Download or read book Aniline Production from Benzene Cost Analysis Aniline E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Aniline production from benzene, nitric acid and hydrogen. The process examined is similar to Dupont's liquid phase nitrobenzene hydrogenation process. In this process, benzene is initially nitrated to mononitrobenzene (MNB) intermediate. Then, the MNB is hydrogenated to Aniline in a liquid-phase hydrogenation reactor. This report was developed based essentially on the following reference(s): Keywords: Huntsman, Chematur, Bechamp, DuPont, KBR

Download or read book Aniline Production from Nitrobenzene Cost Analysis Aniline E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Aniline production from nitrobenzene and hydrogen. The process examined is similar to BASF's vapor phase nitrobenzene hydrogenation process. This report was developed based essentially on the following reference(s): Keywords: Bayer, Borsodchem, Sinopec

Download or read book Aniline Production from Nitrobenzene Cost Analysis Aniline E13A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Aniline production from nitrobenzene and hydrogen The process examined is a liquid phase nitrobenzene hydrogenation technology. This report was developed based essentially on the following reference(s): (1) WO Patent 2015118059, issued to Chematur Technologies in 2015 (2) US Patent 4185036, issued to DuPont in 1980 Keywords: Chematur, Dupont, Huntsman, Bechamp, Phenylamine, Aminobenzene, Benzenamine

Download or read book Aniline Production from Phenol Cost Analysis Aniline E31A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Aniline production from phenol. The process examined is a typical phenol ammonolysis process. This report was developed based essentially on the following reference(s): Keywords: Ammonolysis, Halcon, Aristech

Download or read book Benzene Production from Reformate Cost Analysis Benzene E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Benzene production from reformate. The process examined is a typical sulfolane liquid-liquid extraction process. In this process, sulfolane is the solvent used in the extraction process. Toluene and mixed xylenes are generated as by-products. This report was developed based essentially on the following reference(s): "Benzene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Shell, UOP, Axens, Liquid-Liquid Solvent Extraction, BTX Distillation, Aromatics, Tetramethylene Sulfone, Tetrahydrothiophene-1,1-Dioxide, LLE

Download or read book Maleic Anhydride Production from Benzene Cost Analysis MAN E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Maleic Anhydride production from benzene. In this process, Maleic Anhydride is produced by the reaction of benzene with oxygen carried out in a fixed bed reactor. The reactor effluent is sent to an aqueous-based recovery system for Maleic Anhydride separation. This report was developed based essentially on the following reference(s): "Maleic Anhydride, Maleic Acid, and Fumaric Acid", Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition Keywords: Fixed Bed, Maleic Acid Anhydride, Benzene Oxidation, Aqueous Recovery, Halcon, Scientific Design

Download or read book Paracetamol Production from Nitrobenzene Cost Analysis Paracetamol E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Paracetamol production from nitrobenzene, hydrogen, and acetic anhydride. In this process, nitrobenzene is contacted with hydrogen in the presence of sulfuric acid, generating 4-aminophenol and aniline by-product. The aminophenol is recovered by distillation and further reacted with acetic anhydride to produce crude Paracetamol, which is further purified. This report was developed based essentially on the following reference(s): Keywords: Acetaminophen, APAP, Acamol, Abensanil, Nitrobenzene, p-aminophenol, PAP, Mallinckrodt

Download or read book Linear Alkylbenzene Sulfonate Production Cost Analysis LAS E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Linear Alkylbenzene Sulfonate (LAS) production from linear alkylbenzene (LAB) and sulfur. The process examined is a conventional sulfonation process. This report was developed based essentially on the following reference(s): Keywords: Sulfur, Sulfur Trioxide, LABS

Download or read book Styrene Production from Propylene Ethylbenzene Cost Analysis Styrene E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Styrene production from chemical grade (CG) propylene and ethylbenzene. The process examined is a propylene oxide/styrene monomer (POSM) process similar to LyondellBasell technology. In this process, ethylbenzene is oxidized to produce ethylbenzene hydroperoxide, which reacts with propylene to produce Styrene and propylene oxide products. This report was developed based essentially on the following reference(s): "Propylene Oxide", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Propene, Ethylbenzol, Oxidation, Epoxidation, EBHP, Phenylethene, POSM

Download or read book Chemical Reaction Engineering written by Octave Levenspiel and published by John Wiley & Sons. This book was released on 1998-09-01 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical reaction engineering is concerned with the exploitation of chemical reactions on a commercial scale. It's goal is the successful design and operation of chemical reactors. This text emphasizes qualitative arguments, simple design methods, graphical procedures, and frequent comparison of capabilities of the major reactor types. Simple ideas are treated first, and are then extended to the more complex.

Download or read book Quantitative Chemical Analysis written by Daniel C. Harris and published by Macmillan Higher Education. This book was released on 2015-05-29 with total page 998 pages. Available in PDF, EPUB and Kindle. Book excerpt: The gold standard in analytical chemistry, Dan Harris’ Quantitative Chemical Analysis provides a sound physical understanding of the principles of analytical chemistry and their applications in the disciplines

Download or read book Advanced Organic Chemistry written by Reinhard Bruckner and published by Academic Press. This book was released on 2002 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: A best-selling mechanistic organic chemistry text in Germany, this text's translation into English fills a long-existing need for a modern, thorough and accessible treatment of reaction mechanisms for students of organic chemistry at the advanced undergraduate and graduate level. Knowledge of reaction mechanisms is essential to all applied areas of organic chemistry; this text fulfills that need by presenting the right material at the right level.

Download or read book Clay Polymer Nanocomposites written by Khouloud Jlassi and published by Elsevier. This book was released on 2017-07-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay–Polymer Nanocomposites is a complete summary of the existing knowledge on this topic, from the basic concepts of synthesis and design to their applications in timely topics such as high-performance composites, environment, and energy issues. This book covers many aspects of synthesis such as in- situ polymerization within the interlamellar spacing of the clays or by reaction of pristine or pre-modified clays with reactive polymers and prepolymers. Indeed, nanocomposites can be prepared at industrial scale by melt mixing. Regardless the synthesis method, much is said in this book about the importance of theclay pre-modification step, which is demonstrated to be effective, on many occasions, in obtaining exfoliated nanocomposites. Clay–Polymer Nanocomposites reports the background to numerous characterization methods including solid state NMR, neutron scattering, diffraction and vibrational techniques as well as surface analytical methods, namely XPS, inverse gas chromatography and nitrogen adsorption to probe surface composition, wetting and textural/structural properties. Although not described in dedicated chapters, numerous X-ray diffraction patterns of clay–polymer nanocomposites and reference materials are displayed to account for the effects of intercalation and exfoliations of layered aluminosilicates. Finally, multiscale molecular simulation protocols are presenting for predicting morphologies and properties of nanostructured polymer systems with industrial relevance. As far as applications are concerned, Clay–Polymer Nanocomposites examines structural composites such as clay–epoxy and clay–biopolymers, the use of clay–polymer nanocomposites as reactive nanocomposite fillers, catalytic clay-(conductive) polymers and similar nanocomposites for the uptake of hazardous compounds or for controlled drug release, antibacterial applications, energy storage, and more. The most comprehensive coverage of the state of the art in clay–polymer nanocomposites, from synthesis and design to opportunities and applications Covers the various methods of characterization of clay–polymer nanocomposites - including spectroscopy, thermal analyses, and X-ray diffraction Includes a discussion of a range of application areas, including biomedicine, energy storage, biofouling resistance, and more

Download or read book QSAR in Environmental Toxicology II written by K.L. Kaiser and published by Springer Science & Business Media. This book was released on 1987-10-31 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few years, research in the field of quantitative structure-activity relationships (QSAR) in chemistry, biology, pharmacology, toxicology, and environmental sciences has seen strong growth. New journals and books have appeared in each of these fields, however, the combination of QSAR and environmental sciences is still in its infancy. After the success of the Workshop on Quantitative Structure-Activity Relationships (QSAR) in Environmental Toxicology, held at McMaster University, Aug ust 16-18, 1983, with the proceedings publ ished in 1984 [QSA R in Environmental Toxicology, Kaiser, K. L. E. (Ed. ), D. Reidel Pub!. Co. , Dordrecht, 406 p. , ISBN 90-277 -1776-1], it was time to hold another workshop in 1986. Indeed, the response by the scientific community was excellent with over 50 participants from Canada, Germany, Great Britain, Hungary, India, Japan, The Netherlands, United States, and Yugoslavia. Moreover, both breadth and depth of papers given were significantly improved and the workshop discussions were intense and frank. Regrettably, the number of participants, number of papers given and submitted for these proceedings made it impossible to include the workshop discussions of these papers. However, several manuscripts were revised on the basis of these discussions and, therefore, do reflect this very interactive workshop. This volume presents the majority of papers given at the 2nd International Workshop on QSAR in Environmental Toxicology, held at McMaster University, June 9-13, 1986. Many of these papers contain primary, new scientific data, equations and results which will not appear elsewhere.

Download or read book Handbook of Biomaterial Properties written by William Murphy and published by Springer. This book was released on 2016-06-11 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides tabular and text data relating to normal and diseased tissue materials and materials used in medical devices. Comprehensive and practical for students, researchers, engineers, and practicing physicians who use implants, this book considers the materials aspects of both implantable materials and natural tissues and fluids. Examples of materials and topics covered include titanium, elastomers, degradable biomaterials, composites, scaffold materials for tissue engineering, dental implants, sterilization effects on material properties, metallic alloys, and much more. Each chapter author considers the intrinsic and interactive properties of biomaterials, as well as their appropriate applications and historical contexts. Now in an updated second edition, this book also contains two new chapters on the cornea and on vocal folds, as well as updated insights, data, and citations for several chapters.

Download or read book Laboratory Techniques in Thrombosis a Manual written by J. Jespersen and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of this manual appeared in 1992 and was entitled ECAT Assay Procedures. It was the result of a unique cooperation between experts brought together by the European Concerted Action on Thrombosis and Disabilities (ECAT). The Concerted Action was at that time under the auspices of the Commission of the European Union. The second edition, like the first edition, deals with diagnostic tests within the field of thrombosis. However, the second edition has a broader scope because it is no longer limited by the frontiers of ECAT. Experts allover the world, in and outside ECAT, have contributed to this edition. The editors are very grateful for their contributions. The need for a new edition is obvious. Since 1992 new assays have been introduced for research, diagnosis, and therapy of thrombosis; for other assays improvements have been suggested, while a few others became redundant. The editors waived the radioimmunoassays of ~-thrombog1obulin and platelet factor 4 due to the fact that the kits required for these assays are rarely, or no longer, available. Also the PAI-1 activity assay was waived as it is liable to many inconsistencies and to large variations. A list of names and addresses of manufacturers marketing the kits and reagents has been compiled, together with a list of the recommended nomenclature of quantities in thrombosis and haemostasis, in order to facilitate the use of the updated version. These lists have been carefully compiled by Johannes J. Sidelmann, PhD, Department of Clinical Biochemistry in Esbjerg, Denmark.

Download or read book Bioremediation and Biotechnology written by Khalid Rehman Hakeem and published by Springer Nature. This book was released on 2020-01-26 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Toxic substances threatens aquatic and terrestrial ecosystems and ultimately human health. The book is a thoughtful effort in bringing forth the role of biotechnology for bioremediation and restoration of the ecosystems degraded by toxic and heavy metal pollution. The introductory chapters of the book deal with the understanding of the issues concerned with the pollution caused by toxic elements and heavy metals and their impacts on the different ecosystems followed by the techniques involved in monitoring of the pollution. These techniques include use of bio-indicators as well as modern techniques for the assessment and monitoring of toxicants in the environment. Detailed chapters discussing the role of microbial biota, aquatic plants, terrestrial plants to enhance the accumulation efficiency of these toxic and heavy metals are followed by remediation techniques involving myco-remediation, bio-pesticides, bio-fertilizers, phyto-remediation and rhizo-filtration. A sizable portion of the book has been dedicated to the advanced bio-remediation techniques which are finding their way from the laboratory to the field for revival of the degraded ecosystems. These involve bio-films, micro-algae, genetically modified plants and filter feeders. Furthermore, the book is a detailed comprehensive account for the treatment technologies from unsustainable to sustainable. We believe academicians, researchers and students will find this book informative as a complete reference for biotechnological intervention for sustainable treatment of pollution.