Download or read book Fox and McDonald s Introduction to Fluid Mechanics written by Robert W. Fox and published by John Wiley & Sons. This book was released on 2020-06-30 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through ten editions, Fox and McDonald's Introduction to Fluid Mechanics has helped students understand the physical concepts, basic principles, and analysis methods of fluid mechanics. This market-leading textbook provides a balanced, systematic approach to mastering critical concepts with the proven Fox-McDonald solution methodology. In-depth yet accessible chapters present governing equations, clearly state assumptions, and relate mathematical results to corresponding physical behavior. Emphasis is placed on the use of control volumes to support a practical, theoretically-inclusive problem-solving approach to the subject. Each comprehensive chapter includes numerous, easy-to-follow examples that illustrate good solution technique and explain challenging points. A broad range of carefully selected topics describe how to apply the governing equations to various problems, and explain physical concepts to enable students to model real-world fluid flow situations. Topics include flow measurement, dimensional analysis and similitude, flow in pipes, ducts, and open channels, fluid machinery, and more. To enhance student learning, the book incorporates numerous pedagogical features including chapter summaries and learning objectives, end-of-chapter problems, useful equations, and design and open-ended problems that encourage students to apply fluid mechanics principles to the design of devices and systems.
Download or read book Parachute Recovery Systems written by Theo W. Knacke and published by . This book was released on 1992 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this manual is to provide recovery system engineers in government and industry with tools to evaluate, analyze, select, and design parachute recovery systems. These systems range from simple, one-parachute assemblies to multiple-parachute systems, and may include equipment for impact attenuation, flotation, location, retrieval, and disposition. All system aspects are discussed, including the need for parachute recovery, the selection of the most suitable recovery system concept, concept analysis, parachute performance, force and stress analysis, material selection, parachute assembly and component design, and manufacturing. Experienced recovery system engineers will find this publication useful as a technical reference book; recent college graduates will find it useful as a textbook for learning about parachutes and parachute recovery systems; and technicians with extensive practical experience will find it useful as an engineering textbook that includes a chapter on parachute- related aerodynamics. In this manual, emphasis is placed on aiding government employees in evaluating and supervising the design and application of parachute systems. The parachute recovery system uses aerodynamic drag to decelerate people and equipment moving in air from a higher velocity to a lower velocity and to a safe landing. This lower velocity is known as rate of descent, landing velocity, or impact velocity, and is determined by the following requirements: (1) landing personnel uninjured and ready for action, (2) landing equipment and air vehicles undamaged and ready for use or refurbishment, and (3) impacting ordnance at a preselected angle and velocity.
Download or read book History of Shock Waves Explosions and Impact written by Peter O. K. Krehl and published by Springer Science & Business Media. This book was released on 2008-09-24 with total page 1298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique and encyclopedic reference work describes the evolution of the physics of modern shock wave and detonation from the earlier and classical percussion. The history of this complex process is first reviewed in a general survey. Subsequently, the subject is treated in more detail and the book is richly illustrated in the form of a picture gallery. This book is ideal for everyone professionally interested in shock wave phenomena.
Download or read book Fluid Mechanics written by Walther Kaufmann and published by . This book was released on 1954 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Shock Tube in High Temperature Chemical Physics written by Alfred Gordon Gaydon and published by . This book was released on 2013-03 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Gallery of Fluid Motion written by M. Samimy and published by Cambridge University Press. This book was released on 2004-01-12 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: The visualization of fluid flow has played a major role in the development of fluid dynamics and its applications, from the evolution of flight to tracking weather, and understanding the flow of blood. The Fluid Dynamics Division of the American Physical Society sponsors an annual competition for outstanding images of fluid flow. This volume includes a selection of winners from 1985 to the present. Each image is accompanied by some explanatory text, making the volume an important acquisition for anyone involved in fluid flow research.
Download or read book Automotive Transmissions written by Yong Chen and published by Springer Nature. This book was released on 2020-07-30 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to the theory, design and applications of automotive transmissions. It covers multiple categories, e.g. AT, AMT, CVT, DCT and transmissions for electric vehicles, each of which has its own configuration and characteristics. In turn, the book addresses the effective design of transmission gear ratios, structures and control strategies, and other topics that will be of particular interest to graduate students, researchers and engineers. Moreover, it includes real-world solutions, simulation methods and testing procedures. Based on the author’s extensive first-hand experience in the field, the book allows readers to gain a deeper understanding of vehicle transmissions.
Download or read book Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by Elsevier. This book was released on 2017-09-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. - Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers - A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field - The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems
Download or read book Innovations in Biomedical Engineering written by Marek Gzik and published by Springer Nature. This book was released on 2022-05-31 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest developments in the field of biomedical engineering and includes practical solutions and strictly scientific considerations. The development of new methods of treatment, advanced diagnostics or personalized rehabilitation requires close cooperation of experts from many fields, including, among others, medicine, biotechnology and finally biomedical engineering. The latter, combining many fields of science, such as computer science, materials science, biomechanics, electronics not only enables the development and production of modern medical equipment, but also participates in the development of new directions and methods of treatment. The presented monograph is a collection of scientific papers on the use of engineering methods in medicine. The topics of the work include both practical solutions and strictly scientific considerations expanding knowledge about the functioning of the human body. We believe that the presented works will have an impact on the development of the field of science, which is biomedical engineering, constituting a contribution to the discussion on the directions of development of cooperation between doctors, physiotherapists and engineers. We would also like to thank all the people who contributed to the creation of this monograph—both the authors of all the works and those involved in technical works.
Download or read book Cement Production Technology written by Anjan Kumar Chatterjee and published by CRC Press. This book was released on 2018-04-27 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is an outcome of the author’s active professional involvement in research, manufacture and consultancy in the field of cement chemistry and process engineering. This multidisciplinary title on cement production technology covers the entire process spectrum of cement production, starting from extraction and winning of natural raw materials to the finished products including the environmental impacts and research trends. The book has an overtone of practice supported by the back-up principles.
Download or read book Chemical Micro Process Engineering written by Volker Hessel and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro process engineering is approaching both academia and industry. With the provision of micro devices, systems and whole plants by commercial suppliers, one main barrier for using these units has been eliminated. This book focuses on processes and their plants rather than on devices: what is 'before', 'behind' and 'around' micro device fabrication - and gives a comprehensive and detailed overview on the micro-reactor plants and three topic-class applications which are mixing, fuel processing, and catalyst screening. Thus, the book reflects the current level of development from 'micro-reactor design' to 'micro-reactor process design'.
Download or read book Ventilation for Control of the Work Environment written by William A. Burgess and published by John Wiley & Sons. This book was released on 2004-07-12 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Ventilation Control of the Work Environment incorporates changes in the field of industrial hygiene since the first edition was published in 1982. Integrating feedback from students and professionals, the new edition includes problems sets for each chapter and updated information on the modeling of exhaust ventilation systems, and thus assures the continuation of the book's role as the primary industry textbook. This revised text includes a large amount of material on HVAC systems, and has been updated to reflect the changes in the Ventilation Manual published by ACGIH. It uses both English and metric units, and each chapter concludes with a problem set.
Download or read book Introduction to Fluid Mechanics written by Robert W. Fox and published by John Wiley & Sons. This book was released on 2008 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the bestselling books in the field, Introduction to Fluid Mechanics continues to provide readers with a balanced and comprehensive approach to mastering critical concepts. The new seventh edition once again incorporates a proven problem-solving methodology that will help them develop an orderly plan to finding the right solution. It starts with basic equations, then clearly states assumptions, and finally, relates results to expected physical behavior. Many of the steps involved in analysis are simplified by using Excel.
Download or read book Rules of Thumb for Chemical Engineers written by Carl Branan and published by Gulf Professional Publishing. This book was released on 2002 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fractionators, separators and accumulators, cooling towers, gas treating, blending, troubleshooting field cases, gas solubility, and density of irregular solids * Hundreds of common sense techniques, shortcuts, and calculations.
Download or read book Theoretical Computational and Experimental Solutions to Thermo Fluid Systems written by Muthukumar Palanisamy and published by Springer Nature. This book was released on 2021-03-09 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Innovations in Thermo-Fluid Engineering and Sciences (ICITFES 2020). It covers topics in theoretical and experimental fluid dynamics, numerical methods in heat transfer and fluid mechanics, different modes of heat transfer, multiphase flow, fluid machinery, fluid power, refrigeration and air conditioning, and cryogenics. The book will be helpful to the researchers, scientists, and professionals working in the field of fluid mechanics and machinery, and thermal engineering.
Download or read book Modelling Monitoring and Diagnostic Techniques for Fluid Power Systems written by John Watton and published by Springer Science & Business Media. This book was released on 2007-03-24 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the background theory of fluid power and indicates the range of concepts needed for a modern approach to condition monitoring and fault diagnosis. The theory is leavened by 15-years-worth of practical measurements by the author, working with major fluid power companies, and real industrial case studies. Heavily supported with examples drawn from real industrial plants – the methods in this book have been shown to work.
Download or read book W rtsil Encyclopedia of Ship Technology written by and published by . This book was released on 2015 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt:
