Download or read book Annular Two Phase Flow written by Geoffrey Hewitt and published by Elsevier. This book was released on 2013-10-22 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annular Two-Phase Flow presents the wide range of industrial applications of annular two-phase flow regimes. This book discusses the fluid dynamics and heat transfer aspects of the flow pattern. Organized into 12 chapters, this book begins with an overview of the classification of the various types of interface distribution observed in practice. This text then examines the various regimes of two-phase flow with emphasis on the regions of occurrence of the annular flow regime. Other chapters consider the single momentum and energy balances, which illustrate the differences and analogies between single- and two-phase flows. This book discusses as well the simple modes for annular flow with consideration to the calculation of the profile of shear stress in the liquid film. The final chapter deals with the techniques that are developed for the measurement of flow pattern, entrainment, and film thickness. This book is a valuable resource for chemical engineers.
Download or read book Measuring Techniques in Gas Liquid Two Phase Flows written by J.M. Delhaye and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: A IUTAM symposium on "Measuring Techniques in Gas-Liquid Two Phase Flows" was held on July 5-8, 1983 in Nancy, France. This topic in cluded instrumentation for steam-water and liquid-vapor flows but strictly excluded measuring techniques for gas or liquid flows with solid particles. The top priority in the paper selection was given to presentations of new methods which had been substantiated by theoretical modeling, calibration tests and comparison tests with other techniques. Examples of experimental resul ts obtained with the proposed instrumentation had to be displayed. However the interpretation of these results in terms of two-phase flow or heat transfer modeling did not fall wi thin the scope of the meeting. Thirty four papers were presented during the Symposium and 79 participants coming from Canada, European countries, Japan and the United States attended the sessions. They represented not only Universities but also state agencies and private companies. After the meeting each paper was peer-reviewed by at least three referees. The Editors of this Procee dings Volume are pleased to extend their deep gratitude to the following reviewers: J.L. Achard, R.J. Adrian, B. Azzopardi, J.A. Boure, G. Costigan, M. Courtaud, A.E. Dukler, F. Durst, J.R. Fincke, G. Gouesbet, P. Griffith, T.J. Hanratty, A. Hawighorst, T.R. Heidrick, G. Hetsroni, Y.Y. Hsu, M.
Download or read book Modelling and Experimentation in Two Phase Flow written by Volfango Bertola and published by Springer. This book was released on 2014-05-04 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an up-to-date review of recent advances in the study of two-phase flows, with focus on gas-liquid flows, liquid-liquid flows, and particle transport in turbulent flows. The book is divided into several chapters, which after introducing basic concepts lead the reader through a more complex treatment of the subjects. The reader will find an extensive review of both the older and the more recent literature, with abundance of formulas, correlations, graphs and tables. A comprehensive (though non exhaustive) list of bibliographic references is provided at the end of each chapter. The volume is especially indicated for researchers who would like to carry out experimental, theoretical or computational work on two-phase flows, as well as for professionals who wish to learn more about this topic.
Download or read book Multiphase Flow Dynamics 2 written by Nikolay Ivanov Kolev and published by Springer Science & Business Media. This book was released on 2005-08-15 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-phase flows are part of our natural environment such as tornadoes, typhoons, air and water pollution and volcanic activities as well as part of industrial technology such as power plants, combustion engines, propulsion systems, or chemical and biological industry. The industrial use of multi-phase systems requires analytical and numerical strategies for predicting their behavior. In its third extended edition this book contains theory, methods and practical experience for describing complex transient multi-phase processes in arbitrary geometrical configurations. This book provides a systematic presentation of the theory and practice of numerical multi-phase fluid dynamics. In the present second volume the mechanical and thermal interactions in multiphase dynamics are provided. This third edition includes various updates, extensions, improvements and corrections.
Download or read book Effect of Pipe Diameter on Horizontal Annular Two phase Flow written by Lawrence Robert Williams and published by . This book was released on 1990 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of pipe diameter on horizontal annular flow is examined. Measurements of the local film height, the local droplet flux, the local velocity, and the entrained fraction for annular flow in a 9.53 cm horizontal pipe have been obtained. The measurements are compared with the results from previous investigators for horizontal annular flow in pipes with diameters of 2.54 cm and 5.08 cm. A new large scale two-phase flow facility has been designed and constructed. The facility has the ability to incline a 26.5 m pipe at angles between positive and minus 2.5 degrees from the horizontal. Local film height measurements show that the film distribution becomes increasingly asymmetric with increasing pipe diameter. The effect of pipe diameter on the asymmetries of the liquid film distribution is predicted approximately by a Froude number. At Froude numbers below 50, the liquid is stratified as a pool at the pipe bottom. A turbulent diffusion model developed by a co-researcher for the droplet concentration distribution is in good agreement with measurements at low gas velocities and low droplet concentrations. At higher droplet concentrations, velocity measurements suggest the existence of a secondary flow in the gas which inhibits droplet settling. Entrainment correlations developed from experiments in small diameter pipes, over predict the entrained fraction in large diameter pipes. A generalized entrainment correlation based on an equilibrium rate balance between the rate of atomization of droplets from the liquid film and the rate of deposition of droplets back to the liquid film is developed. The correlation is easily interpreted for two extremes of the liquid film distribution. When the film is distributed uniformly around the pipe wall, the entrainment relation reduces to a form developed by previous researchers. For conditions where the liquid film is stratified as a pool at the pipe bottom, a new entrainment relation is developed which is in good agreement with the results.
