, providing theory, method and results - Takes an integrated approach to formulate, model and simulate FSI problems in engineering - Illustrates results with concrete examples - Gives four numerical approaches and related theories that are suitable for almost all integrated FSI systems - Provides the necessary information for bench scientists to independently formulate, model, and solve physical FSI problems in engineering
Download or read book Frontiers in Computational Fluid Structure Interaction and Flow Simulation written by Tayfun E. Tezduyar and published by Springer. This book was released on 2018-10-26 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational fluid-structure interaction and flow simulation are challenging research areas that bring solution and analysis to many classes of problems in science, engineering, and technology. Young investigators under the age of 40 are conducting much of the frontier research in these areas, some of which is highlighted in this book. The first author of each chapter took the lead role in carrying out the research presented. The topics covered include Computational aerodynamic and FSI analysis of wind turbines, Simulating free-surface FSI and fatigue-damage in wind-turbine structural systems, Aorta flow analysis and heart valve flow and structure analysis, Interaction of multiphase fluids and solid structures, Computational analysis of tire aerodynamics with actual geometry and road contact, and A general-purpose NURBS mesh generation method for complex geometries. This book will be a valuable resource for early-career researchers and students — not only those interested in computational fluid-structure interaction and flow simulation, but also other fields of engineering and science, including fluid mechanics, solid mechanics and computational mathematics – as it will provide them with inspiration and guidance for conducting their own successful research. It will also be of interest to senior researchers looking to learn more about successful research led by those under 40 and possibly offer collaboration to these researchers.
Download or read book Fluid Structure Interaction written by Henri J.-P. Morand and published by Wiley. This book was released on 1995-08-29 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to describe the methods leading to mechanical and numerical modelling of the linear vibrations of elastic structures coupled with internal fluids (sloshing, hydroelasticity and structural acoustics). It is characteristic of the problems under consideration that they are multidisciplinary involving structural and fluid representation and related numerical aspects. The problems are solved by direct resolution of the coupled systems by finite element methods and modal reduction procedures using the eigenmodes of ?elementary subsystems?. The numerical methods described in this book have applications in various engineering disciplines such as the automotive and aerospace industries, civil engineering, nuclear engineering and bioengineering.
