Download or read book Anisotropic Doubly Curved Shells written by Francesco Tornabene and published by Società Editrice Esculapio. This book was released on 2019-11-01 with total page 1199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to present in depth several Higher-order Shear Deformation Theories (HSDTs) by means of a unified approach for the mechanical analysis of doubly-curved shell structures made of anisotropic and composite materials. In particular, the strong and weak formulations of the corresponding governing equations are discussed and illustrated. The approach presented in this volume is completely general and represents a valid tool to investigate the structural behavior of many arbitrarily shaped structures. An isogeometric mapping procedure is also illustrated to this aim. Special attention is given also to advanced and innovative constituents, such as Carbon Nanotubes (CNTs), Variable Angle Tow (VAT) composites and Functionally Graded Materials (FGMs). In addition, several numerical applications are developed to support the theoretical models. Accurate, efficient and reliable numerical techniques able to approximate both derivatives and integrals are presented, which are respectively the Differential Quadrature (DQ) and Integral Quadrature (IQ) methods. Finally, two numerical techniques, named Strong Formulation Finite Element Method (SFEM) and Weak Formulation Finite Element Method (WFEM), are developed to deal with multi-element domains characterized by arbitrary shapes and discontinuities.
Download or read book Hygro Thermo Magneto Electro Elastic Theory of Anisotropic Doubly Curved Shells written by Francesco Tornabene and published by Società Editrice Esculapio. This book was released on 2023-10-13 with total page 1073 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to present in depth several Higher-order Shear Deformation Theories (HSDTs) by means of a unified approach for studying the Hygro-Thermo-Magneto-Electro- Elastic Theory of Anisotropic Doubly-Curved Shells. In particular, a general coupled multifield theory regarding anisotropic shell structures is provided. The three-dimensional multifield problem is reduced in a two-dimensional one following the principles of the Equivalent Single Layer (ESL) approach and the Equivalent Layer-Wise (ELW) approach, setting a proper configuration model. According to the adopted configuration assumptions, several Higher-order Shear Deformation Theories (HSDTs) are obtained. Furthermore, the strong and weak formulations of the corresponding governing equations are discussed and illustrated. The approach presented in this volume is completely general and represents a valid tool to investigate the physical behavior of many arbitrarily shaped structures. An isogeometric mapping procedure is also illustrated to this aim. Special attention is given also to advanced and innovative constituents, such as Carbon Nanotubes (CNTs), Variable Angle Tow (VAT) composites and Functionally Graded Materials (FGMs). In addition, several numerical applications are used to support the theoretical models. Accurate, efficient and reliable numerical techniques able to approximate both derivatives and integrals are considered, which are respectively the Differential Quadrature (DQ) and Integral Quadrature (IQ) methods. The Theory of Composite Thin Shells is derived in a simple and intuitive manner from the theory of thick and moderately thick shells (First-order Shear Deformation Theory or Reissner- Mindlin Theory). In particular, the Kirchhoff-Love Theory and the Membrane Theory for composite shells are shown. Furthermore, the Theory of Composite Arches and Beams is also exposed. In particular, the equations of the Timoshenko Theory and the Euler-Bernoulli Theory are directly deducted from the equations of singly-curved shells of translation and of plates.
Download or read book Laminated Composite Doubly Curved Shell Structures written by Francesco Tornabene and published by Società Editrice Esculapio. This book was released on 2016-05-17 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: The title, “Laminated Composite Doubly-Curved Shell Structures. Differential al Geometry and Higher-order Theories” illustrates the theme treated and the prospective followed during the composition of the present work. The aim of this manuscript is to analyze the static and dynamic behavior of thick and moderately thick composite shells through the application of the Differential Quadrature (DQ) method. The book is divided into two volumes wherein the principal higher order structural theories are illustrated in detail and the mechanical behavior of doubly-curved structures are presented by several static and dynamic numerical applications. In particular, the first volume is mainly theoretical, whereas the second one is mainly related to the numerical DQ technique and its applications in the structural field. The starting point to analyze higher-order structural theories is given by the so-called Unified Formulation (UF), which allows to consider and study several kinematic models in a unified manner. Both the Equivalent Single Layer (ESL) and Layer-Wise (LW) approaches are presented. A particular attention is paid to composite materials, due to their increasing development and use in many engineering fields during the last years.
