Download or read book Application of Cfd to the Analysis and Design of High Speed Inlets written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-06 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past seven years, efforts under the present Grant have been aimed at being able to apply modern Computational Fluid Dynamics to the design of high-speed engine inlets. In this report, a review of previous design capabilities (prior to the advent of functioning CFD) was presented and the example of the NASA 'Mach 5 inlet' design was given as the premier example of the historical approach to inlet design. The philosophy used in the Mach 5 inlet design was carried forward in the present study, in which CFD was used to design a new Mach 10 inlet. An example of an inlet redesign was also shown. These latter efforts were carried out using today's state-of-the-art, full computational fluid dynamics codes applied in an iterative man-in-the-loop technique. The potential usefulness of an automated machine design capability using an optimizer code was also discussed. Rose, William C. Unspecified Center...
Download or read book Survey of CFD Applications for High Speed Inlets written by Keith E. Numbers and published by . This book was released on 1994 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of techniques and methods for applying computational fluid dynamics (CFD) analysis to high speed inlets and related flows is provided via an extensive literature survey of such applications. Topics covered include governing equations, numerical integration schemes, boundary conditions, gridding requirements, and turbulence models. Results of applications from the literature survey shed light on the relative success of the techniques being used throughout the industry. (AN).
Download or read book Survey of CFD Applications for High Speed Inlets written by and published by . This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of techniques and methods for applying computational fluid dynamics (CFD) analysis to high speed inlets and related flows is provided via an extensive literature survey of such applications. Topics covered include governing equations, numerical integration schemes, boundary conditions, gridding requirements, and turbulence models. Results of applications from the literature survey shed light on the relative success of the techniques being used throughout the industry. (AN).
Download or read book A Method for Generating Reduced Order Linear Models of Supersonic Inlets written by National Aeronautics and Space Adm Nasa and published by . This book was released on 2020-04-08 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the modeling of high speed propulsion systems, there are at least two major categories of models. One is based on computational fluid dynamics (CFD), and the other is based on design and analysis of control systems. CFD is accurate and gives a complete view of the internal flow field, but it typically has many states and runs much slower dm real-time. Models based on control design typically run near real-time but do not always capture the fundamental dynamics. To provide improved control models, methods are needed that are based on CFD techniques but yield models that are small enough for control analysis and design. Chicatelli, Amy and Hartley, Tom T. Glenn Research Center...
Download or read book A Method for Generating Reduced Order Linear Models of Supersonic Inlets written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-02 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the modeling of high speed propulsion systems, there are at least two major categories of models. One is based on computational fluid dynamics (CFD), and the other is based on design and analysis of control systems. CFD is accurate and gives a complete view of the internal flow field, but it typically has many states and runs much slower dm real-time. Models based on control design typically run near real-time but do not always capture the fundamental dynamics. To provide improved control models, methods are needed that are based on CFD techniques but yield models that are small enough for control analysis and design. Chicatelli, Amy and Hartley, Tom T. Glenn Research Center...
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 1102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1995 with total page 1632 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Speed Catamarans and Multihulls written by Liang Yun and published by Springer. This book was released on 2018-10-29 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: High speed catamaran and multihull high speed marine vessel have become very popular in the last two decades. The catamaran has become the vessel of choice for the majority of high speed ferry operators worldwide. There have been significant advances in structural materials, and structural design has been combined with higher power density and fuel efficient engines to deliver ferries of increasing size. The multihull has proven itself to be a suitable configuration for active power projection across oceans as well as for coastal patrol and protection, operating at high speedd for insertion or retrieval with a low energy capability. At present there is no easily accessible material covering the combination of hydrodynamics, aerodynamics, and design issues including structures, powering and propulsion for these vehicles. Coverage in High Speed Catamarans and Multihulls includes an introduction to the history, evolution, and development of catamarans, followed by a theoretical calculation of wave resistance in shallow and deep water, as well as the drag components of the multihull. A discussion of vessel concept design describing design characteristics, empirical regression for determination of principal dimensions in preliminary design, general arrangement, and methods is also included. The book concludes with a discussion of experimental future vehicles currently in development including the small waterplane twin hull vessels, wave piercing catamarans, planing catamarans, tunnel planing catamarans and other multihull vessels.
Download or read book Design and Analysis Tool for External Compression Supersonic Inlets written by John W. Slater and published by BiblioGov. This book was released on 2013-07 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: A computational tool named SUPIN has been developed to design and analyze external-compression supersonic inlets for aircraft at cruise speeds from Mach 1.6 to 2.0. The inlet types available include the axisymmetric outward-turning, two-dimensional single-duct, two-dimensional bifurcated-duct, and streamline-traced Busemann inlets. The aerodynamic performance is characterized by the flow rates, total pressure recovery, and drag. The inlet flowfield is divided into parts to provide a framework for the geometry and aerodynamic modeling and the parts are defined in terms of geometric factors. The low-fidelity aerodynamic analysis and design methods are based on analytic, empirical, and numerical methods which provide for quick analysis. SUPIN provides inlet geometry in the form of coordinates and surface grids useable by grid generation methods for higher-fidelity computational fluid dynamics (CFD) analysis. SUPIN is demonstrated through a series of design studies and CFD analyses were performed to verify some of the analysis results.
Download or read book From Physics to Daily Life written by Beatrice Bressan and published by John Wiley & Sons. This book was released on 2014-11-03 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beatrice Bressan brings together a number of outstanding examples of successful cross-disciplinary technology transfer originating in fundamental physics research, which dramatically impacted scientific progress in areas which changed modern society. Many of them were developed at CERN, a hotbed of fundamental inventions in particle physics. This book deals with breakthrough developments being applied in the world of IT, consumer electronics, aviation, and material sciences. Additional sections of the book deal with knowledge management and technology transfer including their economic aspects. While each chapter has been drafted by an expert in the field, the editor has carefully edited the whole to ensure a coherent overall structure. A must-have for policy makers, technology companies, investors, strategic planners in research and technology, as well as attractive reading for the research community.
Download or read book Application of Computational Fluid Dynamics to the Analysis of Inlet Port Design in Internal Combustion Engines written by Anqi Chen and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances of CFD in Fluid Machinery Design written by Robin Elder and published by John Wiley & Sons. This book was released on 2003-02-07 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past Computational Fluid Dynamics (CFD) was confined to large organisations capable of developing and supporting their own codes. But recently there has been a rapid increase in the availability of reasonably priced commercial codes, and many more industrial organisations are now able to routinely use CFD. Advances of CFD in Fluid Machinery Design provide the perfect opportunity to find out what industry is doing and this book addresses how CFD is now being increasingly used in the design process, rather than as a post-design analysis tool. COMPLETE CONTENTS Trends in industrial use of CFD Challenges and methodologies in the design of axial flow fans for high-bypass-ratio, gas turbine engines using steady and unsteady CFD A three-dimensional inverse method based on pressure loading for the design of turbomachinery blades Application of CFD to the design and analysis of axial and centrifugal fans and compressors The design and performance of a transonic flow deswirling system – an application of current CFD design techniques tested against model and full-scale experiments Recent developments in unsteady flow modelling for turbomachinery aeroelasticity Computational investigation of flow in casing treatments for stall delay in axial flow fans Use of CFD for the three-dimensional hydrodynamic design of vertical diffuser pumps Recommendations to designers for CFD pump impeller and diffuser simulations Three dimensional CFD – a possibility to analyse piston pump flow dynamics CFD analysis of screw compressor performance Prediction of aerothermal phenomena in high-speed discstator systems Use of CFD in the design of a shaft seal for high-performance turbomachinery Users and potential users, of CFD for the design of fluid machinery, managers, designers, and researchers working in the field of ‘industrial flows’, will all find Advances of CFD in Fluid Machinery Design a valuable volume discussing state-of-the-art developments in CFD.
Download or read book Aeronautical Engineering written by and published by . This book was released on 1991 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA SP written by and published by . This book was released on 1992 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Modeling Grid Generation and Related Issues in Computational Fluid Dynamic CFD Solutions written by and published by . This book was released on 1995 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalogue United States Public Documents written by and published by . This book was released on 1995 with total page 1638 pages. Available in PDF, EPUB and Kindle. Book excerpt:
