Download or read book Advances in Damage Mechanics Metals and Metal Matrix Composites written by George Voyiadjis and published by Elsevier. This book was released on 2012-12-02 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in a single and unified volume a clear and thorough presentation of the recent advances in continuum damage mechanics for metals and metal matrix composites. Emphasis is placed on the theoretical formulation of the different constitutive models in this area, but sections are added to demonstrate the applications of the theory. In addition, some sections contain new material that has not appeared before in the literature. The book is divided into three major parts: Part I deals with the scalar formulation and is limited to the analysis of isotropic damage in materials; Parts II and III deal with the tensor formulation and is applied to general states of deformation and damage. The material appearing in this text is limited to plastic deformation and damage in ductile materials (e.g. metals and metal matrix composites) but excludes many of the recent advances made in creep, brittle fracture, and temperature effects since the authors feel that these topics require a separate volume for this presentation. Furthermore, the applications presented in this book are the simplest possible ones and are mainly based on the uniaxial tension test.
Download or read book Advances in Damage Mechanics Metals and Metal Matrix Composites With an Introduction to Fabric Tensors written by George Voyiadjis and published by Elsevier. This book was released on 2010-07-07 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the principles of Damage Mechanics along with the latest research findings. Both isotropic and anisotropic damage mechanisms are presented. Various damage models are presented coupled with elastic and elasto-plastic behavior. The book includes two chapters that are solely dedicated to experimental investigations conducted by the authors. In its last chapter, the book presents experimental data for damage in composite materials that appear in the literature for the first time.· Systematic treatment of damage mechanics in composite materials· Includes special and advanced topics· Includes basic principles of damage mechanics· Includes new experimental data that appears in print for the first time· Covers both metals and metal matrix composite materials· Includes new chapters on fabric tensors· Second edition includes four new chapters
Download or read book Damage Mechanics in Engineering Materials written by Jiann-Wen Woody Ju and published by Elsevier. This book was released on 1998-03-04 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains thirty peer-reviewed papers that are based on the presentations made at the symposium on "Damage Mechanics in Engineering Materials" on the occasion of the Joint ASME/ASCE/SES Mechanics Conference (McNU97), held in Evanston, Illinois, June 28-July 2, 1997. The key area of discussion was on the constitutive modeling of damage mechanics in engineering materials encompassing the following topics: macromechanics/micromechanical constitutive modeling, experimental procedures, numerical modeling, inelastic behavior, interfaces, damage, fracture, failure, computational methods. The book is divided into six parts: Study of damage mechanics. Localization and damage. Damage in brittle materials. Damage in metals and metal matrix composites. Computational aspects of damage models. Damage in polymers and elastomers.
Download or read book Inelasticity and Micromechanics of Metal Matrix Composites written by George Voyiadjis and published by Elsevier. This book was released on 2017-05-04 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains fifteen papers based on the presentations made at the symposium on "Inelasticity and Micromechanics of Metal Matrix Composites" held at the University of Washington, USA, in mid-1994. The papers represent the most recent work conducted on inelasticity and micromechanics of metal matrix composites. The book is divided into two parts: Part I deals with the study of inelastic deformation in metal matrix composites, while Part II tackles the micromechanical aspects of metal matrix composites. The articles discuss different aspects of these two topics ranging from purely theoretical treatments to extensive experimental investigations. Many of the papers are by prominent researchers working in this area.
Download or read book Ceramic Matrix Composites written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2014-10-27 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive source of information on various aspects of ceramic matrix composites (CMC). It covers ceramic and carbon fibers; the fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration and joining. Each chapter in the book is written by specialists and internationally renowned researchers in the field. This book will provide state-of-the-art information on different aspects of CMCs. The book will be directed to researchers working in industry, academia, and national laboratories with interest and professional competence on CMCs. The book will also be useful to senior year and graduate students pursuing degrees in ceramic science and engineering, materials science and engineering, aeronautical, mechanical, and civil or aerospace engineering. Presents recent advances, new approaches and discusses new issues in the field, such as foreign object damage, life predictions, multiscale modeling based on probabilistic approaches, etc. Caters to the increasing interest in the application of ceramic matrix composites (CMC) materials in areas as diverse as aerospace, transport, energy, nuclear, and environment. CMCs are considered ans enabling technology for advanced aeropropulsion, space propulsion, space power, aerospace vehicles, space structures, as well as nuclear and chemical industries. Offers detailed descriptions of ceramic and carbon fibers; fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration/joining.
Download or read book Damage Mechanics written by George Z. Voyiadjis and published by CRC Press. This book was released on 2005-06-23 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Before a structure or component can be completed, before any analytical model can be constructed, and even before the design can be formulated, you must have a fundamental understanding of damage behavior in order to produce a safe and effective design. Damage Mechanics presents the underlying principles of continuum damage mechanics along with the
Download or read book Multiscale Modelling of Damage and Fracture Processes in Composite Materials written by Tomasz Sadowski and published by Springer Science & Business Media. This book was released on 2007-03-23 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores damage growth and fracture processes in cementitious, ceramic, polymer and metal matrix composites, integrating properties like stiffness and strength with observation at below macroscopic scale. Advances in multiscale modelling and analysis pertain directly to materials which either have a range of relevant microstructural scales, like metals, or do not have a well-defined microstructure, like cementitious or ceramic composites.
Download or read book Continuum Damage Mechanics written by Sumio Murakami and published by Springer Science & Business Media. This book was released on 2012-02-24 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in engineering and technology have brought about serious and enlarged demands for reliability, safety and economy in wide range of fields such as aeronautics, nuclear engineering, civil and structural engineering, automotive and production industry. This, in turn, has caused more interest in continuum damage mechanics and its engineering applications. This book aims to give a concise overview of the current state of damage mechanics, and then to show the fascinating possibility of this promising branch of mechanics, and to provide researchers, engineers and graduate students with an intelligible and self-contained textbook. The book consists of two parts and an appendix. Part I is concerned with the foundation of continuum damage mechanics. Basic concepts of material damage and the mechanical representation of damage state of various kinds are described in Chapters 1 and 2. In Chapters 3-5, irreversible thermodynamics, thermodynamic constitutive theory and its application to the modeling of the constitutive and the evolution equations of damaged materials are descried as a systematic basis for the subsequent development throughout the book. Part II describes the application of the fundamental theories developed in Part I to typical damage and fracture problems encountered in various fields of the current engineering. Important engineering aspects of elastic-plastic or ductile damage, their damage mechanics modeling and their further refinement are first discussed in Chapter 6. Chapters 7 and 8 are concerned with the modeling of fatigue, creep, creep-fatigue and their engineering application. Damage mechanics modeling of complicated crack closure behavior in elastic-brittle and composite materials are discussed in Chapters 9 and 10. In Chapter 11, applicability of the local approach to fracture by means of damage mechanics and finite element method, and the ensuing mathematical and numerical problems are briefly discussed. A proper understanding of the subject matter requires knowledge of tensor algebra and tensor calculus. At the end of this book, therefore, the foundations of tensor analysis are presented in the Appendix, especially for readers with insufficient mathematical background, but with keen interest in this exciting field of mechanics.
Download or read book Scalar Damage and Healing Mechanics written by George Z. Voyiadjis and published by Elsevier. This book was released on 2022-10-03 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scalar Damage and Healing Mechanics outlines the latest cutting-edge research in the field of scalar damage and healing mechanics, providing step-by-step insight on how to use scalar damage variables in various modeling scenarios. Additionally, the book discusses the latest advances in healing mechanics, covering the evolution of healing and damage, small damage and small healing, healing processes in series and in parallel, super healing, and the thermodynamics of damage and healing. Coupled systems, in which damage triggers self-healing as well as a decoupled system where healing occurs after damage is identified by external detection, are also discussed. Readers are additionally introduced to fundamental concepts such as effective stress, damage evolution, plane stress damage decomposition, and other damage processes that form the basis for a better understanding of the more advanced chapters. - Synthesizes the latest research in damage mechanics and the healing mechanics of materials, including thermodynamics, elasticity and plasticity - Includes practical exercises and problems for readers to work with before performing their own modeling scenarios - Covers various scalar damage variables and outlines different damage processes
Download or read book Applications of Continuum Damage Mechanics to Fatigue and Fracture written by David L. McDowell and published by ASTM International. This book was released on 1997 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers from the May 1996 Symposium on Applications of Continuum Damage Mechanics (CDM) to Fatigue and Fracture. Papers in Section I deal with various aspects of modeling damage in composite materials, such as high temperature environmental degradation, fatigue, and viscous damage in metal a
Download or read book Multiscale Modeling and Simulation of Composite Materials and Structures written by Young W. Kwon and published by Springer Science & Business Media. This book was released on 2007-10-23 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in multiscale modeling and simulation techniques for composite materials and structures. It focuses on the structural and functional properties of engineering composites and the sustainable high performance of components and structures. The multiscale techniques can be also applied to nanocomposites which are important application areas in nanotechnology. There are few books available on this topic.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Damage and Failure of Composite Materials written by Ramesh Talreja and published by Cambridge University Press. This book was released on 2012-06-07 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together materials mechanics and modelling, this book provides a complete guide to damage mechanics of composite materials for engineers.
Download or read book Creep and Damage in Materials and Structures written by Holm Altenbach and published by Springer. This book was released on 2014-05-04 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook gives a concise survey of constitutive and structural modeling for high temperature creep, damage, low – cycle fatigue and other inelastic conditions. The book shows the creep and continuum damage mechanics as rapidly developing discipline which interlinks the material science foundations, the constitutive modeling and computer simulation application to analysis and design of simple engineering components. It is addressed to young researchers and scientists working in the field of mechanics of inelastic, time-dependent materials and structures, as well as to PhD students in computational mechanics, material sciences, mechanical and civil engineering.
Download or read book Continuum Damage Mechanics and Numerical Applications written by Wohua Zhang and published by Springer Science & Business Media. This book was released on 2010-11-19 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Continuum Damage Mechanics and Numerical Applications" presents a systematic development of the theory of Continuum Damage Mechanics and its numerical engineering applications using a unified form of the mathematical formulations in anisotropic and isotropic damage models. The theoretical framework is based on the thermodynamic theory of energy and material dissipation and is described by a set of fundamental formulations of constitutive equations of damaged materials, development equations of the damaged state, and evolution equations of micro-structures. According to concepts of damage-dissipation of the material state and effective evolution of material properties, all these advanced equations, which take nonsymmetrized effects of damage aspects into account, are developed and modified from the traditional general failure models so they are more easily applied and verified in a wide range of engineering practices by experimental testing. Dr. Wohua Zhang is a Professor at Engineering Mechanics Research Center in Zhejiang University of China. Dr. Yuanqiang Cai is a Professor at Department of Civil Engineering in Zhejiang University of China.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comprehensive Structural Integrity written by Ian Milne and published by Elsevier. This book was released on 2003-07-25 with total page 4647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this major reference work is to provide a first point of entry to the literature for the researchers in any field relating to structural integrity in the form of a definitive research/reference tool which links the various sub-disciplines that comprise the whole of structural integrity. Special emphasis will be given to the interaction between mechanics and materials and structural integrity applications. Because of the interdisciplinary and applied nature of the work, it will be of interest to mechanical engineers and materials scientists from both academic and industrial backgrounds including bioengineering, interface engineering and nanotechnology. The scope of this work encompasses, but is not restricted to: fracture mechanics, fatigue, creep, materials, dynamics, environmental degradation, numerical methods, failure mechanisms and damage mechanics, interfacial fracture and nano-technology, structural analysis, surface behaviour and heart valves. The structures under consideration include: pressure vessels and piping, off-shore structures, gas installations and pipelines, chemical plants, aircraft, railways, bridges, plates and shells, electronic circuits, interfaces, nanotechnology, artificial organs, biomaterial prostheses, cast structures, mining... and more. Case studies will form an integral part of the work.
