Download or read book Anatase to Rutile Transition in Titanium Dioxide Photocatalytic Nanomaterials written by Ciara Byrne and published by . This book was released on 2019 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anatase and brookite are both considered metastable phases and transition irreversibly into the thermodynamically stable rutile phase at elevated temperatures (600-700°C in pure synthetic TiO2). Anatase TiO2 is widely accepted as the most photocatalytically active phase. However, TiO2 is only active under Ultraviolet (UV) light (~4% sunlight). A chemical precursor modifier, chemical additive or dopant can be used to alter the transition temperature and increase the photocatalytic activity of TiO2. These chemical additives/dopants/modifiers can result in a higher transition temperature and photocatalytic activity. However, some additives/dopants/modifiers have been known to reduce both. This work examined the effects benzoic acid, tungsten and boron nitride had on the transition temperature and the photodegradation of 1,4-dioxane. Benzoic acid and tungsten doping all increased the transition temperature compared to the control, with anatase still present at 800°C and 950°C respectively. All doped boron nitride samples were 100% rutile by 700°C, however the 0% BN-TiO2 was 100% rutile from 600°C. There were varying results when examining the percent removal of 1,4-dioxane. Benzoic acid, tungsten and boron nitride showed increased photocatalytic activity. Out of all of the samples examined, only 3 samples showed 100% removal of 1,4-dioxane, these were 2% W-TiO2, 4% W-TiO2 and 8% W-TiO2 at 800°C. When comparing the results for the transition temperature and photocatalytic activity of all dopants studied, 8% W-TiO2 is considered the optimim dopant and concentration. This is due to 26% anatase still being present at 950°C and it showed 100% and ~80% 1,4-dioxane removal when calcined at 800°C and 900°C respectively. The current investigation therefore showed that using the sol-gel method for doping with tungsten, benzoic acid and boron nitride successfully improved the anatase to rutile transition temperature and photocatalytic activity of TiO2.
Download or read book Nanostructured Titanium Dioxide in Photocatalysis written by It-Meng Low and published by CRC Press. This book was released on 2021-06-18 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium dioxide (TiO2) has drawn considerable attention as an attractive inorganic raw material for various applications due to its inexpensiveness, nontoxic nature, stability, and excellent photocatalytic activity. Photocatalysis is one of the most promising route for sustainable chemistry of the 21st century. It can contribute to solving environmental, global energy, and chemical problems, as well as to the sustainable production of commodities in the near future. This book presents the fundamentals of photocatalysis in nanostructured TiO2 and describes the factors affecting the photocatalytic activity, design, and synthesis of various forms of nanostructured TiO2. It highlights the use of ion-doping and inert-atmosphere annealing to extend the light-absorption range of photocatalysts and reduce recombination between electrons and holes. It discusses numerous applications in the fields of energy and environment, such as water purification, gas sensing, storage and delivery, and energy generation. The book is an invaluable resource and useful guide for a broad readership in various fields of catalysis, materials science, environment, and energy.
Download or read book Application of Titanium Dioxide written by Magdalena Janus and published by BoD – Books on Demand. This book was released on 2017-07-26 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium dioxide is mainly used as a pigment and photocatalyst. It is possible to find it in food, cosmetics, building materials, electric devices, and others. This book contains chapters about application of titanium dioxide in different branches of economy such as the agriculture, the food industry, the medicine, the cosmetics, the water treatment technologies, and the semiconductors.
Download or read book Titanium Dioxide written by Magdalena Janus and published by BoD – Books on Demand. This book was released on 2017-07-26 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium dioxide is mainly used as a pigment and photocatalyst. It is possible to find it in food, cosmetics, building materials, electric devices, and others. This book contains chapters about characteristics of anatase and rutile crystallographic structure of titanium dioxide and the use of theoretical calculation for photoactivity determination.
Download or read book TiO2 Nanoparticles written by Aiguo Wu and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique book that summarizes the properties, toxicology, and biomedical applications of TiO2-based nanoparticles Nanotechnology is becoming increasingly important for products used in our daily lives. Nanometer-sized titanium dioxide (TiO2) are widely used in industry for different purposes, such as painting, sunscreen, printing, cosmetics, biomedicine, and so on. This book summarizes the advances of TiO2 based nanobiotechnology and nanomedicine, covering materials properties, toxicological research, and biomedical application, such as antibacter, biosensing, and cancer theranostics. It uniquely integrates the TiO2 applications from physical properties, toxicology to various biomedical applications, and includes black TiO2 based cancer theranostics. Beginning with a comprehensive introduction to the properties and applications of nanoparticles, TiO2 Nanoparticles: Applications in Nanobiotechnology, Theranostics and Nanomedicine offers chapters on: Toxicity of TiO2 Nanoparticles; Antibacterial Applications of TiO2 Nanoparticles; Surface Enhanced Raman Spectrum of TiO2 Nanoparticle for Biosensing (TiO2 Nanoparticle Served as SERS Sensing Substrate); TiO2 as Inorganic Photosensitizer for Photodynamic Therapy; Cancer Theranostics of Black TiO2 Nanoparticles; and Neurodegenerative Disease Diagnostics and Therapy of TiO2-Based Nanoparticles. This title: -Blends the physical properties, toxicology of TiO2 nanoparticles to the many biomedical applications -Includes black TiO2 based cancer theranostics in its coverage -Appeals to a broad audience of researchers in academia and industry working on nanomaterials-based biosensing, drug delivery, nanomedicine TiO2 Nanoparticles: Applications in Nanobiotechnology, Theranostics and Nanomedicine is an ideal book for medicinal chemists, analytical chemists, biochemists, materials scientists, toxicologists, and those in the pharmaceutical industry.
Download or read book Titanium Dioxide Photocatalysis written by Vladimiro Dal Santo and published by MDPI. This book was released on 2019-05-27 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the seminal work of Fujishima et al. dates back to 1971, TiO2 still remains the most diffused and studied semiconductor, employed in photo-oxidation processes for cleantech (i.e., polluted water and air treatment), in solar fuel production (mainly hydrogen production by water photo splitting), and in Carbon Capture and Utilization (CCU) processes by CO2 photoreduction. The eleven articles, among them three reviews, in this book cover recent results and research trends of various aspects of titanium dioxide photocatalysis, with the chief aim of improving the final efficiency of TiO2-based materials. Strategies include doping, metal co-catalyst deposition, and the realization of composites with plasmonic materials, other semiconductors, and graphene. Photocatalysts with high efficiency and selectivity can be also obtained by controlling the precise crystal shape (and homogeneous size) and the organization in superstructures from ultrathin films to hierarchical nanostructures. Finally, the theoretical modeling of TiO2 nanoparticles is discussed and highlighted. The range of topics addressed in this book will stimulate the reader’s interest as well as provide a valuable source of information for researchers in academia and industry.
Download or read book Titanium Dioxide written by Dongfang Yang and published by BoD – Books on Demand. This book was released on 2018-06-27 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium dioxide is currently being used in many industrial products. It provides unique photocatalytic properties for water splitting and purification, bacterial inactivation, and organics degradation. It has also been widely used as the photoanode for dye-sensitized solar cells and coatings for self-cleaning surfaces, biomedical implants, and nanomedicine. This book covers various aspects of titanium dioxide nanomaterials including their unique one-dimensional, two-dimensional, mesoporous, and hierarchical nanostructures and their synthetic methods such as sol-gel, hydrothermal, anodic oxidation, and electrophoretic deposition, as well as its key applications in environmental and energy sectors. Through these 24 chapters written by experts from the international scientific community, readers will have access to a comprehensive overview of the recent research and development findings on the titanium dioxide nanomaterials.
Download or read book Photocatalysts written by Sher Bahadar Khan and published by BoD – Books on Demand. This book was released on 2019-03-06 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book enlightens the type, chemical structure, and application of photo-catalysts. It covers the recent developments in photo-catalysts and their applications, particularly in photo-catalytic degradation of different organic pollutants, hydrogen production, etc. It provides a concise but complete coverage and overview of photocatalysts and their recent advances for a broad audience: beginners, graduate students, and specialists in both academic and industrial sectors.
Download or read book Updates on Titanium Dioxide written by Bochra Bejaoui and published by BoD – Books on Demand. This book was released on 2023-08-30 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium dioxide (TiO2) has received a lot of attention due to its inexpensive cost, benign nature, and great photocatalytic potential. TiO2 has numerous applications, including in photocatalysts, Li-ion batteries, solar cells, and medical research. However, its performance is unsatisfactory due to a variety of issues, including a wide band gap (3.01 to 3.2 eV) and quick electron–hole pair recombination (1012 to 1011 s). Many efforts have been made to improve the qualities of TiO2, such as structural and dopant changes, which expand its applications. This book focuses on the properties of TiO2-modified nanoparticles, including their synthesis, alterations, and applications.
Download or read book Black Tio2 Nanomaterials For Energy Applications written by Xiaobo Chen and published by World Scientific. This book was released on 2016-12-08 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'This book not only provides a fundamental technical background on black TiO2 and the synthesis of this material, it also covers state-of-the-art applications and will provide the reader with current information on property behavior and show the direction of the latest research for this interesting material for energy applications.'IEEE Electrical Insulation MagazineThe transformation of titanium dioxide (TiO2) nanomaterials from white to black using disorder engineering has meant a dramatic increase in their performance in photocatalytic experiments. The efficiency with which black TiO2 nanomaterials can use sunlight to split water molecules for the production of hydrogen is significantly improved compared to using white crystals, and this pure hydrogen can then be used in batteries and fuels. The black TiO2 nanomaterials are also very promising in CO2 conversion, water treatment, and in air quality control.This book aims to present the recent progress on the research of black TiO2 nanomaterials, and how they can be used in a number of clean energy applications. The text covers a number of research topics, including the synthesis of black TiO2 nanomaterials (nanoparticles, nanowires and nanotubes) and their properties, the effect of point defects and ordered/disordered morphology, the applications in charge storage and photoelectrochemical water splitting, use in lithium ion batteries and in microwave absorption. Also included is a theoretical analysis of this research, thereby providing a comprehensive review of the subject for students, researchers and practitioners in catalytic science, materials science, nanotechnology, green technology, and chemistry.
Download or read book Nanostructured Titanium Dioxide Materials written by Ali Reza Khataee and published by World Scientific. This book was released on 2012 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decade, research and development in the area of synthesis and applications of different nanostructured titanium dioxide have become tremendous. This book briefly describes properties, production, modification and applications of nanostructured titanium dioxide focusing in particular on photocatalytic activity. The physicochemical properties of nanostructured titanium dioxide are highlighted and the links between properties and applications are emphasized. The preparation of TiO2 nanomaterials, including nanoparticles, nanorods, nanowires, nanosheets, nanofibers, and nanotubes are primarily categorized by their preparation method (sol-gel and hydrothermal processes). Examples of early applications of nanostructured titanium dioxide in dye-sensitized solar cells, hydrogen production and storage, sensors, rechargeable batteries, electrocatalysis, self-cleaning and antibacterial surfaces and photocatalytic cancer treatment are reviewed. The review of modifications of TiO2 nanomaterials is mainly focused on the research related to the modifications of the optical properties of TiO2 nanomaterials, since many applications of TiO2 nanomaterials are closely related to their optical properties. Photocatalytic removal of various pollutants using pure TiO2 nanomaterials, TiO2-based nanoclays and non-metal doped nanostructured TiO2 are also discussed.
Download or read book Introduction to Ceramics written by W. David Kingery and published by John Wiley & Sons. This book was released on 1976-05-04 with total page 1060 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 2nd edition of Introduction to Ceramics has been printed 15 years after the 1st edition. Many advances have been made in understanding and controlling and developing new ceramic processes and products. this text has a considerable amount of new material and the product modification.
Download or read book Photocatalytic Activity Enhancement of Titanium Dioxide Nanoparticles written by Mohamed A. Barakat and published by Springer. This book was released on 2015-10-26 with total page 39 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this brief, a comprehensive review of the UV/visible-TiO2 photocatalytic oxidation process is presented with an insight into the mechanisms involved, the role of titanium dioxide as a catalyst, irradiation sources, types of reactors, and a comparison between various modes of TiO2 application. An overview of the development and enhancement of the activity of TiO2 nanoparticles in photocatalysis is presented. The topics covered include a detailed look at the unique properties of the TiO2 nanoparticles and their relationship to photocatalytic properties. The utilization of the TiO2 nanoparticles as photocatalysts, in the non-doped and doped forms is also reviewed. Finally, the use of modified TiO2 nanoparticles has made a significant contribution in providing definitive mechanistic information regarding the visible light photocatalytic processes.
Download or read book Sol Gel Synthesis and Characterisation of Novel Metal Oxide Nanomaterials for Photocatalytic Applications written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents a study of the effect of chemical modifiers and dopants on both the anatase to rutile transformation and also the photocatalytic efficiency of semiconductor nanomaterials. The main focus of the work is based on the crystallisation and phase transformation of the widely investigated semiconductor metal oxide, titanium dioxide (TiO2) Of the three polymorphs associated with titanium dioxide, anatase is widely regarded as the most effective photocatalyst. Typically anatase will transform to rutile in the temperature range 600 - 700 °C however, modification of a titanium precursor with a chelating agent can result in extended transformation temperature. The effect of employing various concentrations of formic acid and water on phase transition is systematically studied by XRD, FTIR and Raman spectroscopy (Chapter 3). Retention of anatase (41%) at increased temperatures (800 °C) and 10% at 900 °C is achieved at optimum conditions. On comparison, a control sample prepared without modification with formic acid show rutile formation at 600 °C. FTIR and Raman studies indicate that a bridging titanium-formate structure is formed upon addition of titanium isopropoxide to formic acid. It is proposed that under different reaction conditions, a syn-syn or synanti bridging structure is favoured. It is concluded that the syn-anti bridging structure hinders cross linking of the metal oxide oligomer network, resulting in a weakened structure, facilitating low temperature rutile formation when compared with the syn-syn binding mode which forms a more ordered network, stabilising anatase at increased temperatures. Using the optimum formic acid, titanium isopropoxide molar ratios (TTIP:FA:H2O, 1:4:4) obtained in chapter 3, silver (1, 3 and 5 mol %) was added to the system and the effects are reported (chapter 4). Through XRD it is shown that silver lowers the anatase to rutile transformation temperature. Samples calcined at 700 °C show that 5 mol % Ag-TiO2 contains b.
Download or read book Synthesis and Utilization of Titanium IV Dioxide Nanomaterials and Its Derivatives written by Michael James Dahl and published by . This book was released on 2015 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: The titanium glycolate coating method can also incorporate additional metals into the precursor mixture to obtain a doped TiO2 shell which can extend the light absorption into the visible range. Additionally, a study of the effect of the metal dopant on the crystalline grain size of the obtained product has been done as well. An increase or decrease in grain size relative to pure TiO 2 can be predicted by if the metal typically promotes or inhibits the anatase to rutile phase transition.
Download or read book Sonochemistry and Sonoluminescence written by L.A. Crum and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sonochemistry is studied primarily by chemists and sonoluminescence mainly by physicists, but a single physical phenomenon - acoustic cavitation - unites the two areas. The physics of cavitation bubble collapse, is relatively well understood by acoustical physicists but remains practically unknown to the chemists. By contrast, the chemistry that gives rise to electromagnetic emissions and the acceleration of chemical reactions is familiar to chemists, but practically unknown to acoustical physicists. It is just this knowledge gap that the present volume addresses. The first section of the book addresses the fundamentals of cavitation, leading to a more extensive discussion of the fundamentals of cavitation bubble dynamics in section two. A section on single bubble sonoluminescence follows. The two following sections address the new scientific discipline of sonochemistry, and the volume concludes with a section giving detailed descriptions of the applications of sonochemistry. The mixture of tutorial lectures and detailed research articles means that the book can serve as an introduction as well as a comprehensive and detailed review of these two interesting and topical subjects.
Download or read book Metal Metal Oxides and Metal Organic Frameworks for Environmental Remediation written by Saravanan Rajendran and published by Springer Nature. This book was released on 2021-05-05 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews principles, techniques and applications of metal, metal oxides, metal sulfides and metal-organic frameworks for removal and degradation of pollutants. Natural materials are often much more advanced than synthetic materials in terms of circularity and are functional, often biodegradable, recyclable and generate little waste. They are, therefore, a source of inspiration for new synthetic materials. In particular, recent research has focused on various types of functional materials such as organic, inorganic, nanostructured and composites for the remediation of environmental pollution.
