Download or read book Rock Anisotropy and the Theory of Stress Measurements written by Bernard Amadei and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Any undisturbed rock mass is subject to natural stresses inclu ding gravitational stresses due to the mass of the overburden and possibly tectonic stresses due to the straining of the earth's crust and remanent stresses due to past tectonism. Knowledge of the in situ stress field must be integrated into any rock engineering design along with general rock mass characteristics such as de for mability, strength, permeability and time dependent behavior. For example, the choice of optimum orientation and shape of deep underground caverns or complex underground works will be controlled by the orientation and the magnitude of the in situ stress @ield if it is necessary to minimize stress concentration problems. Long term variation of the in situ stress field may also help to evaluate the potential hazard of earthquake occurences. The magnitude and orientation of the stress field ata point within a rock mass can be measured but there is no known method by which the state of stress at a point can be accurately determined by instruments located remotely. In general, measurements are made inside boreholes, on outcrops or on the internal surfaces of under ground cavities. Most of the measuring techniques intentionally disturb the state of stress in the rock and then measure consequent strains and displacements. Measured strains or displacements are then related to the stresses through assumptions of material behavior. A common procedure is to assume that the rock mass is linearly elastic, isotropic, continuous and homogeneous.
Download or read book Seismic Anisotropy in the Earth written by V. Babuska and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Anisotropy and Microseismics Theory and Practice written by Vladimir Grechka and published by SEG Books. This book was released on 2020-08-01 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Takes readers on a path of discovery of rarely examined wave phenomena and their possible usage. Chapters begin by formulating a question, followed by explanations of what is exciting about it, where the mystery might lie, and what could be the potential value of answering the question.
Download or read book Anisotropy and Localization of Plastic Deformation written by J.P. Boehler and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: Present developments in materials science, mechanics and engineering, as well as the demands of modern technology, result in a new and growing interest in plasticity and in bordering domains of the mechanical behavior of materials. This growing interest is attested to by the success of both The International Journal of Plasticity, which after its inception rapidly became the leading journal for plasticity research, and the series ofInternational Symposia on Plasticity and Its Current Applications, which is now the premier international forum for plasticity research dissemination. The First International Symposium on Plasticity and Its Current Applications was conceived and organized by Professor Akhtar S. Khan, and was held at the University of Oklahoma (Norman, Oklahoma, USA) from July 30 to August 3, 1984. It was attended by over one hundred scientists from fifteen countries. "Plasticity '89: the Second International Symposium on Plasticity and Its Current Applications" was held at Mie University (Tsu, Japan) from July 31 to August 4, 1989; this symposium was co-chaired by Professors Khan and Tokuda. The main emphasis of this meeting was on dynamic plasticity and micromechanics, although it included other aspects of plasticity as well. It was attended by over two hundred researchers from twenty-three nations.
Download or read book Properties of Materials written by Robert E. Newnham and published by Oxford University Press on Demand. This book was released on 2005 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensors, matrices, symmetry, and structure-property relationships form the main subjects of the book. While tensors and matrices provide the mathematical framework for understanding anistropy, on which the physical and chemical properties of crystals and textured materials often depend, atomistic arguments are also needed to qualify the property coefficients in various directions. The atomistic arguments are partly based on symmetry and party on the basic physics and chemistry of materials.
Download or read book Texture and Anisotropy written by U. F. Kocks and published by Cambridge University Press. This book was released on 2000-08-15 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: A successful book covering an important area of materials science, now available in paperback.
Download or read book Mechanics of Anisotropic Materials written by Jacek J. Skrzypek and published by Springer. This book was released on 2015-05-09 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is focused on constitutive description of mechanical behaviour of engineering materials: both conventional (polycrystalline homogeneous isotropic or anisotropic metallic materials) and non-conventional (heterogeneous multicomponent anisotropic composite materials). Effective material properties at the macro-level depend on both the material microstructure (originally isotropic or anisotropic) as well as dissipative phenomena occurred on fabrication and consecutive loading phase (hardening) resulting in irreversible microstructure changes (acquired anisotropy). The material symmetry is a background and anisotropy is a core around which the book is formed. In this way a revision of classical rules of enhanced constitutive description of materials is required.
Download or read book Anisotropic Elasticity written by Paolo Vannucci and published by Springer. This book was released on 2017-07-10 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a modern and unconventional introduction to anisotropy. The first part presents a general description of Anisotropic Elasticity theories while the second part focuses on the polar formalism: the theoretical bases and results are completely developed along with applications to design problems of laminated anisotropic structures. The book is based on lectures on anisotropy which have been held at Ecole Polytechnique in Paris.
Download or read book Anisotropic 2D Materials and Devices written by Yuerui Lu and published by Royal Society of Chemistry. This book was released on 2022-09-23 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting recent progress in anisotropic 2D materials research, reader is introduced to phosphorene and its arsenic alloys, monochalcogenides of group IV elements in the form of MX (M = Ge, Sn and X = S, Se, Te), low-symmetry transition-metal dichalcogenide (TMD) materials such as rhenium disulphide (ReS2) and rhenium diselenide (ReSe2), and organic 2D materials. Providing detailed synthesis protocols and characterization techniques for these various anisotropic 2D materials, readers will learn their specific technological scopes for next generation electronics, optoelectronics and biomedical applications, challenges and future directions. Edited by an leading expert, contributors cover enhanced many-body interactions and high binding energy 1D particle dynamics to showcase design of high-performance optoelectronic devices; anisotropic polariton for designing polariton based laser systems; applications in bio-imaging, cancer diagnosis and therapies, drug delivery and release, and antibacterial performance; and finally, their potential in nano-electro-mechanical devices. Considering all these areas in detail, this book is a useful reference to the scientific communities working in related research fields, especially for materials scientists, chemists, physicists and electronics/electrical/energy engineers. This book may also be of use to those in chemical academia and industry more broadly.
Download or read book Mechanical Behavior of Anisotropic Solids Comportment M chanique des Solides Anisotropes written by J.P. Boehler and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1978, the European Mechanics Committee and the French Centre National de la Recherche Scientifique agreed to the organization of an Interna tional Colloquium on the "Mechanical Behavior of Anisotropic Solids". The meeting was held at Villard-de-Lans (near Grenoble, France) from 19th to 22 nd June 1979. The Colloquium considered mechanical aspects of the anisotropy of solids, both initial and induced by permanent deformation, anisotropic hardening and damage, oriented fissuration, etc. Topics concerned mathematical, experimental and engineering aspects of the anisotropy of metals, composites, soils and rocks. The aim of the Colloquium was to bring together experimentalists, theoretecians and engineers interested in various features of mechanical anisotropy, in order to permit an interdisciplinary exchange of understanding, experience and methods. A detailed description of the scope, aim and proposed topics is contained in the Preface. The announcement of the Colloquium attracted a large number of sub mitted contributions. Conforming with the principles of Euromech Colloquia and of the Colloques Internationaux du CNRS, the accepted contributions were limited to 50 communications. A general description of the scientific program is to be found in the Preface. Five general lectures gave state-of-the-art reports concerning some areas of the behavior of anisotropic solids; the 50 communications were divided into 12 sessions dealing with specific topics (see "Contents"). In order to facilitate subsequent contact between the reader and the contributors, full addresses are given in the "List of Authors."
Download or read book Seismology of Azimuthally Anisotropic Media and Seismic Fracture Characterization written by I. D. T︠S︡vankin and published by SEG Books. This book was released on 2011 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an analysis of seismic signatures for azimuthally anisotropic media and shows anisotropic inversion/processing methods for wide-azimuth reflection data and VSP surveys. The focus is kinematic parameter-estimation techniques; the prestack amplitudes section includes AVO and attenuation coefficients; field examples are included.
Download or read book Seismic Signatures and Analysis of Reflection Data in Anisotropic Media written by I. Tsvankin and published by Elsevier. This book was released on 2005-06-13 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the breakthrough in the last decade in identifying the key parameters for time and depth imaging in anisotropic media and developing practical methodologies for estimating them from seismic data, Seismic Signatures and Analysis of Reflection Data in Anisotropic Media primarily focuses on the far reaching exploration benefits of anisotropic processing. This volume provides the first comprehensive description of reflection seismic signatures and processing methods in anisotropic media. It identifies the key parameters for time and depth imaging in transversely isotropic media and describes practical methodologies for estimating them from seismic data. Also, it contains a thorough discussion of the important issues of uniqueness and stability of seismic velocity analysis in the presence of anisotropy. The book contains a complete description of anisotropic imaging methods, from the theoretical background to algorithms to implementation issues. Numerous applications to synthetic and field data illustrate the improvements achieved by the anisotropic processing and the possibility of using the estimated anisotropic parameters in lithology discrimination. Focuses on the far reaching exploration benefits of anisotropic processing First comprehensive description of reflection seismic signatures and processing methods in anisotropic media
Download or read book Anisotropic Behaviour of Damaged Materials written by Jacek J. Skrzypek and published by Springer Science & Business Media. This book was released on 2012-11-27 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of this book is based on the keynote lectures delivered during the Inter national Symposium on Anisotropic Behaviour of Damaged Materials ABDM, held in Krakow-Przegorzaiy, Poland, September 9-11, 2002. The Symposium was organized by the Solid Mechanics Division of the Institute of Mechanics and Machine Design - Cracow University of Technology, under aus pices of the Dean of the Faculty of Mechanical Engineering, Cracow University of Technology, Prof. S. Michalowski. The Co-organizers of the ABDM Symposium were: • Martin-Luther-Universitat Halle-Wittenberg, • Centre of Excellence for Advanced Materials and Structures AMAS at the In stitute of Fundamental Technological Research of the Polish Academy of Sci ences, Warsaw, • Committee of Mechanics of the Polish Academy of Sciences, Warsaw. Ten chapters of this book in their present form essentially exceed lectures de livered at the Symposium. They should rather be read as not only author's recent achievements in the field, but also the state of art and synthesis done by the lead ers in the mechanics community. The mixed formula of the Symposium, namely: the invited lectures and presentations of the original papers by the participants was used. 23 original papers, published in the Symposium Proceedings on CD, exhaust the full scope of the ABDM Symposium. The present book provides a survey of various damage models focusing on the damage response in anisotropic materials as well as damage-induced anisotropy.
Download or read book Modeling of Anisotropic Electromagnetic Reflection from Sea Ice written by Kenneth M. Golden and published by . This book was released on 1980 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Plastic Anisotropy in Single Crystals and Polycrystalline Metals written by Wojciech Truszkowski and published by Springer Science & Business Media. This book was released on 2001-03-31 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph deals with the plastic anisotropy described by the strain ratio, its physical meaning and technological aspects. The method of precise determination of the instability of crystallographic orientation in deformed imperfect single crystals is presented; it may be considered the essential factor in the analysis of deformation texture in polycrystals. The book is meant to be of help to those engaged in fundamental research and technology of plastic working, suggesting new useful methods and effective procedures.
Download or read book Magnetic Anisotropy of Rocks written by D. Tarling and published by Springer Science & Business Media. This book was released on 1993-05-31 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the background, physical instrumentation and geological aspects behind any study of the magnetic anisotropy of a rock in a comprehensive and practical way. After studying this book, readers in the geosciences will be encouraged to use this simple, rapid and inexpensive technique in their studies of rocks.
Download or read book Anisotropic Elastic Plates written by Chyanbin Hwu and published by Springer Science & Business Media. This book was released on 2010-05-25 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: As structural elements, anisotropic elastic plates find wide applications in modern technology. The plates here are considered to be subjected to not only inplane load but also transverse load. In other words, both plane and plate bending problems as well as the stretching-bending coupling problems are all explained in this book. In addition to the introduction of the theory of anisotropic elasticity, several important subjects have are discussed in this book such as interfaces, cracks, holes, inclusions, contact problems, piezoelectric materials, thermoelastic problems and boundary element analysis.
