Download or read book Application of Fracture Mechanics for Selection of Metallic Structural Materials written by James Edward Campbell and published by . This book was released on 1982 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Application of Fracture Toughness Parameters to Structural Metals written by Metallurgical Society of AIME. Institute of Metals Division. Structural Materials Technical Committee and published by . This book was released on 1966 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture and Fatigue Control in Structures written by Stanley Theodore Rolfe and published by ASTM International. This book was released on 1977 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizes applications of fracture mechanics to prevent fracture and fatigue failures in structures, rather than the theoretical aspects of fracture mechanics. The concepts of driving force and resistance force are used to differentiate between the mathematical side and the materials side. Case studies of actual failures are new to the third edition. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Fracture Mechanics of Metals Composites Welds and Bolted Joints written by Bahram Farahmand and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the preliminary stage of designing new structural hardware to perform a given mission in a fluctuating load environment, there are several factors that the designer should consider. Trade studies for different design configurations should be performed and, based on strength and weight considerations, among others, an optimum configuration selected. The selected design must withstand the environment in question without failure. Therefore, a comprehensive structural analysis that consists of static, dynamic, fatigue, and fracture is necessary to ensure the integrity of the structure. Engineers must also consider the feasibility of fabricating the structural hardware in the material selection process. During the past few decades, fracture mechanics has become a necessary discipline for the solution of many structural problems in which the survivability of structure containing pre-existing flaws is of great interest. These problems include structural failures resulting from cracks that are inherent in the material, or defects that are introduced in the part due to improper handling or rough machining, that must be assessed through fracture mechanics concepts.
Download or read book Advances in Research on the Strength and Fracture of Materials written by D.M.R. Taplin and published by Elsevier. This book was released on 2013-10-22 with total page 873 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Research on the Strength and Fracture of Materials: Volume 1s—An Overview contains the proceedings of the Fourth International Conference on Fracture held at the University of Waterloo, Canada, in June 1977. The papers review the state of the art with respect to fracture in a wide range of materials such as metals and alloys, polymers, ceramics, and composites. This volume is comprised of 40 chapters and opens with a discussion on progress in the development of elementary fracture mechanism maps and their application to metal deformation processes, along with micro-mechanisms of fracture and the fracture toughness of engineering alloys. The next section is devoted to the fracture of large-scale structures such as steel structures, aircraft, cargo containment systems, nuclear reactors, and pressure vessels. Fracture at high temperatures and in sensitive environments is then explored, paying particular attention to creep failure by cavitation under non-steady conditions; the effects of hydrogen and impurities on brittle fracture in steel; and mechanism of embrittlement and brittle fracture in liquid metal environments. The remaining chapters consider the fracture of non-metallic materials as well as developments and concepts in the application of fracture mechanics. This book will be of interest to metallurgists, materials scientists, and structural and mechanical engineers.
Download or read book Fatigue and Durability of Structural Materials written by Gary R. Halford and published by ASM International. This book was released on 2006 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue and Durability of Structural Materials explains how mechanical material behavior relates to the design of structural machine components. The major emphasis is on fatigue and failure behavior using engineering models that have been developed to predict, in advance of service, acceptable fatigue and other durability-related lifetimes. The book covers broad classes of materials used for high-performance structural applications such as aerospace components, automobiles, and power generation systems. Coverage focuses on metallic materials but also addresses unique capabilities of important nonmetals. The concepts are applied to behavior at room or ambient temperatures; a planned second volume will address behavior at higher-temperatures. The volume is a repository of the most significant contributions by the authors to the art and science of material and structural durability over the past half century. During their careers, including 40 years of direct collaboration, they have developed a host of durability models that are based on sound physical and engineering principles. Yet, the models and interpretation of behavior have a unique simplicity that is appreciated by the practicing engineer as well as the beginning student. In addition to their own pioneering work, the authors also present the work of numerous others who have provided useful results that have moved progress in these fields. This book will be of immense value to practicing mechanical and materials engineers and designers charged with producing structural components with adequate durability. The coverage is appropriate for a range of technical levels from undergraduate engineering students through material behavior researchers and model developers. It will be of interest to personnel in the automotive and off-highway vehicle manufacturing industry, the aeronautical industry, space propulsion and the power generation/conversion industry, the electric power industry, the machine tool industry, and any industry associated with the design and manufacturing of mechanical equipment subject to cyclic loads.
Download or read book Fracture of Structural Materials written by A. S. Tetelman and published by John Wiley & Sons. This book was released on 1967 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book DESIGN AGAINST FRACTURE AND FAILURE written by Zainul Huda and published by Trans Tech Publications Ltd. This book was released on 2010-04-22 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS). The aim of this book is to develop, in the reader, the necessary skills required for designing materials, components and structures so as to resist fracture and failure in engineering applications. In order to achieve this objective, the authors have adopted a combined materials science-fracture mechanics-design approach. Although the material covered is designed for an advanced undergraduate course in metallurgy/materials engineering, students coming from mechanical, civil or aerospace engineering backgrounds will also be able to use this text as a course/reference book. In addition to students, practising engineers and production mangers will also find this book very useful; particular with regard to designing components and machine elements so as to resist fracture and failure in critical applications.
Download or read book Fatigue and Fracture Mechanics of High Risk Parts written by Bahram Farahmand and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the preliminary stage of designing new structural hardware that must perform a given mission in a fluctuating load environment, there are several factors the designers should consider. Trade studies for different design configurations should be performed and, based on strength and weight considerations, among others, an optimum configuration selected. The selected design must be able to withstand the environment in question without failure. Therefore, a comprehen sive structural analysis that consists of static, dynamic, fatigue, and fracture is necessary to ensure the integrity of the structure. During the past few decades, fracture mechanics has become a necessary discipline for the solution of many structural problems. These problems include the prevention of failures resulting from preexisting cracks in the parent material, welds or that develop under cyclic loading environment during the life of the structure. The importance of fatigue and fracture in nuclear, pressure vessel, aircraft, and aerospace structural hardware cannot be overemphasized where safety is of utmost concern. This book is written for the designer and strength analyst, as well as for the material and process engineer who is concerned with the integrity of the structural hardware under load-varying environments in which fatigue and frac ture must be given special attention. The book is a result of years of both acade mic and industrial experiences that the principal author and co-authors have accumulated through their work with aircraft and aerospace structures.
Download or read book Application of Fracture Toughness Parameters to Structural Metals written by Metallurgical Society of AIME. Fall meeting and published by . This book was released on 1966 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Damage Tolerance of Metallic Structures written by J. B. Chang and published by ASTM International. This book was released on 1984 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture Toughness Testing and Its Applications written by and published by ASTM International. This book was released on 1965 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture and Society written by Masateru Ohnami and published by IOS Press. This book was released on 1992 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: An historical account of experts who have developed the science and technology of the fracture of many kinds of solids. These range from natural materials, such as rock and woods, to artificial structural materials such as those used in space transport.
Download or read book Brittle Fracture in Steel Structures written by G.M. Boyd and published by Elsevier. This book was released on 2016-01-22 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brittle Fracture in Steel Structures emphasizes the prevention of brittle fracture in structures fabricated from mild and low alloy steel operating at normal ambient temperatures. This book is divided into seven chapters. Chapter 1 provides the historical background and summarizes numerous case histories of brittle fractures. The nature of the phenomenon and factors that influence brittle fracture, including various methods of testing to determine the notch ductilities of different steels are described in Chapters 2 to 4. The fifth chapter elaborates the design considerations affecting the choice of steel for structural applications. Chapter 6 reviews the main methods for assessing the degree of notch ductility needed for different applications, while Chapter 7 deliberates practical procedures, recommended by the Navy Department Advisory Committee on Structural Steels, for assessing the suitability of different steels for particular applications. This publication is beneficial to metallurgists and welders intending to acquire knowledge of mild steel structures fabricated by welding from rolled steel plates and sections.
Download or read book Fatigue and Fracture of Materials and Structures written by Grzegorz Lesiuk and published by Springer Nature. This book was released on 2022-05-09 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected contributions from ICMFM XX and the Polish National Conference—KKMP. The XX International Colloquium on Mechanical Fatigue of Metals (ICMFM XX) was organized on 15–17 September 2021, in the Faculty of Mechanical Engineering of the Wroclaw University of Science and Technology, in Wrocław City, Poland, in a remote form. Its aim was to facilitate and encourage the exchange of knowledge and experiences among the different communities involved in both basic and applied research in the field of fatigue of metals, looking at the problem of fatigue from a multiscale perspective, and exploring analytical and numerical simulative approaches, without losing the perspectives of the application. The Polish National Conference—KKMP 2021—was organized remotely with 50–80 prominent international participants from the fracture mechanics community.
Download or read book Deformation and Fracture Mechanics of Engineering Materials written by Richard W. Hertzberg and published by John Wiley & Sons. This book was released on 1983 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated to reflect recent developments in our understanding of deformation and fracture processes in structural materials. This completely revised reference includes new sections on isostress analysis, modulus of rupture, creep fracture micromechanicsms, and many more.
Download or read book Applications and Non Metals written by D.M.R. Taplin and published by Elsevier. This book was released on 2013-10-22 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Research on the Strength and Fracture of Materials: Volume 3Bs—Applications and Non-Metals contains the proceedings of the Fourth International Conference on Fracture, held at the University of Waterloo, Canada, in June 1977. The papers review the state of the art with respect to testing of fracture in a wide range of non-metals such as ceramics, glass, composites, polymers, biomaterials, and concrete. This volume is divided into five sections and opens by discussing the role of acoustic emission in fracture toughness testing and the relation between static and dynamic fracture toughness of structural steels. The reader is then introduced to methods for determining stress-intensity factors of simplified geometries of structural parts; stress analysis of pressure vessels by thermal shock; the fracture toughness of constructional steels in cyclic loading; and fracture processes and fracture toughness in powder forged steels. The remaining chapters explore the influence of low-cycle damage on fracture toughness; fracture of structural alloys at temperatures approaching absolute zero; fracture mechanisms in Si-Al-O-N ceramics; propagation and bifurcation of cracks in quartz; and the effect of pressure and environment on the fracture and yield of polymers. This monograph will be a useful resource for metallurgists, materials scientists, and structural and mechanical engineers.
