Download or read book Calibration of Deterministic Parameters Reassessment of Offshore Platforms in the Arabian Gulf written by Hassan Zaghloul and published by Universal-Publishers. This book was released on 2011-04-18 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Arabian Gulf oil and gas production reserves have made it one of the world's strategic producers since the early 1960s, with many of the existing platforms stretched beyond their original design life. Advances in drilling technology and reservoir assessments have extended the requirement for the service life of those existing platforms even further. Extension of the life span of an existing platform requires satisfactory reassessment of its various structural components, including piled foundations. The American Petroleum Institute Recommended Practice 2A (API RP2A) is commonly used in the Arabian Gulf for reassessment of existing platforms. The API guidelines have been developed for conditions in the Gulf of Mexico, the waters off Alaska and the Pacific and Atlantic seaboards of the USA. However, the Arabian Gulf conditions are fundamentally different to those encountered in US waters. Hence, there is a need to develop guidelines for reassessment of existing offshore structures to account for the specific conditions of the Arabian Gulf. This thesis performs statistical analyses on databases collected during this research from existing platforms to calibrate relevant load and resistance factors for the required guidelines. The developed guidelines are based on established approaches used in developing international codes and standards such as API RP2A-LRFD. The outcome of this research revolves around the following three main issues: 1. Calibration of resistance factors for axial capacity of piles driven in the carbonate soils 2. Development of open area live loads (OALL) on offshore platforms 3. Effect of extreme storm conditions on the reliability of existing platforms in the Arabian Gulf The outcomes of this research are expected to have a profound influence onreassessment of existing platforms in the Arabian Gulf.
Download or read book Design Guides for Offsho written by P. Le Tirant and published by Editions OPHRYS. This book was released on with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental Load Factors and System Strength Evaluation of Offshore Jacket Platforms written by Zafarullah Nizamani and published by Springer. This book was released on 2015-01-27 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a study for the determination of environmental load factors for Jacket Platforms in Malaysia and a methodology to determine the life extension of aging platforms. The simplified methods described here could be used for determining not only structural reliability but also safety factors. Its content is particularly interesting to design and maintenance engineers who are working in offshore or onshore industry.
Download or read book Handbook of Offshore Engineering 2 volume set written by Subrata Chakrabarti and published by Elsevier. This book was released on 2005-06-21 with total page 1326 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Each chapter is written by one or more invited world-renowned experts * Information provided in handy reference tables and design charts* Numerous examples demonstrate how the theory outlined in the book is applied in the design of structuresTremendous strides have been made in the last decades in the advancement of offshore exploration and production of minerals. This book fills the need for a practical reference work for the state-of-the-art in offshore engineering. All the basic background material and its application in offshore engineering is covered. Particular emphasis is placed in the application of the theory to practical problems. It includes the practical aspects of the offshore structures with handy design guides, simple description of the various components of the offshore engineering and their functions. The primary purpose of the book is to provide the important practical aspects of offshore engineering without going into the nitty-gritty of the actual detailed design.· Provides all the important practical aspects of ocean engineering without going into the 'nitty-gritty' of actual design details·· Simple to use - with handy design guides, references tables and charts·· Numerous examples demonstrate how theory is applied in the design of structures
Download or read book Probabilistic Structural Mechanics Handbook written by C.R. Sundararajan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for a comprehensive book on probabilistic structural mechanics that brings together the many analytical and computational methods developed over the years and their applications in a wide spectrum of industries-from residential buildings to nuclear power plants, from bridges to pressure vessels, from steel structures to ceramic structures-became evident from the many discussions the editor had with practising engineers, researchers and professors. Because no single individual has the expertise to write a book with such a di.verse scope, a group of 39 authors from universities, research laboratories, and industries from six countries in three continents was invited to write 30 chapters covering the various aspects of probabilistic structural mechanics. The editor and the authors believe that this handbook will serve as a reference text to practicing engineers, teachers, students and researchers. It may also be used as a textbook for graduate-level courses in probabilistic structural mechanics. The editor wishes to thank the chapter authors for their contributions. This handbook would not have been a reality without their collaboration.
Download or read book Foundation Design Codes and Soil Investigation in View of International Harmonization and Performance Based Design written by Y. Honjo and published by CRC Press. This book was released on 2002-01-01 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions contained in these proceedings are divided into three main sections: theme lectures presented during the pre-workshop lecture series; keynote lectures and other contributed papers; and a translation of the Japanese geotechnical design code.
Download or read book Offshore Structures written by Mohamed A. El-Reedy and published by Gulf Professional Publishing. This book was released on 2012-07-17 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ultimate reference for selecting, operating and maintaining offshore structures, provides a road map for designing structures which will stand up even in the harshest environments. The selection of the proper type of offshore structure is discussed from a technical and economic point of view.