Download or read book Theory of Laminated Composite Doubly Curved Shell Structures written by Francesco Tornabene and published by Società Editrice Esculapio. This book was released on 2017-01-09 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manuscript comes from the experience gained over thirteen years of study and research on shell structures. The title, Theory of Laminated Composite Doubly-Curved Shell Structures, illustrates the theme followed in the present volume. The present study aims to analyze the static and dynamic behavior of moderately thick shells made of composite materials. A particular attention is paid, other than fibrous and laminated composites, also to “Functionally graded materials” (FGMs). They are non-homogeneous materials, characterized by a continuous varia on of the mechanical properties through a particular direction. In particular, the present manuscript was written as an attempt to show, in an easy way, the theoretical aspects of doubly-curved composite shell structures. Furthermore, it focuses only on the theoretical aspects related to laminated composite doubly-curved shell structures and represents a shortened version of the book entitled: Mechanics of Laminated Composite Doubly-Curved Shell Structures by the same authors, wherein also the numerical part has been presented. The present volume is aimed at Master degree and PhD students in structural and applied mechanics, as well as experts in these fields. The present volume is divided into six chapters, in which static and dynamic analyses of several structural elements are provided in detail. Furthermore, the results of the adopted numerical technique are presented for several problems such as different loading and boundary conditions.
Download or read book Vibration of Laminated Shells and Plates written by Mohamad Subhi Qatu and published by Elsevier. This book was released on 2004-02-16 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibrations drive many engineering designs in today's engineering environment. There has been an enormous amount of research into this area of research over the last decade. This book documents some of the latest research in the field of vibration of composite shells and plates filling a much-needed gap in the market. Laminated composite shells have many engineering applications including aerospace, mechanical, marine and automotive engineering. This book makes an ideal reference for researchers and practicing engineers alike. - The first book of its kind - Documents 10 years of research in the field of composite shells - Many Engineering applications
Download or read book Mechanics of Laminated Composite Doubly Curved Shell Structures written by Francesco Tornabene and published by Società Editrice Esculapio. This book was released on 2021-12-01 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manuscript comes from the experience gained over ten years of study and research on shell structures and on the Generalized Differential Quadrature method. The title, Mechanics of Laminated Composite Doubly-Curved Shell Structures, illustrates the theme followed in the present volume. The present study aims to analyze the static and dynamic behavior of moderately thick shells made of composite materials through the application of the Differential Quadrature (DQ) technique. A particular attention is paid, other than fibrous and laminated composites, also to “Functionally Graded Materials” (FGMs). They are non-homogeneous materials, characterized by a continuous variation of the mechanical properties through a particular direction. The GDQ numerical solution is compared, not only with literature results, but also with the ones supplied and obtained through the use of different structural codes based on the Finite Element Method (FEM). Furthermore, an advanced version of GDQ method is also presented. This methodology is termed Strong Formulation Finite Element Method (SFEM) because it employs the strong form of the differential system of equations at the master element level and the mapping technique, proper of FEM. The connectivity between two elements is enforced through compatibility conditions.
Download or read book Shell and Spatial Structures written by Stefano Gabriele and published by Springer Nature. This book was released on 2023-12-04 with total page 931 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects the latest advances, innovations, and applications in the field of shell and spatial structures, as presented by leading international researchers at the 2nd Italian Workshop on Shell and Spatial Structures (IWSS), held in Turin, Italy on June 26-28, 2023. The conference was meant to give an overview on experimental and theoretical studies, analysis methods and approaches for the design, computational form finding, structural optimization, manufacturing, testing and maintenance techniques and historical reviews of all types of shell and spatial structures. These include, but are not limited to, tension and membrane structures, framed and lattice structures, gridshells and active-bending structures, shell roofs, tensegrity structures, pneumatic and inflatable structures, active and deployable structures, concrete, metal, masonry, timber and bio-based, spatial structures. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
Download or read book Mechanics of laminated Composite doubly curvel shell structures written by Francesco Tornabene and published by Società Editrice Esculapio. This book was released on 2014-03-01 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manuscript comes from the experience gained over ten years of study and research on shell structures and on the Generalized Differential Quadrature method. The title, Mechanics of Laminated Composite Doubly-Curved Shell Structures, illustrates the theme followed in the present volume. The present study aims to analyze the static and dynamic behavior of moderately thick shells made of composite materials through the application of the Differential Quadrature (DQ) technique. A particular attention is paid, other than fibrous and laminated composites, also to “Functionally Graded Materials” (FGMs). They are non-homogeneous materials, characterized by a continuous variation of the mechanical properties through a particular direction. The GDQ numerical solution is compared, not only with literature results, but also with the ones supplied and obtained through the use of different structural codes based on the Finite Element Method (FEM). Furthermore, an advanced version of GDQ method is also presented. This methodology is termed Strong Formulation Finite Element Method (SFEM) because it employs the strong form of the differential system of equations at the master element level and the mapping technique, proper of FEM. The connectivity between two elements is enforced through compatibility conditions.
Download or read book Structural Vibration written by Guoyong Jin and published by Springer. This book was released on 2015-03-09 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops a uniform accurate method which is capable of dealing with vibrations of laminated beams, plates and shells with arbitrary boundary conditions including classical boundaries, elastic supports and their combinations. It also provides numerous solutions for various configurations including various boundary conditions, laminated schemes, geometry and material parameters, which fill certain gaps in this area of reach and may serve as benchmark solutions for the readers. For each case, corresponding fundamental equations in the framework of classical and shear deformation theory are developed. Following the fundamental equations, numerous free vibration results are presented for various configurations including different boundary conditions, laminated sequences and geometry and material properties. The proposed method and corresponding formulations can be readily extended to static analysis.
Download or read book Nanomechanics of Structures and Materials written by Krzysztof Kamil Żur and published by Elsevier. This book was released on 2024-08-01 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomechanics of Structures and Materials highlights and compares the advantages and disadvantages of diverse modeling and analysis techniques across a wide spectrum of different nanostructures and nanomaterials. It focuses on the behavior of media with nanostructural features where the classic continuum theory ceases to hold and augmented continuum theories such as nonlocal theory, gradient theory of elasticity, and the surface elasticity model should be adopted. These generalized frameworks, tailored to address the intricate characteristics inherent at the nanoscale level, are discussed in depth, and their application to a variety of different materials and structures, including graphene, shells, arches, nanobeams, carbon nanotubes, porous materials, and more, is covered. Key Features Outlines the advantages and limitations of size-dependent continuum theories and modeling techniques when studying fundamental problems in the nanomechanics of structures and materials Discusses various analytical and numerical tools for identifying nanomechanical defects in structures Explores a diverse array of structures and materials, including graphene, shells, arches, nanobeams, carbon nanotubes, and porous materials
Download or read book Proceedings of the International Conference of Steel and Composite for Engineering Structures written by Brahim Benaissa and published by Springer Nature. This book was released on with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theoretical and Applied Mechanics written by Mario Di Paola and published by Materials Research Forum LLC. This book was released on 2023-04-25 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the proceedings of the XXV National Congress of the Italian Association of Theoretical and Applied Mechanics (Palermo, September 2022). The topics cover theoretical, computational, experimental and technical-applicative aspects. Chapters: Fluid Mechanics, Solid Mechanics, Structural Mechanics, Mechanics of Machine, Computational Mechanics, Biomechanics, Masonry Modelling and Analysis, Dynamical Systems in Civil and Mechanical Structures, Control and Experimental Dynamics, Mechanical Modelling of Metamaterials and Periodic Structures, Novel Stochastic Dynamics, Signal Processing Techniques for Civil Engineering Applications, Vibration-based Monitoring and Dynamic Identification of Historic Constructions, Modeling and Analysis of Nanocomposites and Small-Scale Structures, Gradient Flows in Mechanics and Continuum Physics, Multibody Systems Vibration Analysis, Mechanics of Renewable Energy Systems, Mathematical Modeling and Experimental Techniques for Quantification and Prediction of Fluid Dynamic Noise, and Advanced Process Mechanics. Keywords: Fluid Mechanics, Solid Mechanics, Structural Mechanics, Mechanics of Machine, Computational Mechanics, Biomechanics, Masonry Modelling and Analysis, Dynamical Systems in Civil and Mechanical Structures, Control and Experimental Dynamics, Mechanical Modelling of Metamaterials and Periodic Structures, Novel Stochastic Dynamics, Signal Processing Techniques for Civil Engineering Applications, Vibration-based Monitoring and Dynamic Identification of Historic Constructions, Modeling and Analysis of Nanocomposites and Small-Scale Structures, Gradient Flows in Mechanics and Continuum Physics, Multibody Systems Vibration Analysis, Mechanics of Renewable Energy Systems, Mathematical Modeling and Experimental Techniques for Quantification and Prediction of Fluid Dynamic Noise, and Advanced Process Mechanics.
Download or read book Frattura ed Integrit Strutturale Annals 2014 written by Luca Susmel and published by Gruppo Italiano Frattura. This book was released on 2014-09-12 with total page 1208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theoretical Analyses Computations and Experiments of Multiscale Materials written by Ivan Giorgio and published by Springer Nature. This book was released on 2022-05-03 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the 60th birthday of the Prof. Francesco dell’Isola, who is known for his long-term contribution in the field of multiscale materials. It contains several contributions from researchers in the field, covering theoretical analyses, computational aspects and experiments.
Download or read book The Weather and Climate written by Shaun Lovejoy and published by Cambridge University Press. This book was released on 2013-04-04 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new method of modeling the atmosphere, synthesizing data analysis techniques and multifractal statistics, for atmospheric researchers and graduate students.
Download or read book Generalized Differential and Integral Quadrature written by Francesco Tornabene and published by Società Editrice Esculapio. This book was released on 2023-10-17 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main aim of this book is to analyze the mathematical fundamentals and the main features of the Generalized Differential Quadrature (GDQ) and Generalized Integral Quadrature (GIQ) techniques. Furthermore, another interesting aim of the present book is to shown that from the two numerical techniques mentioned above it is possible to derive two different approaches such as the Strong and Weak Finite Element Methods (SFEM and WFEM), that will be used to solve various structural problems and arbitrarily shaped structures. A general approach to the Differential Quadrature is proposed. The weighting coefficients for different basis functions and grid distributions are determined. Furthermore, the expressions of the principal approximating polynomials and grid distributions, available in the literature, are shown. Besides the classic orthogonal polynomials, a new class of basis functions, which depend on the radial distance between the discretization points, is presented. They are known as Radial Basis Functions (or RBFs). The general expressions for the derivative evaluation can be utilized in the local form to reduce the computational cost. From this concept the Local Generalized Differential Quadrature (LGDQ) method is derived. The Generalized Integral Quadrature (GIQ) technique can be used employing several basis functions, without any restriction on the point distributions for the given definition domain. To better underline these concepts some classical numerical integration schemes are reported, such as the trapezoidal rule or the Simpson method. An alternative approach based on Taylor series is also illustrated to approximate integrals. This technique is named as Generalized Taylor-based Integral Quadrature (GTIQ) method. The major structural theories for the analysis of the mechanical behavior of various structures are presented in depth in the book. In particular, the strong and weak formulations of the corresponding governing equations are discussed and illustrated. Generally speaking, two formulations of the same system of governing equations can be developed, which are respectively the strong and weak (or variational) formulations. Once the governing equations that rule a generic structural problem are obtained, together with the corresponding boundary conditions, a differential system is written. In particular, the Strong Formulation (SF) of the governing equations is obtained. The differentiability requirement, instead, is reduced through a weighted integral statement if the corresponding Weak Formulation (WF) of the governing equations is developed. Thus, an equivalent integral formulation is derived, starting directly from the previous one. In particular, the formulation in hand is obtained by introducing a Lagrangian approximation of the degrees of freedom of the problem. The need of studying arbitrarily shaped domains or characterized by mechanical and geometrical discontinuities leads to the development of new numerical approaches that divide the structure in finite elements. Then, the strong form or the weak form of the fundamental equations are solved inside each element. The fundamental aspects of this technique, which the author defined respectively Strong Formulation Finite Element Method (SFEM) and Weak Formulation Finite Element Method (WFEM), are presented in the book.
Download or read book Anisotropic Finite Elements Local Estimates and Applications written by Thomas Apel and published by . This book was released on 1999-07 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:
