Download or read book Laser Annealing Processes in Semiconductor Technology written by Fuccio Cristiano and published by Woodhead Publishing. This book was released on 2021-04-21 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Annealing Processes in Semiconductor Technology: Theory, Modeling and Applications in Nanoelectronics synthesizes the scientific and technological advances of laser annealing processes for current and emerging nanotechnologies. The book provides an overview of the laser-matter interactions of materials and recent advances in modeling of laser-related phenomena, with the bulk of the book focusing on current and emerging (beyond-CMOS) applications. Reviewed applications include laser annealing of CMOS, group IV semiconductors, superconducting materials, photonic materials, 2D materials. This comprehensive book is ideal for post-graduate students, new entrants, and experienced researchers in academia, research and development in materials science, physics and engineering. - Introduces the fundamentals of laser materials and device fabrication methods, including laser-matter interactions and laser-related phenomena - Addresses advances in physical modeling and in predictive simulations of laser annealing processes such as atomistic modeling and TCAD simulations - Reviews current and emerging applications of laser annealing processes such as CMOS technology and group IV semiconductors
Download or read book Recrystallization and Related Annealing Phenomena written by F.J. Humphreys and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes.The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher.The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.
Download or read book Handbook of Metallurgical Process Design written by George E. Totten and published by CRC Press. This book was released on 2004-05-25 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviewing an extensive array of procedures in hot and cold forming, casting, heat treatment, machining, and surface engineering of steel and aluminum, this comprehensive reference explores a vast range of processes relating to metallurgical component design-enhancing the production and the properties of engineered components while reducing manufacturing costs. It surveys the role of computer simulation in alloy design and its impact on material structure and mechanical properties such as fatigue and wear. It also discusses alloy design for various materials, including steel, iron, aluminum, magnesium, titanium, super alloy compositions and copper.
Download or read book Engineering Materials and Processes written by George Bamford Ashe and published by . This book was released on 1926 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annealing of 22 40 and 158 MeV Proton Damage in N and P type Silicon written by Marvin Eddleman Beatty and published by . This book was released on 1969 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Selected Proceedings from the 232nd ECS Meeting National Harbor MD Fall 2017 written by Abbott and published by The Electrochemical Society. This book was released on 2017-12-22 with total page 1616 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Euromat 99 Microstructures Mechanical Properties and Processes written by Yves Bréchet and published by John Wiley & Sons. This book was released on 2000-07-13 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: The relation between microstructures and mechanical properties has always been a challenge for materials science. Modelling the formation, properties and long term stability of microstructures is one of the most impressive and promising advances of modern materials science. This book presents recent advances and challenges in this fast evolving cross disciplinary field. It addresses applications of classical physical metallurgy, and the need for new modelling approaches, both on the analytical viewpoint and on the simulation side.
Download or read book A Study of the Short Time Annealing of Cold Worked Zirconium written by D. E. Johnson and published by . This book was released on 1956 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recrystallization and Related Annealing Phenomena written by Anthony Rollett and published by Newnes. This book was released on 2017-07-24 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recrystallization and Related Annealing Phenomena, Third Edition, fulfills the information needs of materials scientists in both industry and academia. The subjects treated in the book are all active research areas, forming a major part of at least four regular international conference series. This new third edition ensures the reader has access to the latest findings, and is essential reading to those working in the forefront of research in universities and laboratories. For those in industry, the book highlights applications of the research and technology, exploring, in particular, the significant progress made recently in key areas such as deformed state, including deformation to very large strains, the characterization of microstructures by electron backscatter diffraction, the modeling and simulation of annealing, and continuous recrystallization. - Includes over 50% of new, revised, and updated material, highlighting the significant recent literature results in grain growth in non-crystallizing systems, 3D characterization techniques, quantitative modeling techniques, and all-new appendices on texture and measurements - Contains synthesized, detailed coverage from leading authors that bridge the gap between theory and practice - Includes a critical level of synthesis and pedagogy with an authored rather than edited volume
Download or read book Laser Annealing of Semiconductors written by J Poate and published by Elsevier. This book was released on 2012-12-02 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Annealing of Semiconductors deals with the materials science of surfaces that have been subjected to ultrafast heating by intense laser or electron beams. This book is organized into 13 chapters that specifically tackle transient annealing of compound semiconductors. After briefly dealing with an overview of laser annealing, this book goes on discussing the concepts of solidification and crystallization pertinent to the field. These topics are followed by discussions on the main mechanisms of interaction of photon and electron beams with condensed matter; the calculation of thermophysical properties of crystalline materials; and high-speed crystal growth by laser annealing of ion-implanted silicon. The subsequent chapters describe the microstructural and topographical properties of annealed semiconductor layers and the epitaxy of ion-implanted silicon irradiated with a laser or electron beam single pulse. This text also explores the electronic and surface properties and the continuous-wave beam processing of semiconductors. The concluding chapters cover various reactions in metal-semiconductor systems, such as fast and laser-induced melting, solidification, mixing, and quenching. Laser-induced interactions in metal-semiconductor systems and the factors involved in control of the heat treatment process are also discussed in these chapters. Materials scientists and researchers and device engineers will find this book invaluable.
Download or read book Handbook of Deposition Technologies for Films and Coatings written by Peter M. Martin and published by William Andrew. This book was released on 2009-12-01 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 3e, edited by Peter M. Martin, PNNL 2005 Inventor of the Year, is an extensive update of the many improvements in deposition technologies, mechanisms, and applications. This long-awaited revision includes updated and new chapters on atomic layer deposition, cathodic arc deposition, sculpted thin films, polymer thin films and emerging technologies. Extensive material was added throughout the book, especially in the areas concerned with plasma-assisted vapor deposition processes and metallurgical coating applications.
Download or read book SCR written by and published by . This book was released on 1966 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Science and Engineering written by William D. Callister and published by John Wiley & Sons. This book was released on 2019-01-03 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machinery and Production Engineering written by and published by . This book was released on 1923 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process and Device Simulation for MOS VLSI Circuits written by P. Antognetti and published by Springer Science & Business Media. This book was released on 1983-04-30 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute on Process and Device Simulation for MOS-VLSI Circuits, Sogesta, Urbino, Italy, July 12-23, 1982
Download or read book Temperature Measurement during Millisecond Annealing written by Denise Reichel and published by Springer. This book was released on 2016-01-07 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Denise Reichel studies the delicate subject of temperature measurement during lamp-based annealing of semiconductors, in particular during flash lamp annealing. The approach of background-correction using amplitude-modulated light to obtain the sample reflectivity is reinvented from rapid thermal annealing to apply to millisecond annealing. The author presents a new method independent of the lamp operation to obtain this amplitude modulation and derives a formula to describe the process. Further, she investigates the variables of the formula in depth to validate the method’s suitability for background-corrected temperature measurement. The experimental results finally proof its power for elevated temperatures.
Download or read book A Textbook of Production Technology Manufacturing Processes written by P C Sharma and published by S. Chand Publishing. This book was released on 2007 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: The printing of the seventh edition of the book has provided the author with an opportunity to completely go through the text.Minor Additions and Improvements have been carried out,wherever needed.All the figure work has been redone on computer,with the result that all the figures are clear and sharp.The author is really thankful to M/s S.Chand & Company Ltd. for doing an excellent job in publishing the latest edition of the book.