Download or read book Subsea Engineering Handbook written by Yong Bai and published by Gulf Professional Publishing. This book was released on 2018-11-15 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt: The offshore industry continues to drive the oil and gas market into deeper drilling depths, more advanced subsea systems, and cross into multiple disciplines to further technology and equipment. Engineers and managers have learned that in order to keep up with the evolving market, they must have an all-inclusive solution reference. Subsea Engineering Handbook, Second Edition remains the go-to source for everything related to offshore oil and gas engineering. Enhanced with new information spanning control systems, equipment QRA, electric tree structures, and manifold designs, this reference is still the one product engineers rely on to understand all components of subsea technology. Packed with new chapters on subsea processing and boosting equipment as well as coverage on newer valves and actuators, this handbook explains subsea challenges and discussions in a well-organized manner for both new and veteran engineers to utilize throughout their careers. Subsea Engineering Handbook, Second Edition remains the critical road map to understand all subsea equipment and technology. - Gain access to the entire spectrum of subsea engineering, including the very latest on equipment, safety, and flow assurance systems - Sharpen your knowledge with new content coverage on subsea valves and actuators, multiphase flow loop design, tree and manifold design as well as subsea control - Practice and learn with new real-world test examples and case studies
Download or read book Integrity of Offshore Structures written by D. Faulkner and published by CRC Press. This book was released on 2022-01-27 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the Fourth International Symposium on Integrity of Offshore Structures, 2-3 July 1990, Kelvin Conference Centre, University of Glasgow, Scotland organized by the Department of Naval Architecture and Ocean Engineering and Mechanical Engineering.
Download or read book Electrical Measuring Instruments and Measurements written by S.C. Bhargava and published by CRC Press. This book was released on 2012-12-27 with total page 1888 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, written for the benefit of engineering students and practicing engineers alike, is the culmination of the author's four decades of experience related to the subject of electrical measurements, comprising nearly 30 years of experimental research and more than 15 years of teaching at several engineering institutions. The unique feature of this book, apart from covering the syllabi of various universities, is the style of presentation of all important aspects and features of electrical measurements, with neatly and clearly drawn figures, diagrams and colour and b/w photos that illustrate details of instruments among other things, making the text easy to follow and comprehend. Enhancing the chapters are interspersed explanatory comments and, where necessary, footnotes to help better understanding of the chapter contents. Also, each chapter begins with a "recall" to link the subject matter with the related science or phenomenon and fundamental background. The first few chapters of the book comprise "Units, Dimensions and Standards"; "Electricity, Magnetism and Electromagnetism" and "Network Analysis". These topics form the basics of electrical measurements and provide a better understanding of the main topics discussed in later chapters. The last two chapters represent valuable assets of the book, and relate to (a) "Magnetic Measurements", describing many unique features not easily available elsewhere, a good study of which is essential for the design and development of most electric equipment – from motors to transformers and alternators, and (b) "Measurement of Non-electrical Quantities", dealing extensively with the measuring techniques of a number of variables that constitute an important requirement of engineering measurement practices. The book is supplemented by ten appendices covering various aspects dealing with the art and science of electrical measurement and of relevance to some of the topics in main chapters. Other useful features of the book include an elaborate chapter-by-chapter list of symbols, worked examples, exercises and quiz questions at the end of each chapter, and extensive authors' and subject index. This book will be of interest to all students taking courses in electrical measurements as a part of a B.Tech. in electrical engineering. Professionals in the field of electrical engineering will also find the book of use.
Download or read book Geotechnical and Geophysical Site Characterization 4 written by Roberto Quental Coutinho and published by CRC Press. This book was released on 2012-09-06 with total page 1888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Site characterization is a fundamental step towards the proper design, construction and long term performance of all types of geotechnical projects, ranging from foundation, excavation, earth dams, embankments, seismic hazards, environmental issues, tunnels, near and offshore structures. Geotechnical and Geophysical Site Characterization 4 provides practical applications of novel and innovative technologies in geotechnical and geophysical engineering, and is of interest to academics, engineers and professionals involved in Geotechnical Engineering.
