Download or read book Functional Fillers for Plastics written by Marino Xanthos and published by John Wiley & Sons. This book was released on 2010-01-07 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and up-to-date overview of the major mineral and organic fillers for plastics, their production, structure and properties, as well as their applications in terms of primary and secondary functions. Edited and co-authored by Professor Marino Xanthos with contributions by international experts from industry and academia, this book presents methods of mixing/incorporation technologies, surface treatments and modifications for enhanced functionality, an analysis of parameters affecting filler performance and a presentation of current and emerging applications. Additionally, the novel classification according to modification of specific polymer properties rather than filler chemical composition provides a better understanding of the relationships between processing, structure and properties of products containing functional fillers and the identification of new markets and applications. For engineers, scientists and technologists involved in the important sector of polymer composites.
Download or read book American Society of Composites 28th Technical Conference written by Charles Bakis and published by DEStech Publications, Inc. This book was released on 2013-11-01 with total page 1892 pages. Available in PDF, EPUB and Kindle. Book excerpt: New and unpublished U.S. and international research on multifunctional, active, biobased, SHM, self-healing composites -- from nanolevel to large structures New information on modeling, design, computational engineering, manufacturing, testing Applications to aircraft, bridges, concrete, medicine, body armor, wind energy This fully searchable CD-ROM contains 135 original research papers on all phases of composite materials. The document provides cutting edge research by US, Canadian, and Japanese authorities on matrix-based and fiber composites from design to damage analysis and detection. Major divisions of the work include: Structural Health Monitoring, Multifunctional Composites, Integrated Computational Materials Engineering, Interlaminar Testing, Analysis-Shell Structures, Thermoplastic Matrices, Analysis Non-classical Laminates, Bio-Based Composites, Electrical Properties, Dynamic Behavior, Damage/Failure, Compression-Testing, Active Composites, 3D Reinforcement, Dielectric Nanocomposites, Micromechanical Analysis, Processing, CM Reinforcement for Concrete, Environmental Effects, Phase-Transforming, Molecular Modeling, Impact.
Download or read book Plastics Process Analysis Instrumentation and Control written by Johannes Karl Fink and published by John Wiley & Sons. This book was released on 2021-03-02 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on plastics process analysis, instrumentation for modern manufacturing in the plastics industry. Process analysis is the starting point since plastics processing is different from processing of metals, ceramics, and other materials. Plastics materials show unique behavior in terms of heat transfer, fluid flow, viscoelastic behavior, and a dependence of the previous time, temperature and shear history which determines how the material responds during processing and its end use. Many of the manufacturing processes are continuous or cyclical in nature. The systems are flow systems in which the process variables, such as time, temperature, position, melt and hydraulic pressure, must be controlled to achieve a satisfactory product which is typically specified by critical dimensions and physical properties which vary with the processing conditions. Instrumentation has to be selected so that it survives the harsh manufacturing environment of high pressures, temperatures and shear rates, and yet it has to have a fast response to measure the process dynamics. At many times the measurements have to be in a non-contact mode so as not to disturb the melt or the finished product. Plastics resins are reactive systems. The resins will degrade if the process conditions are not controlled. Analysis of the process allows one to strategize how to minimize degradation and optimize end-use properties.
Download or read book Society of Plastics Engineers Annual Technical Conference written by Society of Plastics Engineers and published by . This book was released on 1976 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Processing and Finishing of Polymeric Materials 2 Volume Set written by Wiley and published by John Wiley & Sons. This book was released on 2012-12-03 with total page 1477 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative reference on the processing and finishing of polymeric materials for scientists and practitioners Owing to their versatility and wide range of applications, polymeric materials are of great commercial importance. Manufacturing processes of commercial products are designed to meet the requirements of the final product and are influenced by the physical and chemical properties of the polymeric material used. Based on Wiley's renowned Encyclopedia of Polymer Science and Technology, Processing and Finishing of Polymeric Materials provides comprehensive, up-to-date details on the latest manufacturing technologies, including blending, compounding, extrusion,molding, and coating. Written by prominent scholars from industry, academia, and research institutions from around the globe, this reference features more than forty selected reprints from the Encyclopedia as well as new contributions, providing unparalleled coverage of such topics as: Additives Antistatic agents Bleaching Blowing agents Calendaring Casting Coloring processes Dielectric heating Electrospinning Embedding Processing and Finishing of Polymeric Materials is an ideal resource for polymer and materials scientists, chemists, chemical engineers, materials scientists, process engineers, and consultants, and serves as a valuable addition to libraries of chemistry, chemical engineering, and materials science in industry, academia, and government.
Download or read book Particulate filled Polymer Composites written by Roger N. Rothon and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an updated version of the book first published in 1995. The use of particulate fillers in polymers has a long history, and they continue to play a very important role today. In the relatively short time since the publication of the first edition of this book, much has changed and all the chapters have been updated and revised, and a completely new chapter covering the latest developments in nano-filler technology is included. The aim of this book is to provide a guide to the fundamentals of the use of particulate fillers, which is accessible to people from the many different industries and disciplines who have an interest in the subject. Chapters cover: Selection and Use of Particulate Fillers Types of Particulate Filler Filler Surfaces and their Characterisation Surface Modification and Surface Modifiers Preparation and Mixture Characterisation of Mineral Filler Polymer Compounds Particulate Fillers as Flame Retardants Particulate Fillers in Elastomers Particulate Fillers in Thermoplastics Particulate Fillers in Thermosets Composites Using Nano-Fillers
Download or read book Engineered Materials Handbook Desk Edition written by ASM International. Handbook Committee and published by ASM International. This book was released on 1995-11-01 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference on the properties, selection, processing, and applications of the most widely used nonmetallic engineering materials. Section 1, General Information and Data, contains information applicable both to polymers and to ceramics and glasses. It includes an illustrated glossary, a collection of engineering tables and data, and a guide to materials selection. Sections 2 through 7 focus on polymeric materials--plastics, elastomers, polymer-matrix composites, adhesives, and sealants--with the information largely updated and expanded from the first three volumes of the Engineered Materials Handbook. Ceramics and glasses are covered in Sections 8 through 12, also with updated and expanded information. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Radiation Processing of Polymer Materials and Its Industrial Applications written by Keizo Makuuchi and published by John Wiley & Sons. This book was released on 2012-02-07 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text examines the effect of radiation on polymers and the versatility of its industrial applications. By helping readers understand and solve problems associated with radiation processing of polymers, it serves as an important reference and fills a gap in the literature. Radiation processing can significantly improve important properties of polymers, however, there are still misconceptions about processing polymers by using ionizing radiation. This book explains the radiation processing of polymeric materials used in many industrial products including cars, airplanes, computers, and TVs. It even addresses emerging "green" issues like biomaterials and hydrogels.
Download or read book The Science and Technology of Flexible Packaging written by Barry A. Morris and published by William Andrew. This book was released on 2022-07-23 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science and Technology of Flexible Packaging: Multilayer Films from Resin and Process to End Use, Second Edition provides a comprehensive guide on plastic films in flexible packaging, covering scientific principles, materials properties, processes and end use considerations. Sections discuss the science of multilayer films in a concise and impactful way, presenting the fundamental understanding required to improve product design, material selection and processes. In addition, the book includes information on why one material is favored over another and how film or coating affects material properties. Descriptions and analysis of key properties of packaging films are provided from engineering and scientific perspectives. With essential scientific insights, best practice techniques, environmental sustainability information and key principles of structure design, this book provides information aids in material selection and processing, how to shorten development times and deliver stronger products, and ways to enable engineers and scientists to deliver superior products with reduced development time and cost. - Provides essential information on all aspects of multilayer films in flexible packaging, including processing, properties, materials and end use - Bridges the gap between scientific principles and practical challenges - Includes explanations to assist practitioners in overcoming challenges - Enables the reader to address new challenges, such as design for sustainability and eCommerce
Download or read book Plastics Additives and Modifiers Handbook written by Jesse Edenbaum and published by Springer. This book was released on 1992-03-26 with total page 1144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the basic principles of the four compoundable plastic families, and concentrates on the additives and modifiers needed to make high-volume thermoplastics perform in various applications over a wide range of processes, products, temperature ranges and environmental conditions.
Download or read book Plastics World written by and published by . This book was released on 1984 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SAMPE Quarterly written by Society of Aerospace Material and Process Engineers and published by . This book was released on 1973 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemicals and Fuels from Bio Based Building Blocks written by Fabrizio Cavani and published by John Wiley & Sons. This book was released on 2016-02-16 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date and two volume overview of recent developments in the field of chemocatalytic and enzymatic processes for the transformation of renewable material into essential chemicals and fuels. Experts from both academia and industry discuss catalytic processes currently under development as well as those already in commercial use for the production of bio-fuels and bio-based commodity chemicals. As such, they cover drop-in commodity chemicals and fuels, as well as bio-based monomers and polymers, such as acrylic acid, glycols, polyesters and polyolefins. In addition, they also describe reactions applied to waste and biomass valorization and integrated biorefining strategies. With its comprehensive coverage of the topic, this is an indispensable reference for chemists working in the field of catalysis, industrial chemistry, sustainable chemistry, and polymer synthesis.
Download or read book Conference Proceedings written by Society of Plastics Engineers. Technical Conference and published by . This book was released on 1999 with total page 1234 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Science Technology Index written by and published by . This book was released on 1996 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASM Handbook written by ASM International. Handbook Committee and published by ASM International(OH). This book was released on 1990 with total page 1334 pages. Available in PDF, EPUB and Kindle. Book excerpt: These volumes cover the properties, processing, and applications of metals and nonmetallic engineering materials. They are designed to provide the authoritative information and data necessary for the appropriate selection of materials to meet critical design and performance criteria.
Download or read book Dividends from Wood Research written by and published by . This book was released on 1992 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