Download or read book Measurement of Two Phase Flow Parameters written by Geoffrey Frederick Hewitt and published by . This book was released on 1978 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia Of Two phase Heat Transfer And Flow I Fundamentals And Methods A 4 volume Set written by John R Thome and published by World Scientific. This book was released on 2015-08-14 with total page 1109 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the two-set series is to present a very detailed and up-to-date reference for researchers and practicing engineers in the fields of mechanical, refrigeration, chemical, nuclear and electronics engineering on the important topic of two-phase heat transfer and two-phase flow. The scope of the first set of 4 volumes presents the fundamentals of the two-phase flows and heat transfer mechanisms, and describes in detail the most important prediction methods, while the scope of the second set of 4 volumes presents numerous special topics and numerous applications, also including numerical simulation methods.Practicing engineers will find extensive coverage to applications involving: multi-microchannel evaporator cold plates for electronics cooling, boiling on enhanced tubes and tube bundles, flow pattern based methods for predicting boiling and condensation inside horizontal tubes, pressure drop methods for singularies (U-bends and contractions), boiling in multiport tubes, and boiling and condensation in plate heat exchangers. All of these chapters include the latest methods for predicting not only local heat transfer coefficients but also pressure drops.Professors and students will find this 'Encyclopediaa of Two-Phase Heat Transfer and Flow' particularly exciting, as it contains authored books and thorough state-of-the-art reviews on many basic and special topics, such as numerical modeling of two-phase heat tranfser and adiabatic bubbly and slug flows, the unified annular flow boiling model, flow pattern maps, condensation and boiling theories, new emerging topics, etc.
Download or read book Atomization and Deposition Rates in Vertical Annular Two phase Flow written by Suzanne A. Schadel and published by . This book was released on 1994 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Local Liquid Velocity Measurements in Horizontal Annular Two phase Flow written by Charles R. Kopplin and published by . This book was released on 2004 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the International Symposium on Two Phase Systems written by G. Hetsroni and published by Elsevier. This book was released on 2017-05-04 with total page 779 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the International Symposium on Two-Phase Systems
Download or read book Flow Measurement written by Gustavo Urquiza and published by BoD – Books on Demand. This book was released on 2012-03-28 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Flow Measurement book comprises different topics. The book is divided in four sections. The first section deals with the basic theories and application in microflows, including all the difficulties that such phenomenon implies. The second section includes topics related to the measurement of biphasic flows, such as separation of different phases to perform its individual measurement and other experimental methods. The third section deals with the development of various experiments and devices for gas flow, principally air and combustible gases. The last section presents 2 chapters on the theory and methods to perform flow measurements indirectly by means on pressure changes, applied on large and small flows.
Download or read book Fluid Structure Interactions written by Michael P. Paidoussis and published by Academic Press. This book was released on 2013-12-07 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of two books concentrating on the dynamics of slender bodies within or containing axial flow, Fluid-Structure Interaction, Volume 1 covers the fundamentals and mechanisms giving rise to flow-induced vibration, with a particular focus on the challenges associated with pipes conveying fluid. This volume has been thoroughly updated to reference the latest developments in the field, with a continued emphasis on the understanding of dynamical behaviour and analytical methods needed to provide long-term solutions and validate the latest computational methods and codes. In this edition, Chapter 7 from Volume 2 has also been moved to Volume 1, meaning that Volume 1 now mainly treats the dynamics of systems subjected to internal flow, whereas in Volume 2 the axial flow is in most cases external to the flow or annular. - Provides an in-depth review of an extensive range of fluid-structure interaction topics, with detailed real-world examples and thorough referencing throughout for additional detail - Organized by structure and problem type, allowing you to dip into the sections that are relevant to the particular problem you are facing, with numerous appendices containing the equations relevant to specific problems - Supports development of long-term solutions by focusing on the fundamentals and mechanisms needed to understand underlying causes and operating conditions under which apparent solutions might not prove effective
Download or read book An Overview of Heat Transfer Phenomena written by Salim Newaz Kazi and published by IntechOpen. This book was released on 2012-10-31 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the wake of energy crisis due to rapid growth of industries, urbanization, transportation, and human habit, the efficient transfer of heat could play a vital role in energy saving. Industries, household requirements, offices, transportation are all dependent on heat exchanging equipment. Considering these, the present book has incorporated different sections related to general aspects of heat transfer phenomena, convective heat transfer mode, boiling and condensation, heat transfer to two phase flow and heat transfer augmentation by different means.
Download or read book Proceedings of the Dynamic Flow Conference 1978 on Dynamic Measurements in Unsteady Flows written by L.S.G. Kovasznay and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1041 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1985 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiphase Flow Handbook written by Efstathios Michaelides and published by CRC Press. This book was released on 2016-10-26 with total page 1421 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Multiphase Flow Handbook, Second Edition is a thoroughly updated and reorganized revision of the late Clayton Crowe’s work, and provides a detailed look at the basic concepts and the wide range of applications in this important area of thermal/fluids engineering. Revised by the new editors, Efstathios E. (Stathis) Michaelides and John D. Schwarzkopf, the new Second Edition begins with two chapters covering fundamental concepts and methods that pertain to all the types and applications of multiphase flow. The remaining chapters cover the applications and engineering systems that are relevant to all the types of multiphase flow and heat transfer. The twenty-one chapters and several sections of the book include the basic science as well as the contemporary engineering and technological applications of multiphase flow in a comprehensive way that is easy to follow and be understood. The editors created a common set of nomenclature that is used throughout the book, allowing readers to easily compare fundamental theory with currently developing concepts and applications. With contributed chapters from sixty-two leading experts around the world, the Multiphase Flow Handbook, Second Edition is an essential reference for all researchers, academics and engineers working with complex thermal and fluid systems.
Download or read book Monthly Catalogue United States Public Documents written by and published by . This book was released on 1983 with total page 1054 pages. Available in PDF, EPUB and Kindle. Book excerpt:
