Download or read book Application and Characterization of Energy Deposition in High Speed Flow Control written by Mona Golbabaei-Asl and published by . This book was released on 2014 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy deposition is a robust technique for various high speed flow control applications including drag reduction. A numerical study is performed for perfect gas flow approaching a blunt cylinder at Mach 3. The energy deposition is simulated by a high temperature filament injected in front of the cylinder. The effect of important dimensionless parameters is studied to characterize the drag modification. The results indicate a saturation effect on maximum drag reduction at higher magnitudes of energy deposition. The computations reveal that the discharge location of the filament does not significantly impact the drag. A phenomenological examination of the interaction is performed. The effectiveness and efficiency of the filament on drag reduction are investigated. A one-dimensional analytical approach is studied to describe the numerical results.
Download or read book Energy Deposition for High Speed Flow Control written by Doyle D. Knight and published by Cambridge University Press. This book was released on 2019-02-21 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes energy deposition using direct current (DC), microwave and laser discharge for flow control at high speeds.
Download or read book Energy Deposition for High Speed Flow Control written by Doyle D. Knight and published by Cambridge University Press. This book was released on 2019-02-21 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a leading expert in the field, this book presents a novel method for controlling high-speed flows past aerodynamic shapes using energy deposition via direct current (DC), laser or microwave discharge, and describes selected applications in supersonic and hypersonic flows. Emphasizing a deductive approach, the fundamental physical principles provided give an understanding of the simplified mathematical models derived therefrom. These features, along with an extensive set of 55 simulations, make the book an invaluable reference that will be of interest to researchers and graduate students working in aerospace engineering and in plasma physics.
Download or read book Directed Energy Deposition Flow Control for High Speed Intake Applications written by Andrew Russell and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Directed Energy Deposition Characterization and Modeling written by Cameron Myron Knapp and published by . This book was released on 2018 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing has seen a rapid rise in implementation into modern manufacturing schemata. The success or failure of its full adoption into stringent engineering environments hinges on bridging the qualification gap that currently exists. Qualification of high performance components requires the ability to control the deposition and fusion of material to minimize geometric variation and defect introduction. This research focuses on the characterization and instrumentation of an Optomec LENS MR-7 to conduct targeted experiments in support of advancing the fundamental understanding of the DED process. Initial efforts to control the DED process focused on evaluating a theoretical passive feedback mechanism associated with the laser alignment. Preliminary experiments confirmed the theory of a passive deposition stability associated with overfocusing the laser at initial alignment. However, this experimental series revealed how much was truly uncontrolled in the process. Ideally a lightweight model was needed that could predict the effect of changes to deposition parameters. A model of this type could be used to reduce the number of Edisonian experiments needed to develop new material systems or optimize for specific deposition characteristics. A thermodynamically governed model was proposed that included mathematical models that govern physical processes, material properties, and two experimental fits. This model can be executed in seconds on a laptop style computer and can predict deposition characteristics such as height, width, deposition rate, powder capture efficiency, and melting efficiency. A controlled set of experiments was done on 304L stainless steel, Ti-6Al-4V titanium alloy, and A356.1 aluminum alloy to evaluate the accuracy of the model. The model demonstrated a predictive capability within 10% of measured values and the ability to predict when departure from stable conditions would likely occur.
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1980 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NBS Special Publication written by and published by . This book was released on 1968 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Issues in Analysis Measurement Monitoring Imaging and Remote Sensing Technology 2012 Edition written by and published by ScholarlyEditions. This book was released on 2013-01-10 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Analysis, Measurement, Monitoring, Imaging, and Remote Sensing Technology: 2012 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Chromatography. The editors have built Issues in Analysis, Measurement, Monitoring, Imaging, and Remote Sensing Technology: 2012 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Chromatography in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Analysis, Measurement, Monitoring, Imaging, and Remote Sensing Technology: 2012 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Localized Flow Control with Energy Deposition written by Russell G. Adelgren and published by . This book was released on 2002 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: A series of experiments with energy deposition via laser-induced optical breakdown of air, i.e., a laser spark, have been performed. These experiments have demonstrated the possibility of using a laser spark for supersonic flow control. A focused Nd:YAG laser (pulse time of 10 nanoseconds, pulse frequency of 10 Hz, and capable of energy levels up to 600 milli-Joules per pulse) was used to create the energy deposition laser spark. This laser energy deposition was then tested in quiescent air, upstream of a Mach 3.45 sphere with and without shock impingement, into shock structures within the dual solution domain, and into a compressible shear layer.
Download or read book Publications of the National Bureau of Standards 1979 Catalog written by United States. National Bureau of Standards and published by . This book was released on 1980 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications of the National Bureau of Standards Catalog written by United States. National Bureau of Standards and published by . This book was released on 1980 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1982 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book AIAA Journal written by American Institute of Aeronautics and Astronautics and published by . This book was released on 2007 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of 5th International Conference on the Industry 4 0 Model for Advanced Manufacturing written by Lihui Wang and published by Springer Nature. This book was released on 2020-05-15 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 5th International Conference on the Industry 4.0 Model for Advanced Manufacturing (AMP 2020), held in Belgrade, Serbia, on 1–4 June 2020. The event marks the latest in a series of high-level conferences that bring together experts from academia and industry to exchange knowledge, ideas, experiences, research findings, and information in the field of manufacturing. The book addresses a wide range of topics, including: design of smart and intelligent products, developments in CAD/CAM technologies, rapid prototyping and reverse engineering, multistage manufacturing processes, manufacturing automation in the Industry 4.0 model, cloud-based products, and cyber-physical and reconfigurable manufacturing systems. By providing updates on key issues and highlighting recent advances in manufacturing engineering and technologies, the book supports the transfer of vital knowledge to the next generation of academics and practitioners. Further, it will appeal to anyone working or conducting research in this rapidly evolving field.
Download or read book Handbook of Environmental Degradation of Materials written by Myer Kutz and published by William Andrew. This book was released on 2012-09-24 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nothing stays the same for ever. The environmental degradation and corrosion of materials is inevitable and affects most aspects of life. In industrial settings, this inescapable fact has very significant financial, safety and environmental implications. The Handbook of Environmental Degradation of Materials explains how to measure, analyse, and control environmental degradation for a wide range of industrial materials including metals, polymers, ceramics, concrete, wood and textiles exposed to environmental factors such as weather, seawater, and fire. Divided into sections which deal with analysis, types of degradation, protection and surface engineering respectively, the reader is introduced to the wide variety of environmental effects and what can be done to control them. The expert contributors to this book provide a wealth of insider knowledge and engineering knowhow, complementing their explanations and advice with Case Studies from areas such as pipelines, tankers, packaging and chemical processing equipment ensures that the reader understands the practical measures that can be put in place to save money, lives and the environment. The Handbook's broad scope introduces the reader to the effects of environmental degradation on a wide range of materials, including metals, plastics, concrete,wood and textiles For each type of material, the book describes the kind of degradation that effects it and how best to protect it Case Studies show how organizations from small consulting firms to corporate giants design and manufacture products that are more resistant to environmental effects
Download or read book Introduction to Plasmas and Plasma Dynamics written by Hai-Bin Tang and published by Academic Press. This book was released on 2015-08-04 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Plasmas and Plasma Dynamics provides an accessible introduction to the understanding of high temperature, ionized gases necessary to conduct research and develop applications related to plasmas. While standard presentations of introductory material emphasize physics and the theoretical basis of the topics, this text acquaints the reader with the context of the basic information and presents the fundamental knowledge required for advanced work or study. The book relates theory to relevant devices and mechanisms, presenting a clear outline of analysis and mathematical detail; it highlights the significance of the concepts with reviews of recent applications and trends in plasma engineering, including topics of plasma formation and magnetic fusion, plasma thrusters and space propulsion. Presents the essential principles of plasma dynamics needed for effective research and development work in plasma applications Emphasizes physical understanding and supporting theoretical foundation with reference to their utilization in devices, mechanisms and phenomena Covers a range of applications, including energy conversion, space propulsion, magnetic fusion, and space physics
