Download or read book Analytical Performance Models for Material Control Strategies in Manufacturing Systems written by Ananth Krishnamurthy and published by . This book was released on 2002 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stochastic Modeling of Manufacturing Systems written by George Liberopoulos and published by Springer Science & Business Media. This book was released on 2005-12-12 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing systems rarely perform exactly as expected and predicted. Unexpected events, such as order changes, equipment failures and product defects, affect the performance of the system and complicate decision-making. This volume is devoted to the development of analytical methods aiming at responding to variability in a way that limits its corrupting effects on system performance. The book includes fifteen novel chapters that mostly focus on the development and analysis of performance evaluation models of manufacturing systems using decomposition-based methods, Markovian and queuing analysis, simulation, and inventory control approaches. They are organized into four distinct sections to reflect their shared viewpoints: factory design, unreliable production lines, queuing network models, production planning and assembly.
Download or read book Stochastic Modeling and Optimization of Manufacturing Systems and Supply Chains written by J. George Shanthikumar and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume originates from two workshops, both focusing on themes that are reflected in the title of the volume. The first workshop took place at Eindhoven University of Technology, April 24-26, 2001, on the occasion of the University granting a doctorate honoris causa to Profes sor John A. Buzacott. The second workshop was held on June 15, 2002 at Cornell University (preceding the annual INFORMSjMSOM Confer ence), honoring John's retirement and his lifetime contributions. Each of the two workshops consisted of about a dozen technical presentations. The objective of the volume, however, is not to simply publish the proceedings of the two workshops. Rather, our objective is to put to gether a select set of articles, each organized into a well-written chapter, focusing on a timely topic. Collected into a single volume, these chapters aim to serve as a useful reference for researchers and practitioners alike, and also as reading materials for graduate courses or seminars.
Download or read book Handbook of Stochastic Models and Analysis of Manufacturing System Operations written by James MacGregor Smith and published by Springer. This book was released on 2013-05-18 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook surveys important stochastic problems and models in manufacturing system operations and their stochastic analysis. Using analytical models to design and control manufacturing systems and their operations entail critical stochastic performance analysis as well as integrated optimization models of these systems. Topics deal with the areas of facilities planning, transportation, and material handling systems, logistics and supply chain management, and integrated productivity and quality models covering: • Stochastic modeling and analysis of manufacturing systems • Design, analysis, and optimization of manufacturing systems • Facilities planning, transportation, and material handling systems analysis • Production planning, scheduling systems, management, and control • Analytical approaches to logistics and supply chain management • Integrated productivity and quality models, and their analysis • Literature surveys of issues relevant in manufacturing systems • Case studies of manufacturing system operations and analysis Today’s manufacturing system operations are becoming increasingly complex. Advanced knowledge of best practices for treating these problems is not always well known. The purpose of the book is to create a foundation for the development of stochastic models and their analysis in manufacturing system operations. Given the handbook nature of the volume, introducing basic principles, concepts, and algorithms for treating these problems and their solutions is the main intent of this handbook. Readers unfamiliar with these research areas will be able to find a research foundation for studying these problems and systems.
Download or read book Handbook of Industrial and Systems Engineering Second Edition written by Adedeji B. Badiru and published by CRC Press. This book was released on 2013-10-11 with total page 1480 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new edition of a bestselling industrial and systems engineering reference, Handbook of Industrial and Systems Engineering, Second Edition provides students, researchers, and practitioners with easy access to a wide range of industrial engineering tools and techniques in a concise format. This edition expands the breadth and depth of coverage, emphasizing new systems engineering tools, techniques, and models. See What’s New in the Second Edition: Section covering safety, reliability, and quality Section on operations research, queuing, logistics, and scheduling Expanded appendix to include conversion factors and engineering, systems, and statistical formulae Topics such as control charts, engineering economy, health operational efficiency, healthcare systems, human systems integration, Lean systems, logistics transportation, manufacturing systems, material handling systems, process view of work, and Six Sigma techniques The premise of the handbook remains: to expand the breadth and depth of coverage beyond the traditional handbooks on industrial engineering. The book begins with a general introduction with specific reference to the origin of industrial engineering and the ties to the Industrial Revolution. It covers the fundamentals of industrial engineering and the fundamentals of systems engineering. Building on this foundation, it presents chapters on manufacturing, production systems, and ergonomics, then goes on to discuss economic and financial analysis, management, information engineering, and decision making. Two new sections examine safety, reliability, quality, operations research, queuing, logistics, and scheduling. The book provides an updated collation of the body of knowledge of industrial and systems engineering. The handbook has been substantively expanded from the 36 seminal chapters in the first edition to 56 landmark chapters in the second edition. In addition to the 20 new chapters, 11 of the chapters in the first edition have been updated with new materials. Filling the gap that exists between the traditional and modern practice of industrial and systems engineering, the handbook provides a one-stop resource for teaching, research, and practice.
Download or read book Dynamic Stochastic Optimization written by Kurt Marti and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uncertainties and changes are pervasive characteristics of modern systems involving interactions between humans, economics, nature and technology. These systems are often too complex to allow for precise evaluations and, as a result, the lack of proper management (control) may create significant risks. In order to develop robust strategies we need approaches which explic itly deal with uncertainties, risks and changing conditions. One rather general approach is to characterize (explicitly or implicitly) uncertainties by objec tive or subjective probabilities (measures of confidence or belief). This leads us to stochastic optimization problems which can rarely be solved by using the standard deterministic optimization and optimal control methods. In the stochastic optimization the accent is on problems with a large number of deci sion and random variables, and consequently the focus ofattention is directed to efficient solution procedures rather than to (analytical) closed-form solu tions. Objective and constraint functions of dynamic stochastic optimization problems have the form of multidimensional integrals of rather involved in that may have a nonsmooth and even discontinuous character - the tegrands typical situation for "hit-or-miss" type of decision making problems involving irreversibility ofdecisions or/and abrupt changes ofthe system. In general, the exact evaluation of such functions (as is assumed in the standard optimization and control theory) is practically impossible. Also, the problem does not often possess the separability properties that allow to derive the standard in control theory recursive (Bellman) equations.
Download or read book Modeling and Analysis of Manufacturing Systems written by Ronald G. Askin and published by John Wiley & Sons. This book was released on 1993-01-18 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing models - Assembly lines : reliable serial systems - Transfer lines and general serial systems - Shop scheduling with many products - Flexible manufacturing systems - Machine setup and operation sequencing - Material handling systems - Warehousing : storage and retrieval systems - General manufacturing systems : analytical queueing models - General manufacturing systems : empirical simulation models.
Download or read book Department of Defense Sponsored Information Security Research written by Department of Defense and published by John Wiley & Sons. This book was released on 2007-09-11 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: After September 11th, the Department of Defense (DoD) undertook a massive and classified research project to develop new security methods using technology in order to protect secret information from terrorist attacks Written in language accessible to a general technical reader, this book examines the best methods for testing the vulnerabilities of networks and software that have been proven and tested during the past five years An intriguing introductory section explains why traditional security techniques are no longer adequate and which new methods will meet particular corporate and industry network needs Discusses software that automatically applies security technologies when it recognizes suspicious activities, as opposed to people having to trigger the deployment of those same security technologies
Download or read book Modeling Manufacturing Systems written by Paolo Brandimarte and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced modeling techniques are a necessary tool in order to design and manage manufacturing systems effectively. This book contains a set of tutorial chapters on topics ranging from aggregate production planning to real time control, including predictive and reactive scheduling, flow management in assembly systems, simulation of robotic cells, design of manufacturing systems under uncertainty and a historical perspective on production management philosophies. The book will be of interest both to researchers and practitioners, including graduate students in Manufacturing Engineering and Operations Research.
Download or read book Analysis and Modeling of Manufacturing Systems written by Stanley B. Gershwin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and Modeling of Manufacturing Systems is a set of papers on some of the newest research and applications of mathematical and computational techniques to manufacturing systems and supply chains. These papers deal with fundamental questions (how to predict factory performance: how to operate production systems) and explicitly treat the stochastic nature of failures, operation times, demand, and other important events. Analysis and Modeling of Manufacturing Systems will be of interest to readers with a strong background in operations research, including researchers and mathematically sophisticated practitioners.
Download or read book Material Flow based Analysis of Manufactured Housing Production Plant Facility Layout written by Deblina Banerjee and published by . This book was released on 2003 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Production Control Strategies written by Christoph Karrer and published by Springer Science & Business Media. This book was released on 2012-02-25 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Identifying and customizing suitable control strategies is a challenging task, especially when production systems have to cope with variable demands, forecast error, and unstable processes. The focus of this book lies on helping companies with complex and discrete production systems to tailor a production control strategy to their needs. Thereby, the mutual merits of “push” and “pull” systems are taken into account, leading to hybrid strategies. Consequently, the book addresses practitioners who are interested in looking behind the scenes and into the physics of production control. A real-life case study demonstrates the practical applicability of the presented framework.
Download or read book Performance Analysis of Manufacturing Systems written by Tayfur Altiok and published by Springer. This book was released on 2012-10-30 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing industries are devoted to producing high-quality products in the most economical and timely manner. Quality, economics, and time not only indicate the customer-satisfaction level, but also measure the manufacturing per formance of a company. Today's manufacturing environments are becoming more and more complex, flexible, and information-intensive. Companies invest into the information technologies such as computers, communication networks, sensors, actuators, and other equipment that give them an abundance of information about their materials and resources. In the face of global competition, a manufacturing company's survival is becoming more dependent on how best this influx of in formation is utilized. Consequently, there evolves a great need for sophisticated tools of performance analysis that use this information to help decision makers in choosing the right course of action. These tools will have the capability of data analysis, modeling, computer simulation, and optimization for use in designing products and processes. International competition also has had its impact on manufacturing education and the government's support of it in the US. We see more courses offered in this area in industrial engineering and manufacturing systems engineering departments, operations research programs, and business schools. In fact, we see an increasing number of manufacturing systems engineering departments and manufacturing research centers in universities not only in the US but also in Europe, Japan, and many developing countries.
Download or read book Setting Production Card Levels for the CONWIP Material Control Strategy in Multiproduct Manufacturing Systems written by Rahul Suresh Shinde and published by . This book was released on 2005 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling Simulation And Control Of Flexible Manufacturing Systems A Petri Net Approach written by Kurapati Venkatesh and published by World Scientific. This book was released on 1999-01-29 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: One critical barrier leading to successful implementation of flexible manufacturing and related automated systems is the ever-increasing complexity of their modeling, analysis, simulation, and control. Research and development over the last three decades has provided new theory and graphical tools based on Petri nets and related concepts for the design of such systems. The purpose of this book is to introduce a set of Petri-net-based tools and methods to address a variety of problems associated with the design and implementation of flexible manufacturing systems (FMSs), with several implementation examples.There are three ways this book will directly benefit readers. First, the book will allow engineers and managers who are responsible for the design and implementation of modern manufacturing systems to evaluate Petri nets for applications in their work. Second, it will provide sufficient breadth and depth to allow development of Petri-net-based industrial applications. Third, it will allow the basic Petri net material to be taught to industrial practitioners, students, and academic researchers much more efficiently. This will foster further research and applications of Petri nets in aiding the successful implementation of advanced manufacturing systems.
Download or read book Manufacturing Systems Design and Analysis written by B. Wu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: A technological book is written and published for one of two reasons: it either renders some other book in the same field obsolete or breaks new ground in the sense that a gap is filled. The present book aims to do the latter. On my return from industry to an academic career, I started writing this book because I had seen that a gap existed. Although a great deal of information appeared in the published literature about various technical aspects of advanced manufacturing technology (AMT), surprisingly little had been written about the systems con text within which the sophisticated hardware and software of AMT are utilized to increase efficiency. Therefore, I have attempted in this book to show how structured approaches in the design and evaluation of modern manufacturing plant may be adopted, with the objective of improving the performance of the factory as a whole. I hope this book will be a contribution to the newly recognized, multidisciplinary engineering function known as manufacturing sys tems engineering. The text has been designed specifically to demonstrate the systems aspects of modern manufacturing operations, including: systems con cepts of manufacturing operation; manufacturing systems modelling and evalua tion; and the structured design of manufacturing systems~ One of the major difficulties associated with writing a text of this nature stems from the diversity of the topics involved. I have attempted to solve this problem by adopting an overall framework into which the relevant topics are fitted.
Download or read book Formal Methods in Manufacturing written by Javier Campos and published by CRC Press. This book was released on 2018-09-03 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Illustrated with real-life manufacturing examples, Formal Methods in Manufacturing provides state-of-the-art solutions to common problems in manufacturing systems. Assuming some knowledge of discrete event systems theory, the book first delivers a detailed introduction to the most important formalisms used for the modeling, analysis, and control of manufacturing systems (including Petri nets, automata, and max-plus algebra), explaining the advantages of each formal method. It then employs the different formalisms to solve specific problems taken from today’s industrial world, such as modeling and simulation, supervisory control (including deadlock prevention) in a distributed and/or decentralized environment, performance evaluation (including scheduling and optimization), fault diagnosis and diagnosability analysis, and reconfiguration. Containing chapters written by leading experts in their respective fields, Formal Methods in Manufacturing helps researchers and application engineers handle fundamental principles and deal with typical quality goals in the design and operation of manufacturing systems.