Download or read book Fundamentals of Seismic Loading on Structures written by Tapan K. Sen and published by John Wiley & Sons. This book was released on 2009-04-29 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a practical guide to the basic essentials of earthquake engineering with a focus on seismic loading and structural design. Benefiting from the author’s extensive career in structural and earthquake engineering, dynamic analysis and lecturing, it is written from an industry perspective at a level suitable for graduate students. Fundamentals of Seismic Loading on Structures is organised into four major sections: introduction to earthquakes and related engineering problems, analysis, seismic loading, and design concepts. From a practical perspective, reviews linear and non-linear behaviour, introduces concepts of uniform hazard spectra, discusses loading provisions in design codes and examines soil-structure interaction issues, allowing the reader to quickly identify and implement information in a working environment. Discusses probabilistic methods that are widely employed in the assessment of seismic hazard, illustrating the use of Monte Carlo simulation with a number of worked examples. Summarises the latest developments in the field such as performance-based seismic engineering and advances in liquefaction research. “There are many books on earthquake engineering, but few are of direct use to the practising structural designer. This one, however, offers a new perspective, putting emphasis on the practical aspects of quantifying seismic loading, and explaining the importance of geotechnical effects during a major seismic event in readily understandable terms. The author has succeeded in marrying important seismological considerations with structural engineering practice, and this long-awaited book will find ready acceptance in the profession.” Professor Patrick J. Dowling CBE, DL, DSc, FIStructE, Hon MRIA, FIAE, FREng, FRS Chairman, British Association for the Advancement of Science Emeritus Professor and Retired Vice Chancellor, University of Surrey
Download or read book Tubular Structures written by Paul Grundy and published by Routledge. This book was released on 2021-09-30 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tubular structures remain a source of architectural inspiration and practical solutions to difficult performance specifications. New developments are covered in this text, which contains papers on design innovations and applications presented at an international symposium held in Australia in 1994.
Download or read book Probabilistic Risk and Hazard Assessment written by R.E. Melchers and published by Taylor & Francis. This book was released on 2022-04-19 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlights the multi-disciplinary nature of probabilistic risk and hazard assessment procedures. Topics covered include: Hazard scenario analyses (e.g. HAZOP, FMEA); probabilistic risk assessments; consequence modelling; structural reliability; human error; uncertainty analyses; and risk assessment. Topics are related to the design, construction & operation of chemical & process plants; nuclear facilities; bridges; buildings; offshore structures; dams.
Download or read book Marine Structural Design written by Yong Bai and published by Butterworth-Heinemann. This book was released on 2015-09-18 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine Structural Design, Second Edition, is a wide-ranging, practical guide to marine structural analysis and design, describing in detail the application of modern structural engineering principles to marine and offshore structures. Organized in five parts, the book covers basic structural design principles, strength, fatigue and fracture, and reliability and risk assessment, providing all the knowledge needed for limit-state design and re-assessment of existing structures. Updates to this edition include new chapters on structural health monitoring and risk-based decision-making, arctic marine structural development, and the addition of new LNG ship topics, including composite materials and structures, uncertainty analysis, and green ship concepts. - Provides the structural design principles, background theory, and know-how needed for marine and offshore structural design by analysis - Covers strength, fatigue and fracture, reliability, and risk assessment together in one resource, emphasizing practical considerations and applications - Updates to this edition include new chapters on structural health monitoring and risk-based decision making, and new content on arctic marine structural design
Download or read book Geomechanics of Marine Anchors written by Charles Aubeny and published by CRC Press. This book was released on 2017-09-18 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive guide for the analysis and design of anchor systems used for mooring offshore floating structures. Much of the experience is based on applications toward the offshore oil and gas industry, but the substantial potential for offshore renewable energy systems is addressed. The major types of anchors are described with respect to their basic design concept, advantages and limitations, appropriate framework for analysis, and observed performance. This book addresses all aspects of anchor behaviour related to anchor design including the installation performance, load capacity, deformation, and structural integrity of the anchor itself. Coverage is also provided of appurtenant components of anchor systems, in particular of anchor line/chain mechanics in the soil and water columns. Much of the material presented represents relatively new developments, including several new anchors which have been developed within the last decade, so the book will provide a useful compendium of information is largely scattered in journals and conference proceedings. This book is intended for engineers engaged in offshore geotechnics and marine engineers involved in mooring system and floating structure design. While the analytical methods presented in this text have a strong theoretical basis, the emphasis is on simplified computational formats accessible to design engineers.
Download or read book Ship Shaped Offshore Installations written by Jeom Kee Paik and published by Cambridge University Press. This book was released on 2022-02-17 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensively updated for the second edition, this handy guide covers the safety engineering of ship-shaped offshore installations at every stage of design, construction, operation, lifetime healthcare and decommissioning. New sections cover additional types of offshore structures, including offshore power plants, as well as cutting-edge technologies and all the latest advances in the field. The text focuses on minimising accidents and the effects of extreme conditions, with new chapters covering earthquakes, hurricanes and terrorist attacks, as well as traditional types of accidental events such as hull girder collapse, collisions, fires and explosions. This is an invaluable resource for students who will be approaching the subject for the first time as well as practising engineers and researchers.
